How to connect from  bw system  ecc system.

how to connect from  bw system  ecc system.

Solution
Maintain the entry using the following path:
Call Administrator workbench (transaction RSA1).
From the 'Settings' menu, select Global Settings'.
If an entry already exists in the field "BW user for ALE", delete this.
Enter the correct names for the BW users in this field.
Save the entry.
You must restart the Administrator Workbench (RSA1) now.
The source system can now be linked without errors.
hope this helps.

Similar Messages

  • HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA APPLICATION

    HI expects,
            HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA or . DET APPLICATION.please provide me some scenarios and documents.please help me.

    Hi,
    In the sender side i.e. in SAP system you can use IDoc/RFC/Proxy to push the data to XI.
    IDoc supports only Async communication and in Sync case performace is good using Proxy.
    In the receiver side you can use Java Proxy to connect to the Java application or you can even bulid a webservice over the Java/.Net application and use SOAP adapter to post data to it.
    Thanks
    SaNv...

  • Connection from SAP to our systems involving 2 saprouters

    connection from SAP to our systems involving 2 saprouters
    we have 1 saprouter inside a dmz and another for connecting to our systems.
    we are guessing that this is possible
    SAP (sapserv2) -
    SNC----> saprouter1 (DMZ, SNC connection) -
    > saprouter2 (P * * 3200) ---> SAP1, SAP2...
    But how could we do that?
    How can we let SAP know that they need to connect to 2 saprouters instead of 1?
    The "Mantain System Data" in sap service marketplace only lets us introduce 1 saprouter.
    And how should be the saproutettab of the 2 saprouters?
    saprouter1:
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 000.00.00.00 *
    P * saprouter2 3299
    saprouter2:
    P * * 3200
    P * * 3600
    is that possible?
    Many thanks !!

    Hi
    As far as my experience goes with this you have to maintain both router information in oss1 tcode
    Also mention second router on the second router tab on the SMP data
    I hope it should work with that as it will automatically create router table

  • Cross reference data from 2 different ecc system.

    Hi Sdners,
    Iam working on a scenario where i have to get data from two different Ecc system,consolidate them and send it back to their respective system.
    But some refernce data in both the systems are different and when iam merging data from 2 system i have to maintain either of the reference data.But problem comes when i syndicate it back to ECC ,it cannot accept a new reference data.
    Please suggest me some answere how to proceed in such case.
    Its urgent.
    Points will be rewarded for Genuine answeres.
    Thanks in advance,
    Regards,
    Neethu.

    Hi,
    First enable keymapping property to YES  for the table which you want to do
    importing and syndicatig.
    Create two remote systems type inbound/outbound .
    Import the data from first remote system and map the corresponding fields.
    Don't forget to map the remotekey field which is on the destination side.Make clone
    of one of the dispaly field and map to the remote key field.
    After importing you can see the records from which remote system are imported
    using Edit Key Mappings option in DataManager.It shows that remotesystem
    name and corresponding remote key.
    Do the same for second remote system too.
    After merging data in data manager , you can see the merged record and see the
    two remote systems names and two remote keys by using Edit Key Mappings
    option so the merged record goes back to both remote systems when you syndicate
    the records.
    Syndicate the data from first remote system by selecting destination properties and
    output remote system property under map properties tab as your first remote
    system.
    Do the mapping for corresponding fields and don't forget to map the value field under
    remote key .Then MDM generates remote keys for only records belongs to your
    first remote system.You can see this in destination preview.It does n't genarate
    remote keys for second remote system.Then check the option Suppress records
    without key under map properties tab and execute the syndication.Finally we can
    see the accurate records.
    Do the same for second remote system too.
    Hope it helps
    Cheers
    Narendra

  • Setting required to create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system

    Dear Experts,
    Can you please suggest me list of activities require to automatically  create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system .
    i.e If I create the customer master record and transfer the same CMR to SAP GTS , what are the setting requires to maintain in SAP GTS sytem to automatically create the Business partner .
    Ram

    Hi Raghu,
    Below are the main settings required to enable you to transfer Customer Master Data to SAP GTS. Please note that their is a difference between, Customer Master Record and Customer Master Data in terms of data and for GTS, we transfer Customer Master Data. Hence, below are the settings required:-
    In SAP ECC system:-
    Activate the change pointers for Customer Master Data apart from enabling basic connection settings.
    Schedule a job to run at regular intervals to transfer all the customer master data for the available change pointers to the SAP GTS system
      2.  In SAP GTS system:-
    Maintain the Mapping for ECC Customers to SAP GTS Business Partners in the General settings area of the SPRO in SAP GTS system
    Ensure that the Number range is maintained for those GTS  Business Partners.
    Also, some time you may be required to maintain the organisational structure to ensure full working.
    I hope this will be helpful to you.
    Regards,
    Aman

  • How to connect from VC++ 6.0 to Oracle 8i

    Can anybody tell me how to connect from
    VC++ 6.0 to Oracle 8i which is installed
    in server (without installing in client)

    Whats the problem you are facing, from what I see its pretty straight forward. Edit the system object, from 'Show Category' drop down select Internet Transaction Server, hit the modify button at the extreme right and your good to go.
    Thanks,
    GLM

  • How to connect from java without using oracle client installation

    hi ,
    Please tell me how to connect from java without using oracle client
    Thanks & Regars

    http://www.orafaq.com/wiki/JDBC#Thin_driver

  • How to check connection from SAP to reservation system?

    Dear Experts,
    May I know how to check whether the connection between SAP and the reservation system has been set up and ready to use?
    Thanks.

    Hi
    You need to check the identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
    External reservation system In the Travel Planning subcomponent Travel Management accesses an external reservation system connected to R/3 to carry out the queries on available travel services and to book the selected services. The reservation system currently available is the AMADEUS Global Travel Distribution system.
    For more information, see Technical Prerequisites for Travel Planning--
    Technical Prerequisites for Travel Planning
    Before you can use Travel Planning fully, a number of internal R/3 and external prerequisites or settings must be fulfilled.
    Connection to an External Reservation System
    The online booking function in Travel Planning is based on the cooperation with external reservation systems that are used to communicate with the service providers. The R/3 user has access to the following functions via the connection to an external reservation system:
    u2022 Availability query of travel services
    u2022 Transfer of additional information about selected travel services
    u2022 Price information
    u2022 Processing of reservation by the respective provider
    u2022 Synchronization of the data in SAP Travel Planning if external booking changes have been made
    In the current release the external reservation system in use is AMADEUS Global Travel Distribution. AMADEUS is a subsidiary of Lufthansa, Air France, Continental Airlines and Iberia. The reservation system it provides is in worldwide use and 160,000 terminals in 37,000 travel agencies and ticket sales centers in over 130 countries are connected to it.
    In order to carry out online booking via AMADEUS the following must have been carried out:
    u2022 Your enterprise must have signed an agreement with AMADEUS for the use of the interface and be registered at AMADEUS with a user ID
    u2022 A network connection to the AMADEUS computer center must have been opened
    u2022 The identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
    For questions about registration, contact the SAP & AMADEUS Competence Center:
    SAP & AMADEUS Competence Center ACC 02 Neurottstrasse 16 69185 Walldorf Germany
    Cheers
    Mukta

  • How to connect from SRM system to Punch out Catalog

    Hi all,
    I would like to know connecting from SRM system to Punch out Catalog , do we require XI inbetween??
    Regards
    Vamsi

    Hi Vamsi,
    There is an XML variant of the OCI interface as described in the OCI documentation attached. Using this you can use XML documents instead of plain HTTP for the OCI transfer. No specific configuration is required as a transformation agent is contained within the FUNCTION bbp_ws_mapoci_to_sc
      map xml to oci structure
        CALL FUNCTION 'BBP_WS_DISPATCH_XML_MAPPING'
          EXPORTING
            iv_xml_type       = iv_xml_type
            iv_xml_document   = iv_xml_document
          TABLES
            et_oci_items      = et_oci_item_data
            et_longtext       = et_oci_longtext
          EXCEPTIONS
            xml_mapping_error = 1
            OTHERS            = 2.
    In this xml mapping function we use a CALL TRANSFORMATION to perform the XML -> OCI mapping:
      Transfrom OCI XML data via XSLT to RFC structures
        TRY.
            CALL TRANSFORMATION bbp_oci_xml_to_rfc
              SOURCE XML IV_XML_DOCUMENT
              RESULT sc_items = lt_sc_items.
          CATCH CX_ROOT INTO lr_exception.
         CATCH cx_xslt_runtime_error.
            RAISE xslt_failure.
        ENDTRY.
      ENDIF.
    Put mapped data into export strutures
      LOOP AT lt_sc_items INTO wa_sc_item.
        IF NOT wa_sc_item IS INITIAL.
    Hopefully this clarifies the possibility of using the XML variant of the OCI.
    Regards,
    Jason
    Edited by: Jason Boggans  on May 13, 2009 6:54 PM
    Forgot to attach the document

  • How to createWebservice from Functional Module inECC system and how to test

    Hi all
    i have one functional module in backend system i.e BAPI_GL_ACC_GETLIST. now i want to create a Webservice from the above functional module. once the webservice is ready in ECC system then how do we access in webdynpro thru model. i want to test the same webservice in ECC system itself, what is the procedure??
    can any body send the clear steps on starting from create of webservice and till to access the same in webdynpro.
    if we want to access from webdynpro thru model for the  same webservice which did in ECC system, is it require to deploy on J2ee engine by creating the same webservice or we can access that directly in Webdynpro??
    can you please tell me clear steps on the same rather than documents??
    Regards
    Suresh babu

    Hi Suresh,
    refer This ppt link will  help you.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/244e7923-0a01-0010-5887-fe0b0c6dbb8d
    Supraja

  • How read information from other clients (other systems) of sap

    Hi
    I have a requiremt to read the roles assigned to a user id in production system to the developemet system.
    So how i can get this production system information from development.
    Could please  please let me know how to call the remote function calls.,  How to go about this.
    guys could you please help me out in this.
    regards,
    Steve.

    Hi
    -A) Trx SM59:
    Choose R/3 connection and search the production system connection.
    If there isn'r basis t, u or your basis should create it.
    -B) Create a program using a RFC function module to pick up the user roles:
    CALL FUNCTION <FUNCTION> DESTINATION <DEST>.
    Where <DEST> is the name of the production system connection defined in SM59.
    The function <FUNCTION> has to be a RFC (Remote Function Call) like a BAPI.
    MAx

  • SRM - Shopping Cart - how to debug BADI BBP_CREATE_BE_RS_NEW in ECC system

    Hi,
    We are using BADI BBP_CREATE_BE_RS_NEW (ECC system).
    We put external breakpoint on this BADI.   Made sure also that the BADI is activated.
    Our problem is it didnu2019t stop on our breakpoint.  Authorizations to debug/etc are there.
    When it was not possible to debug when shopping cart is created in internet link (SRM), we used tcode BBPSC01 (ECC system) to see if we can go to the BADI and debug it.  However still the program did not stop at break point at the ECC side.
    (SRM Module shopping cart)
    How do we debug this BADI in ECC?  Anything to set up or ?????
    SRM_SERVER   550   0013    SAPKIBKT13   SRM_SERVER 550: Add-on installation
    SRM add on to ECC 6.0
    Looking forward to hearing from you as soon as possible.
    Thanks.

    Hello,
    User calling BAdI in ECC must be a dialog one in order to be able to debug with.
    Check whom user is called in R/3 by having a look at RFC transactional assigned to your R/3 backend in SRM SM59 transaction.
    Then, in R/3, modify this user as a dialog one (type 'B') then put an external break-point for this user.
    Regards.
    Laurent

  • RFC Call from PI freeze ECC system

    Hello experts,
    we actually load master data in our ECC environment that are sent to the PI environment via IDOC, the integration of those IDOCs in the PI system make RFC call in ECC and after a few minutes, the ECC system freezes.
    All dialog process are occupied with report SAPLARFC/SAPLERFC/SAPMSSY1 with user PI2ABAP and WF-BATCH.
    We have increase the number of dialog processes, reduce the parameter rdisp/rfc_max_own_used_wp to 50, but each time all the dialog processes are taken until the system freezes.
    DO you know which parameter can restrict the number of dialog process used for RFC call?
    or maybe a method to avoid this high consumption of all dialog processes in the ECC environment?
    Many Thanks.
    Thibaud.

    Hello Juan,
    we have set this parameter to 3, but it seems to have no effect, I have applied the note 3223 that affects
    - rdisp/wp_ca_blk_no (for wp_ca blocks)
    - rdisp/appc_ca_blk_no (for appc_ca blocks)
    but now we have a problem at the start of the instance that does not support the new value and lead to the error
    Shared Pool Space exhausted.
    How can i check this value and can I modify it?
    Thanks.
    Thibaud.

  • 2 BI systems are connected to one SAP ECC-system

    HI,
    I have the following situation: we have one SAP ECC-system, and there is already one BI-system for one company code connected. I would like to connect now a second BI-system for another company code. Both BI-system uses more or less the same infocubes in controlling. I would like to copy all data sources in the ECC, so that I have every datasource twice, one for the first BI-system and 2 for the second BI-system.
    I thougth I could use transacioin code ROS2 for this. I created the datasource Z_CO_OM_CCA_1 and would like to use the function module BWOM_RS_GET_CTRCST and the extract structure ICCTRCST like the standard datasource 0CO_OM_CCA_1. During saving I get the error message TABLES-parameter E_T_DATA is missing - what does this mean?
    Is there another solution for my problem?
    I appreciate any kind of help!
    Thank's a lot
    Christine

    Christine,
    I would recommend to have a, lets say, maximum number of selection fields available and nothing BW-system specific. So as I mentioned before, no need to have the same datasources twice. In case of some, e.g. the logistics datasources, this might also be a enhancement/development that might be totally out of your budget. (Think about the setup tables, the processes to fill them....)
    regards
    Siggi

  • XI and PI connecting to the same ECC system

    I had read this thread XI and PI
    Currently, our ECC is connecting to XI.  In Integration Engine config of ECC, role of business system is "Application System".  In XI, role is "Integration Server".  If we need to add a PI and connect to ECC, what should be done or what is the workaround that can make XI and PI connecting to ECC at the same time?
    Thanks.

    Hi Mark,
    Thanks for the suggested blog, I need some time to study this.  I do not understand why 'standard' integration server is defined as 'Application System'. 
    I also need to study the limitation of SPROXY on SAP application server refer to only one XI/PI system.  May be the issue of my scenario is not just connecting multiple XI/PI to ECC system.
    The scenario:
    Maximo MEA 6.2  <->  XI 3.0 <-->  ECC     (current)
    Maximo MEA 7.5  <--> PI 7.x  <-->  ECC    (to be added)
    Any input or experience sharing?  Thanks.
    Regards,
    Donald

Maybe you are looking for