How to connect my copy/fax machine?

how to connect my copy/fax machine?

Did you follow the instructions that came with the unit? At what step exactly did you have a problem at?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

How to connect the two virtual machine .

I installed VM workstation and created two virtual machine .Please suggest me how to connect them internally each other though vm network editor.I want create RAC Setup for practice.

NAT is the default adapter type in VirtualBox, which will work in almost any configuration and networking environment. Using the NAT adapter, the host system will establish connections on behalf of the guest OS. NAT requires that the corresponding VM guest adapter uses DHCP and cannot be used to provide any services unless you configure port forwarding (>1024) at the VirtualBox VM NAT adapter.
Bridged networking is the most transparent adapter type, but requires a physical network adapter on the host OS, which is limited depending on the host system and hardware, e.g. wireless. It also requires that the user understands network and routing restrictions of the host system in case of using the interface to communicate between the host and VM. A combination of host-only and NAT may sometimes be necessary to allow the VM to connect to the internet and allow the host to communicate with the VM guest OS.
Btw, the host-only adapter IP actually works on behalf of the host OS and can be used to allow the VM to access the host system. So if Internet is not required, the NAT or bridged adapter are not required. I'm not sure if many people realize that, since it's not really mentioned in the documentation. So if you use the host-only adapter, simply use the host-only IP instead of the host system real IP to connect the VM to the host OS.
I also switched to VirtualBox a couple of years ago, mainly because it provides more VM hardware options, is free and because of the ability to manage multiple virtual machines and group them together. I have about 70 virtual machines for testing and evaluating configured on my home computer. I also like the option in VirtualBox to clone a VM based on a Snapshot.
VMware provides a Virtual Network Editor in VMware Workstation (KB 1018697), which allows to customize any of the existing virtual network adapter or add new ones. The available technologies under any Type 2 hypervisor are very similar between different products:
http://www.vmware.com/support/ws45/doc/network_configure_ws.html

How i connect to my localhost machine to other database machine for sending

hi,
in our organization lan is there. how should i pass the jdbc connection
commands through java program to get the data from database from my system to other database system. here in my system there is no database. please provide the code for that.
import java.sql.*;
public class JDBCTest {
     private static final String DRIVER_NAME="com.ibm.db2.jcc.DB2Driver";
     private static final String DB_URL="jdbc:db2://Krishna:50000/KCC";
     private static final String USERNAME="db2admin";
     private static final String PASSWORD="admin123";
     private static final String QUERY="select * from KCC.KCC_REGISTRATION";
     public static void main(String[] args) throws Exception {
          Class.forName(DRIVER_NAME);
Connection conn = DriverManager.getConnection(DB_URL, USERNAME, PASSWORD);
Statement stmt = conn.createStatement();
ResultSet rslt = stmt.executeQuery(QUERY);
          while(rslt.next()){
               System.out.println(rslt.getString(4));
               System.out.println(rslt.getString(5));
rslt.close();
stmt.close();
conn.close();
System.out.println("Success! Connected to database.");
} this is i have written code. here krishna is my system. we r using db2 data base . it is there in other machine. how should i pass the database connections from local system to database system ( i am accessing the data by dy directly using db URL (jdbc:db2://kcc-db:50000/KCC)). but i don't want to like that. first i want to connect to my localhost then i want to connect to db machine.
please provide the code.

I can't help here, but perhaps this FAQ will - http://pondini.org/TM/AEQ2.html.
Clinton

How to connect to windows desktop machine

HOW DO I CONNECT MY 27" LED CINEMA TO A WINDOWS DESKTOP CPU

It can be done. You need to purchase a $100 converter.
http://www.amazon.com/gp/product/B003LGOWNQ/ref=s9_simh_gw_p23_d1_i1?pf_rd_m=ATV PDKIKX0DER&pf_rd_s=center-2&pf_rd_r=0T16SWEYJPTEATR3Q0M2&pf_rd_t=101&pf_rd_p=470 938631&pf_rd_i=507846
Warning - you won't get the full resolution on the monitor but it will work.

Moved User to new account. How to connect to old Time Machine backup.

Hello. I've just upgraded my wife's macbook pro to Mavericks. There was an issue with the install and we couldn't launch programs. I noticed that while logged in as Guest everything worked, so after many other futile attempts I created a new user and moved all her docs, etc. to the new user. I've renamed her old account and changed her new one to her previous name. All appears to work and everyone is happy. Except Time Machine. She now has a bcakup for an account she no longer uses and no backup for the account she does. Is there a way to connect the new account to the old backup so as to retain all the historical data?
Thanks in advance,
Mike

Time Machine backs up the whole computer, not just one account, so unless some hardware was changed or you erased the internal hard drive, I think Time Machine should continue to work. What are you seeing that indicates it's not backing up?
If it's indeed not working, see Pondini's excellent website for everything having to do with Time Machine: http://pondini.org/TM/FAQ.html
One page that might be particularly applicable to your situation is: http://pondini.org/TM/19.html

FAX machine with Manual function & option to connect PC for Send and receive

Nearly every MFD out there has these capabilities. I know the Ricoh, Konicaminolta, and the Kyocera can do this. The larger machines the fax needs to be installed as an option. Once installed you have walk up fax, scan to PC, Scan to e-mail, Fax forwarding to PC, or e-mail and if the driver is installed you can fax from your PC through the copier.

Hi to the Community
We have a requirement of FAX machine which should fulfill
our below requirements
Manual mode for sending and receiving Fax as Traditional
Second option required is it can be connected to PC so that
fax can be sent and receive directly from computer as well
I know to set up windows fax option to fulfill the second
requirement, but we need both options
If anyone knows a specific model, kindly let me know
This topic first appeared in the Spiceworks Community

How to connect a home Ethernet network and Time Machine?

My home is wired for Ethernet, but I cannot figure out how to make it active.
Currently I have my cable modem connected to a Time Machine. Then, the Time Machine is connected to the Ethernet lines that run through my house. If I try to connect my laptop to one of the Ethernet jacks in the house, it does not work. I can however connect the laptop to the Time Machine directly with no issues.
Any ideas on what I may be missing?
Thank you.

The Time Capsule is indeed a wireless router, also having three Ethernet ports. So it should be capable of handling up to three devices connecting via Ethernet and routing them to the Internet through your cable modem which should be connected to the WAN port on the Time Capsule.
Again, if you connect a computer directly to one of the Ethernet ports in the Time Capsule and it works to get you to the Internet, but you then connect one of the in-wall Ethernet lines to that same port in the Time Capsule and connect the same computer using the same patch cable to the other end of the in-wall Ethernet line and it doesn't work, then the in-wall cabling is bad.

How can I move (copy) my Time Capsule date to a new 2T hard drive and then wipe the TC and start as a new (clean) Time MACHINE backup?

How can I move (copy) my Time Capsule date to a new 2T hard drive and then wipe the TC and start as a new (clean) Time MACHINE backup?

Just use the archive utility on the disk page of the airport utility manual setup..
If you have lion and v6 airport utility.. it missed out. On lots of things.
Download and install the real.. UTILITY
5.6 http://support.apple.com/kb/DL1482

How to get active monitor-Multiple monitors connected to a single machine.

Hi,
How to get the id of active graphic device, in case of multiple graphic devices connected to a single machine(Multi-headed display/ multi headed nodes) using Swing.
Prashanth.

Ah, youre actually asking different things.
In your topic title, you say youre running separate instances
In your body text, you say you are under different user/schema
So tell me, do you have more than one database or not? How many entries in your TNS file?
I would say, for "multiple database instances"
SELECT
a.id, b.id
FROM
tableA a
INNER JOIN
tableB@OTHER_DATABASE_LINK_NAME b <--NOTE!
USING(id)And of course you will have to look up CREATE PUBLIC DATABASE LINK sql..
Message was edited by:
charred

I do not have a fax machin, but get a fax message when I try to print something off the internet and can't get rid of the pop-up so how to fix?

I have been dealing with this problem about a week. I have turned the computer completely off at night, but it does not correct the situation . I cannot print anything off the internet as long as the fax message is on there. I do not have a fax machine and do not want one.

What is that fax message '''on'''? <br />Hard to understand how that is a Firefox support issue as Firefox doesn't have any fax capabilities.
Perchance, do you have an all-in-one printer which can receive a fax message? Printer, scanner, and fax machine combined.<br />
If so, try looking at your user manual for that all-in-one to learn how to print that message. Or consult with a support forum for that brand all-in-one printer.
Or maybe your problem is with the Windows 7 Fax and Scan feature? <br />
http://windows.microsoft.com/en-us/windows/faxing-faq#1TC=windows-7

SPA 3102: Troubles with fax machine connected to SPA and dialing by IP PBX

Afternoon!
I have a fax machine connected to the SPA3102 and i have configured an extension from the IP PBX, that it's working as a fax, so the problem here is that sometimes when i'm sending a fax, this one fail, it shows an error, the other problem is that i'm not receiving any fax at all, the people get the tone, and actually send the fax, and here it shows "receiving" (it's the weird part) but after 40-50 seconds everything fail, it shows "error communication"
Hoping for help
Victor

Hello,
as far as I know, FAX and VoIP aren't the best friends - those technologies are not designed to work together smoothly ...
You may try following tuning :
Set your fax machine to 9600 (not 14400),
Make sure you only use G711a (Europe) or G711u (US) codec (fax will not work with others).
Activate T38 FAX support if your device FW offers such possibility.

New Time Capsule: How to copy Time Machine history from previous disk?

Hi everybody,
Just got a new Time Capsule which is going to serve as my new Time Machine Back-up.
I've got a year's worth of TM back-up on my old USB disk that I'd like to pour over to the new one.
When I try to do that, it says the Time Capsule can't be changed.
If I simply select the new TC as the disc for TM it obviously starts a new "time line".
How can I either copy the old data over, or merge the two?
Thanks,
Rob

don't try copying via finder. that won't work. directly attached TM backups are stored differently from remote ones. directly attached ones
are stored directly in a folder an the drive and the remote ones
are stored in sparse bundles. the following may work. set up the TC to be the new TM drive and start a backup. as soon as it starts stop it using TM menu->stop backup. open the TC drive in finder. there should be a sparse bundle created there. double-click on it to mount it. it should be empty.
then use the "restore" tab in disk utility to clone your old TM drive to the mounted sparse bundle. make sure to check the box to erase destination. when the cloning is finished eject the mounted sparse bundle and try backing up again.

How do you print from an iPad to a printer connected to a Time Machine?

how do you print from an iPad to a printer connected to a Time Machine?

Use a 3rd party app such as Printopia.

I installed Firefox 2 days ago (Windows Vista)& my fax machine / HP 6700 will not accept faxes now, how do I correct this problem?

my fax machine will not receive a fax.
Is there some sort of firewall or something preventing this?
or a control panel somewhere where I choose this option?
I re set the fax machine and that did not help.
None of your tutorials helped either. I could not find anything related.
I am a small business and need my fax machine.

Contact HP to set up your Fax, as edmister said.
Browsers (Internet Explorer, Firefox, Chrome) have no interaction with your fax machine, faxes are analog technology run over telephone lines, browsers are digital technology, that while it can be run over a phone line (like in DSL) Has no impact on your fax.

SAP connected fax machine issue

Hi All ,
Need to know where the fax machine settings are made . Issue is one automatic cover page is coming with To address as SAP while sending fax . Need to know where we can disable that.
Thanks & Regards ,
Sabu.

Hi check the processing routines in NACE Txcode.
Cheers!!
Balu
Edited by: Balu CH on Oct 21, 2008 6:08 PM

How to connect my copy/fax machine?

Similar Messages

Maybe you are looking for