How to connect my nestbox CCTV to my Mac?

Can anyone help with advice?
My camera come with phono conection and choice of scart adapter for connection to a tv but I would prefer to use my Mac.
I have tried connection with Easycap.
Ray

Welcome.
I am a little confused what you need help with.
This forum is for iMovie iOS; an edit program for iPads, iPhones e.t.c.
Your question seems to relate to Macs in general rather then iOS, or iMovie?
If so I can ask to get this moved to a forum where people might be better able to help you.

Similar Messages

How to connect my nokia 6120c to my mac laptop?

how to connect my nokia 6120c to my mac laptop? i want to use my phone as my modem

Hi,
Listed below is the step by step intructions to configure the Nokia device as a modem to a mac. If you receive any cases/questions related to this, please provide the steps mentioned below.
Steps:
Connecting your Mac to the internet is convenient and easy with your a compatible Nokia S60 device. You'll need a Nokia S60 device that supports a 2G or 3G data connection (such as GPRS or HSDPA), a compatible Mac (with the latest OS X), a USB cable for your Nokia device or a Bluetooth-enabled Mac, and a network subscription with your mobile service provider.
To set up your device you'll need to know your operator's Access Point Name (APN) and have the packet data service enabled. For help with this please contact your operator.
-In the following example, the APN name "Airtel" is used. This name will vary depending on your operator.
-On your device locate and open the Settings application. This is normally in the Tools folder.
-In Settings select and open Connection >Select and open Packet data > Select and open Access point >Type in your operator's Access Point Name
-Exit Settings. Your device is now ready to be used as a modem for your Mac!
-Bluetooth Connection: Pairing between Mac and Device using bluetooth, follow the instruction from here:
http://europe.nokia.com/support/download-software/device-as-a-modem
Note: Preferred mode is USB as it much faster than Bluetooth.
Connect the device and then go to System preferences- >Network- >Select Device (Nokia XXX)
Click on Advanced Tab > Modem tab
- Vendor : Nokia
-Model:GPRS (GSM/3G)
-Telephone Number: *99***1# (contact your operator to get this settings)
-APN: airtelgprs.com (contact your operator to get this settings)
CID: 1
Once connected it will be highlighted in green.
Hopefully this helps.
Cheers
Sandy
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

How to connect two external monitors to a Mac Book Pro?

How to connect two external monitors to a Mac Book Pro?

Not as is, but Matrox makes a peripheral that enables connecting more than one external monitor - matrox.com.

How to connect my dv camera to my mac and make movies?

i just got my new macbook and dont no how to connect my dv camera to it...i got a software disc for my dv cam but it doesnt run automatically and i dont no how to install it....it is usb connection...do i need fire wire?...help me plz help...getting frustrated ...is the any sites that help with macs ..cuz im use to pc...dont no anything bout macs...thanks so much!!!

Hello,
It would be helpful to know what camera you are trying to connect and what exactly you are trying to do with it.
In regards to firewire vs usb i only really have experience with firewire so i can not help you there unfortunatetly.
If you are just trying to get the video footage off the camera you could try and open up iMovie from within you applications folder. Attached the camera, my iMac is currently in for repairs so i can quite tell you the whole thing but look for options of attached cameras.
The reason why the cd doesnt autorun is that it is probably window software, does the disk specifically state Mac OS X?. If you double click on the cd it should open up in a window. Have a look around for any Mac folders or any obvious applications that you can run.

How to connect my electric piano to my mac book pro

Hi,
Can anyone tell me what I would need in order to connect my electric piano to my mac book pro?
I would like to record stuff in Garage band using my electric piano.
I have no idea what cables or equipment I would need, so any help would be much appreciated.
The piano I've got is a KORG EC120 and it has MIDI IN/OUT and a couple of LINE INPUTS (Though I am not familiar what to do with them! )
http://www.harmonycentral.com/t5/News/Korg-Introduces-EC-120-Concert-Piano/ba-p/ 34631250
The mac book I like to hook it up to is a 13" Mac Book Pro (early 2011).
Thanks!

There are many ways to do this but do yourself a favor and pick up a usb audio/midi interface. This will let you get either the keyboard voices or Midi input (computer Midi voices) into garageband along with microphone or other instruments if you want in the future.
You will also need a cable to connect the keyboard to the interface.

How to connect Photosmart C4795 to Wireless Network - Mac OSX 10.8.4

I am desperately confused here! When I bought the printer 2-ish years ago I was able to set it up and have it connected to my network no problem. Since then I have moved and updated my OS to Mountain Lion and lost my installation CD. As of now, this is where things stand.
When I turned the printer on and connected it to my iMac via the USB cable, the computer found it and installed it with no issues. I can print with no issues when the USB cable is plugged in.
Using the printers built in display, I have run the HP Network Configuration and the Wireless Network Test. The printer can see my network, but it won't connect to it. I have no bloody idea where I need to go to enter my network password so the printer can get online.
I've manually downloaded the HP Driver found at http://support.apple.com/kb/DL907 and that put the HP Utility on my computer (which was already there) but I don't see any place in the utility software that would let me enter my network password or even configure network settings for the printer.
My router is an Apple Airport Extreme, and the firmware is up to date. Everything on my computer seems to be up to date. I just cannot for the life of me figure out how to get this thing online. Any help would be greatly appreciated =)

Yup, there is no way to install your printer using OS X 10.8, sorry.
However, there are alternatives. Here is the easiest way:
1. On the front of the printer: Setup [Scan] > Wireless > Restore Defaults.
2. In the same Wireless menu, start WPS Pushbutton.
3. On your Mac go to Applications > Utilities > Airport Utility. Choose your Airport and click Edit.
4. In the menu bar at the top of your screen go to Base Station > Add WPS Printer.
5. Choose the FIrst Attempt mode, then Continue.
Now your printer should be connected to your wireless network. Next, go to System Prefs > Print & Scan, click the '+' sign to add your printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How can connect the airplay in between my mac and my apple tv

How can i connect airplay on the mac

You need a recent Mac (2011 or later) running Mountain Lion.
http://support.apple.com/kb/HT5404?viewlocale=en_US&locale=en_US

How to connect 2.5" SATA Drive to Mac?

I bought several 2.5" Sata drives which I will send out with data.
The problem is, that those people who receive them might not know much about computers. But I am sure, they all use a Mac.
But my concern is, how will they be able to get on the data?
I can not buy for everybody a Firewire adapter with AC power.
What would be the easiest/most simple way to connect such a drive. I presume the internal drive bay is only for 3.5" drives.....?

One cheap way to connect is with a $14 SATA to USB enclosure like this:
http://www.xpcgear.com/eb24000066.html
If you need more speed, here's a FireWire 400 one for $24:
http://www.xpcgear.com/ufe940hdcase.html
But there really is no way to transfer the data to the desktops without the use of some kind of USB or FW enclosure.

How to connect a 23" Cinema display and mac mini to an AV Receiver?

I am trying to get my 23" Cinema display and Mac Mini to a Yamaha RX-2700 AV Receiver. I am on first name terms with the guy in Maplins because I tried to get an Xbox 360 working with this display before and gave up in the end. The AV receiver has upscaling capability so I thought I'd try again. I tried connecting a HDMI - DVI adapter to the HDMI Out on the receiver and a HMDI to DVI cable from the Mac Mini to the HDMI in with a optical cable for the sound. The sound works fine but I get no display - the LED on the monitor flashes three times with a blank screen so it can't read the signal. Another option suggested was to use a VGA Converter connected to a VGA - HDMI cable but I would like to find out if that would work before going down that route?
I am looking for some advice about whether this type of configuation is possible with the 23" ACD and if so what do I need to buy to make it work? I love the quality of my ACD to avoid having to replace it with a TV to get my multi media life in order.
Many thanks

The fifth and sixth item on this page are DisplayPort male to Mini DisplayPort female "Extension cables". Under US$6 plus shipping from a reputable seller:
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10246#1024602

How to connect the 27" cinema display to Mac Pro?

Hallo, I want to connect my mac pro, early 2008, with force gtx 285 to a apple cinema display 27", which adapter do I need??? Sorry for my english, I'm from austria. Thanks for your help :-)

To drive the 27" to its full reolution you need a male dual link DVI to female mini-displayport adaptor. Apple makes one but it is not cheap ($99). Stick "dual link dvi to mini-displayport adaptor" into a google search and maybe you can find something cheaper.

How to connect ipod touch to itunes on Mac OS 10.4.11

My desktop (Tiger Mac OS 10.4.11) will not recognize my ipod touch in itunes thus preventing downloading of music to the ipod. The ipod is recognized in iphoto and is brought up automatically when attached to the desktop. The connection is via usb directly to the desktop. Are there any ideas on a fix for this problem?

If the iPod has iOS 4.2 or greater you need to upgrade the operating system on the computer. To find version go to Settings>General>About>Version
IOS 4. to iOS 5 requires OSX 10.5.8 or greater
iOS 6 requires 10.6.8 or later
If you have a 4G with IOS 6 10.5.8 may work. See:
ios 6 and macosx 10.5 on a pre intel...: Apple Support Communities
OSX 10.6.8 requires a Mac with an Intel processor
To purchase the OSX upgrade disks you have to call Apple since they are not listed in the on-line store.

How to connect my 60gb IPOD and my Mac Mini

I have my trusty 60GB ipod (no video), with the older wide connector and the funny USB or whatever it is symbol looks like a "Y".
Nice grammer huh.
ANyway the cable I have doesn't plug in to my mac mini or MBP.
What cable do I use to hook 'er up to ITUNES on either system?

Open Quicktime Player
File Menu: New Audio Recording....
However... if the headphone/microphone combination has two 3.5mm jack plugs (pink and green) then the microphone output (pink) is "mic.level" - which is TOO QUIET for the audio input on a Mac, which is expecting the much stronger "line.level" signal strength.
Solutions: get a microphone pre-amplifier between the mic and the Mac (not cheap); or a different microphone with a USB interface.

How to connect my friends apple notebook through video call

HOW TO CONNECT TO A FRIEND WHO IS USING APPLE NOTEBOOK FROM MY IMAC SUGGEST ME WAITING FOR A SOLUTION FROM APPLE TEAM SUPPORT

Hi,
Typing in all upper case is regarded and shouting here.
Presumably as you have posted in the OS X 10.7.x (Lion) area you are running this version of the OS on your iMac.
This will have iChat 6 on it.
This can use AIM, Jabber and Yahoo IDs within the app.
Apple IDS ending in @mac.com and iCloud issued @me.com and @icloud.com are also Valid AIM Screen Names.
If you use Googlemail and Enable "talk" in the products there you can then use your Google Mail ID as a Jabber ID (although it has it's own Add Account option in iChat)
Facebook has an option to Enable "Chat" which will give you a Chat ID variant on your name there and this can be used in iChat (or Messages) as a Jabber ID.
The Yahoo Account will only do Text chats.
It also has to be an actual ID registered at Yahoo.
Chats are then AIM to AIM or Jabber to Jabber or Yahoo to Yahoo.
So your Buddy will also need a suitable ID or Screen Name for the relevant service.
8:16 pm Sunday; January 19, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
Check your MacBook Pro model year against the list in this Apple tech note:
About Mini DisplayPort to HDMI adapters
Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

I need to know how to connect my macbook to the tv

I ordered the mini dvi adapter for my macbook 13in and obviously it connects to the computer but i have no idea how it connects to the tv. Where does it go? and do i need something else to help connect it to the tv? I am really confused please help.

Yep, Apple makes adaptors to go from the mini DVI on the macbook to almost any type of input that you TV will have. First check the back of your tube to find out what kind of input it has, and order the appropriate adaptor.
Luck
E

How to connect my nestbox CCTV to my Mac?

Similar Messages

Maybe you are looking for