How to connect Encore WT8-B-102 to the TV

hi,
I have toshiba encore wt8 b 102. I dont have micro hdmi, only micro usb. How can I connect my tablet to tv (no wifi) ?
Message was edited by: kropek

According to the Toshiba ENCORE WT8-A-102 specification page, the table supports the micro HDMI out port.
This port can be used in order to connect the table to the TVs HDMI IN port.
Of course this requires the usage of micro HDMI to HDMI cable

Similar Messages

Forgot password on Encore WT8-A-102

Hi, everyone! I forgot the password on my Toshiba Encore WT8-A-102 tablet and I don't have a recovery USB FlashDrive. Please someone help me with the password reset...

Originally Posted by Eldorado
You don’t need a recovery USB flash drive to recover the Win 8 tablet.
You can start the recovery using the HDD recovery procedure.
If you want to access the boot menu on Toshiba Windows 8 / 8.1 tablet devices and you don't have a keyboard attached please press and hold the "Vol+" button and turn on the device.
After a few seconds the boot option menu will appear. Select "HDD Recovery" and the rest of the procedure is similar to the Windows 8 recovery process.
http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
handy info there Eldorado , cheers

How to connect a Sony Bravia TV to the internet through your Airport network

Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

I have now had a detailed reply from Sony Europe and the way to do this is to:
1.       Press Home on the TV Setup
2.       Use the right and left arrow to select Setting.
3.       Use the up and down to select Network, press Enter.
4.       Select Network Setup.
5.       Select Wireless setup.
6.       Select Scan
7.       Select your network
8.       A new screen will appear asking for entering the security key.
9.       Enter your WPA2 key.
10.   Select Enter.
11.   It will take you back to the same screen asking for entering the
security key.
12.   Press the right arrow.
13.   Select Auto.
14.   Press the right arrow.
15.   Select Save and connect.
These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

How to connect our outbound function module to the message type

how to connect our outbound function module to the message type any transcation code exits to assign the message type with the function module .
Thank in advance .
A. Thiru

Hi Thiru,
Standard Transaction Codes, have their own Function Modules for generating Outbound/Indbound Idocs. Where these Function Modules will be configured to a particular Process Codes.
For E.g for PO's
Process code : ME10 - IDOC_OUTPUT_ORDERS - for creation
In case if its a Z Function Module, It depends on the case how you use IDOC types. either directly through Z Program or through Inbound/Outbound Process codes with respective Function modules.
Regards,
Anbalagan

How to connect to an other computer through the internet

Please who can help me with Desktop Remote control and connecting through the internet. I know a lot is written about it, but it is still confusing.
So try to explain my situation:
I have an MacBook pro with Desktop Remote Control 3
The other computer:
Apple PowerBook which is connected through and Thomson Speedtouch (wireless 716)
External IP address xx.xx.xx.xx
Internal IP address 192.168.1.66
No firewalls
My questions:
How do I check if my Thomson Speedtouch the ports 5900 and 32?? are open?
How can I open the ports on the router? Do I have to open the port on the router?
Then on the MacBook Pro, I start up ARD3
How do I scan for the computer on Internet? Do I use the external IP address?
How can I then connect to the Apple PowerBook? I cannot fill in the second internal IP address or do I?
I hope someone can help me.
If more info is needed, please ask me.
Thank you....
Hans

Neil thank you for your answer.
I opened Network Utility. Went to the last Tab "Port Scan"
I typed in: external IP address (i got this through the Widget SysStat which shows external IP)
Than I gave up scan between the ports 5890 - 5910 to check if those ports are open or not. I had to way for a moment, and then the result was: "Port Scan has completed....."
Ok, what do I know know? The ports are open or not?
So please can someone help me with the following:
1) What should the result show me from Network utility?
2) Opening the port, this has to be done on the Router or is it something the Internet Service Provider needs to do?
3) I still have the question: how can I open the port, so with what application.
4) What are the exact ports which needs to be open?
5) About bridging in the router, does that have a special name. I didn't see in the router configuration program an option like that? When searching --> this is configured: A. Router-modem (NAT/PAT) - is there something special with NAT/PAT?
Hope someone can help me with a few of my questions.
Thanks

How to connect 2 or 3 externadisplays to the macbook pro 15" (mid 2010, i7)

I have a new MacbookPro (mid 2010, i7) I have 2 HP monitors (20") and a big TV (50") I am setting up a classroom. I want to display 1 screen on the TV (which is behind me) mirroring a secondary screen I have in front of me, and also have another secondary screen in front of me.
So far I tried connecting only 1 HP monitor and the TV connected to an HDMI splitter (after the minidisplay to HDMI adaptor) using an HDMI splitter, and I only get the image on the HP monitor, the TV is black.
I have been reading about the USB to DVI boxes and they seem to work but not with the latest MacbookPro (i5 and i7).
Anyone knows how to achieve this setup in my computer (1 HP (DVI) mirrored on a TV (HDMI) and an extra HP monitor (DVI))?
Thanks

You will need to talk to the tech support people at Matrox about whether or not you could do what you hope to do with a TripleHead2Go DP Edition. I suspect you would be limited to an undesirably low resolution (1360 x 768 or lower) on all three external displays. I don't know of any other possibility for such a setup, other than running it off a desktop computer with multiple graphics cards.
http://www.matrox.com/graphics/en/support/gxm/

How to unlock GNSS Encore WT8-A-102?

I tested all possible combinations with GNSS drivers (newest, olders) in Windows and always have one problem - GPS is locked.
All localization services in Windows is ON (no problem with services). GNSS good working only with Metro mode (Microsoft maps working OK).
Desktop mode = always locked. GNSS cannot support com virtualization mode = normal.
If I use GPS Reverse driver (emulated COM port) GnssDataInterface always says in Sensor state - is Llocked!
How unlock this sensor in desktop mode? Bios 1.6 and Windows and Automapa up to date.
I wan't use Automapa to navi program....
My English isn't sensational....
Perhaps somebody already solved this problem?

I’m a little bit confused about this message.
The tablet was equipped with GPS and the Windows 8.1 supports the location tracking.
The GPS driver is part of the system and everything you need to do is to tell the specific applications that it’s okay to track your location.
When you start a Windows 8.1 app that wants to use your location you will see a notification:
“do you want to turn on location services and allow (appname) to use your location”?
Then you have to click on the button “allow” or “block”.
The location settings can be found in:
Settings -> change PC settings -> privacy -> location
Here you can change the location settings for each app.

Encore WT8-A-102 - registration and different issues

Dear sir,
i try to register the product to your official site but gmail says the email adress [email protected] doesn't exist.
Are you really a serious company?
You advertise that the tablet has 5 MP camera ... where in hell you saw the 5 MP ...
In my windows phone i have 5 MP camera and if you compare the pictures of the table with ones of the phone you can see a HUGE difference with the phone pictures being superior of these of the tablet ... i have the tablet for 3 months , i have use it for about 30 hours max and the one problem comes to add to another problem ... now i can't take a picture ...the camera doesn't work.
For about a week i can't log in to my wifi cause the realtek chipset doesn't work all of a sudden ... and i want to ask you one more time "ARE YOU A SERIOUS COMPANY???" ... I don't think so ... please provide me with information on how i can replace this piece of crap that i bought cause i relied on Toshiba's name ... here in greece you don't have any offices , any telephone , any mail ???? the only mail you have doen't work ... For God sake .....
A very very angry and to totally disatisfied customer of yours ....

Im totally disatissfaid its unbeleivable you sell this product!! Which is tottaly useless! I was attracted by the specs but performance is just BELOW any acceptance!!!
1) I've used it past 4 days since I received it just to set it to be more USER FRIENDLY, and so far haven't solve ANYTHING! Its the most USER UNFRIENDLY PRODUCT I have ever owned! Even writing this post is absolute hell & struggle.
2) How can you falsely advertise it as "SKYPE OPTIMIZED" when its anything BUT Skype optimized!!!????
I have been struggling ever since I received it to connect to my old Skype account WHICH IS IMPOSSIBLE! WHY JUST WHY YOU ARE TORTURING CUSTOMERS SO MUCH TOSHIBA!!? Choosing terrible Windows for tablet is the worst thing you have done!!!
3) I managed to connect on new account on Skype&still impossible on old!!!, I was again so shocked!!! Both Cameras are just TERRIBLE , pictures are USELESS, C'MON its anything but 5Mb Camera, I can't even take any pic with it! My mom couldn't even see me or hear me! Mic is awful as well as WiFi! Then position of the cam! WHY ON EARTH YOU PUT FRONT CAM IN FAR RIGHT ANGLE! Ppl see only my right part of the eye when I try using this "skype optimized" tablet!!! My Chinese Thl5 phone is a blast machine for this dinosaur USELESS TABLET! I couldnt make any call on Skype cos picture is terrible, sound is terrible, wifi receiver is terrible, mic is terrible, they see only my far upper right forehead!!!
I've given up on using it for Skype- since its impossible!!!
4) Other rthings;
Its absolute hell to use it, or write anything on it!!! If I try different language keyboard it automatically change words in some unknown englush words!!! I gave up on using it since I dont want to spend 2hours writing a simple comment on FB or filling a web address!
If I forgot something its because is impossible even to write on it so I'll copy paste my other review down below!
5) And yes THIS IS ALSO VERY IMPORTANT - You have a terrible customer service in Serbia this must not happen!
They are rude, don't reply on questions even start an argue with a customer on FB! When I asked for a phone number who to call about the problems they behaved below any customer friendly standards! Im going to inform about this your Global headquarters.
6) I would like my money back, since this is utterly useless product, how can you refund me? I will gladly give you back this but your official representatives in Serbia are very rude and dont want to help me with this! Hopefully you will? Since I will never ever buy any of your product if you continue this user unfriendly policy.
Its been a terible pain even to write this comment on this tablet, I switch to my chinese phone and think to chuck this tablet down the window...
good bye toshiba, I am terribly dissapointed in you, even though I own more of your products it took me 2 hours to write this how user unfriendly this product is!

Encore WT8-A-102 - Working VGA Adapters

After trying a few HDMI to VGA adapters in shops I have found one which works online. (With the latest BIOS 1.60 and recently released platform drivers), thought it might be useful to others looking for one to have a list of confirmed working adapters.
This TMART one (Micro HDMI to VGA Adapter with Audio Cable White) works (~7 delivered)
(Id also like to make this not a question.. but cant see the option to do that anywhere)
edited

Thanks for sharing your experience!

When your ipad is disabled how to connect it to iTunes and get the password

Please help!!!

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How to connect my ipad2 to apple tv the first time

Having trouble connecting iPad 2 to apple tv.

I always have luck when I enable Home Sharing on both devices and go to the Apple TV and make sure AirPlay is enabled on it. Assuming both on same WiFi network successully, simply double click the home button on your iPad2 to expose the dock, finger swipe from left to right, and there will be an AirPlay icon, click it and available devices on the network that support AirPlay will show up in a list.

How to connect my time capsule & macbook to the internet?

I purchased a Time Capsule last weekend to back up all my photos etc. I was able to set up the Time Capsule with Airport Utility and now have my home network set up, I can easily get everything I need on my Macbook Pro (mid 2009, Mac OSX Lion 10.7.5 if that helps?) EXCEPT I can't get the time capsule to connect to the internet. For some reason whenever I want to access my pictures or the time capsule, I have to connect to the wireless network but if I want to connect to the internet I have to reconnect to my old wireless network. I have tried everything but just can't get it to work correctly! The Time Capsule light has only ever flashed orange at me...

time capsule should be in bridge mode and plugged into your main router so it is part of the existing network.
Bridge on you Lion version is easy as you can still download and install a real utility.
http://support.apple.com/kb/DL1482

How to connect my i-Pod touch to the computer

Hi, I'm trying to connect my old i-Pad (2-nd or 3-rd generation) touch to the i-Mac computer. Previously it was connected to the lap top runing Windows. The i-Pod dsplays i-Tunes and USB logo, indicating that needs to be connected to the computer. None of the computers are recognizing it. Originaly I have left the i-Pod unused for extended amount of time. The battery charge runned down and now after recharging the battery it does not connect to the i-Tunes. Please help. Thanks.

Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
What version of iTunes is installed?

How to connect computer to T410 to see the screen?

Hi,
I wonder if it would be possible to connect another computer to my Lenovo T410 via VGA cable so I would be able to change the video input and see the screen of another computer...

no you can't. The vga port can only output and does not take input for any videos.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

How to connect lap to internet by using the E52 mo...

I am using nokia E52 mobile i try to connect my laptop to internet by mobile through nokia Ovi store but it says connection fail.
Can anyone assit me to connected to internet?.....
Siva

Yoou could try PC Suite, or try completely removing all Nokia/Ovi software and drivers from your PC including drivers and running Nokia PC Cleaner and then try a fresh install. Also check your firewall is not blocking PC Suite/Ovi suite !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

How to connect Encore WT8-B-102 to the TV

Similar Messages

Maybe you are looking for