How to connect Motorola phone to Arch.?

Hi.!
I have Motozine ZN5 which I want to connect with my Arch box via USB so that I can transfer files,SMS etc. between the two.I tried out Wammu but it couldn't detect my phone.I can see my phone listed when I run lsusb command.How do I go about from here.?

Thanks for quick responses.
I tried connecting as a mass storage device.Here is the relevant part of dmesg output:
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 2:0:0:0: Direct-Access Motorola MSnc. 0101 PQ: 0 ANSI: 2
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 2:0:0:1: Direct-Access Motorola MSnc. 0101 PQ: 0 ANSI: 2
sd 2:0:0:1: [sdc] Attached SCSI removable disk
sd 2:0:0:1: Attached scsi generic sg3 type 0
usb-storage: device scan complete
sd 2:0:0:1: [sdc] 804324 512-byte hardware sectors (412 MB)
sd 2:0:0:1: [sdc] Write Protect is off
sd 2:0:0:1: [sdc] Mode Sense: 03 00 00 00
sd 2:0:0:1: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 3920639 512-byte hardware sectors (2007 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:1: [sdc] 804324 512-byte hardware sectors (412 MB)
sd 2:0:0:1: [sdc] Write Protect is off
sd 2:0:0:1: [sdc] Mode Sense: 03 00 00 00
sd 2:0:0:1: [sdc] Assuming drive cache: write through
sdc:
sd 2:0:0:0: [sdb] 3920639 512-byte hardware sectors (2007 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb:
usb 1-5: reset high speed USB device using ehci_hcd and address 2
sd 2:0:0:0: [sdb] Device not ready: Sense Key : 0x2 [current]
sd 2:0:0:0: [sdb] Device not ready: ASC=0x3a ASCQ=0x0
end_request: I/O error, dev sdb, sector 3920384
Buffer I/O error on device sdb, logical block 3920384
sd 2:0:0:0: [sdb] Device not ready: Sense Key : 0x2 [current]
sd 2:0:0:0: [sdb] Device not ready: ASC=0x3a ASCQ=0x0
end_request: I/O error, dev sdb, sector 3920385
Buffer I/O error on device sdb, logical block 3920385
Buffer I/O error on device sdb, logical block 3920386
Buffer I/O error on device sdb, logical block 3920387
Buffer I/O error on device sdb, logical block 3920388
Buffer I/O error on device sdb, logical block 3920389
Buffer I/O error on device sdb, logical block 3920390
Buffer I/O error on device sdb, logical block 3920391
sd 2:0:0:1: [sdc] Device not ready: Sense Key : 0x2 [current]
sd 2:0:0:1: [sdc] Device not ready: ASC=0x3a ASCQ=0x0
end_request: I/O error, dev sdc, sector 804308
Buffer I/O error on device sdc, logical block 201077
usbcore: registered new interface driver usbserial
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
Here, /dev/sdb is my memory card and /dev/sdc is phone memory.
When I run either mount /dev/sdb /mnt/phone or mount /dev/sdc /mnt/phone, it says "mount: No medium found".
@Mr Green:
Here is the link to phone specs page:
http://www.motorola.com/motoinfo/produc … jectId=242
OR
http://www.gsmarena.com/motorola_zn5-2432.php
@Square:
Thanks, but mine's a GSM phone.

Similar Messages

  • How to connect my phone to macbook air for the call feature ?

    Hi, my macbook air, 2014 just upgraded to OS X Yosemite. My iPhone is the 5 version, iOS 8.02. I don't know how to connect my phone to the mac for the call feature. What should I do first?
    Thanks very much!

    Check these settings:
    On the phone:
    On your Mac (FaceTime Preferences):
    Your AppleIDs for both need to be identical, and both using the same WiFi network.

  • Dear sir how to connect i phone 4 to pc

    dear sir how to connect i phone 4 to pc

    Stop being so impatient.
    We are all users like yourself, Apple does not read or respond here.
    Plug the device into the computer and it should automatically be detected.
    iTunes can be downloaded by clicking on the iTunes link at the top of these forums.

  • HT201269 how to connect I-phone 5S to a computer to transfer audio and data files

    how to connect I-phone 5S to a computer to transfer audio and data files

    You asked the same question 20 minutes ago and I answered it then
    https://discussions.apple.com/thread/6029247

  • How to connect LG phone camera to MPB?

    how to connect LG phone camera to MPB?

    Have you tried something like http://www.macupdate.com/app/mac/33442/fonesync-for-lg-phones?
    Message was edited by: EZ Jim
    Mac OSX 10.10.1

  • HT201269 How to connect I phone to PC ?

    How to connect I phone to PC ?

    You asked the same question 20 minutes ago and I answered it then
    https://discussions.apple.com/thread/6029247

  • How to connect android phone with iPad mini

    How to connect android with iPad

    What is it you want to do by connecting?
    Tethering an iPad to an Android Cell Phone
    http://everydaylife.globalpost.com/tethering-ipad-android-cell-phone-33675.html
     Cheers, Tom

  • HT2702 how to connect a phone to bluetooth

    I am trying to connect my phone to my mac. It says that it is paired, but it is not connected. What is the difference, and how do i fix that?

    For what purpose are you trying to connect them?
    The only supported Bluetooth function between a Mac and iPhone is internet tethering.

  • How to send Motorola Phone Contacts to Mac

    Can someone tell me how to send my phone contacts to my Address book via BT?
    Also, as a bonus question, does anyone know how to send mp3 songs to my Motorola V360? (It's essentiall the same phone as the RAZR)
    Thanks for your thoughts.

    With iSync I synchronize my phone book with the address book. At first you have to configure the V3 RAZR that it is 'known' in the Mac and also the Mac as a known device in the MOTO. And then you have to agree to any action such as a file transfer.
    Pictures and mp3 files are sent to the MOTO with a click at the BT symbol above in the right corner near the speaker icon choosing the 'Send File ...' submenue.

  • How to connect my phone with the cloud

    How to connect my iphone to the cloud so I can download Itunes

    Do you have an Apple ID, and are you signed in, go into your settings>iCloud to check.  You shouldn't need to download iTunes because that app is on your iPhone, could you give me more information of what you are trying to download. 

  • How to connect i phone to i pad?

    How do I connect my i phone to my i pad?

    What are you trying to achieve...
    Ipad User Guide
    iPhone User Guide

  • How to connect android phone via usb using mavericks?

    I am fairly new to Macs and want to transfer music files from my PowerBook to my LG Android phone via a USB connection.  Any suggestions on how to accomplish this?  Thanks in advance for any help.

    I do not have the equipment to try this setup first hand, however, it could be possible to set this up. It appears that the phone and Operating System has the means to print pre-installed. You will need a proper OTG cable also.
    Ensure that under Settings> Printing that the HP Plug in is installed and turn on. If you do not have it, it can be found in the PlayStore. HP Print Service Plugin<---
    After that, simply connecting the cable to both phone and printer should allow you the means of printing.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • How to connect i phone 6 to mac pro

    how i can connect my iPhone 6 to mac pro through bluetooth

    connect iphone to computer and open itunes and sync

  • How to connect i phone printer

    I CHANGED MY INTERNET PROVIDER BOX AND RE SET MY PRINTER TO WIRELESS SUCCESSFULLY...HOWEVER IMY I PHONE NO LONGER CAN FIND THE PRINTER??? NO PROBLEM BEFORE THIS...I COULD PRINT FROM MY PHONE WITH NO PROBLEM

    Hi,
    Are you using the airprint function of the iPhone or a print app like HP ePrint? It might be worth downloading the HP eprint app and trying to print using the app.
    I know that you've laready tried this but restart the iPhone again to see if it re-establishes a connection.  Once the phone and printer are on the same wifi network, you should be able to see the printer via airprint and any print apps.
    Alternatively, you can use the wireless direct funtion of your printer by turining on the wireless button on the front of the printer. This allows the printer generate it's own wifi singal that you can connect to through any wireless device. To find the wireless password, simply hold down the wireless direct button for more than 3 secs and it will print the password on plain paper (make sure paper is loaded).
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • How to connect smart phone to eprint

    How do I connect and print from my android phone

    You can actually access any supported file that is saved on your device from within the home and biz app itself. Simply go to photos or documents when the app opens. If it is a photo simply browse through the photos until you see the one you want to print out. If it is a document filetype you are looking for go to files after choosing documents, and this will show all supported files on the device without having to use the share function.
    The app can also print over the local network without registering the app, and can print to most legacy printers that are networked but do not posess eprint functionality. 
    If you have any issues getting this set up or using the app, post back and ill see if i can help you out.
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

Maybe you are looking for

  • Acrobat X defaults to imperial

    Hi I run Windows 7 Pro and have Acrobat X installed. Everytime I set the preferences to millimeters under "page and ruler units". It defaults back to inches after closing and re-opening Acrobat. Can anyone tell me how to keep these preferences? Also,

  • How to embed a screenshot into a topic post/topic reply.

    Hi all, I wasn't sure which forum to post my question in, so since all my Discussions stuff opens in a browser window, I thought it might as well be in the Safari forum. My query is two-fold: 1. How do I embed a screenshot into a reply so that the sc

  • IDOC Status message

    HI I have to pick IDOC status message in my report program.  For this I am referring the table EDIDS. My doubt is some times the IDOC status message is storing in the field ‘STATXT’ and some times the idoc status message is storing in the fields STAP

  • 3rd party application sync failures -- BES policy?

    I have a BB curve (8310, ATT v4.2.2.170) which is synch'd via BES to corporat email/etall.   I have the BB desktop manager installed on a PC.  The BBDM can: install & remove applications, add/remove multimedia (songs, photos), access the storage card

  • Update: 1.0.7.3312 Just downloaded

    Checked for software update this morning and i got a hit to download 3312.  Downloaded it, but havent found anything new yet.  Let me know if anyone else has it.