How to connect my Inspire 5200 5.1 Speakers to my XBOX? Pls Help!!!

Dear all,
I am in need of dire assistance to connect my Creative Inspire 5200 5.1 Speakers to my XBOX. If possible, I would like to maintain the full 5.1 functionality when watching my movies and playing games (that support 5.1 sound).
What other cables, adaptors, connectors do I need? Pls help... I am really not experienced with TV electronics, wires and stuff.

Ok, I did a search & found a post by NsOmNiA930 :
>>>
Or, you could make a custom analog adapter and get fake 5.1.You'll need 2 RCA couplers (or a coupler with 4 RCA Female jacks), a dual RCA to single 1/8 mini jack adapter, a single 1/8 female - 2 /8 male adapter, 2 /8 couplers, and a headphone splitter. It should look like this:RCA from Xbox Dual RCA CouplerRCA to 1/8" adapter(1)Female to (2)Male Adapter(2) 1/8" Coupler on Male ends of previous adapterHeadphone splitter on one of the couplersIMPORTANT! BACK MUST BE BY ITSELF ON THE CORRECT /8" END! CENTER AND FRONT SHOULD BE ON THE HEADPHONE ADAPTER! IN ORDER TO FIND THE CORRECT CHANNEL, DO A 5.1 TEST ON YOUR SPEAKERS AND CONFIGURE APPROPRIATELY!
>>>
Ok, can some kind soul translate that into English? What are all these components(adapter, coupler, headphone jack, 1/8?) What do they look like?

Similar Messages

Inspire 5200 5.1 speakers only two working

Hello,
I recently bought the inspire 5200 5.1 speakers. I connected everything properly and well tried them, but I got output from the front left and right speakers. The center speaker, and the left and right rear speakers produced no output.
Then I bought a 6 channel sound card, and tried to hook everything up again, but it was still the same result. All the speakers are working cause I tried them all. It seems that the lower panel insertion points for speakers don't seem to be working, or it's something that I am missing out.
Thanks

creek,
You may have to check with your sound card manufacturer for special setting to upmix the Stereo to the rest of the speaker.
If you are using Creative 5.1 sound card, you can refer to the link for the CMSS upmix feature.
http://forums.americas.creative.com/...essage.id=2563
Jason

HT201407 hi..I cant activate my Iphone 5. I bought this from someone who cant remember her apple password and even the email address that she used to set up the account.What am I gonna do now....How can I activate my Iphone. what are my options...pls help

hi..I cant activate my Iphone 5. I bought this from someone who cant remember her apple password and even the email address that she used to set up the account.What am I gonna do now....How can I activate my Iphone. what are my options...pls help me.thank you

Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
hannibalfromlemery wrote:
.I cant activate my Iphone 5. I bought this from someone
The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it.

My ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

my ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L

HT1222 i had a problem in my ipad 3.in the main screen it shows ' ipad is disabled'connect to the itunes'.what can i do for it.pls help me!

i had a problem in my ipad 3.in the main screen it shows ' ipad is disabled'connect to the itunes'.what can i do for it.pls help me!

I can't connect my ipod to itunes because it asks for my pass code which obviously I don't have it to connect to itunes to fix the problem in the first place.Thanks for your help.

I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me

I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me, M.Kumar, Chennai,
<Email Edited By Host>

There are 2 concepts attached to a bank balance. The balance as per your books of accounts and another is the balance maintained with the bank. I believe i need not explain these 2 concepts. These 2 balances can be obtained from Oracle system provided some of prerequsities are met with.
Balance as per your books - This is nothing but the GL balance available. In order to obtain balances for each bank accounts, it is advised that each bank account should have a separate account code combination. This is achieved generally by having a separate natural account for each bank. The code combination is attached to the cahs account for each bank. By maintaining separate account code combination, the balance in each code combination can be obtained from GL (provided transactions are accounted and posted in GL). These balances represent the balance for each bank according to your books of accounts. You can create an FSG for this purpose and provide the same to the customer, so that they can run the same whenevr they want.
Balance as per bank - This balance is maintained by oracle in 2 ways - either the bank balance can be manually entered for each bank account for each date (quite cumbersome). Else, while loading the bank statement, the bank balances are also loaded. There are various types of bank balances stored - value dated balance, available balance, float balance etc. Depending on the balances provided by bank along with the bank statement, the bank balance can be recorded in oracle system. After the bank statement is uploaded and balances stored, standard cash management reports are available to query for the bank account balances. In order to view daily movement, the bank statement should be loaded on daily basis.
Hope this helps.
Vinit

Voltage question for Inspire 5200 5.1 Speakers

Hi, I'm new to the forum, so I'm not sure if this question has been answered in the past, but...
I just moved back States-side after living in Pakistan for about 6 months, and I brought my Pakistan-bought Inspire 5200 speakers. I don't know if I should buy a voltage converter or whatever.
On the AC adaptor, it says "PRL. :230V~50Hz 320 mA... SEC. : 2V ~ 4.2A". I read up a little on this stuff, and, unless I'm mistaken, in Pakistan, the voltage is 220V and 50Hz, while in the US, its 110V and 60Hz.
Is it safe to use the speakers here WITHOUT a voltage converter or a step-down transformer?
If it isn't safe, then what specific things do I need to pick up from Radioshack to make sure my speakers work and don't short-circuit or fry?
Thanks.

If you use the right step down transformer than it's perfectly safe. The problem is, step down transformer worsen the sound a lot unless you use the very expensi've one. But if you can't hear the different than it's good then, trust your own ear anyway. I think the best way is to change the adaptor.

Inspire 5200 5.1 - Can it run Xbox 360??

I have the Inspire 5200 5.1 system on my PC.
I can run the Xbox 360 through the PC by running the audio outputs through the 'Line In' port on my sound card. This is probably not 5.1 but it is good enough for what little I use the Xbox.
However I would lke to use the Inspire 5200 direct to the Xbox without going through the PC if it is possible WITHOUT an expensive decoder.
Is the Inspire capable of doing this?
Is it a stand alone speaker system or does it need power from another source?
If I hook the audio out from the Xbox into the 'Front' input on 'Audio Input' will this work?

This should work as the 5200s are powered speakers. However you'll need a phonox2 to stereo mini-plug adapter so you can plug it into your speakers (the green jack on the speakers (Front L/R)).

Tutorial on how to connect my Inspire T5400 5.1 to both my DVD player and my computer

I am not really sure on how to go about it, whether I can buy something that I plug my speakers into then from there splits into two sets one for my pc one for my dvd player. Not sure whether I have to splice anything or cut anything... so could osmeone please give me some type of clue on how to go about it. Thank you very much. Please use lamen terms and give plenty of detail! Thanks you!
DVD Player
http://i2.photobucket.com/albums/y44...welary0030.jpg
Computer
http://i2.photobucket.com/albums/y44...welary0033.jpg
Subwoofer connectors
http://i2.photobucket.com/albums/y44...welary0032.jpg

JustinGB,
You will need to get a 3.5mm stereo minijack to dual RCA cable. The minijack end will go to the subwoofer output jack and the dual RCA end to the DVD player(5.1 channel output end).
Connection wise, the subwoofer front output(green) to your DVD player Front, subwoofer rear output(black) to your DVD player Surround, subwoofer center output(orange) to your DVD player Center and Subwoofer.
Jason

Connections for Inspire 5200 on a Dell Dimension

Is anyone aware of the proper connections to utilize the built-in 5.1 audio on a Dell Dimension 8400?
Are there any suggestions on which speaker system would be the best for a Dell Dimension if I should decide to replace my speakers?
Dell's online owner's manual shows that the black jack is for surround and the white jack is for the center. I have the jack for the speaker system's FRONT speakers plugged into the surround jack and the CENTER/WOOFER plugged into the center jack.
It would be nice to have real 5.1 sound coming from my computer since it's supposed to be able to handle it without using an Audigy card. I have an Audigy card in another computer, but I don't want to pull it if I don't have to.

cconklin,
Not sure about your onboard audio but you should connect the onboard audio Front jack to the speaker system front input jack, Rear/Surround jack to the speaker rear input jack and lastly the Center jack to the speaker Center/Subwoofer input.
Jason

How to get rid of pop ups saying connect to I tunes to use push notifications...pls help me out its irritating if I open any app in my iphone4 ios6

Iam unable to open any app. After I have backed up still its getting pop up connect to iTunes to use push notifications

Iam unable to open any app. After I have backed up still its getting pop up connect to iTunes to use push notifications

I have a new mac air 11inches, i tried to download my pictures using my usb mass storage device. how come my mac can't recognize and open my files? pls help...

i have a new mac air 11 inches and i tried to download my pictures using my usb mass storage device. how come my mac is not reading it? pls hel...

What exactly is your 'mass USB device', and how is it formatted? When you connect it to your MBA, does it show up on the desktop?

How do i get sound from macbook internal speakers? need sound settings help

hi,
i have installed service pack 3 on bootcamp on new macbook.
i cant get any sound with all my audio applications, even windows media player. i can see the levels and audio files playing within the software (soundforge, wavelab, cubase etc) but cant get any sound to come out the macbook internal speakers........
ive tried all the available audio driver settings from within the apps.
ive checked the sound controls menu from my system tray...all the volume faders are full, unmuted.
theres a realteck or something like that, control panel......i think realtek is the internal sound funtion of my windows xp......
anyone help?
(ive updated bootamp to 2.1 with software updater..... ive intalled the bootcamp drivers from my leopard install dvd....)
shall i put the leopard dvd in again? in case the bootcamp drivers never got installed????
i just used the first leopard dvd.........should we also use the 2nd leopard dvd????? bootcamp manual just says put leopard dvd in and install bootcamp drivers.........but it dont say which leopard dvd.........
cheers
i understand latency is gonna be an issue with internal sound drivers.....any one recommend third party sound drivers for use with internal macbook?
(for proper work im gonna use a proper external soundcard with ASIO drivers, but i wanna get half decent sound and latency from macbook internally for when i wanna use JUST the laptop, with no units connected)

dude..... i cant answer that.....cause i dont know....... im pretty sure i didnt do anything.....sound just started working..........
ive done so much over the past few weeks.....its all a blur......
seem to recall changing windows sound settings to NO SOUND to get those irritating beeps to go away..... thats all i can remember......
anyway its working.....mac internal sound is working.....and also i have found a gooooood driver to use.....to lower latency...... its called asio4all...... its the best driver i have used in cubase on bootcamp...... goooooood latency figs...sounds nice too.......
guess what? ive also had my first crash since i bought the mac......on windows xp////sdffdjojfnds
ararrrrrrrrrrrghhhhhhhhhhhhhhhh

I dunno how to play mp3 in my new mac :( i'm a newbie, pls help!

please tell me how to play mp3 on mac and i got some files transer from my pc, but i dunno how to open it here.. is there any ways to learn how to use macbook? thx alot!

Hi yy7772: This is where the mac excels: to play mp3 files, you use iTunes (included). For all other Mac type quest ions check out this site: http://www.apple.com/support/switch101/
Happy Listening
Stedman

How can I filter the rows displayed on an ADF Table ? pls help urgent..

Hi All,
I have a page with ADF readonly table, based on who is logging in I want to filter the rows to be displayed when the page is firstly loaded. This page is called from the main menu.
I have created a custom method in the Application Module Impl :
public void setInvoiceFilter () {
ViewObject vo = findViewObject("BrowseInvoice1");
ViewCriteria vc = vo.createViewCriteria();
ViewCriteriaRow vcr1 = vc.createViewCriteriaRow();
vcr1.setAttribute("Userid","xxxx");
vc.add(vcr1);
vo.applyViewCriteria(vc);
vo.executeQuery();
The question is : where and how should I call this method ?
is this a correct approach ?
Thank you very much for your help,
xtanto

I assume you're talking about a JSF application.
I think you should be able to do this in the constructor of a backing bean.
1) Add an operation binding, bound to your service method, to the page's pageDefinition.
2) On the JSF page flow Overview tab, add a managed property to the backing bean. Call it, say, myMethod, give it type oracle.bindings.OperationBinding, and give it the value #{bindings.nameOfYourOperationBinding}
3) Add a myMethod field of type OperationBinding, with getter and setter, to your backing bean class.
4) In the backing bean class's constructor, add code like:
myMethod.execute();This will execute the method every time the page is loaded.
Now, if you want to execute the method only the first time the page is loaded, it's a bit trickier. You need to set, and use, a session variable:
Map sessionVars = FacesContext.getCurrentInstance().getExternalContext().getSessionMap();
if (sessionVars.get("hereBefore") == null)
myMethod.execute();
sessionVars.put("hereBefore", "true");
}

How to connect my Inspire 5200 5.1 Speakers to my XBOX? Pls Help!!!

Similar Messages

Maybe you are looking for