How to connect MacBook Pro 17" Mountain Lion with HDMI port on TV, Panasonic TC-P55ST50

Any experience with cables for connecting MacBook Pro 17" Mountain Lion with HDMI port on TV, Panasonic TC-P55ST50 (or similar)?

It depend upon the model (age) of you MBP. If you have a Thunderbolt or minidisplay port, then you will need a minidisplay/HDMI adapter.
eshop.macsales.com/item/NewerTech/CBLMDPHDMI/
Or you can get an all in one:
http://www.amazon.com/Cable-Matters-Premium-DisplayPort-Thunderbolt/dp/B004CADYD O/ref=sr_1_3?s=electronics&ie=UTF8&qid=1361985588&sr=1-3&keywords=minidisplay+hd mi
If you have an older mac with a DVI port, you will need something like this:
http://www.amazon.com/DVI-HDMI-Cable-6ft-Male-Male/dp/B0002CZHN6
Note that audio is supported via HDMI for MBPs 2010 and later. Earlier ones require tapping the audio output port.
Ciao.

Similar Messages

Late 2011 MacBook Pro running Mountain Lion with app: "iMac EFI Firmware update"

I have an app on my MacBook Pro late 2011 model, by the name "iMac EFI Firmware update" that my computer says is useless... can I uninstall it using CleanMyMac without corrupting my OS Mountain Lion or simply dragging it to the garbage?

You can delete it. Just drag it to the Trash and this installer will be removed. As you have already installed this update, you don't need the installer anymore on the hard drive

How to connect Macbook pro to a projector with the Mini Display to VGA adapter?

When I connect them nothings happens, the display has a blue screenshot for a few seconds and then get back to the normal view of my desktop. It's the same if I digit "cmd+F2"... Please help me.

The default method for adding a second display is called Mirroring. It uses a lowest-common-denominator approach to choosing display resolution, and often guesses wrong.
System preferences > Displays > ( Arrange) and drag the superimposed representations of the two displays away from each other to invoke "Extended desktop" instead. Then you should be able to set the resolution for the projector to a more reasonable one, and your picture should appear.

HT1619 How do I disconnect an Apple remote from my MacBook Pro w/ Mountain Lion update?

My friend set up Apple TV while I was using my laptop in the same room and the remote is now connected to my laptop. I've looked at a bunch of different sites and forums trying to figure out how to disconnect it and it seems that with the new Mountain Lion operating system, there is no way to do this. PLEASE HELP it's driving me crazy because everytime he presses a buttom on the remote, it interferes with what I'm doing.

Sorry, but my late 2009 MacBook Pro running Mountain Lion continues to be be controlled by the ATV2 remote after disabling remotes in system preferences. Anyone else having the issue or has a solution?
Cheers!

I have a late 2011 model MacBook Pro running Mountain Lion. I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV? I used to run a cable from my mini display port to the HDMI input of a TV.

I have a late 2011 model MacBook Pro running Mountain Lion. I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV? I used to run a cable from my mini display port to the HDMI input of a TV. This feature seems to be lost in the Mountain Lion upgrade. Did Apple feel that once Mountain Lion came out that EVERYONE would have Apple TV? There are no settings in System Preferences/Display like there used to be...only for AirPlay Mirroring.

Running a cable to the HDMI port is still supported. (and still works on mine).
If the Arrangement tab in System Preferences > Displays isn't present then it doesn't recognize the physical connection. Double check all cables. If that doesn't work try a PRAM reset:
http://support.apple.com/kb/ht1379

HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

Hi,
I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
So please suggest proper direction to use it and provide link to install any driver.
Thanks
Tauheed Ahmad

Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and 3.0 knowledge. They handsUp that reason I posted my problem in this forum.
So is there any better solution to use any mediator between these USB version handling, Please let me know.
Thanks
Tauheed

Whenever i connect the hdmi cable to the tv and the power cord simultaneously on my MacBook Pro running Mountain Lion, the laptop overheats, i noticed in the activity monitor that Loginwindow was taking up to 80% of the cpu, any solutions?

Whenever i connect the hdmi cable to the tv and the power cord simultaneously on my MacBook Pro running Mountain Lion, the laptop overheats, i noticed in the activity monitor that Loginwindow was taking up to 80% of the cpu, any solutions?

Mac OS X: What is Safe Boot, Safe Mode?
Mac OS X: Starting up in Safe Mode
I have tried installing a disc to try and reinstall the operating system.
Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
If you did manage to reach the desktop after doing any of the above
my battery was dying after a few minutes so I was trying to kill the battery and recharge it to see if I couldn't get it back to a full charge.
Apple/About This Mac/More Info/Hardware/Power/Battery Information - copy and paste the information here. Do not include any serial numbers.
I noticed the computer running slow
How large is your hard drive and how much hard drive space do you have left?
Mac OS X (10.4.3)
Update to 10.4.11 using the combo update or Software Update along with all the other updates that goes along with it.

Is the Dell 3115CN compatible with a Macbook Pro running Mountain Lion? If so, how can I install the drivers and install the printer on my mac?

I hace a Macbook Pro running Mountain Lion OS.... I need to print from time to time but don't have a new printer to go with my new macbook. Would a 3115CN work with it or no? If so, how can I set it up? Setting up a printer on a mac is a bit different from doing so on a windows machine and I am new to the macworld.
All help would be greatly appreciated.

Yes. I'm running this printer from 10.6 through 10.9 and it's worked fine with all versions. Dell released updated drivers a while ago that make it much easier to administer this printer.

How to get yahoo mail in notification in macbook pro in mountain lion os

how to get yahoo mail in notification in macbook pro in mountain lion os??

Are you using the web interface? You must add your Yahoo! Mail account to mail.app to get notifications.

Recently updated iMac and macbook pro to mountain lion. Now mouse and track pad operate backwards i.e. scroll up and page scrolls down. how do you fix this?

recently updated iMac and macbook pro to mountain lion. Now mouse and track pad operate backwards i.e. scroll up and page scrolls down. how do you fix this?

System Preferences > Mouse -- deselect "Scroll direction: natural." Do the same for the trackpad > Scroll & Zoom preference.

After upgrading macbook pro from mountain lion to mavericks computer performance slowdown

after upgrading macbook pro from mountain lion to mavericks computer performance slowdown

Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

What is the best application to optimize my Macbook Pro running Mountain Lion???

What is the best application to optimize my Macbook Pro running Mountain Lion???

Kappy's Personal Suggestions About OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utility is: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption. Drive Genius provides additional tools not found in Disk Warrior for defragmentation of older drives, disk repair, disk scans, formatting, partitioning, disk copy, and benchmarking.
Four outstanding sources of information on Mac maintenance are:
1. OS X Maintenance - MacAttorney.
2. Mac maintenance Quick Assist
3. Maintaining Mac OS X
4. Mac Maintenance Guide
Periodic Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) See Mac OS X- About background maintenance tasks. If you are running Leopard or later these tasks are run automatically, so there is no need to use any third-party software to force running these tasks.
If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced after Tiger. (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
Defragmentation
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive except when trying to install Boot Camp on a fragmented drive. But you don't need to buy third-party software. All you need is a spare external hard drive and Carbon Copy Cloner.
Cheap and Easy Defragmentation
You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive. You will use Carbon Copy Cloner to create the backup and to restore it.
1. Get an empty external hard drive and clone your internal drive to the
       external one.
2. Boot from the external hard drive.
3. Erase the internal hard drive.
4. Restore the external clone to the internal hard drive.
Clone the internal drive to the external drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not depressed or is ghosted.
5. Click on the Clone button.
Destination means the external backup drive. Source means the internal startup drive.
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive and click on the upward pointing arrow button.
After startup do the following:
Erase internal hard drive
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your internal hard drive (this is the entry with the
       mfgr.'s ID and size) from the left side list. Note the SMART status of the
       drive in DU's status area. If it does not say "Verified" then the drive is
       failing or has failed and will need replacing. SMART info will not be
       reported on external drives. Otherwise, click on the Partition tab in the
       DU main window.
3. Under the Volume Scheme heading set the number of partitions from the
       drop down menu to one. Set the format type to Mac OS Extended
       (Journaled.) Click on the Options button, set the partition scheme to
       GUID then click on the OK button. Click on the Partition button and wait
       until the process has completed.
Restore the clone to the internal hard drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not selected or is ghosted.
5. Click on the Clone button.
Destination means the internal hard drive. Source means the external startup drive.
Note that the Source and Destination drives are swapped for this last procedure.
Malware Protection
As for malware protection there are few if any such animals affecting OS X. Starting with Lion Apple has included built-in malware protection that is automatically updated as necessary.
Helpful Links Regarding Malware Protection:
1. Mac Malware Guide.
2. Detecting and avoiding malware and spyware
3. Macintosh Virus Guide
For general anti-virus protection I recommend only using ClamXav, but it is not necessary if you are keeping your computer's operating system software up to date. You should avoid any other third-party software advertised as providing anti-malware/virus protection. They are not required and could cause the performance of your computer to drop.
Cache Clearing
I recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Corrupted cache files can cause slowness, kernel panics, and other issues. Although this is not a frequent nor a recurring problem, when it does happen there are tools such as those above to fix the problem.
For emergency cleaning install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (AppleJack works with Snow Leopard or earlier.)
Installing System Updates or Upgrades
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Backup and Restore
Having a backup and restore strategy is one of the most important things you can do to maintain your computer. Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner.
2. Deja Vu
3. SuperDuper!
4. Synk Pro
5. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance and backup and restore.
Always have a current backup before performing any system updates or upgrades.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space. Avoid installing utilities that rely on Haxies, SIMBL, or that alter the OS appearance, add features you will rarely if ever need, etc. The more extras you install the greater the probability of having problems. If you install software be sure you know how to uninstall it. Avoid installing multiple new software at the same time. Install one at a time and use it for a while to be sure it's compatible.
Additional suggestions will be found in:
1. Mac OS X speed FAQ
2. Speeding up Macs
3. Macintosh OS X Routine Maintenance
4. Essential Mac Maintenance: Get set up
5. Essential Mac Maintenance: Rev up your routines
6. Five Mac maintenance myths
7. How to Speed up Macs
8. Myths of required versus not required maintenance for Mac OS X
Referenced software can be found at CNet Downloads or MacUpdate.

Upgraded my macbook pro to mountain lion. But during windows installation, it refuses coz of FAT file system. Also is it possible to partition after windows installation???

I just upgraded my macbook pro to mountain lion. Now I want to install windows, but during installation using bootcamp, it says windows can't install on FAT partition. I couldn't change it to NTFS. Also how can I partition my hard disk after windows installation. Coz before windows installation, if I partition hard disk, it won't allow me to install windows saying startup disk can't be partitioned.......help would be appreciated.
Thanks

bkchoo wrote:
Now, I wish to upgrade from Mountain Lion 10.8.5 to latest version of OS X Yosemite, but I am in doubt and worry if after upgraded to Yosemite, can I still using my Windows XP where I installed now in Mountain Lion 10.8.5 BootCamp?
Yosemite does not allow a new installation of XP, but an existing XP installation is self-contained and will continue to work. Does your XP installation use a FAT partition? You may be better off using NTFS and then upgrading to Yosemite.
Will the Yosemite upgrade process delete my Windows XP partition or crash my current BootCamp? Can I still have an option to load OS X or Windows XP (press 'alt/option' key during boot up) after upgraded to Yosemite?
If you have made any re-sizing attempts to WXP partition Yosemite will cause problems, otherwise the Yosemite upgrade leaves XP untouched.
Are there any specific reasons to upgrade to Yosemite?

IPhoto update to 9.4.1 after updating MacBook Pro to Mountain Lion

Hello.
I updated my MacBook Pro to Mountain Lion and iPhoto to 9.4.1, but the Mac App Store still shows a "1 update available" notification, but when I open the App Store, next to iPhoto it says "Installed". How do I get rid of the "1 update available" notification ?
Thanks for your help,
Antonio

Addendum to my post above (I'm past the window to edit my original post). Here is a screen shot (cick image to enlarge/read) of the multiple iPhoto 9.4 updates installed yet the App Store still insists that my installed version needs updating. I'm completely befuddled on this one.
Message was edited by: Fox8

How to connect macbook pro to panasonic tv with hdmi cable

How to connect macbook pro to panasonic hd tv with hdmi cable

Hi m,
It depends which MPB you have and the inputs on the TV. The following assumes your TV has an HDMI input which will work with a computer.
This is if your MBP is from April 2010 or newer:
http://support.apple.com/kb/HT4241
First connect the adapter to the MBP and the HDMI cable from the adapter to the TV, then go to System Preferences > Sound > Output > select HDMI.
Or if your MBP is older than that and you have a Mini DisplayPort, you can use something like this: http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/
If it's older than that, for video you need a DVI or mini DVI to HDMI or whatever input your TV has. For audio, you need a 3.5mm stereo mini plug to RCA or optical (Toslink), depending on what audio input your TV has.

How to connect MacBook Pro 17" Mountain Lion with HDMI port on TV, Panasonic TC-P55ST50

Similar Messages

Maybe you are looking for