How to connect from Redhat Oracle10g server to Foxpro on windows server ?

they say it can be done by Oracle HSODBC, but i can't find Foxpro ODBC for Redhat.
i need to create some dblink to read/write data on Foxpro from Oracle.
does anybody have some experience about this ? pls advice.
thanks.
Edited by: HeLmi on Apr 30, 2010 4:57 PM

Heterogeneous Connectivity

Similar Messages

  • How to connect from InformixDB to SQL Server 2012 (and copy data)

    Hello guys
    I try to build a connection from an Informix (Informix2000) database to my SQL Server 2012.
    I really dont know how to do this...
    The plan is to build a job in the night in which data is beeing copied from the InformixDB to my SQL Server 2012
    The SQL server should be like a "archive server" (same data as informix DB , but the data should stay for 2 years)
    Any idea if this is possible ? (what im trying to do)
    Can i do this with ODBC Connection ?
    Thanks a  lot and Regards, Dominic

    Thanks a lot guys... but what im trying to do is not to migrate the hole Informix DB to SQL 2012, i just want to copy some data into my SQL Server (archive). in the informix DB the data is only 30days back... i want to transfer  every week
    the data and let it on the SQL Server 2 years back. (SQL Server should be like an archive system)
    Hello ,
    Then you need to create an SSIS package to migrate data from Informix to SQL Server 2008 since Informix is old I dont know which connection provider to use but you can try ADO.NET connection provider
    Can you check below link
    http://davidbridge.wordpress.com/2012/05/30/extraction-from-informix-database-using-ssis-data-warehouse-etl/
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • How to connect from VC++ 6.0 to Oracle 8i

    Can anybody tell me how to connect from
    VC++ 6.0 to Oracle 8i which is installed
    in server (without installing in client)

    Whats the problem you are facing, from what I see its pretty straight forward. Edit the system object, from 'Show Category' drop down select Internet Transaction Server, hit the modify button at the extreme right and your good to go.
    Thanks,
    GLM

  • HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA APPLICATION

    HI expects,
            HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA or . DET APPLICATION.please provide me some scenarios and documents.please help me.

    Hi,
    In the sender side i.e. in SAP system you can use IDoc/RFC/Proxy to push the data to XI.
    IDoc supports only Async communication and in Sync case performace is good using Proxy.
    In the receiver side you can use Java Proxy to connect to the Java application or you can even bulid a webservice over the Java/.Net application and use SOAP adapter to post data to it.
    Thanks
    SaNv...

  • How to connect from  bw system  ecc system.

    how to connect from  bw system  ecc system.

    Solution
    Maintain the entry using the following path:
    Call Administrator workbench (transaction RSA1).
    From the 'Settings' menu, select Global Settings'.
    If an entry already exists in the field "BW user for ALE", delete this.
    Enter the correct names for the BW users in this field.
    Save the entry.
    You must restart the Administrator Workbench (RSA1) now.
    The source system can now be linked without errors.
    hope this helps.

  • How to connect from java without using oracle client installation

    hi ,
    Please tell me how to connect from java without using oracle client
    Thanks & Regars

    http://www.orafaq.com/wiki/JDBC#Thin_driver

  • How to upgrade Windows Server 2008 Foundation to Windows Server 2008 Standard

    I have a Dell server with Windows Server 2008 Foundation installed. I am now on a larger network which has their own servers for authentication and the Windows Server 2008 Foundation will not let join a domain with more than 15 users. I was told that I needed
    to upgrade Windows server 2008 foundation to Windows server 2008 Standard and that process can be done "in place" but I can't find how do do it. I called Dell and they said they basically said they didn't know what I was talking about.
    How do I  do this?

    According to the first one you can perform an in-place upgrade.
    Introduction to Windows Server 2008 Foundation
    http://technet.microsoft.com/en-us/library/dd459191(WS.10).aspx
    How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
    http://support.microsoft.com/kb/2255099
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]

  • Issues when Sharepoint Services 3.0 OS upgraded from windows server 2003 standard to windows server 2003 enterprise

    In my sharepoint 2007, I have upgraded the OS from windows server 2003 standard to windows server 2003 enterprise R2 SP2. After the OS upgrade when I run the central admin it's showing this error "Microsoft Windows Sharepoint Services 3.0 Error 2908
    error has occurred" screen shot below of the error. 
    Any help?

    Not sure I can help.  In general MS does NOT support the upgrade of the Underlying OS without re-installing SharePoint.  Many of the prerequisites that were installed when SharePoint was installed are OS specific.  You can either contact
    Product Support and see if they can provide any assistance or re-install SharePoint from scratch and re-attach/migrate all the existing databases with content into the new system on the new OS.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • How can I install and run lookout 6.1 on windows server 2008 64-bit without errors?

    How can I install and run lookout 6.1 on windows server 2008 64-bit without any errors?
    I was unable to start the lookout applcation after I install the lookout 6.1 on windows server 2008 64-bit.
    (error code: 0xC0000142). Please help!
    Thanks

    This will pobably do http://joule.ni.com/nidu/cds/view/p/id/1051/lang/en but the major issue is that you should concentrate and read the instructions carefully. My two cents.
    Dieet
    Afvallen

  • How can i install application server 10g R2 on windows server 2008

    Dear friends,
    I need to install application server 10g r2 on windows server 2008.
    Is there any patch for this. where can I get those patches?
    plz help.
    Divya Alok

    MKBH wrote:
    Why OracleAS 10.1.3.x version doesn't have OracleAS Infrastructure components?Because not all OAS releases were complete software versions. By complete software versions, I mean they were not a software version where each component (like Identity Management, Portal, BI, SOA Suite, etc.) would have an updated version.
    OAS Release 2 (10.1.2.x.x) was a complete release but OAS Release 3 (10.1.3) was not. After release 2, Oracle Fusion Middleware OFM 11g is now a complete release.
    OracleAS Identity Mgmt (10.1.4) was the updated version of OAS Id Mgmt after OAS 10.1.2 and before OFM 11g.

  • Upgrade windows server 2008 x86 to windows server 2012

    Hello i am using windows server 2008 x86 as my primary domain controller,
    I want to install windows server 2012 R2 and make it additional Domain Controller and transfer the roles to make it primary Domain Controller.
    How do i upgrade the Schema as i am using windows server 2008 x86. and how do i transfer the roles.

    Hello,
    After successful installation of the Windows 2012R2 OS, go to the server manager and Install the Active Directory Server Role: In server manager go to manage-> add roles and features wizard -> skip welcome -> Select Role-based or Feature based installation
    -> Select your local server -> Select Active Directory Domain Services (including management tools) -> go throughout the wizard and press finish. Note, that schema upgrade would take care by itself.
    After the Role installation you have to promote the server as an additional DC to an existing domain: On the flag on top of the server manager's console, there should be 1 notification. Press the flag and select the "Promote this server to a domain controller"
    link. Choose the option to add a domain controller to an existing domain and go through the wizard.
    After successful completion (including restart) open command prompt as admin and type ntdsutil.exe -> ntdsutil prompt opens -> type Roles -> type connections -> type connect to server <your new Win12 server name> -> type quit to go to
    FMSO maintenance prompt -> type transfer infrastructure master (confirm transfer) -> type transfer naming master (confirm transfer) -> type transfer PDC (confirm transfer) -> type transfer RID master (confirm transfer) -> type
    transfer schema master (confirm transfer).
    To verify transfer: type select operation target -> type list roles for connected server
    Exit ntdsutil.exe (ctrl+C) and confirm configuration status by checking the event viewer and by running dcdiag.exe in command prompt.
    Lefteris Karafilis 
    MCSE, MCTS, SEC+ 
    LinkedIn: http://www.linkedin.com/in/lkarafilis 
    Mail: [email protected] 
    Blog: http://www.karafilis.net 

  • Installing Application Server 10g R2 on Windows Server 2008

    Hi all,
    I want install Oracle Application Server 10g R2 on Windows Server 2008 ( 64 bit).
    It always prompt error "ORA-12560: TNS Adapter error", when I try to install Oracle Application Server Infrastructure 10g.
    Does anyone know how to solve this problem?
    Thanks in advance.
    Regards,
    MKBH

    Basically use for internal web server only. I'm not sure can I use Oracle weblogic 11g instead of OracleAS 10g R2. I'll use some of the components like Oracle HTTP Server, Oracle Application Server Containers for J2EE(OC4J), Reports Services, Forms Services, Metadata Repository for Oracle Application Server Middle-Tier and etc.

  • Perform Forced Manual Failover of Availability Group (SQL Server 2012) and WSFC (Windows Server Failover Cluster)

    I have a scenario with the three nodes with server 2012 standard, each running an instance of SQL Server 2012 enterprise, participate in a
    single Windows Server Fail-over Cluster (WSFC) that spans two data centers.
    If the nodes in the primary data center are unavailable due to data center outage. Then how I can able to access node in the WSFC (Windows Server Fail-over Cluster) in the secondary disaster recovery data center automatically with some script.
    I want to write script that can be able to check primary data center by pinging some IP after every 5 or 10 minutes.
    If that IP is unable to respond then script can be able to Perform Forced Manual Fail-over of Availability Group (SQL Server) and WSFC (Windows Server Fail-over Cluster)
    Can you please guide me for script writing for automatic fail-over in case of primary data-center outage?

    +1 to David's comment. I would not suggest to run a script automatically. During such failover you might have data loss and decision has to be made with business owners during disaster.
    During such situation, you need to start cluster service in force quorum mode (/fq switch) and then perform manual failover of AG to DR site.
    Balmukund Lakhani
    Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
    This posting is provided "AS IS" with no warranties, and confers no rights.
    My Blog |
    Team Blog | @Twitter
    | Facebook
    Author: SQL Server 2012 AlwaysOn -
    Paperback, Kindle

  • Backing up Exchange Server 2013 CU3 with Windows Server Backup Program

    Looking at configuring Windows Server Backup Program to backup Exchange Server 2013 CU3 which is a member a DAG Group using a specific Backup Domain Account.  
    From my understanding from the following technet Article" Using Windows Server Backup to Backup and Restore Exchange Data" at  http://technet.microsoft.com/en-us/library/dd876851(v=exchg.150).aspx I cannot use wbadmin.exe has it uses an older
    unsupported version of Powershell.
    My question is what are the minimum AD rights required for an AD account needed to be able to backup/restore Exchange Datastore using Windows Server Backup Program in Windows Server 2012?
    Thanks,
    NIck 

    Hi Sathish,
    After looking at your response, it all make sense except when I look at what exchange right assigned via RBAC.  I understand that the backup service account will require access to the exchange databases
    to be able to backing and restoring them.  After looking at the different roles  
    I'm wondering if I require to assign both the Databases roles for Backing up the databases and the Disaster Recovery Role as well to be able to restore the databases has well as having a mailbox on the exchange
    server for the backup service account?
    Below is explanation of the roles via the ECP
    Database Role
    This role enables administrators to create, manage, mount and dismount mailbox and public folder databases on individual servers.
    Disaster Recovery
    This role enables administrators to restore mailboxes and database availability groups in an organization.
    Thanks,
    Nick

  • Auto rollback with no error when upgrading windows server 2003 sp2 to windows server 2008 R2

    Hi, I have a server needs to upgrade from windows server 2003 sp2 to windows server 2008 r2.
    It should be supported from technet site
    And yes, it went through all the list of upgrade. After rebooted, it told me "the upgrade was not successful, Your previous version of windows is being restored. Do not restart your computer during this time.".
    Is there a place located the upgrade failure log? What's the common cause about the auto roll back?

    Thanks for the reply.
    I copied some sentences in Setuperr.log
    2014-07-10 23:58:33, Error                       
    Failed to find driver file path. Error=00000002x[gle=0x80092004]
    2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.cnt' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
    2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.hlp' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
    2014-07-11 00:06:19, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll,
    {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-11 00:06:20, Error      [0x08085e] MIG    UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll]
    does not exist.[gle=0x00000003]
    2014-07-11 00:13:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll,
    {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-11 00:18:56, Error      [0x0803db] MIG    IndirectKeyMapper: Cannot find the currently loaded location for hive X:\Documents and Settings\####\NTUSER.DAT; giving up (2).[gle=0x00000003]
    2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x25 (CONFIGRET) occurred while determining the buffer size needed to hold the list of devices that are using service
    usbhub20.
    2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x424 occurred while opening a handle to the service usbhub20.[gle=0x00000424]
    2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setupact.log[gle=0x000003f0]
    2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setuperr.log[gle=0x000003f0]
    Is it caused by driver error, MediaPlayer-DLMigPlugin.dll
    and drmmgrtn.dll?

Maybe you are looking for

  • I am receiving a werfault.exe application error in windows 8.1 for design premium cs5.5

    Please help I am receiving a werfault.exe application error in windows 8.1 for design premium cs5.5. The product was previously installed on this machine and worked fine.  Today is did not load and said to re-install and I get the above error. Laura

  • Not Visible in iTunes and YouTube doesn't Connect in 2.3

    I was happily working away with ATV until upgrade 2.3 and iTunes 8 came out. Since then, I have reverted back to factory reset several times and find that this is the only reliable setup, I'd love to have my MobileMe gallery and YouTube working again

  • File Location External Processing Lab

    I know these have to be the dumbest questions, but I am a professional photographer who recently came from the dark side (PC) to an IMac. I thought Aperture would be the best route to go so I now have it too. I need to send my jpeg files to my lab, b

  • How to do with it?

    for example: table: emp includes below columns: order_number number, item_id number, item_des varchar(30), quantity number ect. sql: select*from emp result outputs: order_number item_id quantity item_des 1001 1 10 apple 1001 2 20 banana 1002 2 50 ban

  • Lost Videos on iPod Touch

    I restored my Ipod Touch recently and lost all my pictures and videos that I had taken/recorded recently (about 20). All my videos from a while ago are still there. They are no where to be found. Everything else was restored normally (music, notes, a