How to connect E4200 to Wireless Dell Printer

I feel like i should know this...i set it up on my last wireless router my wrt54g......but now i cfan't figure out for the E4200 or the printer....please help!

You might have installed your router using the Cisco connect software. Open the Cisco connect software and go to Router settings. You will find the wireless network name and password.
Note down the password for the wireless network.
Search for the wireless network on your printer. Select your wireless network and enter the password. Once you connect to the wireless network, you will be able to print.

Similar Messages

How to connect to a Wireless HP Printer WPS Pin using Airport Extreme

I cannot figure out how to connect my Wireless HP Printer that uses a WPS Pin to my netword that has a Airport Extreme router?

http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_task=setupCategory&cc =us&dlc=en&lc=en&product=5109847 may help you.

HT4356 How to connect ipad2 to wireless cannon printer MX432 which also used by a dell computer

I just bought cannon mx432. I was able to set up my dell laptop but I'm unable to setup my ipad 2 . Could somebody please help . Would be much appreciated. Thanks

First check to see if its in the list of airprint enabled printers then folow instructions in article. If its not, then there are other options.
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
Print from iOS device to virtually any printer
http://www.lantronix.com/it-management/xprintserver/xprintserver.html

How to connect my cannon mx470 series printer with bluetooth to my mini mac?

how to connect my cannon mx470 series printer with Bluetooth to my mini mac

Does the printer actually support BlueTooth? If the printer is wireless, then most likely it uses Wi-Fi. Did you read the user guide that came with it? Or contact Canon tech support at their website.

How to connect HP TouchPad Wireless Keyboard to XBox One?

How can i connect a HP TouchPad Wireless Keyboard to XBox One?

Hi, Double post, pleae use: http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/How-to-connect-HP-TouchPad-Wireless-Keyboard-to-XBox-One/m-p/5139082 Thanks.

HT3500 i have a mac pro and have connected to my wireless canon printer. I was able to print but now the printer comes up with the paper in the tray is the wrong size. but the paper is A4. does any one know what is wrong.

I have connected to my wireless canon printer but it wont let me print from my mac pro. printer comes up with the message that the paper size doesnt match the printer settings. I have tried to change the settings on the printer but that didnt work. can anyone help

Well... no help was found here.. so I abandoned the wireless- ness of my printer. I bought a
small 10 port hub because only 2 USB ports really isn't enough with wireless mouse, wireless internet
and any kind of printer. I also bought a long USB cable. I now print--wired since this can be done
as an alternative to wireless with this printer. Because I don't want a cable "hanging around"
when the printer is not in use, I simple disconnect it and reconnect when I want to print.
It's a temporary solution others may find helpful as well. Apparently there's been a lot of
confusion and problems getting this printer set up wirelessly with our MacBooks.
Shame on HP for not helping us out!

HT3500 How to connect iphone with wireless printer

I have HP 8600 plus printer which is wireless connected. I need to print from iphone/ipad and would like to know how to give command from iphone/ipad to print or first detect a printer and print

Not sure of the specifics of your network/computers, I use Airprint Activator on my Mac which offers up any installed printer on the network as an 'Airprint' printer which iphones/ipads can see.
http://netputing.com/airprintactivator/airprint-activator-v2-0/
I'm not sure if a PC solution exists for this.

How to connect to my wireless printer to a PC workgroup?

It wont let me connect to the workgroup

Im trying to connect to my wireless printer from my MacBook pro, that is connected to my home P.C. **

How to connect Java into BarTender Label Printing Software

Hi,
I have one problem, my company have bartender label printing software 32 bit version, previously they use VB6 for controlling the dublicate printing of lable,but the software is gone. Now i want to do this in Java, but i don't know how to connect java into Bartender software.
my company using old version, it accept only VB6. My Boss said can buy new Bartender Software but i don't know how to link and control dublicate printing. if anybody knows this connection between Bartender and Java please help me.
if bartender New version support this features please send the link and example source code please help me.
AnbuAathi

Hi , i have the similar task ,where i need to connect my web portal application with the bartender software .I did a hugh R&D to integrate Java application with Bartender software but did not find any luck .So i request to provide the needed help to integrate my Java Application with Bartender software .
Thanks in Advance
Mohan

How to connect a E1200 wireless router to a machine tool network for wireless communications

Hello all, I am new to the forum, hope someone can help me out. I am wanting to connect my E1200 wireless router to a machine tool in our factory that has programmable controllers and is connected to the machine components via ethernet connections. This is so we can troubleshoot the machine without having a wired laptop. We have several ethernet switches on the machine and a range of IP addresses say from 192.16.1.1 through 192.16.1.150, and 192.16.17.1 through 192.16.17.150, all of the addresses are not used but random addresses in the range. I would like to be able to connect my E1200 to either one of the networks without having to make a change in the router setup. I can make it work on either network but when I switch my cable to the other network it has to be reconfigured. I am currently connecting my data cable to a ethernet port on the router and changing my router address from 192.168.1.1 to 192.16.1.1 and selecting a range of 150 so it will assign numbers as needed. This works great until I change to the other network and I have to change my router address to 192.16.17.1, I know this can be done on some routers because the technicians from the machine builder use them when working on the machines. thanks

On the basic setup tab make the changes shown below:
This basically make the router disappear off the existing networks and turns it into a wireless AP.
Then when you set your laptop's wireless adapter to whatever IP network you want to connect to.
If you need to connect to your router again change the laptop's adapter IP to something like 192.168.200.2
Keep in mind nothing ever gets plugged into the Internet Port on the router.
What I do with these manufacturing machine's is put them on the company network with static IP's. Then so operators can transfer programs and view drawings I place ELO touchscreens at each location. For the Laser cutter operators that do nesting they have a desktop workstation for the CAD software and put the nests on a network share or direct to the laser cutters.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

How to connect to a wireless network on a i mac g4

After I installed the airport card I restarted my router, I noticed other networks except for mines appeared. Any suggestions on what to do to access my wireless network?

Have you ever configured the network yourself (in terms of changing the network name/password, etc), or is it the same settings that Comcast created? You will need to find out the wifi speed and security before you can determine if it's compatible with your Airport card.
Sometimes the encryption type is written on a sticker on the router itself.
Often you can log into the router yourself, even with an ISP-managed router, and look at the settings. Do you have any other computers connected to the wireless network? Try to determine their local IP address, and that should tell you the router address. (e.g. on a Mac, go to System Preferences - Network). You would log into your router using http://192.168.1.1, for example, if that's the address.
Matt

How to connect to Linksys Wireless Print Server (WPS54GU2) from WIndows 7

I tried the Print Server Utility that was loaded from the WPS54GU2 user install disk. Ended up with an AddPort error.
Went ahead and created local printer for printer I was trying to get to (Epson Color Stylus 400). Did a "Printer Properties" on the printer after it is was created and clicked on the "Port" tab. Clicked on the "Add Port" button and selected "Standard TCP/IP Port" from list. Clicked on "New Port" . Wizard came up and clicked "Next" on this screen. I typed in the IP address of my Print Server (with no Port Name) and let it search for a while and it eventually failed. A screen came up requesting "additional port information" so I clicked on the "Custom" button and then clicked on the"Settings" button. Here I typed in the correct port name (which in my case was like LKxxxxxx where the x's are numerics). The IP address is already filed in. I checked the LPR button and made up a Queue Name and typed it into the Queue Name text box.
After clicking OK I tried printing to the printer and everything seemed to work correctly.
Message Edited by bionic_surfer on 11-14-2009 10:21 AM
Message Edited by bionic_surfer on 11-14-2009 10:21 AM

Corleone
I have the same issue as I have a new Windows 7 machine that is hardwired to my Linksys WPS54G. This is my main office PC and I have other computers throughout the house that are connected wirelessly to the WPS54G. I've tried to create a new port for printing based on the posts from other users but it still won't work. I've run the Linksys configuration and my PC sees the printer server. Am I missing a step?
Here is what I've done
Go to ports
Add new port
Standard TCP/IP Port
Click new port (Wizard comes up)
Enter printer name and IP address ( I enter my IP address for the Print Server 192.168.1.x)- Port name is same as IP Address (does this matter?)
Go to custom settings and set for LPR with Queue name of LP1 (or should it be L1?)
LPR Byte count box checked
Click next and finish
Do I need to restart my computer?
What am I missing
Thank you

How to connect iPad to wireless printer

How do I connect my iPad to my cannon mg 5220 printer

This printer is not AirPrint compatible but you can still print photos, documents, and scanned items using these free Canon Apps in the AppStore:
Pixma Print
Canon iEPP
There's also a commercial app called Print n Share that will let you print web pages from Safari

How to connect to a network dell laser printer 3010cn?

I have the drivers on the original CD but the Mac does not launch it and just give the option in the submenu to eject or get info...not usefull really! If anyone have a solution they are more than welcome to provide them.
For info , the printer is shared on a network which can be use on the second computer (Windows) but not on the Mac...
Thank you for your precious help .

Hi again Fred,
Ya a little research and I see there doesn't seem to be any Mac support for that printer. Too bad. I guess a good reason to stick with the various printer manufacturers who don't care about which operating system you use (Epson, Brother, Canon, etc.).
As Luvlabs mentioned, Brother has some nice printers that work great with the Mac. My mother-in-law bought a MFC-490CW she runs off her Windows XP system, but it is a wireless printer, so our HP laptop and my new iMac all see and print to that printer great, even though it is on the other side of the house. Of course this one isn't a laser printer, but instead an ink jet, but the point is Brother appears to fully support Macs with their software and drivers.
Best of luck,
Patrick

Connect iPad mini wirelessly to printer

How do I connect my iPad mini wirelessly to hp photosmart c6380 printer

Hi,
Your printer is not in the following list:
    http://support.apple.com/kb/ht4356
and not in the following list:
   http://h10025.www1.hp.com/ewfrf/wc/document?cc=hr&dlc=hr&docname=c02814760&lang=hr&lc=en&product=391...
Please try:
   http://www.google.com/landing/cloudprint/
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to connect E4200 to Wireless Dell Printer

Similar Messages

Maybe you are looking for