How to Connect iPod 3rd Gen to Mac Mini

I have two iPod 3rd gen's but can not connect it to my Mac Mini due to the sync cable which connects to firewire.        I've tried looking for some type of adaptor that will allow me to connect the 3G sync cable to my mini but am having no luck. 
If anyone has a suggestion or can point me in the right direction I would greatly appreciate it.
Thanks !
Chuck  :- )

OK - just figured out that this is a 2nd generation ipod (20GB). It has a firewire port at the top with a cover over it. I just got off the phone with Apple Tech support and they suggested I try the forums, etc. They didn't know how to connect this ipod to a USB port. Anyone have any ideas?

Similar Messages

  • How to connect old 3rd gen firewire ipod to pc w/o firewire?

    Just got out my ancient 3rd gen 20GB windows-formatted ipod and its Firewire Cable (6pins on each side). I charged it, and now can't figure out how to connect it to my pc. I don't have any kind of dock - only the 6pin firewire cable (identical on each end).

    OK - just figured out that this is a 2nd generation ipod (20GB). It has a firewire port at the top with a cover over it. I just got off the phone with Apple Tech support and they suggested I try the forums, etc. They didn't know how to connect this ipod to a USB port. Anyone have any ideas?

  • How to connect Cinema Display A1081 to Mac Mini 2009

    This may seem an obvious question but the problem is that I am currently abroad, having bought a Mac Mini to replace my very old PowerMac G4, so I cant check if the cable that currently connects the old machine to my Cinema Display will also fit into the new Mac Mini.
    Any help or suggestions are gratefully received.

    Just other users here, no replies from Apple itself.
    Besides the included adapter working, there's a MDP to DVI adapter you can buy...
    http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter
    http://km.support.apple.com/library/APPLE/APPLECARE_ALLGEOS/HT3382/HT3382_4-mdp_ dvi_adapter--001-mul.png
    Video Card:
    HD Graphics 4000
    VRAM Type:
    Integrated
    Details:
    This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system. Also see: What type of video system is provided by the Aluminum Mac mini models? Which are integrated and which are dedicated? Can the video be upgraded?
    Standard VRAM:
    512 MB*
    Maximum VRAM:
    512 MB*
    Details:
    *Apple quietly reports that with 4 GB of RAM installed, this model uses 512 MB of RAM for graphics. With additional RAM installed, more RAM may be reserved for graphics use.
    Display Support:
    Dual Displays
    Resolution Support:
    1920x1200*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapter and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i5-2.5-late-2 012-specs.html

  • How to connect Zi6 HD camera to mac mini for video in?

    I am wondering what is the best way to connect my Koday Zi6 HD camera to my mini so that I can grab video directly from the camera. The camera has HD and AV mini jacks. It also has a built in flip out usb socket, like the flip camera, but this I believe is only used for uploading video files.
    I have had a look around the cables section of the Apple store but nothing leapt off the shelf!
    Any ideas?

    Is there such a thing as a USB to AV phono adapter?
    Not as a simple cable, no. You would need a device to convert the AV stream. Personally I use an old(ish) Sony camcorder for this task, but there are other solutions. You might have a look at Eye TV products (http://www.elgato.com/elgato/na/mainmenu/home.en.html) for example.
    If not I guess I'll need to buy that iMac a little earlier than I had planned.
    An iMac won't offer you any more options for this than a mini - neither have the means to accept AV input via composite, component etc.

  • My ipod 3rd gen. touch screen is unresponsive, cant slide to unlock or enter passcode to access ipod. What is the cause? how do i fix this?

    my ipod 3rd gen. touch screen is unresponsive, cant slide to unlock or enter passcode to access ipod. What is the cause? how do i fix this?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • IPod 3rd Gen Not Connecting to Windows AT ALL

    i have an iPod 3rd Gen 10gb. I use firewire to connect it to my iPod. When i connect it, it shows that it is charging but that is all. my computer won't recognize it at all. i tried a new cable, a new firewire card, i bought a USB cable, reinstalling iPod software and iTunes, the 4 R's obviously not restoring cuz it wont connect. i basically tried everything but no luck. any help would be appreciated.

    Do you use iTunes 7? If so please read the Topic I posted. Apperently I got the same problem with a new Nano. I discovered that when you attach the iPod DURING a Windows XP reboot it WILL WORK and see the iPod ...... until you disconnect again.
    Please see the Topic I posted:
    http://discussions.apple.com/thread.jspa?threadID=647294&tstart=0
    Best regards
    TheFactory

  • I recently purchased new Mac Mini with Lion installed. Now I can't get iTunes to sync iCal from my iPod Touch (3rd gen) to my Mini.

    I recently purchased a new Mac Mini with Lion installed. I downloaded the latest version of iTunes. Now I can't get iTunes to sync iCal from my iPod Touch (3rd gen) to my Mini. Everything else syncs great, and iCal syncs from my Mini to my Touch. My Touch has the latest iOS installed. I have tried rebooting my Touch, removing the sync calendars option from iTunes>Info and checking it again after applying and closing iTunes, and restarting my Mini. Any help will be appreciated!

    Ongoing thread with the same question https://discussions.apple.com/thread/3209335?tstart=0
    Stefan

  • Connectivity issues bet ipod 3rd gen and winxp / win 7

    Device: ipod 3rd gen (in excellent working condition with new battery)
    OS: win xp, win 7
    As fire wire ports are no longer available on laptops with win OS, I bought a new apple cable that connects to the dock connector on the ipod and the other end of the cable has a usb port. Now when I connect the ipod to a win XP PC it shows as up a "removable disk drive" and the ipod displays "disk mode". But the itunes (ver10.5.2.11 - the latest ver) does not detect the ipod at all. A strange predicament. I wonder if there are any drivers that I need to install for windows to be able to see the ipod. Pl advice on location and the ver / name of driver that I may download from somewhere.

    Your problem is the connection. The 3rd generation iPod requires Firewire which will charge the battery while it is connected. It will not work with USB. There is hope-Apple used to sell a combo USB/Firewire cable(USB connects to the computer and Firewire to the A/C adapter) and I think others now manufacture a similar cable.

  • I purchased an AAXA tech. p1jr and was wondering, How can I make it project my ipod 3rd gen out?

    Here is the description on the auction: http://i.imgur.com/kydpt4G.jpg
    Here is an album of everything I've received, could anyone tell me if I have everything to get going? Am I missing something? This is for an ipod 3rd gen. I think I might be able to do it, or I'm just missing 1 piece?
    Album here of EVERYTHING I got, and close ups of inputs: http://imgur.com/a/3hd9p
    Any help would be AWESOME!

    bump

  • Old iPod 3rd gen not showing up in iTunes

    Hi, I realize this may be a futile effort but I thought I would give it a try.
    I have an old ipod, 3rd gen 15GB that still works fine, stores a lot of music and plays fine. I would like to update and restore it. I have the old computer I used it with, an iBook G4 OSX 10.4.11 running iTunes 8.2.1, the most updated it can get for this computer I think.
    Im just wondering how I can restore the ipod and put mp3s on it. It doesnt show up in itunes but appears to be charging when I plug it in with the old firewire cable. its working ok to the best of my knowledge and I would like to do a hard reset or something but I cant figure out how. Any help would be appreciated. Thanks!

    Hey there Miles,
    It sounds like your iPod isn't showing in iTunes when you connect it to your Mac. I would start with this bit from the following article:
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    First, try the steps in the iPod Troubleshooting Assistant which applies to your iPod.
    If you still cannot get the device to appear in iTunes, use the following link to help troubleshoot it:
    iOS: Device not recognized in iTunes for OS X
    http://support.apple.com/kb/TS1591?viewlocale=en_US
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Ipod (3rd gen.) does not mount to iTunes

    My ipod (3rd gen.) does not mount on iTunes (using a Mac).  When plugged in, it appears on my desktop as if it were a jump drive.
    I was planning on re-formatting it with Disk Utility but I'm not sure if this is a good idea.  I also realised that the Format is listed as Windows NT File System (NTFS) when I have the disk utility window open.  If I need to format with Disk Utility, what format option should i choose? (i.e. Mac OS Exteneded (Journaled), Mac OS Extended etc.)
    Thanks in advance!!!

    Now when I connect the Ipod to my Mac, it mounts as a Device on iTunes.  I want to sync only a few items from my library onto this iPod - when I attempt to do this (by either adding the specific music to the "music" section on the iPod or creating a playlist and using Autofill to fill the iPod), the iPod says that it has Synced but when I disconnect the iPod, there is no music on it.  Why?

  • IPOD 3rd Gen not recognized by itunes on firewire but it does on USB

    Hi,
    I have a 3rd gen Ipod (the one with the buttons) since its release date.
    It worked perfectly with FIREWIRE.
    Months ago i restore it and now it's a mess.
    I have to connect it via USB to sync it with my itunes library, to
    delete music, to add new one, or use it as a hard disk. But,
    the battery doesn't charge (actually the battery now only lasts for 1 hour)
    If i want to charge the battery i have to connect the ipod to the computer
    via FIREWIRE, but it doesn't get recognized by itunes, so i cant update
    it.
    I wanted to restore the ipod but if i connect it via USB, itunes send me a message
    that i have to connect it via firewire in order to restore it. But if I connect it
    via FIREWIRE i can't restore it because ITUNES doesn't recognize it.
    I hope someone can help me.
    thanks a lot
    IPOD 3rd Gen 15 gb
    Powerbook G4 with Panther 10.5.8

    If I were you, I will solve from the root i.e. replace the battery, you can do it with quite reasonable price here
    http://www.ifixit.com/iPod-Parts/iPod-3rd-Gen

  • NEED HELP FIXING MY IPOD 3RD GEN! PLZ!

    ok so i have an ipod 3rd gen. and recntly its been acting up... i cant get on the internet NONE of my apps are opening and it wont let me even listen to not even half of my music that i payed for! ive had it since 2009 on my 10th birthday now 4 yrs help!!

    Connect the iPod to your computer and restore via iTunes.
    iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad

  • Loading songs on ipod 3rd gen nano without itunes

    is there a way to get songs onto the new Ipod 3rd gen nano 8GB without using Itunes? I have tried Xplay 2.3.5 and the playlist is all messed up. It would show all the songs in my hard drive on every single playlist created, even the On-the-Go list. I would hate to use Anapod because of they limited activation status. Itune is slow, and too restrictive for me. I hate itune with a passion. So does anyone know a way to get songs onto this ipod properly with Xplay or another good program? I have tried everything i know and I am able to throw this thing against the wall. thank you in advance!

    I feel your pain. I have been fighting iTunes and QuickTime for 2 weeks trying to get it so that it does not interrupt my wireless USB connection when ejecting the Nano. A simple solution would be to use another program to manage the syncing of stuff to the iPod.

  • My iPod 3rd gen does not mount in iTunes 11.3.1

    My iPod 3rd gen does not mount in iTunes 11.3.1

    Hey there JeanMontreal,
    It sounds like your iPod Nano 3rd generation is not being seen in iTunes when you connect it. I would use the troubleshooting from the following article to help you get that issue resolved:
    iPod nano (3rd generation) Troubleshooting Assistant
    https://www.apple.com/support/ipod/five_rs/nano3gen/
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

Maybe you are looking for

  • Disappointed with support

    I once commented to a BB employee that the reason Circuit City went out of business was that BB had it all over CC in terms of customer service in the stores.  People always willing to help.  I wonder now if CC might be the victor these days if they

  • Clipping Mask not working

    Okay, so I am EXTREMELY new to this (I started about an hour ago!) I am trying to make a clipping mask with the mask being the outline of France and the image inside the French flag. Here are the steps I've taken so far: File>New Open>Silhouette of F

  • Bursting with BO EDGE ?

    How can we do bursting with BO EDGE?  I have a Crystal Report(2008) which is extract data from SAP through the SAP integration kit.  I also have BO EDGE 3.0 and I would like to publish this report to many sales rep with their own data.  Then, I know

  • Delete duplicate records

    Hi everyone, I am writing a statement to delete duplicate records in my data. For example: select identnr,datum,klokin,klokuit,count(datum) from fus_timesheets group by identnr,datum,klokin,klokuit having count(datum) > 1; Above code gives following

  • Switchover in a data guard environment using Grid Control 10.2.0.3

    I've tested switchover in a data guard environment using Data Guard Broker in Grid Control. However, at times, i receive the message "RemoteOperationException: failed to establish input streaming thread". It looks like it has problems connecting to t