How to connect external 24'' display to a Satellite A210?

I am using an lcd tv as an external display for my satellite a210, connected with a vga cable. But I cannot just use the external monitor, I can only use both at the same time. Also, the maximum analysis I can get by using them at the same time is 1280x800, because that's the laptop's highest analysis I guess. Are there any drivers I need to download or is it something I can't resolve?

Hi
Generally speaking you can switch between the devices using the FN + F5 key combination.
It should be possible to output the video signal on both devices (notebook & external screen) and only on external screen.
I think you should change the external screen resolution to a lower level
As mentioned above, the 24 supports high pixel rate and I would reduce this to the same like supported by notebook screen.
PS: you can also update the graphic card driver if an newer is available.

Similar Messages

How to connect external database(Ex:SQL Server/Tivoli) from ABAP Webdynpro

Hi,
Any one have idea how to connect external database like SQL Server/Tivoli to access tables from WebDynPro ABAP.
Please point to me some links if you have
Thanks
Praveen

Hi,
Please check out this link -
FETCH DATA FROM ORACLE DATABASE USING Web Dynpro
Regards,
Lekha.

How to connect external trigger PCI-1433

Hi all:
I met the same problem as this old post: https://forums.ni.com/t5/Machine-Vision/How-to-connect-external-trigger-PCIe-1433/m-p/1677560/highli...
however the post did not give solution.
I am having an issue getting the external trigger( from PCI 6259) to work with a cameralink camera, a PCIe-1433 card . The PCI 6259 is connected to BNC 2111, the output trigger signal from CTR0 is connected to the SMB connector on the 1433 card and is providing pulse train at TTL voltages (0-5V). Using the MAX SOFTWARE and under the Acquisition tab I have CC1 set to external 0, however the camera is not receiving this external trigger. The camera is Basler 4096-140km.
I measured the ouiput signal from CTL0, the sigal seems good.
I tried RTSI trigger before, failded. I thought SMB should be more straight forward, seems I was wrong.
Looking forward to reply!
Attachments:
camera configuration.jpg ‏168 KB
External Camera Trigger(SMB).vi ‏57 KB

Bobjojo,
You will actually need to affect the properties of both the camera and the frame grabber to take advantage of this triggering mode. I found a document that contains a good run down of the process to acquire in this mode (linked below). As far as the programming for the acquisition is concerned, the frames will be built at the driver level for the specified frame height. This means that the IMAQ driver will composite the line scans for you, and any simple acquisition (the document shows using the Vision Acquisition Express VI) will be able to pull the image into LabVIEW.
www.ni.com/white-paper/13786/en/pdf
Karl G.
Applications Engineer
ni.com/support

HT3988 how to connect external keyboard to the garage band if its possible

how to connect external keyboard to the garage band if its possible,
is any body tried ? I have roland e66 keyboard and im trying to
connect with grage band but i dont know thats is possible??

You can definitely just connect a mouse and keyboard and then an external monitor and it will work. In the power options in the Windows control panel you will have a choice as to what happens when the lid is closed. Set it to "do nothing" and then you can shut the lid of the laptop and use only the external monitor.
If this is "the Answer" please click "Accept as Solution" to help others find it.

How to connect external display to iMac

which port do I use to connect external display to my iMac ?

Welcome to Apple Support Communities
Depending on the iMac you have, you have different ports: Mini-DVI, Mini DisplayPort or Thunderbolt. Mini DisplayPort is available in 2009 and newer iMacs, and Thunderbolt is available in the Mid 2011 and Late 2012 iMac.
You have to use one of those ports to connect an external display. You will probably have to look for an adapter, depending on the port the external screen has got

How to connect my studio display with a Apple display connector to my new mac mini

How can I connect my studio display with a Apple display connector to my new mac mini?

https://discussions.apple.com/message/8315498#8315498

How to connect a Cinema Display to alternative input?

I want to upgrade my Mac Pro (2009) to a reasonably priced graphics card but there are very few that have a Mini Displayport input.
How do I connect a Cinema display with only a Mini DP to an HDMI, Displayport or DVI input? (and still use the sound)
I've looked for Mini DP(female) adapters and can't find any.

I'm unsure of the issue, the Mini has both mDP and HDMI outputs, right? If so, the mDP for the Cinema Display an a HDMI to VGA adapter for the 2nd monitor.

How to connect external sensors to labview?

i want to ask How can i connect external sensors to NI labview for my final year project.? here are my lists of sensors:
a. Temperature sensor (LM35)
b. Humidity sensor (HH10D)
c. Light sensor (LDR)
d. Moisture sensor

simply_me wrote:
I've used the NI's bread board (with DAQ assistant initially) when I was in school. We used it for temp, light, and etc... measurements, the whole system is very straight forward. I would say having the option to simulate signals is a big plus in that. From what you described, I don't think the "slower" rate of data acquisition will disturb you at all. But more information is needed on your sensors and general functional spec.
@ NIquist & RTSLVU, please correct me if I'm misleading/wrong :-)
Is that the ELVIS stuff? Very neat but kind of pricey (unless the school is paying! )
Again, the low-cost USB DAQs from NI or MC are the way to go for the OPs project. I am assuming that he has enough electronics background to make simple signal conditioning circuits for his sensor chips.
Using LabVIEW: 7.1.1, 8.5.1 & 2013

How to connect external webservice from ABAP

Hi,
Please see code pasted below and tell me what is wrong.
We try to connect external webservice via https. Should I install certificate is SAP for this connection? (if YES, how can I do this?)
Should I configure something else in SAP to connect external webservice via https?
DATA: client type ref to if_http_client,
        lv_content type String,
        lv_xml_string type string,
        lv_length type I,
        lv_response type I,
        lv_node type ref to IF_IXML_NODE,
        lv_xml_doc type ref to cl_xml_document.
****Create the HTTP client
call method cl_http_client=>create_by_url
   EXPORTING
     url    = 'http://services-demo.krd.pl/raina/1.0/KrdAPI.asmx'
   IMPORTING
     client = client
   EXCEPTIONS
     others = 1.
CALL METHOD CL_HTTP_CLIENT=>CREATE
EXPORTING
    HOST               = 'services-demo.krd.pl'
     SERVICE = '443'
    SCHEME = '2'
   PROXY_HOST         =
   PROXY_SERVICE      =
   SCHEME             = SCHEMETYPE_HTTP
   SSL_ID             =
   SAP_USERNAME       =
   SAP_CLIENT         =
IMPORTING
    CLIENT             = client.
EXCEPTIONS
   ARGUMENT_NOT_FOUND = 1
   PLUGIN_NOT_ACTIVE = 2
   INTERNAL_ERROR     = 3
   others             = 4
CONCATENATE
'<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"'
' xmlns:xsd="http://www.w3.org/2001/XMLSchema" '
'xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:rain="http://raina.krd.pl">'
'<soapenv:Header/>'
'<soapenv:Body>'
'<rain:Login soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">'
'<id xsi:type="xsd:string">B03EB34F02</id>'
'<password xsi:type="xsd:string">Akquinet99</password>'
'<appId xsi:type="xsd:string">test</appId>'
'<appInstId xsi:type="xsd:string">test</appInstId>'
'<custom xsi:type="xsd:string">test</custom>'
'</rain:Login>'
'</soapenv:Body>'
'</soapenv:Envelope>'
INTO lv_content.
CALL METHOD client->request->set_header_field
    EXPORTING
      name = '~request_method'
      value = 'POST'.
CALL METHOD client->REQUEST->SET_HEADER_FIELD
EXPORTING
    NAME = '~request_uri'
    VALUE = '/raina/1.0/KrdAPI.asmx?'.
CALL METHOD client->request->set_header_field
    EXPORTING
      name = 'Content-Type'
      value = 'text/xml; charset=utf-8'.
call method client->request->set_header_field
    EXPORTING
      name = 'SOAPAction'
      value = 'Login'.
lv_length = STRLEN( lv_content ).
call method client->request->set_cdata
    EXPORTING
      data   = lv_content
      offset = 0
      length = lv_length.
****Make the call
client->send( ).
****Receive the Response Object
call method client->receive
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2
      http_processing_failed     = 3
      others                     = 4.
*****Get the response content
client->response->GET_STATUS( IMPORTING CODE = lv_response ).
lv_xml_string = client->response->get_cdata( ).
Regards,
Michal

HI ,
        Error in accessing External Web Service
Calling a secured external web service from ABAP
Edited by: A kumar on Aug 21, 2008 11:58 AM

How to connect external speakers to Satellite A100-451

Hello,
I have a Satellite A100-451 (UK) running Vista. I want to connect external speakers. There is a 'headphones' jack on the front (3.5mm jack I think), can I connect external speakers here? The speakers are 'PC Line' with their own power supply and also have a 3.5mm jack plug).
Thanks
KK

You need the audio Line-out put and the headphone jack provides this output.
In other words you can use this jack to connect the external speakers

How to connect extern mic in to input

How to conect extern mic (Shure sm58)and use it with prologic ?

You could use a small mixer with appropriate cabling, or an actual Audio Interface that's designed for what you want to do. The SM58 is a low impedance Mic and needs a mixer or audio interface.

HT5918 how to connect 6 DVI Displays to MacPro

Apple states can connect up to 6 DVI displays to a MacPro explanation is not clear. Mixes Mini-Display and USB terminology. What does it mean?

The article you linked to includes:
Mac Pro supports a total of two single-link DVI displays. If you connect a third DVI display using a passive adapter or a display via HDMI, it will cause one of the three displays to become inactive.
Can I connect more than 2 DVI or HDMI displays?
Mac Pro supports a total of two DVI or HDMI displays when connected via the built-in HDMI port or using the Apple Mini DisplayPort to DVI adapter. To connect additional DVI displays, use an active DVI adapter such as the Apple Mini DisplayPort to Dual-Link DVI adapter. You can connect up to six active adapter DVI displays. This requires a powered USB hub since Mac Pro offers four USB ports and you will need six to connect them all.
If your display are 1080p pr less they you can use 2 standard/passive mini displayport to DVI adapters and 4 active mini displayport to DVI adapters. If 1080p or less you do not need the dual-link adapter which are active. Yo can get less expensive active adopters.
If any of your display are greater than 1080p you need the dual-link adapter. Those included a connection to USB for power. These cost about $100 each for the Apple branded ones

How to uninstall the program "Utilities" from the Satellite A210

How can I unistall the program "Utilities" from the Satellite A210. In the control panel I can uninstall the program "Value Added Package" but not "Utilities".
With the A210 I can't work with the FN keys and on a German Toshiba help website I have found this information:
http://aps2.toshiba-tro.de/kb0/TSB0402UR0000R01DE.htm
So I will try this sequence of installation:
- Chipset Utility
- Display Driver
- Toshiba Value Added Package V1.2.40
- Flash Cards Support Utility for Satellite L500 (see this thread why I want it to do):
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46135&tstart=7
- Toshiba-Utilities V1.0.25.5C
and probably
- Hardware Setup V2.00.09
I hope the FN keys will work after this sequence of installation.
John

Hi again John
So here a little bit theory:
After clean OS you must install all necessary drivers and Toshiba tools and utilities. Just when everything is installed properly you will have well working operating system. Problem is that you cannot install all this in some alphabetical sequence but following right installation order.
I don't have Satellite A210 and cannot offer you exact installation order but it must be something like this one:
-Win7
-chipset driver
-storage manager
-display driver
-sound driver
-modem driver
-LAN/WLAN driver
-supervisor utility
-Synaptics touchpad driver
-Card reader
-Webcam driver
-patches
-configfree
-VAP
-Toshiba hardware setup
-HDMI control
-WLAN driver
-Toshiba assist
Please note
VAP is package with follow applications:
- Toshiba Components Common Driver
- Toshiba Utilities
- Toshiba PC Diagnostic Tool
- Toshiba Power Saver
- Toshiba Button Support
- Toshiba Zooming Utility
- Toshiba Flash cards
As far as I know you cannot remove one single application. What I always do is to remove whole VAP and after notebook restart I start VAP installation again but not as standard installation. I use custom installation. There you can choose which application should be installed and which not.
To be honest I have very good experience with Win7 installation and if everything is installed properly you should be able to use flash cards with FN button.

Imac 17" core duo 1.83ghz broken display how to connect external display?

Hi there! I have a 2006 Imac 17" core duo and the screen broke by accident. The repair costs are extremely high and thus I was thinking about buying an external display and hooking it up to the imac. Firstly, would such a thing be possible, and if indeed possible how would one go about setting it up?

Try F7

How to connect my Cinema Display as a second monitor

I just purchased a new 27-inch iMac, and I explained to the Apple folks that I had a 17-inch cinema display (silver clad model) that I wanted to connect, for a dual monitor set up. They told me just to get the Mini DisplayPort to DVI Adapter, but I was surprised to realize that's not going to work.
Can anyone tell me how to do this, and what connector is actually needed? I have the big old white power brick that I bought to daisy chain my old 17 and 23 inch displays with my old configuration (Mac Pro).
Or can you not have a second monitor with an iMac?
Thanks in advance.

Hi Cathy,
What connector is on that Cinema? ADC, VGA, or DVI?
Video Card:
GeForce GTX 675MX
VRAM Type:
GDDR5
Details:
This model has a NVIDIA GeForce GTX 675MX graphics processor with 1 GB of dedicated GDDR5 memory. At the time of purchase, it can be custom configured with a NVIDIA GeForce GTX 680MX with 2 GB of dedicated GDDR5 memory for an extra US$150.
Standard VRAM:
1 GB
Maximum VRAM:
1 GB*
Built-in Display:
27" 16:9 Widescreen
Native Resolution:
2560x1440
Details:
This model has a 27" LED-backlit 16:9 widescreen TFT active matrix display with IPS technology and a native resolution of 2560x1440. Apple also reports that the "cover glass is fully laminated to the LCD and an anti-reflective coating is applied." Previous Aluminum iMac models have the LCD covered by glass. The company no longer reports viewing angle or contrast ratio, however. Site sponsor Mission Repair offers free diagnosis of iMac hardware problems and a 24-hour repair service for this iMac. Display replacement, keyboard replacement, a hard drive upgrade service, and more are provided.
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2)
Details:
*This model can simultaneously support two external displays up to 2560x1600 via Thunderbolt.
http://www.everymac.com/systems/apple/imac/specs/imac-core-i7-3.4-27-inch-alumin um-late-2012-specs.html

How to connect external 24'' display to a Satellite A210?

Similar Messages

Maybe you are looking for