HOW TO Connect G5 to an HP2311x Monitor. ( G5 ADC outlet to DVI & VGA/HDMI Monitor )

I have a G5 I need to connect it to an HP2311x Monitor. How can I convert the G5 ADC outlet to the DVI & VGA / or HDMI outlet on the monitor. What is the best process? Can i convert the ADC to HDMI then go HDMI to HDMI ?! or do I need a splitter for ADC to VGA&DMI ? Pls HELP!
What cords / splitters / converters do I need to Buy?
O.O THANKS!

Hello,
First you need an ADC-> DVI converter...
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=219101&is=REG&A=details&Q =
Then if the Monitor doesn't have DVI, a DVI to HDMI adapter.

Similar Messages

  • How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

    How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

    Use a DVI to micro-DVI adapter if you're on an original MacBook Air, and a Mini DisplayPort adapter for a newer one.
    (119682)

  • Dual Monitor Hook-up, DVI/VGA/HDMI?

    I think it's time to retire my aging samsung 22" and buy a few 23" LED's to replace it.
    My graphics card only has DVI out (x2), and the 3 monitors I'm looking at do not have dual DVI (either dual HDMI and DVI, or DVI/VGA/HDMI), so I would need adapters from DVI to HDMI/VGA. I'm guessing that's all handled at the adapter/hardware level, so linux should have no problem finding them, but if I'm hooking 1 up natively to DVI, and the other through an adapter (or both through adapters), will I notice any quality difference between the 2 monitors?

    Cyrusm wrote:
    Personally I use my HDMI monitor as my main monitor and have the secondary monitor attatched to VGA. I can't really tell the difference in performance between the two, however I never work with anything terribly graphics intensive.
    and it hurts to hear that my Samsung 22" is also  'aging'  of course so is my 17" secondary I guess maybe that'll be my next investment...
    Sorry about the aging comment
    But this is the answer I was looking for! I don't want to have 1 monitor hooked up via HDMI and the other VGA and be able to see a noticeable difference between the 2. I don't do anything graphics intensive either.
    Thanks for all the responses!

  • How can I get a MacBook with a dead display to display to an HDMI monitor upon bootup?

    I have a MacBook with a dead display that I'd like to use as a desktop.  I also have a 23" monitor with VGA and HDMI input.  I am using the DVI adapter on the MacBook, and a DVI to HDMI converter to connect to the monitor.  The problem is that when it boots, it's extending the desktop over onto the monitor rather than mirroring or using that as the primary display, which is unhelpful.
    Is there a way to get it to use the external HDMI monitor as the primary? 
    Do I need to buy a mimi-DVI to VGA adapter to accomplish this?
    I know this works if I connect the MacBook to a monitor with DVI input.  The problem is that my only options are VGA or HDMI for my current monitor.
    Thanks!

    Yes. Use a Mini DisplayPort to dual-link DVI adapter.
    (71350)

  • An adapter for connecting a 2.5 GHz dual-core Mac Mini to a VGA CRT monitor?

    This question concerns the 2.5 GHz dual-core Mac Mini from Mid 2011 (Intel Core i5-2520M) (Macmini5,2).  Is there an adapter for connecting it to a VGA CRT monitor?

    store.apple.com/us/product/MB572Z/A
    Thunderbolt port is physically identical the miniDisplay port and can pass video for a monitor.

  • I need to connect an HDMI outlet to a VGA-only monitor.

    I need to connect an HDMI outlet (on a video recorder) to a VGA-only monitor, so that I can run my new Mac mini and the recorder to the same monitor. The adaptor supplied with the Mac mini is HDMI to DVI-D and I also have a cable from the Mini DisplyPort to VGA. This works well with the Mac mini to the monitor. Can I get an adaptor or cable to connect an HDMI male to a Mac DisplyPort female?

    I need to connect an HDMI outlet (on a video recorder) to a VGA-only monitor
    <http://www.sabrent.com/category/tv-video-capture/DA-HDVG/>
    Can I get an adaptor or cable to connect an HDMI male to a Mac DisplyPort female?
    Yes, but it for Mini DisplayPort displays, not VGA displays (even with adapters).
    <http://www.kanexlive.com/xd>

  • How to enlarge the tool bar and all fonts in the drop-downs using HDMI monitor due print is to small.

    I'm now using Win 7 and an HDMI monitor. The print and icons on the Firefox Toolbar, and the drop-downs is very small. How can I increase the font & Icon size on the Toolbar and all drop-downs?
    Thanks!

    Use this extension to adjust the font size for the user interface:
    *Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/
    *Big Buttons: https://addons.mozilla.org/firefox/addon/big-buttons/

  • Cannot connect Mini PPC 1.42 GHz to Panasonic Plasma via DVI-to-HDMI-Cable.

    Saw this question many times but never found a real Solution for that...
    I'm trying to connect an old Mac Mini Power PC 1.42 to my Panasonic Plasma. Using the DVI out and an Adapter to HDMI.
    In the Monitor-settings, I can see that the PPC found the TV. It is shown as "Panasonic TV" in the settings when I connect the cable. This, I can see while using Teamviever on my iPad, because the TV stays black. The TV does not seem to receive any signal actually.
    Does anybody know what to do? I can't imagine there's no solution.
    Please help!!

    Unbelievable but true! I've managed to solve the issue yesterday on my own.
    For those who are interested and didn't find a forum that helped much, here is an easy manual:
    Boot with normal Monitor using a normal DVI cable.
    Start Teamviewer so you can follow the next steps on an iPad, iPhone etc.
    Unplug normal monitor.
    Now use a DVI cable with HDMI at the other end.
    Plug in Panasonic Plasma TV by using the above mentioned cable.
    Now the plasma stays black, no signal arrives. Look at the iPad via Teamviewer and open monitor settings.
    This should show that the Panasonic has now been found.
    Switch the resolution to 1280x720.
    Tataaaaa!
    The Plasma TV now proudly shows the content of your Mac Mini PowerPC. Play with further settings in order to optimize the display width etc. Set the TV to 16x9 manually.
    Enjoy!

  • How to connect Satellite P100-429 to a LG LCD TV using a VGA?

    Having problems connecting my laptop to a LG LCD TV using a VGA cable, the TV keeps coming up NO INPUT

    In my opinion you use wrong port. I am not 100% sure but I believe you have S-Video port on notebook and use this port to connect your notebook to the TV.
    You need just the right cable. When connected enable S-Video port on TV.
    Generally speaking the same is with VGA port.
    Has your TV VGA port or you use some adapters?

  • How to connect Macbook pro to a projector with the Mini Display to VGA adapter?

    When I connect them nothings happens, the display has a blue screenshot for a few seconds and then get back to the normal view of my desktop. It's the same if I digit "cmd+F2"... Please help me.

    The default method for adding a second display is called Mirroring. It uses a lowest-common-denominator approach to choosing display resolution, and often guesses wrong.
    System preferences > Displays > ( Arrange) and drag the superimposed representations of the two displays away from each other to invoke "Extended desktop" instead. Then you should be able to set the resolution for the projector to a more reasonable one, and your picture should appear.

  • Satellite A200 - How to connect to TV?

    Hi, Dear.
    How I connect my laptop to tv with S-video Media Cable or VGA-RGB cable? I tried to connect by Fn+F5 but no signal comes out. If I use VGA -RGB cable something is comeing out on TV but its scrolling continuously .
    Kindly assist me..

    Hi
    You can use both cables to connect your notebook to TV. Its depending on the interfaces on notebook and TV but in both cases its the same:
    Connect the cable to notebook and TV, power on your TV and select the right channel and then power on your notebook. After boot procedure you can switch with FN+F5 between monitors.
    If you use S-Video cable make sure that you are using the right television encoding system, e. g. PAL or NTSC.
    > If I use VGA -RGB cable something is coming out on TV but its scrolling continuously .
    What settings did you use (screen resolution, screen refresh rate, etc.)

  • How to connect imac to tv?

    Hello All!
    I was wondering how to connect the imac 27in i5 to my hdtv. does apple offer a HDMI adapter?
    thanks!

    Hello I believe I'm attempting the same thing, and have a few further questions. Specifically this is for connecting a 27" iMac to a Samsung 46" tv.
    I thought I had the video portion down when I bought this cord:
    http://www.amazon.com/gp/product/B0002J28NQ/ref=oss_product
    I still think that may be the right cord. It connects fine to this Apple adaptor cord that came with the computer... I have two of them in fact. However the smaller end of the cord is not the same as what is on this Apple adaptor cord:
    http://store.apple.com/us/product/MB570Z/A?fnode=MTY1NDA3Ng&mco=MTA4NDU0ODY
    I think is the one I used, it has all the pins inside the little end.
    http://store.apple.com/us/product/M9320G/A?fnode=MTY1NDA3Ng&mco=MTA4NDU0OTc
    I have purchased this audio cord as well which I'm confident is fine, though hasn't arrived yet:
    http://www.amazon.com/gp/product/B000067RBT/ref=oss_product
    Could someone help me sort out the video side though?!?! THANK YOU

  • VGA monitors Via ADC Port

    I have two VGA monitors I want to use with the Powermac G5. One plugs in happily to the DVI monitor slot by way of a DVI-VGA adapter.
    I wanted to run the second one off the ADC slot. Couldn't find an ADC-VGA adapter so bought a ADC-DVI one and then plugged a DVI-VGA adapter into it. But this monitor screen is green. Have swapped the monitors over and swapped the DVI/VGA adapters over but always the same - Green Screen out of the ADC slot.
    So questions 1) Is there anything I can do about it without changing video card or buying DVI monitor 2) Will a DVI monitor work properly out of the ADC slot with the adapter I have just bought?

    http://www.google.com/products/catalog?client=opera&rls=en&q=adcto+vgaadapter&sourceid=opera&oe=utf-8&um=1&ie=UTF-8&cid=18358937889678973186#ps-seller s
    -DH

  • TV Apple TV MacBook Air:How to connect my computer's monitor and TV as multiple monitors (NOT mirroring)

    I have an insignia TV, an apple TV I just bought less than a month ago, and a Macbook Air (mountain Lion) and a MacBook pro (mountain lion).
    I am able to connectboth of my computers with the TV to mirror my screen/monitor, but I have not been able to figure out how to use the apple TV to use my TV as a second monitor, like I was able to do with my HDMI cable. 
    when I bought the Apple TV the person who I talked to at the store told me I would be able to do it, but I havent been able to do it through system preferences and the options for display only show as mirroring through Airplay. I dislike mirroring because while I play something on my computer (or somebody else does) I'd like to still be able to use my computer for browsing or doing homework.
    Please help me find a way in which I can make my TV as a second monitor tu my computer without having to have an HDMI cord across the room. I have a puppy and I have had problems with that. That is actually the reason why I considered buying the Apple TV device.
    NOTE: In case you know a way to connect my TV to my Macs I have a time capsule and my TV has a DVI, two HDMI, and a USB ports.
    thank you!
    Lydia

    Morning jotref,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    About AirPlay Mirroring in OS X Mountain Lion
    http://support.apple.com/kb/ht5404
    Best of luck,
    Mario

  • How to connect VGA Monitor via Thunderbolt Display

    I've been using my Macbook Air mid 2013 with a Samsung monitor connected via the Mini Display Port to VGA adapter. I've now bought a 27" Thunderbolt display, which I've connect to my Mac, and assumed I could now daisy chain my samsung monitor into the Thunderbolt port in the back of the monitor. This isn't working.
    Is this expected behaviour? Some people have said online that it will work if there's some other Thunderbolt peripheral between the Thunbolt Display and the VGA adapter, but I don't know what kind of peripheral they mean.
    Apple support says that my model Macbook air can power two external displays.
    How can I get this to work?
    Thank you

    I want to know if I can connect a vga monitor to the quad by simply getting a vga to dvi adaptor.
    Yes, you can.
    (50389)

Maybe you are looking for