How to connect firmly a 50M-68F convertor to my DAQ card?

Hello,
I am using a 50M-68F (183139B-01) connector to connect my 5B equipment to a MIO-16E4/PCI6023E. This connector is simply plugged into the board (no screw or whatsoever) and I was wondering if there was a better way to tighten this connection together?
Thanks,
Christophe

The only thing you may need to buy, if you do not already have one, is a wireless router.
Pinkster

Similar Messages

How SCXI modules are multiplexed into one Channel of the DAQ card?

Hi all,
I am Sirisha from Hyderabad.
I am a new to NI hardware.
take the below mentioned senario.
Suppose i am using SCXI-1000 chassis with SCXI-1520 and 3 SCXI-1102 modules and PCI-6070E DAQ card.
now i know that if i connect the DAQ card to the SCXI chassis through sh-6868 cable and 1349 adapter, all channels of SCXI modules are multiplxed into the 0th channel of DAQ card.
Here i want the detailed explanation of theory of multiplexion on how all the scxi channels go to 0th channel of DAQ card
Thanks in advance
regards
Preetam

Sirisha,
Thank you for contacting National Instruments.
Here is a KnowledgeBase article entitled "How Are SCXI Channels Multiplexed While Having Other Inputs On The DAQ Card?"
There is a little more specific information about multiplexed mode here.
Michael P
National Instruments

How do i generate the TTL pulse from PCI 6024E DAQ card

Hi, I'm trying to write a program which generates a single TTL pulse when it is run. My goal is to generate the pulse, send it to the output channel of my PCI 6024E DAQ card, and then use a BNC cable, to display the signal on the oscilloscope. I have written the code and I think it appears fine but when I try to view the signal on the scope I am unable to see the pulse. I have tried slowing down the sweep on the scope and have adjusted the voltage and time scales but have not seen any response. After examing my DAQ card, I noticed that none of the PFI/TRIG terminals on the card are wired; the output channel connects to terminals for DAC0OUT and Ground. I'm wondering if this pin needs to be wired in orde
r to generate the pulse since PFI0/TRIG1 is the start trigger terminal. Any help would be appreciated. Thanks.
Attachments:
ttl.vi ‏26 KB

Hi,
You are looking for a retriggerable pulse generation. Please check the Generate Retriggerable Pulse (DAQ-STC).vi example that ships with LabVIEW.
Regards,
RamziH.

How to synchronize the data acquisition from both GPIB and DAQ card

I want to begin/stop acquiring the data from GPIB and PCI6024E card into Labview at the same time. Since the acquisition from GPIB is quite slow comparing to the one from DAQ card, I can not put both of them in the same loop structure. Is it possible to synchronize them?
Thank you!

Hi,
I wanted to save data acquired from NI-DAQ (for example, NI 9234) in a file using the DAQ-mx ANSI C Code. The response I got was as follows:-
One way to do it is with TDMS logging. DAQmx comes with functions designed to log to a TDMS file. This is a special file type that is used for collecting data in a logical format. It can be displayed in a TDMS viewer where data is separated into groups and channels. NI-DAQmx provides examples for how to log to TDMS. Look at the TDMS examples in the C:\Users\Public\Documents\National Instruments\NI-DAQ\Examples\DAQmx ANSI C\Analog In\Measure Voltage directory.
However, now I want to know is there a way that using that same C code, can we save the data in a .txt file format (Text File) instead of a TDMS file? We actually want to access that file through MATLAB (that's why we want to save it in text format).
Also on an other note, is there a way we can access & open TDMS files by MATLAB?
Thanks,
Sauvik Das Gupta

How can I control a stepper motor drive using a DAQ card?

I need to control a simple CW/CCW stepper motor drive using a DAQ
card. I simply need to output a 5 volt signal and then a drop in
the signal, and so on 200 times or steps for 1 revolution. I have
desiigned the basic program, but do not know how to output the
appropriate signal.
Cheers,
Matt

What DAQ card do you have? Ideally, one with a counter output to generate the steps, where you can control frequency. If you try to start the motor too fast (acceleration or abrupt application of fast pulses) it may stall out. Search in Help/Search for Examples for 'frequency' and 'pulse' for example of frequency generation. You can also use a digital output on the DAQ card to control direction.
If DAQ card does not have a counter, you coul do a software timed loop to toggle a digital output to generate the pulse train. It may not be fast enough nor accurate for your application, do not know from info you have given
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

How to connect my apple account to iTunes without having credit card

how can i connect my apple account to ituens without using the credit card? I want to download free apps to my computer but i can't. because i don't have a account for app store. please help me out!

Follow the instructions here > Create an iTunes App Store account without a credit card

How to generate a signal like this on PCI-6202 DAQ card

I want to generate a signal like the one in the attached picture.
Which have inputs like
1. Frequency
2.Duty cycle
3. No of pulses
I have created a file which gives the signal like the other one in the end which has frequency of 200us and duty cycle of 0.5% that is 1us On and 199us signal off. Now i need to include some sort of condition that when the button is pressed then the signal of the require frequency, duty cycle and no of pulses is created as input by the user on the front panel, like the one which are first part of the signals in the picture below.
Attachments:
singal_co2_laser.png ‏12 KB
gen_digital_freq_duty_noofpuleses.vi ‏21 KB

I can direct you to this forum post as an example and see if it helps you out. It seems very similar
http://forums.ni.com/t5/Multifunction-DAQ/how-to-generate-digital-signal-from-PCI-6221-like-the-one-...
Rob W.

How to acquire data from 2 chs of the same DAQ card at different sampling rate

I am using single DAQ card (either 6013 or 6014) in my system i want to acquire data from 2 (or more) channels with following requirements
1. sampling rate of each channel should be independant of each other (say one is 20 Hz and other is 15 kHz)
2. data from all the channels should be acquired simultaneously.
3. coding must be done using DAQmx VIs
I have tried out following things
1. I created separate task for each channel: i found out that two tasks can not run simultaneously even though the channels are different
2. I tried out single task with two channels included in it. and i used 'channels to Read' property to determine from which ch. i want to acquire data: this method works fine if the sampling rates are same. but if i change the sampling rate of one channel it gets reflected in other channels as well.
can somebody help me out to solve this problem.
i will appreciate if somebody can post the sample code as my deadline is approaching
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blog

Hi Dennis Knutson
Thanks for your suggestion.
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blog

How to connect my friends apple notebook through video call

HOW TO CONNECT TO A FRIEND WHO IS USING APPLE NOTEBOOK FROM MY IMAC SUGGEST ME WAITING FOR A SOLUTION FROM APPLE TEAM SUPPORT

Hi,
Typing in all upper case is regarded and shouting here.
Presumably as you have posted in the OS X 10.7.x (Lion) area you are running this version of the OS on your iMac.
This will have iChat 6 on it.
This can use AIM, Jabber and Yahoo IDs within the app.
Apple IDS ending in @mac.com and iCloud issued @me.com and @icloud.com are also Valid AIM Screen Names.
If you use Googlemail and Enable "talk" in the products there you can then use your Google Mail ID as a Jabber ID (although it has it's own Add Account option in iChat)
Facebook has an option to Enable "Chat" which will give you a Chat ID variant on your name there and this can be used in iChat (or Messages) as a Jabber ID.
The Yahoo Account will only do Text chats.
It also has to be an actual ID registered at Yahoo.
Chats are then AIM to AIM or Jabber to Jabber or Yahoo to Yahoo.
So your Buddy will also need a suitable ID or Screen Name for the relevant service.
8:16 pm Sunday; January 19, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
Check your MacBook Pro model year against the list in this Apple tech note:
About Mini DisplayPort to HDMI adapters
Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

I need to know how to connect my macbook to the tv

I ordered the mini dvi adapter for my macbook 13in and obviously it connects to the computer but i have no idea how it connects to the tv. Where does it go? and do i need something else to help connect it to the tv? I am really confused please help.

Yep, Apple makes adaptors to go from the mini DVI on the macbook to almost any type of input that you TV will have. First check the back of your tube to find out what kind of input it has, and order the appropriate adaptor.
Luck
E

How to connect a Sony Bravia TV to the internet through your Airport network

Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

I have now had a detailed reply from Sony Europe and the way to do this is to:
1.       Press Home on the TV Setup
2.       Use the right and left arrow to select Setting.
3.       Use the up and down to select Network, press Enter.
4.       Select Network Setup.
5.       Select Wireless setup.
6.       Select Scan
7.       Select your network
8.       A new screen will appear asking for entering the security key.
9.       Enter your WPA2 key.
10.   Select Enter.
11.   It will take you back to the same screen asking for entering the
security key.
12.   Press the right arrow.
13.   Select Auto.
14.   Press the right arrow.
15.   Select Save and connect.
These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

How to connect my Mac book Pro to a TV

How to connect my MacBook Pro to the TV using HDTV cable

I am assuming your TV has HDMI connector.
In that case, if your MacBook is the retina-one, you have HDMI connector there too. All you need is HDMI cable to connect teh two.
If your MacBook has thunderbolt port instead, you need Mini DisplayPort to HDMI adapter and HDMI cable.
Hope this makes sense.

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

How to connect my iPhone and iPad to Apple TV

How to connect my iPhone and iPad to Apple TV

Connect the iPad and Apple TV to the same WiFi network. Double Tab the home button on the iPad and then swipe your recently used apps from left to right until you see the mirroring icon which looks like a retangle with an up arrow. Tab that icon until you see the Apple TV. Tab Apple TV and slide the slider to the ON position. You should now see your iPad screen on the TV the Apple TV is connected to.

How to connect firmly a 50M-68F convertor to my DAQ card?

Similar Messages

Maybe you are looking for