How to connect my  AirPort Express to the DSL

Hi, I bought my AirPort in Finland and go with it to home. In home I have DSL connection. When I try to connect it to the internet, it says that my internet modem not connected or broken, but with my first router it works. Help me please. Thanks for reading.

Hi Barry.
Yes, the dsl line has it's own modem. I am trying to bridge the AE so that the iMac can still connect via ethernet cable and the wireless will be available for a kindle, iPhone, etc.
I set up an airport base station with Comcast at my house with no issues at all, so I'm thinking there is something about the dsl service that I am missing?
Thanks for the info.
Chris

Similar Messages

  • How do I connect my airport Express to the internet connection of my Macbook Pro without an ethernet cable?

    I would like to use my Airport Express (802.11n) to provide audio in another room for a pair of powered speakers, however the iTunes remote software for Android requires (for some dumb reason) an internet connection so I can't control iTunes
    So my computer is connected to a cabelmodem via ethernet and the Express has established a network connection with the computer
    How do i give the Airport internet access without an ethernet cable?

    To share your Internet connection from your laptop, select 'Sharing' in 'System Preferences' and enable 'Internet Sharing'.
    http://support.apple.com/kb/PH13855
    You will need to set a WEP key. You may need to root the system do some things at the command line. I recommend against that.
    Laptops don't work well as routers but it is possible.
    Hook up the AirPort express to the laptop using an Ethernet cable and configure with the AirPort utility as if you are setting up a print server or base station. The Android should see the AirPort Express after that.
    http://support.apple.com/kb/ht4587
    https://discussions.apple.com/thread/2312443
    This might work better if you used the AirPort Express as a base station instead of trying to use the laptop as a base station. Then your Android would have Internet access.

  • Conflicts??? If connect ATV & Airport Express in the same network?

    Since I installed AirPort Express 2 today, I couldn't use Iphone4s/ipad to airplay / mirror onto my Apple TV any more (only shows AirPort Base device).
    Do they conflict with each other in the same network?
    Anyone knows how to fix?
    Thanks a lot!!
    William

    I must be missing something here. WDS is rather old and out-dated technology.
    What other router is he using besides the 2n'd gen?

  • Connecting my AirPort Express to the internet

    Do I need to connect my incomming internetcable to the ethernet LAN or ethernet WAN port on my AirportExpress ( latest model ) ?

    Eric Hardies wrote:
    But untill know I used my LAN for my incomming internetcable and it also worked ? devices.
    That's the sort of setup which can work partially, but it's liable to cause problems. The Airport allocates IP numbers individually to each device connected to the LAN parts or by wireless so that their connections to the internet are kept separate.

  • How to connect to airport express without needing internet (for wifi remote)

    I am hooking up the Mackie DL 806 mixing console. my airport only works if i first have a internet connection. after I disconnect the internet it still works. I need it to work no matter what in a non internet environment  

    nicandmac wrote:
    I am hooking up the Mackie DL 806 mixing console. my airport only works if i first have a internet connection. after I disconnect the internet it still works. I need it to work no matter what in a non internet environment
    I am trying to understand this.. it sounds like you have it setup in bridge mode.. so it must get an IP from the main router to begin working.
    The Airport can work with or without internet.. but it needs to be in router mode to pass IP addresses.. and it will give errors which you must ignore.
    It is possible also to setup in static IP mode.. but you will still need to ignore errors.
    However to really help I need the whole setup.. I need to know if you are using the wireless in a secondary IP network from internet which is also running.. and if so what IP address ranges are being used.
    In other words tell me the entire setup.. what is the main router.. ?? What are the clients? How are they going to connect to the express when there is no internet??

  • URGENT Macbook Pro not connecting to Airport Express!!

    Ok So The network is there and my room mates macbook can connect to it.. Whenever I try to and it asks for a password and i try to type it in it just makes the ok button unclickable and i tried doing it through settings and comes up invalid password whn that is te password he uses =/ what up??

    qamera wrote:
    my Macbook Pro cannot connect to our wifi connection via Airport Express, though the connection is visible in the Airport drop-down and it shows full signal strength.
    You might try resetting your connection settings using the steps listed in this message:
    http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
    They're not guaranteed to solve the problem, but they'll only take you a minute or so to try.

  • MacBook Pro not connecting to Airport Express, iPad connects fine

    Hi. Suddenly my Macbook Pro cannot connected to our wifi connection via Airport Express, though the connection is visible in the Airport drop-down and it shows full signal strength. My iPad connects fine.

    qamera wrote:
    my Macbook Pro cannot connect to our wifi connection via Airport Express, though the connection is visible in the Airport drop-down and it shows full signal strength.
    You might try resetting your connection settings using the steps listed in this message:
    http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
    They're not guaranteed to solve the problem, but they'll only take you a minute or so to try.

  • Will plugging an ethernet cable from a powerline adapter into my Airport Express improve the signal strength that it re-sends as WiFi?

    I have a Airport Express (older style that plugs into the power socket) up one end of the house, which gets the signal from an AirPort Extreme at the front of the house.  It works ok for general internet and email, but the signal at the Airport Express end is not really strong enough for my Apple TV.  So today I bought an Edimax Powerline Adapter.  Connected one end to the AirPort Extreme and the other end to the Apple TV and Apple TV now works great!  So I was thinking, if I connected my Airport Express to the Powerline Adapter with an ethernet cable, would that improve the strength of the signal that the Airport Express would re-send out for WiFi.  But all that happens is that neither the AirPort Extreme or the Airport Express now seem to broadcast any WiFi signal.  Is it possible to do this?

    Yes, but you need to change the mode of the Express from wireless extend to create a wireless network and the routing part to bridge. Otherwise it will indeed mess up.

  • Connecting via AirPort Express: Performance Help Needed.

    Hello,
    I'm grateful for ideas, instruction, pointers to threads I may have missed re: improving performance/determining the cause of poor performance when connecting via AirPort Express.
    The deal: Up to 6 devices are connected to our AirPort Express. Only three of these are ever used simultaneously, though all remain "on," in either sleep or hybernate mode. Performance across the network is terribly uneven. Current data rate stats (a snapshot by way of the AirPort utility, in order of distance from the router):
    iMac: 130 Mb/s
    Printer: 54 Mb/s
    Macbook Pro: 144 Mb/s
    iPhone: currently "off"
    PC (Connected via Belkin USB-type Wireless Adapter): 2 Mb/s
    iPad: 39 Mb/s
    Note: the Macbook Pro is often located in a room farthest from the hub, some 120 feet away and with partial direct line of site. Still, its performance is unimpeded.
    At first glance, logic would dictate the worst problem is on the PC and caused by the Belkin adapter. But I've swaped that out for different USB solutions. Performace is seldom improved.
    Wondering if:
    a) The PC problem is in the data transfer rate of the PC bus. (Foregive me if I'm using "bus" incorrectly here. I'm guessing you'll know what I mean.) Or is it the nature of the USB adapters?
    b) Please also note that the Printer, which sits close to the router, often has a drop in data rate, sometimes to the single digits.
    Again, I'm grateful for ideas, instruction, or pointers. Also for wisdom on "extending" the network, perhaps by adding another AirPort device. I'm rather clueless about such stuff.
    Thanks in advance-  Best for the weekend-

    Thanks,
    I'm pretty sure the card is seated properly (it works most of the time after all). I couldn't get it to work when I installed it because it wasn't seated properly, I pushed it in as far as it could possibly go and it has worked since (except after extended periods of use). The Airport express is three feet from the eMac with only a couple of bits of wood between them. The connection does not go down at times which I can link with the use of any particular appliances (When the eMac stops working, the iBook is always fine, even in a similar position). It is the apparently time-dependent aspect that I can't figure out (I only notice it on those, fairly infrequent, occasions when I am online for a few hours at a time). The eMac discussion group is a good tip. Ta.

  • How can I connect my Apple TV and Airport Express to the rest of the network for the least lag?

    Hey guys,
    I have an Airport network here in the office.  All new Airport Extremes.  The internet comes into one, which then connects to our switches, which then connects to other Airport Extremes over ethernet.  Everything is setup to create its own network with the same SSID, and only the leader is the DHCP server.
    I recently added an Apple TV to the network, only it was too laggy for video chat.  I bought an Airport Express (for the audio), and ran ethernet to connect it to the network and the Apple TV, but things were still slow.
    Now, I set the Airport Express up as a DHCP server (with NAT) itself, with a separate SSID, and it's working great.  The only problem is that people would rather not have to switch wifi networks.  Is there any way around this?  BTW, the AirEx is complaining about Double NAT, which I understand is happening, but it's still working fine... it's really just the having to switch networks that's a problem for us.
    Thanks!

    Hi - as you probably know, double NAT is not recommended - you might have problems with some websites and updating - but if it is working that is great - as far as the Wi-Fi issue is concerned, you should still be able to create a wireless network with the same name an password as the rest of your network so no one has to switch.

  • How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

    How to connect old aiport express to my new Airport Extreme?
    I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
    I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
    I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
    I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
    My Ipad says "base station e5713b cannot be configured."
    I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
    My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
    Sigve

    Hi
    Thanks for Swift reply.
    Yep - I in fact have two A1088 and one A1264
    I actually bought the new router because the Jensen
    router always lost connection to the Airport Express after some hours or days. I
    always needed to restart my Jensen to play music and that was driving my wife
    mad. The hope was that the Extreme should fix this. Both A1088 have been set up
    to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
    Are the A1088 now useless?
    The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
    Please advise
    Regards
    Sigve

  • I cannot print from my iPad using airport express. My printer is not AirPrint compatible but is connected to airport express thru USB port. My laptop can print with no problem thru the express unit. My lap top is no a mac.

    Good day, my iPad does not seem to pick up my printer. My printer is not AirPrint compatible but is connected to my airport express thru the USB port. My laptop which is windows type connects to the printer via airport express thru bonjour and this work well. My iPad does not pick up my printer thru the airport express. I have read about different software that you can download but this seems to be only if you are using a mac. I know my express is working fine as I can use airplay thru my iPad. Any ideas? I do not want to go to the expense of changing my printer, when there was no mention in the express details that your printer had to be AirPrint compatible or indeed wireless.

    See this article to learn how to print from an iPad to your USB printer when you have a PC.  The PC will need to be running when you want to print from the iPad.
    Print from your iPad with PrintCentral | How To - CNET

  • Is there a way I can connect my airport express to be able to airplay the sound from my apple tv?

    Is there a way I can connect my airport express to ba able to air play to my speakers the audio from apple tv?

    GEESAR wrote:
    hi there
    is there anyway i can use the unlimited data i have from my mobile network provider (o2)  on this i pod touch 4 generation the latest model  NO.
    and does the sim from my mobile network o2 be used in the ipod touch4 to use the unlimited minuites i have from my mobile network provider  NO
    if not then how do i use the unlimited data ive been given through my mobile network provider please tell me most kindly  Purchase a mobile WiFi hotspot (Sometimes referred to as a MyFi), or have that service added to your cell phone.
       geeeeesar also how does this ipod touch4  pick up the  wifi free of charge is this possible or do you have to pay for limited data to access internet Your iPod can connect to any unsecured WiFi network that you are currently within range of.  These networks can be found at your local library, some city/county government buildings, doctor's offices, Denny's, IHOP, Starbuck's, Home Depot, Lowes, Best Buy, and other merchants.  Your iPod can connect to any secured WiFi network that you are within range of and that you have the password for. 
    thanks  can i pod touch 4 generation download movies too  please help thank u very much....  Yes.  If your iPod has a WiFi connection and you have an account with a service like NetFlix....

  • How can I print from my IPAD3 to a printer connected to Airport Express?

    How can I print from my IPAD3 to a printer connected to Airport Express? I have a HP printer and I can print from all my Windows PC and iMAC in the house. How can I print from my IPaD?

    You cannot.
    The USB port on the AirPort Express allow sharing a printer with Windows and Mac OS X, not with iOS:
    "Wireless printing over USB requires a compatible printer and OS X v10.2.7 or later, Windows XP, Windows Vista, or Windows 7":
    http://www.apple.com/airportexpress/#wireless-printing
    "AirPrint-enabled printers  connected using Bluetooth or shared through a USB port of a Mac, PC, AirPort Base Station, or Time Capsule are not supported":
    http://support.apple.com/kb/ht4356
    The HP ePrint app also does not provide such functionality:
    Can I print from the HP ePrint mobile app using USB or Bluetooth?
    No. You can only print directly to supported HP printers on a local wireless network.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01923321&lc=en&cc=us&dlc=en &product=5199463#N1176
    Shlomi

  • Connect to Airport Express and Wireless Router (Linksys) at the same time?

    I have a laptop that connects to a Linksys wireless G (WRT54G) router. I just got an Airport Express to play iTunes wirelessly over my stereo. Is there a way to connect to both the Linksys router and the Airport at the same time - i.e., connect to the internet as I was over the wireless router AND send music wirelessly from my laptop to my stereo using the Airport Express at the same time?
    Dell Laptop   Windows XP  

    Why yes, yes you can.
    http://docs.info.apple.com/article.html?artnum=302153
    This link shows you how to do it.
    Hope this helps.
    Toshiba Satelite A-10   Windows XP  

Maybe you are looking for

  • No print button on pdf

    I have no print button option in my pdf files only a save or cancel option.  How can I fix?

  • Is it possible to have different page sizes in one document?

    Hello everyone, I have never seen different page sizes in one document,but to make sure of this can someone confirm this? Thanks, Mor

  • Warnings when I downconvert from LV8.6 to LV8.0

    I tried to downconvert some VIs from LV8.6 to LV8.0. For this VI, after "save to previous version", I received those messages:     The object "Multiply" does not support output configuration in the previous version.     The object "Multiply" does not

  • Installing an old version of Logic on a new Macbook Pro

    I just purchased a Macbook Pro 13" non-retina and would like to know if (and how) I can install an old version of Logic Pro, such as Logic Pro 9 rather than the latest version, which is Logic Pro X.

  • Client ejb 2.0 to a 1.0 sessionbean

    For a migration situation i need to know whether it is possible for a ejb 2.0 client to connect to a 1.0 stateless sessionbean. Is it necessary to do some extra programming or extra deployment measures? regards, Peterson