How to connect extreme to an office network
Hi Folks,
Do you any of you know if it is possible to connect the Airport Extreme to an office network?
If so, how would this be done?
Not sure what you mean by office network. Is this a network that someone else has set up and administers?
If yes, you would need to check with the network administrator to see whether or not a router like the AirPort Extreme would be allowed to connect to the network.
If yes, the AirPort Extreme would need to connect using an Ethernet cable from the WAN "O" port on the AirPort Extreme to an available Ethernet port on the network.
You don't mention what service you want the AirPort Extreme to provide. What might that be?
Similar Messages
-
How to Connect My Printer to The Network
My printer is LaserJet M1212nf. According to the brief introduction I should connect the printer to the network first in order to enable its e-printing function. I'm working at home. I don't share information with other computers. Does "network" mean my home internet? Do I need to use either a cable or a USB to connect it to the home internet? Or is there another way? Once it is connected, how can I get an email address from HP for my printer?
Hi,
Your printer can be connected to your network to print but it's not an ePrint printer:
http://www.shopping.hp.com/shopping/pdf/ce841a.pdf
It has a LAN card, you can connect it to your network and print wirelessly (note: print wirelessly and ePrint are two different things).
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02272928
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
How to connect to excel document at network machine through oracle ?
Hello !
I am able to read excel doc at my local drive through sqlplus(oracle).
Please help me to modify steps to access excel docs at network machine.
steps:->
1) start\settings\control\panel\administartive tolls\data source odbc\system dns\driver for microsoft excel (*.xls)\dns source at my local drive.
2)C:\oracle10g\product\10.2.0\db_1\hs\admin\initNITIN.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = TESTDS
HS_FDS_TRACE_LEVEL = 0
#HS_FDS_TRACE_FILE_NAME = aetna_xls.trc
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
3) adding one more listener in listner.ora
SID_LIST_HSODBC_LISTENER =
(SID_LIST=
(SID_DESC=
(SID_NAME=NITIN)
(ORACLE_HOME=C:\oracle10g\product\10.2.0\db_1)
(PROGRAM=hsodbc)
HSODBC_LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1555))
4) entry in tnsnames.ora
ABC.SCF.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1555))
(CONNECT_DATA =
(SID=NITIN)
(HS=OK)
5)lsnrctl stop listner
6) listner start HSODBC_LISTENER
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle10g\product\10.2.0\db_1\network\admin\listener
.ora
Log messages written to C:\oracle10g\product\10.2.0\db_1\network\log\hsodbc_list
ener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1555)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1555)))
STATUS of the LISTENER
Alias HSODBC_LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 30-JUN-2007 12:30:25
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle10g\product\10.2.0\db_1\network\admin\listene
r.ora
Listener Log File C:\oracle10g\product\10.2.0\db_1\network\log\hsodbc_li
stener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1555)))
Services Summary...
Service "NITIN" has 1 instance(s).
Instance "NITIN", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
7)create database link test
connect to "ben"
identified by joe
using 'ABC.SCF.COM';
8)SQL> select * from all_objects@testin;
OWNER OBJECT_NAME S OBJECT_ID
DATA_OBJECT_ID OBJECT_TYPE CREATED LAST_DDL_ T S T G S
Sheet1$ 0
0 TABLE 30-JUN-07 30-JUN-07
Sheet2$ 0
0 TABLE 30-JUN-07 30-JUN-07
Sheet3$ 0
0 TABLE 30-JUN-07 30-JUN-07
My queries are :
1)Is it possible to connect to a document at network
if yes then for , do i need to map a drive.
please explaqin how what changes required to make it possible to read a network excel documnet through oracle.
Thanks in Advance
--AjayHi Justin ,
Thanks for your prompt reply ...
I have mapped network machine folder to X:\
now I can access this on my local machine by x:\
And dsn it pointing to document on x:\
then i tried to connect , but got an error.
SQL> select * from all_objects@testin;
select * from all_objects@testin
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC Excel Driver] '(unknown)' is
not a valid path. Make sure that the path name is spelled correctly and that
you are connected to the server on which the file resides. (SQL State: S1009;
SQL Code: -1023)
ORA-02063: preceding 2 lines from TESTIN
Do I need need any other changes in above confiiguration..
or create link statement need to be modified...
SQL> create database link testin
2 connect to "SCF\ben"
3 identified by "joe"
4 using 'ABC.SCF.COM';
please suggest -
Advice on how i can set up an office network with 40 computers.
I am planning on setting up an office network with 40 computers. What do you think is the best way i can do this? Thank you in advance.
Your first step should be to call an IT professional who has experience with this type of thing. He will need to survey the entire area and ask you dozens of questions about how you want things to operate. Then, he will present you with a proposal for the network listing all of the things that the system can and and cannot do.
Your second step would be to call another IT professional who has experience with this type of thing and go through the same procedure.
Your third step would be the same as the first and second.
Your fourth step would be to check the references provided in the steps 1-3 and then decide on which professional that you want to use. -
How to connect Photosmart C4795 to Wireless Network - Mac OSX 10.8.4
I am desperately confused here! When I bought the printer 2-ish years ago I was able to set it up and have it connected to my network no problem. Since then I have moved and updated my OS to Mountain Lion and lost my installation CD. As of now, this is where things stand.
When I turned the printer on and connected it to my iMac via the USB cable, the computer found it and installed it with no issues. I can print with no issues when the USB cable is plugged in.
Using the printers built in display, I have run the HP Network Configuration and the Wireless Network Test. The printer can see my network, but it won't connect to it. I have no bloody idea where I need to go to enter my network password so the printer can get online.
I've manually downloaded the HP Driver found at http://support.apple.com/kb/DL907 and that put the HP Utility on my computer (which was already there) but I don't see any place in the utility software that would let me enter my network password or even configure network settings for the printer.
My router is an Apple Airport Extreme, and the firmware is up to date. Everything on my computer seems to be up to date. I just cannot for the life of me figure out how to get this thing online. Any help would be greatly appreciated =)Yup, there is no way to install your printer using OS X 10.8, sorry.
However, there are alternatives. Here is the easiest way:
1. On the front of the printer: Setup [Scan] > Wireless > Restore Defaults.
2. In the same Wireless menu, start WPS Pushbutton.
3. On your Mac go to Applications > Utilities > Airport Utility. Choose your Airport and click Edit.
4. In the menu bar at the top of your screen go to Base Station > Add WPS Printer.
5. Choose the FIrst Attempt mode, then Continue.
Now your printer should be connected to your wireless network. Next, go to System Prefs > Print & Scan, click the '+' sign to add your printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
How to connect branch to head office domain through MPLS
I have head office company, we have connected 7 branchs to head by MPLS.
now i have server and domain haibah.local fo my LAN. how i will let pc's in branches connect to my domain and sharing folders between us. please give me details.no internet in branches. here i have
two NIC, first NIC ip 192.168.0.2 for local network, second NIC dynamic from broadband router for internet.
server 192.168.0.2
gateway 192.168.0.254
the first branch 192.168.2.11
gateway 192.168.2.1bit confused by your post here.
are you saying all your offices are connected by MPLS network? If so then you should have a routed network or sorts so you all your offices should connect fine and be able to locate the server, so long as you have correct DNS and Gateway settings on your
computers.
your clients should connect up by the MPLS not the internet.
if you are looking at routing your internet traffic via this one server you would be best of using some form of forward proxy server / device - such as TMG - although this is approaching EOL.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn: -
How to Connect SbRIO to Host using NEtwork Stream
Hi,
I am using a program to transfer data from the PC to the Starter Kit using NEtwork Streams.Can anybody tell me how the IP of the PC / SbRIo should be configured in order to connect successfully.Hey,
The first thing to do is make sure that the sbRIO can been seen in MAX under Remote Systems. There is lots of info on the web for connecting cRIO which will be the same for a sbRIO. Try these:
Install NI LabVIEW, LabVIEW Real-Time and FPGA Modules, and NI-RIO Driver
Assemble Your NI CompactRIO System
Configure Your NI CompactRIO System for First Use
Configure NI CompactRIO for DHCP
Configure NI CompactRIO With a Static IP Address
Install Software on Your NI CompactRIO Controller
Introduction to NI LabVIEW
Lewis Gear CLD
Check out my LabVIEW UAV -
How to connect Apple TV to wireless network needing two passwords?
The device will connect initially just fine, and I type in the first password and it connects. The issue with the network is that after typing in the initial password you need to open a web browser to type in a second password, kind of like some hotels require you to do. I read somewhere that you can call the internet provider and have them add your MAC/wifi address for your Apple TV straight into the network for connection, so my apartment manager called the internet provider to do so, but claims they won't do such a thing.
Anyone have a different solution? Connection through a computer or external device? I don't have a clue what else could be possible since my computer/phone can see my Apple TV but the Apple TV can't see other devices because it's not actually connected to the internet. I'm out of options!
Help is much appreciated, thank you!!!https://www.google.dk/search?client=opera&q=internet+sharing+in+osx&sourceid=ope ra&ie=UTF-8&oe=UTF-8
it take a bit of skills and knowledge to setup
so read up on it and give it a go
or give up
or ask somebody you know who got some skills to show you -
How to connect my macbook with local network
hi,
i would like to connect my macbook with the localnetwork. please guide me how to do itIf you are attempting to share your iPad mini's cellular data connection with the MacBook, please check out the following Apple Support article for additional details on how to do so.
-
How to connect direct tv to my network
Just got Direct TV whole home DVR and cannot connect wirelessly to my network. Says my password is incorrect. What do I need to do?
Sorry, but that is the version of firmware that you are using, not the version of AirPort Utility.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Utility menu just to the right of the Apple icon
Click About AirPort Utility
The version will either be 5.x.x or 6.0 -
How to connect pcs to secured apple network?
My girlfriend has two pcs, one for work and one for personal use. She is able to connect to my apple network if it is the automatic, unsecured setting but if I setup a secured network it seems to be nearly impossible her to connect. We have tried the WEP 13 character password, which we understand is almost useless. We have tried the WPA2 13 character password also. Does anyone have any knowledge of this problem? It does not seem to be a very common issue because I am not able to find any answers which make it work yet.
No guarantees, but this worked perfectly on my sister's XP machine.
On your Mac......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Select your Apple router and click Manual Setup
Click the Wireless tab below the row of icons
Change the setting for Wireless Security to WPA/WPA2 Personal
Use an 8 character password consisting only of of numbers and lower case letters with no spaces
Click Update to save settings
Restart the PC and try to log on.
If still no luck, the Windows FireWall settings likely need to be checked by a PC guy who understands them. The anti-virus program may also be blocking the connection. -
How to connect to a EAP-MSCHAP network?
I'm having trouble connecting to my schools network under Arch Linux using netcfg. Wired internet works well, but I'm unable to connect by wireless as I would under Windows or Ubuntu (using network-manager, which supports MS-CHAP). The easy solution would be to simply install network-manager, but I would rather use CLI programs.
The relevant information;
Network Authentication; Open
Data Encryption; WEP
automatically provided key
EAP type; PEAP
authentication; Secured Password (EAP-MSCHAP v2)
no server certificate validation.Wintervenom wrote:
network={
ssid="Name of the Access Point"
key_mgmt=WPA-EAP
eap=PEAP
identity="Authentication Username"
password="Authentication Password"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
priority=1
CONNECTION="wireless"
DESCRIPTION="Manual Wi-Fi connection."
INTERFACE="wlan0"
SECURITY="wpa-config"
WPA_CONF="/etc/wpa_supplicant.conf"
IP="dhcp"
TIMEOUT=45
The second excerpt looks like a netcfg related config file, but I'm not sure what to do with the first one. -
Urgent How to connect sql plus from spx network
My lsnrctrl is giving error show below
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 2.3.2.1.0 - Production
System parameter file is D:\ORAWIN95\network\admin\listener.ora
Log messages written to D:\ORAWIN95\network\log\listener.log
Trace information written to D:\ORAWIN95
\network\trace\listener.trc
Attempted to listen on: (DESCRIPTION=(CONNECT_TIMEOUT=10)
(ADDRESS=(PROTOCOL=SPX)
(Service=dev3_lsnr)))
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 55: Unknown system error
no listener error
TNS-12560: TNS:protocol adapter error
no listener error
I am using windows 95 and have a personal oracle 7.3.And want to
connect on spx network
nullLogin as sysdba when you are using SYS user
i.e in username=sys as sysdba
password=<your password>
And Refer this doc for better understanding
http://docs.oracle.com/cd/B19306_01/server.102/b14357/ch3.htm -
How to connect remotely to the office
I work in an office that has 2 iMacs & a MacBook. The Macbook gets taken home on occasion to work at home. How do I set up one of the iMacs to be accessed remotely. I know it has to do with the Remote Sharing Preferences, but that's about it. And does it matter if the iMac were accessed via the MacBook or a Windows Desktop.
I got this DNS Provider list from a 2006 article in MacWorld. Any of these jump out as cheap & Easy. They were using DynDNS as an example in the article.
-
How to connect a PS3 to BT Openzone or Bt FON
I thought I would post this information as it has taken me all morning, a lot of phone calls and reading on google to sort this out!!
Problem I had: I want to take my PS3 to my parents house when visiting and they dont have any access to the internet. I am a total broadband customer and have access to BT FON & Openzone.
I called BT directly and they said they didnt support it so I nearly gave up however I have now found out exactly how to connect!!
Go to Network settings on PS3
Go to - Internet connection settings
Choose - Custom
Choose - Wireless
Choose - Scan
Pick whichever has highest signal strength - either BT FON or BT Openzone
SSID should come up with BtOpenzone (leave it as it is!)
WLAN settings - choose none
IP address - auto
DHCP host - do not set
DNS - Automatic
MTU - automatic
Proxy server - do not use
UPNP - enable
Press x to save settings
At this point it will test connection and show the IP address has been found but the internet connection failed, this is fine. Come out of settings and go to your internet browser on PS3
Once you launch the browser you get the BT openzone log in page, enter your details if you are a customer or buy the package / whichever is your preference.
Once you have logged in you can then close the browser and launch an online game!
I played Black Ops on BT Openzone at signal strength 100%, it was perfect and I had no problems at all!
I hope this helps!!!Hi, BTOPENZONE is my normal wireless network. I only have openzone and pay monthly for it!
Has anyone found a solution to the problem mentioned above with regards to the PS3 not obtaining an IP adrress from the OPENZONE access point? I alled th openzone helpline last night and am no further on today!
Please can someone help me!!
Maybe you are looking for
-
How to fetch WSDL targetNamespace in bpel ?
Hi Experts, I 've a requirment to fetch data of targetNamespace , service/@name and port/@binding in wsdl. Is there any way to achieve this ? For ex : below is my sample wsdl <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:
-
Hi,I have a VBA program developed in Excel 2000 and it works without any programs. But error 1042006(Network error) returned by EssVGetMemberInfo() when running in Excel 2003. The function is using in a loop and it works fine for the first 4000 membe
-
How to merge/compare two workflows.
Hi there! Is there a way to merge or compare two Oracle Workflows - to find potential differences? If you use a regular text compare, it's pretty hard to get an overview over what's been done.. Kind Regards, Henrik
-
IMovie 08 slideshow infinite loop - with Applescript and Automator?
As many people I try to use iMovie for a slide show with an infinite loop. But there is no button inside the program for it. I don't want to export the project to use the loop function of Quicktime. Because that means compression of the slide show ph
-
My T61 failed catastrpphically and I had to get a replacement and I picked a T500 2055-A77 it works great with the hard drive from T61 uninstall T61 drivers and install T500 drivers and your good to go but the hard drive included with the T500 was a