How to connect LG phone camera to MPB?

how to connect LG phone camera to MPB?

Have you tried something like http://www.macupdate.com/app/mac/33442/fonesync-for-lg-phones?
Message was edited by: EZ Jim
Mac OSX 10.10.1

Similar Messages

  • How to connect my phone to macbook air for the call feature ?

    Hi, my macbook air, 2014 just upgraded to OS X Yosemite. My iPhone is the 5 version, iOS 8.02. I don't know how to connect my phone to the mac for the call feature. What should I do first?
    Thanks very much!

    Check these settings:
    On the phone:
    On your Mac (FaceTime Preferences):
    Your AppleIDs for both need to be identical, and both using the same WiFi network.

  • How to connect my dv camera to my mac and make movies?

    i just got my new macbook and dont no how to connect my dv camera to it...i got a software disc for my dv cam but it doesnt run automatically and i dont no how to install it....it is usb connection...do i need fire wire?...help me plz help...getting frustrated ...is the any sites that help with macs ..cuz im use to pc...dont no anything bout macs...thanks so much!!!

    Hello,
    It would be helpful to know what camera you are trying to connect and what exactly you are trying to do with it.
    In regards to firewire vs usb i only really have experience with firewire so i can not help you there unfortunatetly.
    If you are just trying to get the video footage off the camera you could try and open up iMovie from within you applications folder. Attached the camera, my iMac is currently in for repairs so i can quite tell you the whole thing but look for options of attached cameras.
    The reason why the cd doesnt autorun is that it is probably window software, does the disk specifically state Mac OS X?. If you double click on the cd it should open up in a window. Have a look around for any Mac folders or any obvious applications that you can run.

  • Dear sir how to connect i phone 4 to pc

    dear sir how to connect i phone 4 to pc

    Stop being so impatient.
    We are all users like yourself, Apple does not read or respond here.
    Plug the device into the computer and it should automatically be detected.
    iTunes can be downloaded by clicking on the iTunes link at the top of these forums.

  • HT201269 how to connect I-phone 5S to a computer to transfer audio and data files

    how to connect I-phone 5S to a computer to transfer audio and data files

    You asked the same question 20 minutes ago and I answered it then
    https://discussions.apple.com/thread/6029247

  • How to connect to Digital Camera using JMF?

    How to connect to Digital Camera using JMF?
    Any example?
    thx

    If the DC has a mode that works like a web cam, and can generate either a VFW or DirecShow stream, then you could capture a frame of the stream, yes.

  • HT201269 How to connect I phone to PC ?

    How to connect I phone to PC ?

    You asked the same question 20 minutes ago and I answered it then
    https://discussions.apple.com/thread/6029247

  • How to connect android phone with iPad mini

    How to connect android with iPad

    What is it you want to do by connecting?
    Tethering an iPad to an Android Cell Phone
    http://everydaylife.globalpost.com/tethering-ipad-android-cell-phone-33675.html
     Cheers, Tom

  • HT2702 how to connect a phone to bluetooth

    I am trying to connect my phone to my mac. It says that it is paired, but it is not connected. What is the difference, and how do i fix that?

    For what purpose are you trying to connect them?
    The only supported Bluetooth function between a Mac and iPhone is internet tethering.

  • How to connect my phone with the cloud

    How to connect my iphone to the cloud so I can download Itunes

    Do you have an Apple ID, and are you signed in, go into your settings>iCloud to check.  You shouldn't need to download iTunes because that app is on your iPhone, could you give me more information of what you are trying to download. 

  • How to connect a DV camera through the IEEE 1394 port on my A50?

    Hi
    I have been trying to connect a video camera to my notebook SA50-109 throught the IEEE 1394 port.. but the notebook didn't recognize the camera at all..
    although the camera shows 'DV-in' when i plug the cable witch is (4-pin to 4-pin) DV cable..
    is there any thing I need to do before to make it work?
    any ideas.. please?

    Hi there. Your PC should recognize automatically the DV camera. It's OK to have the firewire (1394) connection shown under "network connections". Next to mine it says "connected" although the harddisk connected to it is switched off. Maybe there is something wrong with the cable? Or, another suggestion, try to restart the laptop while the camera is connected ... Not many further suggestions I'm afraid ... Good luck!

  • How to connect a video camera (not a webcam) in a way that Flash player sees it as webcam

    Dear All,
    I'm working on an interactive/augmented reality project for an exhibition, where viewers trigger a video by standing at a certain point in a room (just like BBC's Frozen Planet). My problem is that the webcam's image that we've used to capture the audience is not up to the task and produces a really low quality image. Now I'm trying to to attach a video camera with Blackmagic's Mini Recorder but Flash Player 17 (standalone) doesn't recognise the the input as a webcam. Is there a way to connect an external camera so flash can handle it? Alternatively, can anyone recommend a superb webcam, that is SIGNIFICANTLY better than Logitech's Pro 910? Thanks in advance!

    We just get a list of webcams from the browser (who gets them from the OS).  If you could convince the OS that the camera is a webcam, you'd be good, but that probably means writing your own drivers.
    Alternatively, could you use something like Flash Media Server with the camera attached as a live video source, then stream a high-res video back to the client for processing?

  • How to connect i phone to i pad?

    How do I connect my i phone to my i pad?

    What are you trying to achieve...
    Ipad User Guide
    iPhone User Guide

  • How to connect Motorola phone to Arch.?

    Hi.!
    I have Motozine ZN5 which I want to connect with my Arch box via USB so that I can transfer files,SMS etc. between the two.I tried out Wammu but it couldn't detect my phone.I can see my phone listed when I run lsusb command.How do I go about from here.?

    Thanks for quick responses.
    I tried connecting as a mass storage device.Here is the relevant part of dmesg output:
    usb 1-5: new high speed USB device using ehci_hcd and address 2
    usb 1-5: configuration #1 chosen from 1 choice
    Initializing USB Mass Storage driver...
    scsi2 : SCSI emulation for USB Mass Storage devices
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    scsi 2:0:0:0: Direct-Access Motorola MSnc. 0101 PQ: 0 ANSI: 2
    sd 2:0:0:0: [sdb] Attached SCSI removable disk
    sd 2:0:0:0: Attached scsi generic sg2 type 0
    scsi 2:0:0:1: Direct-Access Motorola MSnc. 0101 PQ: 0 ANSI: 2
    sd 2:0:0:1: [sdc] Attached SCSI removable disk
    sd 2:0:0:1: Attached scsi generic sg3 type 0
    usb-storage: device scan complete
    sd 2:0:0:1: [sdc] 804324 512-byte hardware sectors (412 MB)
    sd 2:0:0:1: [sdc] Write Protect is off
    sd 2:0:0:1: [sdc] Mode Sense: 03 00 00 00
    sd 2:0:0:1: [sdc] Assuming drive cache: write through
    sd 2:0:0:0: [sdb] 3920639 512-byte hardware sectors (2007 MB)
    sd 2:0:0:0: [sdb] Write Protect is off
    sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
    sd 2:0:0:0: [sdb] Assuming drive cache: write through
    sd 2:0:0:1: [sdc] 804324 512-byte hardware sectors (412 MB)
    sd 2:0:0:1: [sdc] Write Protect is off
    sd 2:0:0:1: [sdc] Mode Sense: 03 00 00 00
    sd 2:0:0:1: [sdc] Assuming drive cache: write through
    sdc:
    sd 2:0:0:0: [sdb] 3920639 512-byte hardware sectors (2007 MB)
    sd 2:0:0:0: [sdb] Write Protect is off
    sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
    sd 2:0:0:0: [sdb] Assuming drive cache: write through
    sdb:
    usb 1-5: reset high speed USB device using ehci_hcd and address 2
    sd 2:0:0:0: [sdb] Device not ready: Sense Key : 0x2 [current]
    sd 2:0:0:0: [sdb] Device not ready: ASC=0x3a ASCQ=0x0
    end_request: I/O error, dev sdb, sector 3920384
    Buffer I/O error on device sdb, logical block 3920384
    sd 2:0:0:0: [sdb] Device not ready: Sense Key : 0x2 [current]
    sd 2:0:0:0: [sdb] Device not ready: ASC=0x3a ASCQ=0x0
    end_request: I/O error, dev sdb, sector 3920385
    Buffer I/O error on device sdb, logical block 3920385
    Buffer I/O error on device sdb, logical block 3920386
    Buffer I/O error on device sdb, logical block 3920387
    Buffer I/O error on device sdb, logical block 3920388
    Buffer I/O error on device sdb, logical block 3920389
    Buffer I/O error on device sdb, logical block 3920390
    Buffer I/O error on device sdb, logical block 3920391
    sd 2:0:0:1: [sdc] Device not ready: Sense Key : 0x2 [current]
    sd 2:0:0:1: [sdc] Device not ready: ASC=0x3a ASCQ=0x0
    end_request: I/O error, dev sdc, sector 804308
    Buffer I/O error on device sdc, logical block 201077
    usbcore: registered new interface driver usbserial
    usbserial: USB Serial support registered for generic
    usbcore: registered new interface driver usbserial_generic
    usbserial: USB Serial Driver core
    Here, /dev/sdb is my memory card and /dev/sdc is phone memory.
    When I run either mount /dev/sdb /mnt/phone or mount /dev/sdc /mnt/phone, it says "mount: No medium found".
    @Mr Green:
    Here is the link to phone specs page:
    http://www.motorola.com/motoinfo/produc … jectId=242
    OR
    http://www.gsmarena.com/motorola_zn5-2432.php
    @Square:
    Thanks, but mine's a GSM phone.

  • How to connect android phone via usb using mavericks?

    I am fairly new to Macs and want to transfer music files from my PowerBook to my LG Android phone via a USB connection.  Any suggestions on how to accomplish this?  Thanks in advance for any help.

    I do not have the equipment to try this setup first hand, however, it could be possible to set this up. It appears that the phone and Operating System has the means to print pre-installed. You will need a proper OTG cable also.
    Ensure that under Settings> Printing that the HP Plug in is installed and turn on. If you do not have it, it can be found in the PlayStore. HP Print Service Plugin<---
    After that, simply connecting the cable to both phone and printer should allow you the means of printing.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Maybe you are looking for

  • Shadows on a White Screen

    When I have a totally white window on my 30" cinema display and I move it across the desktop, I tend to notice some light shadows that quickly disappear. Do others have this with there monitor? I noticed it happens on my Dell flat screen at work as w

  • How do I reboot into mac mode from the windows 7 startup on mac

    Firstly please don't judge me coz I know I've screwed up and learned my lesson but I downloaded a windows 7 torrent file, burned that to disk, set a disc partition on my mac thought the bootcamp and then installed windows but now whenever I turn my m

  • Viewing many windows on one screen

    Hi, I would like to be able to view a few windows on one screen so I don't have to minimize & maximize etc when working with a few things. Someone set it up on my computer using hot corners but I didn't like those corners so I turned them off. Any ad

  • Additional title in Vendor Master

    Dear All, How can I add title in vendor master? Regards, Mahendra Gupta

  • Although I have an Adobe subscription, and Adobe export PDF (from 12/12), I cannot open my Adobe PDF

    Although I have been Adobe subscription, and export PDF from December 12 of 2012, I cannot open my PDF documents. When I attempt to do so, and Adobe screen pops up stating that I have to subscribe, even though Adobe recognizes by subscription from 12