How to connect letters?
Hi I am a noob here but I've got to start somewhere, so here I am. Anyway In Illustrator cs5 how would I take a word like Soup7 and connect the top of the letter S with a line. I have tried the pen tool and i made a box but i had no success because the anchor points werent congruent to the top of the 7 and the the top of the soup.
THanks for your help guys.
you,
You may Type>Create Outlines, then adjust and combine/build on the (compound) paths that form the characters.
The Illustrator forum is the obvious place to ask such a question:
http://forums.adobe.com/community/illustrator/illustrator_general?view=discussions
Similar Messages
-
How to connect the two field which have a diffrent length
Hi,
i have two table one is VBRP-VGBEL CHAR 10
second is MKPF-XBLNR CHAR 16
both are same data means vgbel eq xblnr.
how to connect these table because when i connect these table it gives me error
have a same type and length.
please give me reply soon . Thanks.
dineshHI
I GOT THE SAME PROBLEM AT THAT TIME I DONE LIKE THIS
I THINK IT MAY HELPFULL FOR YOU
OBJID = 6 CHAR
SOBID = 40 CHAR
I GOT THE SAME ERROR WHAT YOU GET
I NEED ONLY 6 CHAT SO THAT WHY I HAD WROTE THIS LOGIC
1ST I HAD DECLARED THE SAME STRUCTURE TWICE
IN FIRST ONE IT IS NORMAL DECLARATION
IN SECOND ONE I HAD DECLARED THAT 2 FIELDS AS THE SAME LENGTH
I HAD PUT THAT IN THA BOLD LETTERS
AND AFTER THAT I HAD LOOPES THAT WORK AREA AND CONVERTED THAT SZE
REWARD IF USEFULL
TYPES : BEGIN OF ST_HRP1001,
OTYPE TYPE HRP1001-OTYPE,
<b>OBJID TYPE HRP1001-OBJID</b>,
RELAT type hrp1001-RELAT,
BEGDA TYPE HRP1001-BEGDA,
ENDDA TYPE HRP1001-ENDDA,
SCLAS TYPE HRP1001-SCLAS,
<b>SOBID TYPE HRP1001-SOBID,</b>
END OF ST_HRP1001.
TYPES : BEGIN OF ST_SOBID,
OTYPE TYPE HRP1001-OTYPE,
<b>OBJID TYPE HRP1001-OBJID,</b>
RELAT type hrp1001-OBJID,
BEGDA TYPE HRP1001-BEGDA,
ENDDA TYPE HRP1001-ENDDA,
SCLAS TYPE HRP1001-SCLAS,
<b>SOBID TYPE HRP1001-OBJID,</b>
END OF ST_SOBID.
SELECT OTYPE
OBJID
RELAT
BEGDA
ENDDA
SCLAS
SOBID FROM HRP1001 INTO TABLE IT_HRP1001
WHERE OTYPE = 'D'
AND OBJID IN S_OBJID
AND BEGDA GE DATE-LOW
AND ENDDA LE DATE-HIGH
AND ( SCLAS = 'E' OR SCLAS = 'ET' ).
IF SY-SUBRC NE 0.
MESSAGE 'NO RECORD FOUND FOR THE GIVEN SELECTION CRITERIA ' TYPE 'E'.
ENDIF.
LOOPING TO CONVERT THAT FIELD LENGHT
<b> LOOP AT IT_HRP1001 INTO WA_HRP1001.
WA_SOBID-OTYPE = WA_HRP1001-OTYPE.
WA_SOBID-OBJID = WA_HRP1001-OBJID.
WA_SOBID-RELAT = WA_HRP1001-RELAT.
WA_SOBID-BEGDA = WA_HRP1001-BEGDA.
WA_SOBID-ENDDA = WA_HRP1001-ENDDA.
WA_SOBID-SCLAS = WA_HRP1001-SCLAS.
WA_SOBID-SOBID = WA_HRP1001-SOBID.
APPEND WA_SOBID TO IT_SOBID.
ENDLOOP.</b>
SELECT OTYPE
OBJID
AEDTM
UNAME
DELET
CANCR
NCONT
FROM HRP1026
INTO TABLE IT_HRP1026
FOR ALL ENTRIES IN IT_SOBID
WHERE OBJID = IT_SOBID-SOBID
AND ( OTYPE = 'E' OR OTYPE = 'ET' )
AND DELET = 'X' AND
BEGDA GE DATE-LOW AND
ENDDA LE DATE-HIGH. -
How to connect my friends apple notebook through video call
HOW TO CONNECT TO A FRIEND WHO IS USING APPLE NOTEBOOK FROM MY IMAC SUGGEST ME WAITING FOR A SOLUTION FROM APPLE TEAM SUPPORT
Hi,
Typing in all upper case is regarded and shouting here.
Presumably as you have posted in the OS X 10.7.x (Lion) area you are running this version of the OS on your iMac.
This will have iChat 6 on it.
This can use AIM, Jabber and Yahoo IDs within the app.
Apple IDS ending in @mac.com and iCloud issued @me.com and @icloud.com are also Valid AIM Screen Names.
If you use Googlemail and Enable "talk" in the products there you can then use your Google Mail ID as a Jabber ID (although it has it's own Add Account option in iChat)
Facebook has an option to Enable "Chat" which will give you a Chat ID variant on your name there and this can be used in iChat (or Messages) as a Jabber ID.
The Yahoo Account will only do Text chats.
It also has to be an actual ID registered at Yahoo.
Chats are then AIM to AIM or Jabber to Jabber or Yahoo to Yahoo.
So your Buddy will also need a suitable ID or Screen Name for the relevant service.
8:16 pm Sunday; January 19, 2014
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks
You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
Check your MacBook Pro model year against the list in this Apple tech note:
About Mini DisplayPort to HDMI adapters
Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI. -
I need to know how to connect my macbook to the tv
I ordered the mini dvi adapter for my macbook 13in and obviously it connects to the computer but i have no idea how it connects to the tv. Where does it go? and do i need something else to help connect it to the tv? I am really confused please help.
Yep, Apple makes adaptors to go from the mini DVI on the macbook to almost any type of input that you TV will have. First check the back of your tube to find out what kind of input it has, and order the appropriate adaptor.
Luck
E -
How to connect a Sony Bravia TV to the internet through your Airport network
Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.I have now had a detailed reply from Sony Europe and the way to do this is to:
1. Press Home on the TV Setup
2. Use the right and left arrow to select Setting.
3. Use the up and down to select Network, press Enter.
4. Select Network Setup.
5. Select Wireless setup.
6. Select Scan
7. Select your network
8. A new screen will appear asking for entering the security key.
9. Enter your WPA2 key.
10. Select Enter.
11. It will take you back to the same screen asking for entering the
security key.
12. Press the right arrow.
13. Select Auto.
14. Press the right arrow.
15. Select Save and connect.
These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem. -
How to connect my Mac book Pro to a TV
How to connect my MacBook Pro to the TV using HDTV cable
I am assuming your TV has HDMI connector.
In that case, if your MacBook is the retina-one, you have HDMI connector there too. All you need is HDMI cable to connect teh two.
If your MacBook has thunderbolt port instead, you need Mini DisplayPort to HDMI adapter and HDMI cable.
Hope this makes sense. -
How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
SigveHi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve -
How to connect my iPhone and iPad to Apple TV
How to connect my iPhone and iPad to Apple TV
Connect the iPad and Apple TV to the same WiFi network. Double Tab the home button on the iPad and then swipe your recently used apps from left to right until you see the mirroring icon which looks like a retangle with an up arrow. Tab that icon until you see the Apple TV. Tab Apple TV and slide the slider to the ON position. You should now see your iPad screen on the TV the Apple TV is connected to.
-
How to connect my ipod to itunes if my ipod is disabled and my top button is broken
how to connect my ipod to itunes if my ipod is disabled and my top button is broken
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
How to connect my perfectly-working 20-year-old Apple Personal Laserwriter 320 to my iMac running Mountain Lion?
Thank you, Morty S.I have a perfectly-working LW 4/600 with exactly the same issue. They use localtalk - a long obsolete network connection, that doesn't connect to modern networks, and appletalk as the comm protocol.
I think the only choice you have is to use an old powerPC Mac as print server. You tell me which old Mac you have, with a localtalk connector, or that runs OS X 10.4 or earlier (so it speaks appletalk), and I'll tell you how I've done it for the past 11 years or so.
Right now I use a G4 running 10.4.11, plus an etherMac ethernet to localtalk adapter.
Before, I used a PMac 6100 running LPD server software. -
How to connect my phone with the cloud
How to connect my iphone to the cloud so I can download Itunes
Do you have an Apple ID, and are you signed in, go into your settings>iCloud to check. You shouldn't need to download iTunes because that app is on your iPhone, could you give me more information of what you are trying to download.
-
How to connect my guitar into my new 13'' macbook pro using headphone's port?
how to connect my guitar into my new 13'' macbook pro using headphone's port?
you need a standard guitar cable and a 1/4 inch to 1/8 inch adapter such as this http://www.amazon.com/Recoton-CW1521-4-Inch-8-Inch-Adapter/dp/B00006HOIW
-
How to connect my ipad with mac using bluetooth?
how to connect my ipad with mac using bluetooth?
You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
iOS: Supported Bluetooth profiles -
how to connect my iphone to iTunes with my imac so i can mannage my songs and other documents on my phone
Launch iTunes on your Mac, plug your phone in, select it in the sidebar, select what you want to sync under the various tabs, hit the sync button. If the sidebar is not visible, go up to the "View" menu & select "Show Sidebar".
Maybe you are looking for
-
Deploying properties files outside of the web application in WebLogic 8.1
Hi I am wondering if it is possible to deploy a web application and place configuration files (properties files, log4j xml files etc...) in a folder somewhere within WebLogic that is on the Server instance classpath. This would allow me to
-
How to copy images from another MC in reversed order??
Hi everyone, I'm new to AS3 and have been fighting and searching for a solution to this problem for a week now, and I'm VERY close! I crated a MC holding of a series of images (about 50) and I jump around in it using plenty AS3 scripts (most of which
-
Copy the value of a cell in an other tab.
Hi, First of all, I'm french. I hope you could understand my poor english. I've a got a form with a tab where u can ad or sup raws. I've gat a second tab. I'd like to copy the value of the cell (textfield) in a cell in the second tab. I've try "this.
-
New iMac and Older PowerBook sync
I have powerbook with 10.6.8 sync'd with iPhone (using MobileMe, I think). Works great. Got a new iMac with 10.8.2. How do I make all have same contacts, calenders, etc.? I also want to put all music files on new iMac to free up disk space on Power
-
BPC7.0 NW Server installation Problem
Hi, We installed BPC 7.0NW Server in windows Server 2003 Operating system. Afer installation we tried to start server manager but we are getting "your login id does not have systemadmin rights. you must log on with a user id that has sysadmin privile