How to connect my electric keyboard with the GarageBand?

I have a CASIO electric keyboard, and I use a cable to connect it from its audio output to my macbook's audio input. And I wanna use GarageBand to create a song with that keyboard. But it doesn't work, only my voice is recorded. I don't wanna use a microphone to record cuz makes a lot noise. Can anybody teach me how to connect my keyboard to the GarageBand directly?

record from the line-in:
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

  • How to connect my app interface with the code in flash builder?

    I'm a beginner and learning my way around actionscript,mxml and flash builder.So this may seem foolish but please bear with me,I'm creating a very simple ios app using flash builder,I have created a simple app interface (A background and a custom navigation bar)using photoshop for my app,now the question is how do i import it into flash builder so that i can connect it with the code i have written? or is there another simpler way to create a app interface using other products like fireworks or catalyst?
    In short, I want to know how is an app interface created(wt software) and how is it connected with its code using flash builder.Any help would be greatly appreciated, and tutorials would be swell
    Thanks!

    Can you use stage.width or stage.stageWidth?

  • How to connect to Xbox Live with the Actiontek GT704-WGB wireless router

    If the title got you here, then you are probably a Verizon DSL customer who is trying to connect your Xbox to Xbox Live with the Actiontek GT704-WGB wireless router and are getting nothing but errors saying, "your NAT is set too high", or, "Your MTU setting is too low", etc.  Well, after many calls to Xbox support, Actiontek support, and Verizon support, I finally came up with the solution myself.
    All that is needed is a little techie know-how about router settings and you'll do just fine!  However, if you are uncomfortable with doing it yourself (and it is really really easy to do!) then you can call Verizon support and have a tech support rep remotely conntect to your PC and make the changes for you: however, you have to speak with someone in advanced tech support and to do that you have to agree to a 1 year support contract to the tune of $14.95 per month in order for them to do it!  Scam???  You be the judge!
    So, here are the steps to take to get it working and by the way, YOU CAN NOT GET THE XBOX TO CONNECT TO THIS ROUTER WIRELESSLY!!  YOU MUST CONNECT YOUR XBOX TO THE ROUTER WITH AN ETHERNET CABLE IN ORDER FOR THIS TO WORK!!!  If you don't heed this warning, you will unfortunatly go through all the steps below, only to find that you get the same errors but, ethernet is faster than wireless so it's better!....right?.....right?   (hears crickets chirping)....right?  Oh well, I tried!  Also, you must have your Xbox on in order to change the router settings (which you'll see why later) Anyway, here's the steps:
    1) On your PC, open a browser window and type in the address bar:  192.168.1.1 and press enter.
    2) You will then see the interface on which you will make changes to the router's settings.  If at any time you are prompted for a username and password (which should happen right after you press enter) the defaults are: username: admin password: password.  If you have changed these, enter what you changed them to.
    3)Click on the icon on the top labelled "Advanced Setup"
    4)In the left section, click "WAN IP Address"
    5)At the warning screen, click "yes"
    6)Scroll down until you see "MTU setting" and enter 1370.  NOTElease don't be tempted to either enter 1500 or leaving it at 1500 (which is the default) because you might know that 1500 is the maximum at which this can be set which is TOO HIGH AND WILL NOT WORK!  Trust me and enter 1370 and then click on "apply"
    7)Click on the top icon labelled "Security"
    8)In the left column, click on "applications".  This is where we are going to open the 3 ports that Xbox Live uses to communicate with your Xbox.
    9)In the drop down box labelled "PC Name" select "Xbox 360". This is why you had to have your console on and connected cuz if you didn't, it would not show up on the drop down list!
    10)Under "category" click on the bubble next to "user"
    11)Click on "New" which is one of the blue buttons near the bottom.
    12)As for the rule name, I entered "Xbox" but you can put whatever you want but I'd use that so you know it's the ports you opened for the console.
    13)For protocol, select TCP. (Yes you will also open the same ports for UDP but for some reason if you select TCP.UDP instead of doing them seperatly it doesn't work.....I dunno why!?
    14)For all 3 "Port start", "Port End", and "Port Map Start" put the # 80.
    15)Click "apply"
    16)Now, select UDP and put the same port # 80 and again click "apply"
    17)Repeat steps 13 through 16 except with the numbers 3074 and 53, clicking apply after each one.  What you should have now on the bottom are a list of all the ports you opened, one TCP and one UDP for each number totalling 6 entries.
    18)Click "back" to return to the Applications screen.
    19)If you have to, select Xbox 360 for PC name, and click the bubble next to "user" and you'll now see the entry called "Xbox" or whatever you called it.
    20)Click that entry to highlight it and then click the blue "add" button to the left and then click "apply" at the bottom.
    21)Close the browser screen and turn off your PC and Xbox and any other hardware connected to the router.
    22)Turn the router off and unplug it and wait about 5 minutes.  It can take this long for any residual current in the router to dissapate and for the NAT table to clear itself.
    23)Turn on the router and wait for the internet light to come on green meaning the router has booted and has an internet connection.
    24)Turn on the Xbox AND ONLY THE XBOX!
    25)There is no need to go into network setting as when the Xbox is connected by ethernet, it automatically configures and connects intself.  You can, however go into network settings and perform a connection test but this to is not necessary.
    You now should be able to connect to Xbox Live!  If not, you've done something wrong and must either go through all the steps again or let Verizon do it for you (for a fee that is).

    I followed jtktlw's instructions to the letter.  Problem was I had already enabled UPnP before doing so.  Afterward I disabled UPnP and rebooted....no change.  I reset the MTU to 1500...boom, it works.  Seems for me all I needed was to open the right ports to get it to work.

  • How can connect iPhone 3 g with the notebook by Bluetooth?

    Goes it gives there a solution for or it is hopeless?
    Somebody know about how to solve the problem?

    You'll need to provide full details about the setup, including the operating system and version of iTunes on your computer, and the problem including error messages if any before anyone will be able to offer suggestions. Just saying "cannot connect" doesn't give us anything close to enough information to make a diagnosis.
    Regards.

  • My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

    My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

    The best option is an appointment at an Apple store genius bar.  The evaluation will be for FREE!
    Ciao.

  • My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help!

    My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help! How do i turn it on without finding it because she can't remember where it was.

    That is so dumb...Apple is the best and most techinological company IN THE WORLD and they don't have the time to invent something like that? HUH? All they are worried about is making the "Worlds best Phone" and they can't take the time out to help their users or anybody that has their products. All they have is "Find mt Iphone" Well they should step up and do something else to help people like me out. Find a way to turn it on and you can find it or find a way to turn it on remotely.
    Thank you for your replys

  • HT1386 When I connect my iPod Touch to a new laptop (Macbook Air) the "Info" tab won't appear and therefore I cannot sync it with my new iTunes. How can I sync this iPod with the iTunes on my new laptop?

    When I connect my iPod Touch to a new laptop (Macbook Air) the "Info" tab won't appear and therefore I cannot sync it with my new iTunes. How can I sync this iPod with the iTunes on my new laptop?

    There is no Info tab in Mavericks
    if you use OS X v.10.8.5 or earlier. If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud. For more information, see iCloud Help at icloud.com.
    iTunes 11 for Mac: Sync contacts, calendars, and other info with iPod, iPhone, or iPad

  • My laptop died so I've installed itunes onto another PC and my music is all on an external hardive which is connected to the new PC. How can I sync my ipod with the new itunes and get all the music onto itunes?

    My laptop died so I've installed itunes onto another PC and my music is all on an external hardive which is connected to the new PC. How can I sync my ipod with the new itunes and get all the music onto itunes?

    You might consider itunes match for moving CDs you've copied into your itunes library if you dont have a way to use home sharing.
    iTunes match is an optional service offered by apple that costs about $25 a year.  It scans your music library and if it finds music that is already in apple's itunes catalog it'll automatically "unlock"/"store" these in the cloud for you.  Items that it does not find in the catalog it'll upload and store these in the cloud for you and you can download them on your devices.  See http://www.apple.com/itunes/itunes-match/

  • TS2662 I am trying to connect a wireless keyboard with a numeric pad to my (recent) iMac, but it does not see the numeric pad. Any advice?

    I am trying to connect a wireless keyboard with a numeric pad to my (recent) iMac running Mountain Lion. I followed all recommendations in article http://support.apple.com/kb/TS3048#1.  My computer recognises the alpha part, but it does not see the numeric pad. Any advice?

    Hello:
    I would try resetting the PRAM and SMC.
    Barry

  • How to connect a USB-6008 with lookout6.0?

    hi >>>
    I am a student in electrical and computer department, i want to ask about
    How to connect a USB-6008 with lookout6.0 if thats possible?Could you
    provide some help?
    Regards
    Manal

    Hi Manal there is a way to do this, DAQ or DAQmx drivers have an OPC server, you can find the detailed information in the next link
    http://digital.ni.com/public.nsf/websearch/13BBC10CCC1FECBA8625720B00823140?OpenDocument
    Best Regards
    Benjamin C
    Senior Systems Engineer // CLA // CLED // CTD

  • How to connect my macbook air with thunderbolt to tv via hdmi?

    How to connect my macbook air with thunderbolt to tv via hdmi?

    With this adapter. You will also need an HDMI cable.
    The Thunderbolt port doubles as a mini DisplayPort on the MBA.

  • Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

    Fresh installation of Exchange Server 2013 on Windows Server 2012.
    Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
    your folders with your Outlook data file (.ost)" is displayed.
    If I turn off cached Exchange mode, setting the email account to not
    cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
    time.
    I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
    Microsoft Exchange RPC Client Access service is running.
    No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
    Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

    So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
    Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
    First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
    Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
    This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
    work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
    In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
    up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
    like OutlookAnywhere - which I might add had their place under that scenario.
    In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
    previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
    EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
    So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
    but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
    users.
    Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
    Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
    certificate.
    See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
    So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
    Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
    always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
    This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
    there is a 3rd - I forgot, but you get the idea).
    Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
    the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
    Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
    NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
    Open Outlook - BOOM! It works... Was it as good for you as it was for me?
    You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
    and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
    So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
    Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
    So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
    SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
    Frustrating beyond reason - that should be Exchange's new slogan...
    Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
    PS
    ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

  • How do I manually transfer music with the new itunes update for Windows?  I don't want to sync my library and lose all of my music for what I have in my current library.

    How do I manually transfer music with the new itunes update for Windows?  I don't want to sync my library and lose all of my music for what I have in my current library.

    The same way it was done in every previous version.
    Connect the device to the computer.
    Right click on the device in iTunes and select Transfer Purchases.
    Why would you lose any content by syncing with iTunes?
    Is this not the computer that the device is normally synced with?

  • Can I use the apple wired keyboard with the iPad?

    Will connecting an Apple wired keyboard through the USB connector work on a iPad?

    Some people have reported success using a wired keyboard with the Camera Connection Kit. Never tried it myself, though.

  • Macbook air charges fine with the Thunderbolt screen connection but only sometimes with the 45 W chargers.

    My Macbook air charges fine with the Thunderbolt screen connection but only sometimes with the 45 W chargers. It seems to be the combination of the chargers and the computer. I was thinking whether the Thunderbolt screen has a larger power supply which easier activates the computer to actually receive the charge. It reminds me a bit of the Nokia Lumia 800 telephone, which when totally exhausted needs a strong charger to be activated again. I am as frustrated as most others.  I have got two chargers, and both of them sometimes work, other times not. Sometimes, they start working after a while. Is Apple meanwhile coming up with a solution or advice how to handle such situation?

    I just got my ATD and late 2011 MBP up and running. I've not tried running without the power adapter from the ATD plugged in, but I just tried and didn't have any problems with the display not waking. You may want to take your query to the ATD forum - https://discussions.apple.com/community/peripherals/thunderbolt_display - perhaps someone there has experienced a similar issue.
    Good luck,
    Clinton

Maybe you are looking for