How to connect my guitar into my new 13'' macbook pro using headphone's port?

how to connect my guitar into my new 13'' macbook pro using headphone's port?

you need a standard guitar cable and a 1/4 inch to 1/8 inch adapter such as this http://www.amazon.com/Recoton-CW1521-4-Inch-8-Inch-Adapter/dp/B00006HOIW

Similar Messages

  • How do i migrate files from a imac to macbook pro using an ethernet cable. the migration program asks for firewire and i don't own a fireWire.  I do own an ethernet cable though

    how do i migrate files from a imac to macbook pro using an ethernet cable. the migration program asks for firewire and i don't own a fireWire.  I do own an ethernet cable though

    A FW cable would be far faster & Easier, but with Ethernet you need a compatible version of Migration Assistant running on both Macs.

  • I am not able to log into FaceBook on my macbook pro using my Apple ID

    I am not able to log into FaceBook on my macbook pro using my Apple ID

    Then, what razmee209 says.  It's apparently not a phone issue since other people can get in, so I'd call the facebook app developer and let them know what's going on.

  • I can't connect to my iTunes library on my Macbook Pro using the Apple Remote app on my iPhone 4S. Why?

    Hi all,
    I've been looking through the forums for help with this problem. There are a couple of threads with similar problems, but no solved threads and the discussion doesn't seem to go anywhere... As far as I can tell, it's been causing a lot of annoyance for many users, including myself, but it looks like the community's in the dark about why it's happening!
    I'm trying to connect to my iTunes library using the Apple Remote app on my new iPhone 4S. As you may know, there are two ways to do this:
    Connect via Home Sharing by setting up Home Sharing on both iTunes and the iPhone, or
    Connecting directly to iTunes using a four digit passcode.
    I've tried both methods, and neither work!
    Here's what happens for each method:
    From the Remote app start screen, I tap the "Turn on Home Sharing" button. I enter my Apple ID details (which are definitely correct), and get a confirmation message on my phone saying "Home Sharing is on using [my email address]. To control iTunes: Choose Turn On Home Sharing from the Advanced menu in iTunes on your computer." I then go to iTunes, turn on Home Sharing, enter my Apple ID again and get a confirmation message saying "Home Sharing is now on", etc. However, there's no connection formed between my iPhone and my Macbook Pro - the Remote app just shows a message saying "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account [my email address].
    From the Remote app start screen, I tap "Add an iTunes Library", and the four digit passcode is shown on my phone. I select the new "Quintin's iPhone" item that appears in the iTunes sidebar under "Devices", and enter the passcode on the screen that appears. Once I've entered it, I get a confirmation message saying "Your Remote is now able to control iTunes" with an "Okay" button. Clicking the "Okay" button makes the screen and the sidebar item disappear completely. On my phone, a message that says "Looking for ..." is shown on the screen with a spinning loading wheel, but nothing happens. After a minute or two, it stops and simply says "Could not find".
    After trying both methods, I went through all of the troubleshooting steps here: http://support.apple.com/kb/ts1741 . Absolutely no effect.
    I should mention that I was experiencing similar problems on my old iPhone 3Gs with an older version of iTunes. I thought it might have been some kind of hardware fault and expected it to clear up once I got the new phone, but the problem is still there. It's a new phone, a new computer, a newer version an iTunes... even a different network I'm trying to connect to it on. Bizarre!
    I've even tried using the Mobile Air Mouse remote application instead. However again, the Mobile Air Mouse app on my phone can't pick up the Mobile Air Mouse server on my Mac.
    I'm kind of at the end of my rope here. Anyone?

    I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2.  My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone).  I  was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did. 

  • How can i connect my IMessage into the Mountain Lion (MacBook Pro)

    I'm trying to enable receving my Imeesages in my MacBook Pro but I don't know how, Wish someone can help me.

    Open Messages from the applications folder, the Lauchpad, or your dock if it's setup there.  Go to Messages, Prefereces ..... and select accounts.  Your Apple ID should be already setup.  If it's not you can add it.  If you use more than one ID and it's the wrong one, you can delete the account from messages by going to Account Details and Sign Out.  Then, add the Apple ID you want to use.
    It appears that the syncing with iPhones is only working if you use your Apple ID email as the "Caller ID" on the iPhone and that the sync up with your phone number may not be happening until iOS 6 comes out this fall.  I'm not sure though.  I just know that mine isn't syncing with messages sent to my phone number and from other posts, it appears that other people are having the same issue.
    I hope that helps get you going.

  • Restore a Snow Leopard backup into a new 2013 MacBook Pro

    Hello,
    my late 2010 13" MacBook Pro was stolen a week ago.
    I ordered a new MacBook Pro which is bound to arrive in a couple of days.
    I need to restore all the data that I had in the stolen one and are now in a time machine backup external drive.
    I've just read that Snow Leopard is incompatible with 2013 Macs.
    What do I need to do in order to restore my data?
    Thanks.

    Sorry your topic tilte threw me.
    Before you turn your new mac on for the first time connect your TM backup drive to it. Then turn the system on. During the initial setup windwos there will be an option to restore data from a TM backup. Select that and you can copy settings, files and Apps over to your new Mac from the TM backup.
    NOTE:
    Older Power PC app will not work and probably won't be copied over. Also other Apps that are not compatible might be copied and placed in a Incompatible Apps folder. You will need to upgrade to a new version of those.

  • How do I install my old cs2 student version into my new 2014 MacBook pro? All I have is the cd and the new macs don't come with a cd drive. Also are student cs2 versions allowed to be installed to a desktop and a laptop? Help!!!

    I Bought a new 2014 laptop and new to install my old cs2 program On it. I've only downloaded in on a desktop before but that one had a cd drive. The new computers don't. Is there anyway to work around this?

    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

  • How to connect 2 or 3 externadisplays to the macbook pro 15" (mid 2010, i7)

    I have a new MacbookPro (mid 2010, i7) I have 2 HP monitors (20") and a big TV (50") I am setting up a classroom. I want to display 1 screen on the TV (which is behind me) mirroring a secondary screen I have in front of me, and also have another secondary screen in front of me.
    So far I tried connecting only 1 HP monitor and the TV connected to an HDMI splitter (after the minidisplay to HDMI adaptor) using an HDMI splitter, and I only get the image on the HP monitor, the TV is black.
    I have been reading about the USB to DVI boxes and they seem to work but not with the latest MacbookPro (i5 and i7).
    Anyone knows how to achieve this setup in my computer (1 HP (DVI) mirrored on a TV (HDMI) and an extra HP monitor (DVI))?
    Thanks

    You will need to talk to the tech support people at Matrox about whether or not you could do what you hope to do with a TripleHead2Go DP Edition. I suspect you would be limited to an undesirably low resolution (1360 x 768 or lower) on all three external displays. I don't know of any other possibility for such a setup, other than running it off a desktop computer with multiple graphics cards.
    http://www.matrox.com/graphics/en/support/gxm/

  • How to connect multiple Apple LED Cinema Displays to MacBook Pro

    I have an Apple 24 inch LED Cinema display that I run from my MB Pro. I mainly use the MB Pro+ screen for document editing.
    I would like to run a second Apple 24 inch Cinema display from the MB Pro. I am presently running another monitor successfully via a Dynalink USB splitter but would really prefer to run a second Apple monitor. I have enquired at two Apple Stores and browsed lots of sites. Multiple monitors from MB Pro seems ok (as long as it's not two Apple monitors). I would be surprised if Apple is content to pass up the opportunity to sell more of these superb screens.
    Grateful for any advice and suggestions

    In addition to the one from Atlona, there are:
    <http://www.gefen.com/gefentv/gtvproduct.jsp?prod_id=9898>
    <http://www.kanexlive.com/c247dl>

  • Can I connect RCA cables to my new 13" macbook pro?

    I want to digitize some records, am told that usb from a turntable can give poor results.
    Thanks.

    OGELTHORPE seems you're right. Looks like Apple did remove that feature from the OS. Oh well another one bites the dust.
    To the OP you'll get better results going in through USB anyway. So does the turntable have USB out? It's not clear from your first post.
    If not look at something like iMic - USB Audio Interface - Griffin Technology good basic function.
    For doing that actual recording I  like Audacity: Free Audio Editor and Recorder, works well and you can't beat the price.
    regards

  • How Can I Connect 2 External Display Monitors to a MacBook Pro? Help

    I want to know if I can (and How to) connect 2 external display monitors to a MacBook Pro... late 2006 & the new Unibody MBP.
    I'll appreciate

    Requires additional hardware - the Matrox DualHead2Go. For the late 2006, you'd need the DualHead2Go Digital Edition, and for the unibody you'd need the DualHead2Go DP Edition, with appropriate cabling (and a DVI-to-VGA adapter for the late 2006 MBP).
    http://www.matrox.com/graphics/en/products/gxm/dh2go/

  • How to connect Macbook Pro using thunderbolt to older TV

    Hi everyone. I'm trying to view streaming video from my MacBook Pro using the thunderbolt port to an older TV that doesn't appear to have an HDMI port (probably not an HD TV). I've tried using the VGA and S-Video (TV has both ports) using adapters, and tried F8 but nothing works. I am trying not to buy a Roku or similar right now, and have a variety of cables and adapters. Ideas anyone?
    I know that VGA and S-Video won't carry audio, assume I can just connect an audio cable to the earphone port right?
    Thanks in advance! Kate

    k9kate wrote:
    "Note that you'll have to change the input/source to the input you used from the MBP." Can you elaborate a bit?
    Let's say you have 2, 3 or 4 different things hooked up to your TV (Tivo, DVD player, X-Box). The TV needs to know which one you want to watch, so you have to select the proper input (the place where the Tivo etc. is hooked up to). This is called the input or source, and needs to be selected in the TV's menu. Make sense?

  • How to insert a query into a NEW workbook ?

    Hi Friends,
    Could some one tell me how to insert a query into a new workbook? i am trying to run query in NW2004S BEx Query Designer, which always open the query on web when executed. i want to run the query in NW2004S BEx Query Designer and want it to open the result in Excell.
    If i am not wrong then to do the same, i need to embed the query into workbook. Correct me if i am wrong. If i am right then plzz tell me the steps to insert the query into workbook.
    Ur help will be rewarded in terms of points.
    Thanks,

    Hello,
    If you open the BEx Query Designer from the desktop, you cannot execute the query directly to the BEx Analyzer for an Excel view. You can only execute it directly to the Web. This is true for the SAP BW 3.x version as well as the SAP NetWeaver 2004s version.
    If you open the BEx Query Designer from within BEx Analyzer, once you select (or create) your query, you will have a green check mark icon that will then allow you to deploy the query directly to the BEx Analyzer for the Excel view.
    However, this would only make sense if you are creating or modifying the query. If not, you would simply open BEx Analyzer and use the Open Query option in this tool to see your query in an Excel format, as has been previously suggested by the other respondents to this posting.
    Regards,
    Katie Beavers
    SAP NetWeaver Product Management

  • How to connect oracle database into VC?GIve step by step.

    Hi Experts,
    Please help
    How to connect oracle database into VC?
    I need step by step.
    what shall i do the first to connect via jdbc or  something else.
    whether we have to create dsn name or using jdbc connections?which one to use?
    Please give the basic steps.Its very urgent.
    Thanks and Regards,
    Nutan

    Hi ,
    all information are in the following document:
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6209b52e-0401-0010-6a9f-d40ec3a09424">How to Configure a Business Intelligence JDBC System for Visual Composer</a>
    Rgds,
    Karim

  • I own Elements 12, and have my serial number. How can I download it into my new laptop?

    I own Elements 12, and have my serial number. How can I download it into my new laptop?

    log on to your Adobe ID and find Your Orders or use this link
    http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html

Maybe you are looking for

  • HELP... How can i implement this into my code

    Hello :) I'm writing a simple game here is the code now all it does right now is it writes out the values of the cards on the screen in an applet however I want it to display card images from http://www.waste.org/~oxymoron/cards i can't get it to use

  • Table control in ABAP - beginner

    I am not able to fill data from database in TABLE CONTROL.The table is displayed with columns(which i added in layout using dict option) but on runtime there is no data in it.I am trying this for the first time so kindly guide me. Here is PBO and PAI

  • Pointer disappears after sleep...

    The pointer disappears, sometimes when G4 is woken up. If I wait a minute or so it reappears. Is this a mouse issue, or PRAM?......appreciate any suggestions

  • How do I uninstall and stop using AirPort?

    Hi All, I've been running AirPort for a year or so to get internet while I had two computers in my home, but I no longer need it as now I only have one. I basically want to stop using the AirPort (uninstall and disconnect it) and just go back to havi

  • WebView with local html file

    How can I use webview to display a local html file?