HOW TO CONNECT MG3100 TO ATT ROUTER

Have a MG3100 series printer.
Had it connected on old system.
Have not got it to connect to new ATT U system.

Hi ROJASE42!
So that the Community can help you better, we will need to know any error messages you're getting, and the Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x). Any other details you'd like to give will only help the Community better understand your issue! Thanks and have a great day!

Similar Messages

  • I have a new HP Photosmart Premium that does not connect to our ATT router we use for 2

    We just purchased a new HP Photosmart Premium to work on our ATT wireless router with two laptops.  It does not connect to our ATT wireless network with the error "No filtering"  FAIL indications.  Why?

    There could be several reasons for this.
    Let's try this: cycle power on the router, let it restart a couple of minutes then try it again.
    If that does not work, we may need to adjust some settings in the router.   ISP supplied routers are not the best.....
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How to connect a E1200 wireless router to a machine tool network for wireless communications

    Hello all, I am new to the forum, hope someone can help me out. I am wanting to connect my E1200 wireless router to a machine tool in our factory that has programmable controllers and is connected to the machine components via ethernet connections. This is so we can troubleshoot the machine without having a wired laptop. We have several ethernet switches on the machine and a range of IP addresses say from 192.16.1.1 through 192.16.1.150, and 192.16.17.1 through 192.16.17.150, all of the addresses are not used but random addresses in the range. I would like to be able to connect my E1200 to either one of the networks without having to make a change in the router setup. I can make it work on either network but when I switch my cable to the other network it has to be reconfigured. I am currently connecting my data cable to a ethernet port on the router and changing my router address from 192.168.1.1 to 192.16.1.1 and selecting a range of 150 so it will assign numbers as needed. This works great until I change to the other network and I have to change my router address to 192.16.17.1, I know this can be done on some routers because the technicians from the machine builder use them when working on the machines. thanks

    On the basic setup tab make the changes shown below:
    This basically make the router disappear off the existing networks and turns it into a wireless AP.
    Then when you set your laptop's wireless adapter to whatever IP network you want to connect to.
    If you need to connect to your router again change the laptop's adapter IP to something like 192.168.200.2
    Keep in mind nothing ever gets plugged into the Internet Port on the router.
    What I do with these manufacturing machine's is put them on the company network with static IP's. Then so operators can transfer programs and view drawings I place ELO touchscreens at each location. For the Laser cutter operators that do nesting they have a desktop workstation for the CAD software and put the nests on a network share or direct to the laser cutters.
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • How do  connect tv to my router

    how do i connet my tv to my router

    Can we please get a bit more information from you since you did not tell us.....
    1) How you are trying to connect the TV to the router....Ethernet cable?  Wireless?
    2) What the brand and model number the TV might be?
    3 What router you are asking about?
    Please remember that we cannot see your network. Things that are obvious to you there are totally unknown to us.
    We only know as much about your issue as you tell us.

  • TS1398 How to connect iPad to private router not connected to the internet?

    I have an iPad 2 running iOS6.1 that will not connect to my Asus RT-AC66R router when the router is not connected to the internet.  The message I get on my iPad is "The cable for ethernet is not plugged in".  This also happens with my iPod gen 5.
    I'm trying to control Philips Hue bulbs with their Zigbee bridge connected to the router, but I do not want a connection to the internet.  The Hue app works with an Android phone and an older iPhone 4 running an older iOS version without the router connected to the internet.  The newer iOS6 seems to want to have access to the internet, but having internet access should not be required for this application.
    If I do connect the router to the internet, the Hue app works on my iPad2 and it continues to work for a couple of minutes after I disconnect the internet cable. Then I get the message "The cable for ethernet is not plugged in" again. I'm doing this at work where I'm not supposed to connect the router to the work network cable, else it wouldn't be an issue.

    mrogers641 wrote:
    How can I install Mavericks on a Mac that is not connected to the internet?  Is there a way to copy OS 10.9 to a USB drive an then install it?
    Log in to another computer, family's or friend's, and download it to a USB drive, using YOUR OWN Apple ID and then install it onto your Mac. Preferably you could use someone else's WiFi connection to directly download and install on your Mac,
    Cheers
    Pete

  • How to connect deskjet 2510 to router usb

    I want to connect my deskjet ink advantage printer 2510 to the router usb so I can print from the laptop without physically
    connecting to the printer.  Network printing.   Thank you

    eksar wrote:
    I want to connect my deskjet ink advantage printer 2510 to the router usb so I can print from the laptop without physically
    connecting to the printer.  Network printing.   Thank you
    Unfortunately your printer is only USB and unless you use something a hp jetdirect print server modules you will not be able to hookup to the router and make it a network printer. Also that USB on the router is mainly for network storage devices not regular USB hookups unless they state otherwise. AFAIK
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • How to connect airport to wireless router?

    I have a router wireless Huawei B683 connected to WEB but I want to extend the net with a airport express?
    Can I connect in wireless mode the Airport Express?

    Neither Apple nor Huawei design their products work with each other for this purpose.
    As we already answered, the products are not compatible.

  • How to connect SPA122 to wireless router

    I apologize if this is in the wrong place as it is a decidedly newbie question but I can't find an answer anywhere here. I am trying to connect my SPA122 ATA to my new TP-Link TL-WDR3600 wireless router. This setup worked with my old router (NetGear WGR614) but I cannot seem to get it to work with the new router. I am connected to the Internet through a Huawei MT130U cable modem with nominal 28MBS bandwidth. I have been told that the throughput of the router in the SPA122 would restrict that so I had connected it to my old WLAN router in the DMZ. This worked fine before but not with new router.
    TP-Link TLWDR3600 N600 Dual Band Gigabit Router. DHCP range: 192.168.0.100-199 and I reserved 192.168.0.150 for the MAC address of the SPA122. I set 192.168.0.150 as the DMZ host IP and enabled it.
    SPA122: I set the Networking Service to Bridge. I have tried using both Automatic DHCP and Static IP. Neither seem to work.
    Static IP address: 192.168.0.150  Subnet Mask: 255.255.255.0  Default Gateway: 192.168.0.1 (discovered by IPCONFIG)
    Any help or assistance would be most gratefully received. Thank you.
    Fraser

    Sorry for the misplaced post and delayed move. I just had surgery and will be discharged tomorrow. Thank you for the direction to the appropriate forum Paolo.
    My router and Internet (cable modem) are working but my VOIP (SPA122) is not. I have heard that there is a firmware memory leak in the SPA122 and wonder if this is contributing to the problem. I have rebooted the SPA122 (as well as the router and modem) repeatedly to no avail.
    The SPA did work (with intermittent problems) with my old NetGear WGR614 modem but does not with my new TP-Link TL-WDR3600. I have not tried it since being admitted for surgery Sunday and will try again when I return tomorrow (Wednesday).
    I would be very grateful for any help or assistance.
    Thanks, Fraser

  • Airport Extreme with ATT Router for Open DNS use

    I'd like my whole home network to have a filter on it so all computers and hand devices are protected. I get my internet with an ATT router which I can not change the DNS servers. ATT says they can not be changed. But I have an airport extreme directly connected to the ATT router. The extreme supplies wi-fi to the house. I can not change the DNS settings in the extreme. They are grayed out. I'm assuming it has something to do with the connection to the ATT router. Does anyone know how I can put a DNS address in the extreme?
    Some of the settings on the extreme are:
    Internet Tab: connect using DHCP, DNS Servers "grayed out", Domain Name "grayed out"
    Network Tab: Router Mode (off (bridge mode))
    thanks!

    Does anyone know how I can put a DNS address in the extreme?
    Not sure what you mean that you cannot enter the DNS numbers on your AirPort Extreme configuration page.
    Open up AirPort Utility and select the Internet tab
    Look at the first DNS entry there. There should be a cursor at the beginning of the DNS Server Box. If not, click to set the insertion point at the beginning of the box.
    Simply start typing in the DNS server number that you want to use.....208.67.222.222...... and it will overwrite the grayed out values there.
    Do the same for the second DNS box....208.67.220.220.
    Click Update at the lower right and you are all set.

  • How to connect WRT54GX and WAP54G

    Hi,
    I am using WRT54GX router and WAP54G access point in same floor. Could you please let me know how to connect access point with router? Kindly provide setting.
    Thanks!
    Gaurav

    Hi, first connect one of your Pc to the router and log into the setup page of the router with http://192.168.1.1 . The username is blank and the password is admin. Under the wireless tab make a note of the ssid, wireless channel and under the wireless security page also make a note of the wep keys if you have provided any. Then click on the status tab and under the status tab you can click on the Local Network and note the Mac Address mentioned on this screen You can then connect the wap54g to the router and log into the setup page o the access point by http://192.168.1.245 . The username is blank and the password is admin. On the wireless screen you can change the ssid, the channel and the wep encryption accordingly.
    Then on the setup screen you can click on the AP Mode and select the mode as Wireless Repeater an punch the Mac Address and then click on save settings. You can then unplug the access point from the router in order to get it working wirelessly.

  • Simple way to connect AEBS to other router for n-profile

    Hi There,
    I have just sign up to local ISP who gave me a modem/router for their fast internet. Internet itself is fine in terms of speed; however their wireless profile from that router is b/g. I got AEBS and I want to connect it their router to get n-profile from AEBS.
    So question is how to connect AEBS for their router (Sagem)? I am newbie for this so I would be appreciated if someone will simply tell me to which ports cables are going to and what settings should I change in Sagem/AEBS, please.
    The ISP giving dynamic IP for me if that matter at all. Apparently I can change for static but I don’t really know what is more beneficial.
    Hope all that settings will stay the same once I will get Time capsule instead of AEBS.
    Thanks in Advance.

    Don't think you need to change any settings in the Sagem. Just hook your AEBS with ethernet cable into ethernet port on the Sagem and the WAN(circle) port on the AEBS. Then open up Airport Utility and let it set up your airport network. You will setup the N network there.

  • How to connect a time capsule with an ATT Elevate Hot Spot

    Hi,
    Need help connecting my time capsule to my ATT Elevate Hot Spot....since I have no ethernet connection.
    Thanks!

    Not sure how much we can help on this, but as a test, if you turn off the wireless on your MacBook and connect it to the router using an Ethernet cable, you should be able to log onto the Internet.
    If you can, you know the Ethernet connection is working, and it will be a simple matter to connect the Time Capsule to the router and get it set up.
    If you cannot get an Internet connection when you connect the Mac directly to the router, then more troubleshooting will be required.

  • How to connect New Airport Time Capsule to non Apple asdl router

    Guys,
    I have just purchased a new AirPort Time Capsule to back up the various macs in my house. I want to connect it to my wireless router which is a non apple product but the setup instructions are a little unclear to me.
    My current router has simply a phone line connector and the power source coming into it. Do I simply connect an ethernet cable from the Airport to the Router. And if so, do I use the single Ethernet WAN port or one of the three Ethernet LAN ports on the rear of the airport? I assume the other end of the cable goes into any of the Ethernet slots on the back of my router which are marked 'Ethernet', or would it go into the socket marked 'Broadband WAN'?
    Appreciate your help and if anyone is willing to speak on phone, I am very ahppy to call you in the next couple of hours! I am in the UK
    Best, Anthony

    thanks LaPastengue!
    Here is what ive got
    What ATT router do you have? Exact make and model please.
        gateway 2wire from at&t
    What TC do you have.. Latest AC tall one?? Or older one?? If older. .please tell us the model number. A1409 for example from the base mat.
         yes I have the latest airport time capsule 2TB
    Please tell us the full setup.. what is currently plugged into the main modem router??
         The Main modem route has an ethernet cord plugged in the other side of the cord is plugged into the phone      jack
    Do not plug the TC in first.. plug a single ethernet TC to the computer.. Hmm. so I need an additional ethenet cord to plug the TC into the computer? Leaving the router plugged in as is?
    Open the airport utility and change the TC to bridge mode.
    https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-23706673-32722 6/450-411/bridgev6AU.png
    Update the TC and then plug it into the ATT modem and plug it into your computer or use the wireless and then tell us what happens.

  • How to connect a router to Ethernet 2 on my G5 so I can share a VPN connection?

    Hi,
    I have my Mac Quad G5 connected to my CableModem/Router/WiFi(we'll call it Router#1) that my ISP gave me on ETHERNET 1.
    Now what I want to do, is connect a different Router/Wifi (we'll call it Router#2) to ETHERNET 2, like connect the WAN port of the router to the G5 Ethernet Port 2.
    - I want to do this, so I can broadcast via Wifi (a different SSID than Router#1) what I SHARE on that ethernet port 2 through this Router#2 I mention above.
    Specifically, I will go into Internet Sharing and select VPN to ETHERNET 2, so that I can output a VPN tunnel to the WAN of Router#2 and have it broadcast access via NAT to that tunnel, so my SmartTV, and other wireless devices have an access point to connect into the tunnel.
    Can this be done? And how do you do it?

    I do not know about VPN setup.  It's an advanced configuration.
    A picture of this configuration would be help.  Draw on paper & scan.  Use a graphics program.  Click on camera to imbed png. image.
    I added a second wifi router because my free verizon router support only WEP which is worthless.
    Caused all sorts of confusion when I had my iMac g3 connected to verizon and my laptop connected to my 2nd router.  I could not share files between my two machines.  I had to connect both machines to router 2. I had to reconfigure the firewall on my iMac.
    I have my Mac Quad G5 connected to my CableModem/Router/WiFi(we'll call it Router#1) that my ISP gave me on ETHERNET 1.
    What is Ethernet 1?  Is it the name of your 1st wireless network?  Is it you isp's ethernet?  Is it port 1 on your router?
    Now what I want to do, is connect a different Router/Wifi (we'll call it Router#2)
    I get this.
    to ETHERNET 2.
    What is Ethernet 2?  Is it port two on router 1?
    What is router2 connected too?
    I assume that router 2 is connected to port 2 on router 1.
    Specifically, I will go into Internet Sharing and select VPN to ETHERNET 2, so that I can output a VPN tunnel to the WAN of Router#2
    What is this about?  This implies that router 2 is connected to your g5.
    Robert

  • How does HP 8500 connect to Netgear WNR3500 router?

    I currently have an old HP printer connected (USB) to an Apple Airport for a one printer for our house.  Can the 8500 connect to the Netgear router, directly to a cable modem, without a computer (like the Airport can)....or not?

    Yes, you can.  Depending on the model of 8500 (there are three), it can connect either with a wired (Ethernet) connection (all of them) or the two higher end ones can connect wirelessly.  
    You do not want to connect a printer to a router with USB unless it is only a printer (no scan function).  USB ports on routers only support printing, not scanning.  Ethernet or wireless support print and scan for all computers on the router.  It does not matter how the printer or computers are connected to the router, they can all communicate with each other.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for

  • Which would you choose MBP for FCP7

    Ok here is my question.  I am looking to invest in a refurbished 15in MBP.  I cannot afford a new one at thist time.  Below is what I am planning to use it for and I will give you the two models I am looking at, I would really be thankful if any of y

  • Need to see changes to user security

    I have a requirement to run a report weekly for all changes done on all users. So, if users had a new responsibility added or removed we would like to see that on a report weekly. We would like to also capture who made the change also with a date sta

  • Odd characters showing up after publishing

    Everything looks as it should when I'm in iWeb, then i click publish and view the site. There are the A's with hats everywhere and now euro and tm symbols where " 's " should be. I've viewed the source code and I can see where these figures are showi

  • How to separate XML element content

    Hi All, How can i separate XML element content in to two strings, where each string will be copied into new variables. For ex: The input I get is <XmLElement>C:/documents/sharedFiles/apple.pdf</XMLElement> now I want to break the content into two par

  • HT204266 can i buy music from a different country when i live in the US?

    i wanted to buy one of Cheryl Coles's songs and the price shows up in euros because obviously she lives in Europe. can i buy this song with some gift card money? thanks -mariahfromri