How to connect external device to sound card?
- Hello!
I have X-Fi gamer, but when I connect my external sound device there is no sound. Actually there is, but only when I plug it into the microfon in (white), but then the sound is very low quality.
In Vista speaker properties the Line In is unmuted and set to 00.
Any advice?
There have been a number of threads discussing using the parallel port. One of the resent ones, having to do with LabVIEW 8.2 may be found at :http://forums.ni.com/ni/board/message?board.id=170&message.id=254900&requireLogin=False
A search on "parallel" in the discussion forums will return a log of links.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion
Similar Messages
-
How to connect external trigger PCI-1433
Hi all:
I met the same problem as this old post: https://forums.ni.com/t5/Machine-Vision/How-to-connect-external-trigger-PCIe-1433/m-p/1677560/highli...
however the post did not give solution.
I am having an issue getting the external trigger( from PCI 6259) to work with a cameralink camera, a PCIe-1433 card . The PCI 6259 is connected to BNC 2111, the output trigger signal from CTR0 is connected to the SMB connector on the 1433 card and is providing pulse train at TTL voltages (0-5V). Using the MAX SOFTWARE and under the Acquisition tab I have CC1 set to external 0, however the camera is not receiving this external trigger. The camera is Basler 4096-140km.
I measured the ouiput signal from CTL0, the sigal seems good.
I tried RTSI trigger before, failded. I thought SMB should be more straight forward, seems I was wrong.
Looking forward to reply!
Attachments:
camera configuration.jpg 168 KB
External Camera Trigger(SMB).vi 57 KBBobjojo,
You will actually need to affect the properties of both the camera and the frame grabber to take advantage of this triggering mode. I found a document that contains a good run down of the process to acquire in this mode (linked below). As far as the programming for the acquisition is concerned, the frames will be built at the driver level for the specified frame height. This means that the IMAQ driver will composite the line scans for you, and any simple acquisition (the document shows using the Vision Acquisition Express VI) will be able to pull the image into LabVIEW.
www.ni.com/white-paper/13786/en/pdf
Karl G.
Applications Engineer
ni.com/support -
How to connect external database(Ex:SQL Server/Tivoli) from ABAP Webdynpro
Hi,
Any one have idea how to connect external database like SQL Server/Tivoli to access tables from WebDynPro ABAP.
Please point to me some links if you have
Thanks
PraveenHi,
Please check out this link -
FETCH DATA FROM ORACLE DATABASE USING Web Dynpro
Regards,
Lekha. -
Periodically throughout the day, CUPC will not make or receive calls, but instead presents a dialog box with the message "Phone Error. Could not place call because you have no audio device or sound card." See attachment.
Signing out of and back into CUPC resolves the issue temporarily.
I have version 8.6.2 installed and I'm using a USB headset.
Does anyone know what might be causing this?Hi Steve,
I have users reporting this as well with Jabra GN 2000 headsets. They claim using a different headset resolves it which I'm waiting to confirm but I was wondering if you were able to figure this out.
Thanks
Erik -
HT3988 how to connect external keyboard to the garage band if its possible
how to connect external keyboard to the garage band if its possible,
is any body tried ? I have roland e66 keyboard and im trying to
connect with grage band but i dont know thats is possible??You can definitely just connect a mouse and keyboard and then an external monitor and it will work. In the power options in the Windows control panel you will have a choice as to what happens when the lid is closed. Set it to "do nothing" and then you can shut the lid of the laptop and use only the external monitor.
If this is "the Answer" please click "Accept as Solution" to help others find it. -
If I plug my iPod (or a thumb drive or whatever) to my Mac's USB port, the device appears as a icon representing a connected drive on my Mac's Desktop.
This is normal, expected behavior.
HOWEVER, in some cases, I'd prefer that the device not "mount" as a connected external drive.
With thumb drives or external USB drive, of course, I want them to "mount" so I can transfer files on or off them -- that would be the only possible reason to connect an external drive like that.
But with other Apple devices like iPods or iPhones, there are TWO possible reasons to connect them to a Mac: either to "sync" them or transfer files on/off them; OR, to simply recharge the device's battery. (Or, both sync and recharging functions at once.)
For those people who use their Apple devices in ways that require transferring files (i.e. most people), then having the device "mount" as a connected device is a desirable behavior.
But in my circumstance (and I bet there are a lot of people in a similar circumstance), I have no need or desire to transfer any data to or from my device every time I plug it into my Mac: I'm plugging it in SOLELY to recharge the device's battery.
Specifically, in my case, I have a 6th-gen iPod Nano, and I use it exclusively as an FM radio and a pedometer. I don't have any mp3s or songs or any other external files loaded on it, nor do I plan to add any in the future.
The only reason I ever plug it into my Mac is so that I can recharge the iPod's battery.
But the "problem," which is a minor one I admit but a problem nonetheless, is that every time I connect the iPod to the Mac, the iPod appears as a "connected drive" icon on my Mac's desktop. Which means that I'm not supposed to just unplug the iPod when I'm done -- first, I have to find its icon on the Mac Desktop, and then drag the icon to the Trash, to "unmount" it -- and only then can I freely unplug the iPod without getting an error message telling me that I shouldn't just disconnect connected drives without first properly unmounting them.
This would be bothersome enough if I only had to do it once per connection, but in the case of the iPod Nano, there's no way to tell how recharged it is while it is in the act of recharging, so that to see if I'm "done," I have to unplug it, check the battery status, and if it's not fully charged, re-plug it back in. So that each time I recharge it, I often have to unmount the drive several times, depending on how impatient I am.
There has to be a way to prevent the mounting of the drives of devices that one is connecting simply for the purpose of recharging. But how?
Strangely, I also have an old iPhone, and when I plug that in for recharging in the same way, it DOESN'T appear as a connected drive on the Desktop. I'm not sure how I managed to do this, but long ago I must have changed some setting or preference for this to happen. And by now I've forgotten what I did.
I'd prefer that I could change the "mount/don't-mount" setting on a device-by-device basis -- i.e. make it such that this particular iPod doesn't load, but perhaps a different iPod would load -- but if that's not possible, then is there a way to stop ALL iPods and iPhones from loading as connected drives when plugged in?
(I'm not talking about appearing as connected drives within iTunes -- I'm talking about appearing as an icon on the Desktop in the Finder.)
And please don't tell me to just buy a wall charger! I prefer to recharge off my computer if possible, using the charging cord that came with the iPod.
I presume there's some simple setting to toggle this on or off, but I haven't yet found it. Any clues would be appreciated. Thanks!Well, I already know about that Finder Preferences option, but that is not what I'm looking for. Why not? Because I still need CDs and DVDs to appear on the Desktop and mount properly! If I uncheck the "CDs, DVDs and iPods" option, then I lose the ability to access CDs and DVDs, which creates a whole new problem for me. What I want is to not mount iPods only -- actually, what I really want is to not mount this particular iPod -- but if that level of specificity is not possible, then I want to exclude just iPods from mounting, without also condemning CDs and DVDs (or whatever) to invisibility.
Also, I was confused by the way the Preference is worded: It says "Show these items on the Desktop," with a series of options to check. But this phraseology seems to mean that the unchecked items will still "mount," they simply won't appear as Desktop icons. One would still have to "Eject" them using a menu command, rather than dragging the icon to the Trash -- right? Or am I mistaken, and is the Preference Pane simply badly worded, and when they say "Show these items on the Desktop," what they really mean is "mount these external devices as connected drives." So that if a category is unchecked, then they won't load as external drives at all?
But if so, then what purpose could possibly be served by inserting a CD or DVD that is not recognized by the computer? And if it isn't recognized, then it would seem that there would be no way to ever Eject the CD or DVD disk. Right?
Thus, if I uncheck that Finder Preference box you suggest, one of two outcomes will result:
-- Either CD, DVDs and iPods are still mounted, they just won't appear as icons on the Desktop; but they would still need to be Ejected via a menu command, which doesn't solve my problem.
-- Or, CDs, DVDs and iPods are not mounted or recognized by the computer at all, which means that if I insert a disk into the disk drive, it will get stuck there forever, since there's no way to Eject it, since the OS doesn't recognize that it's even there. Which is thereby a new problem.
Either way, I'd have a problem! Or...? Clarification, anyone? -
How do you set a usb sound card as the default sound device for all programs?
I'm running cmus for a music player and it works fine with the internal speakers on my macbook pro. I'm using a usb sound card for a set of 5.1 surround speakers and cmus won't send it's audio to the usb sound card. I've also tried several other programs for audio and it seems to be hit or miss with being able to use the usb sound card. I'm not sure if I'm overlooking the a setting or if there is a different audio output plugin for cmus that has the functionality I need. Cmus also won't play over any bluetooth audio device while some other sounds will.
Yes I did and it does not appear there. Only the ringtones I have created myself and the default ones appear in the list.
In settings>sounds>ringtone however they all appear -
Can I connect a USB 2 sound card to a Macbook equipped only with USB 3 ports?
Hello,
I just learned I might have to purchase a new Macbook because my USB ports are fried and I was looking at purchasing a refurbished Macbook pro from 2012:
http://store.apple.com/ca/product/FD101LL/A/refurbished-133-inch-macBook-pro-25g hz-dual-core-intel-i5
the only trouble is I make music with a MOTU Audio Express sound card, and it only has a USB 2 port and a bus-powered Firewire (which I don't like using since it hasn't been too reliable in the past).
http://www.motu.com/products/motuaudio/audio-express/summary.html
Unfortunately, it seems that the Macbook I'm looking into purchasing only has USB 3 ports, and I looked for info on USB 3->USB 2 adapters online and this simply doesn't seem to exist. The only info I managed to find on this subject was this little bit on the Apple website:
Can a USB 2 cable be used to connect a USB 3 device to my computer?
If the device end of the cable fits into the connector on the device, yes. However, because it has fewer wires, you won't get USB 3 speed and power may be limited to 500 mA.
does this mean that I can connect a USB 2 cable from the USB 2 port of the MOTU sound card to the USB 3 port on the Macbook? I'm OK with the power and the speed being limited to USB 2 power, I just want to make sure I can actually use my sound card with this new Macbook.
Thanks!I think I'm understanding this a bit more now.
Here is the cable that I use:
http://www.amazon.ca/USB-Cable-Type-Male-Black/dp/B00183I7EE
The Type A part is the one that I'm currently putting into the Macbook and the Type B part goes in the sound card.
Would this work with a USB 3.0 port on the Macbook?
Thanks for your time and patience... -
How do I disable the onboard Sound card in BIOS on the Equium A200
I am using a Creative Sound Blaster external soundcard but the recording level is very low and have been advised by Creative to disable the onboard sound card in BIOS but there is no option to do this. Can anyone help ?
Hi
You cannot disable it in the BIOS.
If you want to disable the sound card you can do this in the device manager!
cheers -
How to add audio devices under sound in system preferences
How do I add output audio devices under system preferences --only option listed is internal speakers?
Macbook help says to change device under sound in system preferences. However, only option listed it the internal
speaker.
I need to sound to come from my tv which is hooked via vga cable and audio cable.
Every thing works but I cannot get sound from tv.You are my hero. I'm not very savy when it comes to connections. I had the audio cable hooked up to the audio port which is next to the headphone port on my macbook. After switching the tv was listed just as you said it would. Thanks so much. I'm now a very happy camper.
-
Suddenly the USB ports in my Macbook Air are not detecting the connected external devices
So far I have connecting external hard disk to my Macbook Air and they were working finr. Suddenly none of these are bing detected. Kindly support
You may want to reset the SMC and see if this resolves your issues.
Read this article on how to do this. http://support.apple.com/kb/ht3964 -
How do I disable the onboard sound card in BIOS on the Equium A200 PSAE2 ?
I am using a Creative Sound Blaster external soundcard but the recording level is very low and have been advised by Creative to disable the onboard sound card in BIOS but there is no option to do this. Can anyone help ?
Do not post twice!
Follow this
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99828& -
How to connect external sensors to labview?
i want to ask How can i connect external sensors to NI labview for my final year project.? here are my lists of sensors:
a. Temperature sensor (LM35)
b. Humidity sensor (HH10D)
c. Light sensor (LDR)
d. Moisture sensorsimply_me wrote:
I've used the NI's bread board (with DAQ assistant initially) when I was in school. We used it for temp, light, and etc... measurements, the whole system is very straight forward. I would say having the option to simulate signals is a big plus in that. From what you described, I don't think the "slower" rate of data acquisition will disturb you at all. But more information is needed on your sensors and general functional spec.
@ NIquist & RTSLVU, please correct me if I'm misleading/wrong :-)
Is that the ELVIS stuff? Very neat but kind of pricey (unless the school is paying! )
Again, the low-cost USB DAQs from NI or MC are the way to go for the OPs project. I am assuming that he has enough electronics background to make simple signal conditioning circuits for his sensor chips.
Using LabVIEW: 7.1.1, 8.5.1 & 2013 -
How to connect external webservice from ABAP
Hi,
Please see code pasted below and tell me what is wrong.
We try to connect external webservice via https. Should I install certificate is SAP for this connection? (if YES, how can I do this?)
Should I configure something else in SAP to connect external webservice via https?
DATA: client type ref to if_http_client,
lv_content type String,
lv_xml_string type string,
lv_length type I,
lv_response type I,
lv_node type ref to IF_IXML_NODE,
lv_xml_doc type ref to cl_xml_document.
****Create the HTTP client
call method cl_http_client=>create_by_url
EXPORTING
url = 'http://services-demo.krd.pl/raina/1.0/KrdAPI.asmx'
IMPORTING
client = client
EXCEPTIONS
others = 1.
CALL METHOD CL_HTTP_CLIENT=>CREATE
EXPORTING
HOST = 'services-demo.krd.pl'
SERVICE = '443'
SCHEME = '2'
PROXY_HOST =
PROXY_SERVICE =
SCHEME = SCHEMETYPE_HTTP
SSL_ID =
SAP_USERNAME =
SAP_CLIENT =
IMPORTING
CLIENT = client.
EXCEPTIONS
ARGUMENT_NOT_FOUND = 1
PLUGIN_NOT_ACTIVE = 2
INTERNAL_ERROR = 3
others = 4
CONCATENATE
'<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"'
' xmlns:xsd="http://www.w3.org/2001/XMLSchema" '
'xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:rain="http://raina.krd.pl">'
'<soapenv:Header/>'
'<soapenv:Body>'
'<rain:Login soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">'
'<id xsi:type="xsd:string">B03EB34F02</id>'
'<password xsi:type="xsd:string">Akquinet99</password>'
'<appId xsi:type="xsd:string">test</appId>'
'<appInstId xsi:type="xsd:string">test</appInstId>'
'<custom xsi:type="xsd:string">test</custom>'
'</rain:Login>'
'</soapenv:Body>'
'</soapenv:Envelope>'
INTO lv_content.
CALL METHOD client->request->set_header_field
EXPORTING
name = '~request_method'
value = 'POST'.
CALL METHOD client->REQUEST->SET_HEADER_FIELD
EXPORTING
NAME = '~request_uri'
VALUE = '/raina/1.0/KrdAPI.asmx?'.
CALL METHOD client->request->set_header_field
EXPORTING
name = 'Content-Type'
value = 'text/xml; charset=utf-8'.
call method client->request->set_header_field
EXPORTING
name = 'SOAPAction'
value = 'Login'.
lv_length = STRLEN( lv_content ).
call method client->request->set_cdata
EXPORTING
data = lv_content
offset = 0
length = lv_length.
****Make the call
client->send( ).
****Receive the Response Object
call method client->receive
EXCEPTIONS
http_communication_failure = 1
http_invalid_state = 2
http_processing_failed = 3
others = 4.
*****Get the response content
client->response->GET_STATUS( IMPORTING CODE = lv_response ).
lv_xml_string = client->response->get_cdata( ).
Regards,
MichalHI ,
Error in accessing External Web Service
Calling a secured external web service from ABAP
Edited by: A kumar on Aug 21, 2008 11:58 AM -
HOW TO RECOVER DELETED DRIVER FOR SOUND CARD & PCMCI ADAPTER
Hi
How to recover a mistakenly deleted drivers for Sound card, PCMPCI and Other controller on IBM thinkpad ;Type: 1709-AB1? please help
ThanksHere.
I don't work for Lenovo. I'm a crazy volunteer!
Maybe you are looking for
-
Pls see the title. There are hundreds of elements/paragraphs.
-
Class.forName() throws null exception in servlet
Hi, just wondering if anyone having this similar problem: when i try to load a class using Class.forName() method inside a servlet, it throws null exception. 1) The exception thrown is neither ClassNotFoundException nor any other Error, it's "null" e
-
my phone doesn't work in pc suite mode and the phone software update doesn't detect that there is any update available although i'm running V 12.0.24 ! tried different cables , different PCs , different versions of windows ! any help ?
-
Scstat freeze when it try to print the ipmp configuration
Hi All, some of my cluster have a strange behavior sometimes. the scstat freeze at the point of showing the ipmp configuration, and when i want to create a ressource LogicalHostname (VIP), the command freeze, and i see anything into the log file....
-
Problems with iPhoto thumbnail cache?
I am running iPhoto 7.1.1 under MacOS 10.4.11 and have started experiencing the following problem: I can't seem to view the thumbnails of the Photos in my iPhoto library. I am only able to view full-size images. I can view thumbnails of Events, but n