How to connect my nokia 6120c to my mac laptop?

how to connect my nokia 6120c to my mac laptop? i want to use my phone as my modem

Hi,
Listed below is the step by step intructions to configure the Nokia device as a modem to a mac. If you receive any cases/questions related to this, please provide the steps mentioned below.
Steps:
Connecting your Mac to the internet is convenient and easy with your a compatible Nokia S60 device. You'll need a Nokia S60 device that supports a 2G or 3G data connection (such as GPRS or HSDPA), a compatible Mac (with the latest OS X), a USB cable for your Nokia device or a Bluetooth-enabled Mac, and a network subscription with your mobile service provider.
To set up your device you'll need to know your operator's Access Point Name (APN) and have the packet data service enabled. For help with this please contact your operator.
-In the following example, the APN name "Airtel" is used. This name will vary depending on your operator.
-On your device locate and open the Settings application. This is normally in the Tools folder.
-In Settings select and open Connection >Select and open Packet data > Select and open Access point >Type in your operator's Access Point Name
-Exit Settings. Your device is now ready to be used as a modem for your Mac!
-Bluetooth Connection: Pairing between Mac and Device using bluetooth, follow the instruction from here:
http://europe.nokia.com/support/download-software/​device-as-a-modem
Note: Preferred mode is USB as it much faster than Bluetooth.
Connect the device and then go to System preferences- >Network- >Select Device (Nokia XXX)
Click on Advanced Tab > Modem tab
- Vendor : Nokia
-Model:GPRS (GSM/3G)
-Telephone Number: *99***1# (contact your operator to get this settings)
-APN: airtelgprs.com (contact your operator to get this settings)
CID: 1
Once connected it will be highlighted in green.
Hopefully this helps.
Cheers
Sandy
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

Similar Messages

  • How to connect my Nokia c2-00 bluetooth Internet in iPad 2

    How to connect my Nokia c2-00 bluetooth Internet in iPad 2

    Just want do you want to do? You can only use BT on an iOS device to share an internet connection on an iPhone and iPad 3 (I think)
    iOS: Understanding Personal Hotspot

  • How to connect my Nokia 5230 to internet using Blu...

    I would like to be able to connect my mobile (Nokia 5230) to internet without using the GPRS connection.
    The only option I can see, is to connect my mobile to my PC (which has an internet connection) via bluetooth or USB and share the pc internet connection with my mobile.
    How can I do that?
    I would like to use OVI store but the only option is "Send to Mobile" It seems that it is not possible to download a file on the PC and then send it to the mobile . If I coudl share my PC internet connection with my mobile I will be in a position where I could use OVI store
    I found this post at,
    http://discussion.forum.nokia.com/forum/showthread.php?206301-How-to-connect-my-Nokia-5230-to-intern...
    While trying to find an answer to this.
    Sajit

    What you're asking is not possible. There was a piece of software called GNUBox that might have done the trick but it seems to be more or less abandoned.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • How to connect two external monitors to a Mac Book Pro?

    How to connect two external monitors to a Mac Book Pro?

    Not as is, but  Matrox makes a peripheral that enables connecting more than one external monitor - matrox.com.

  • How do I get my apps from my mac laptop to my mac desktop, How do I get my apps from my mac laptop to my mac desktop

    I just got a new mac desktop and I can't seem to figure out how to get all my apps from my mac laptop on here?

    You can re download the apps >  Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Make sure and use the same Apple iD.

  • How to connect my dv camera to my mac and make movies?

    i just got my new macbook and dont no how to connect my dv camera to it...i got a software disc for my dv cam but it doesnt run automatically and i dont no how to install it....it is usb connection...do i need fire wire?...help me plz help...getting frustrated ...is the any sites that help with macs ..cuz im use to pc...dont no anything bout macs...thanks so much!!!

    Hello,
    It would be helpful to know what camera you are trying to connect and what exactly you are trying to do with it.
    In regards to firewire vs usb i only really have experience with firewire so i can not help you there unfortunatetly.
    If you are just trying to get the video footage off the camera you could try and open up iMovie from within you applications folder. Attached the camera, my iMac is currently in for repairs so i can quite tell you the whole thing but look for options of attached cameras.
    The reason why the cd doesnt autorun is that it is probably window software, does the disk specifically state Mac OS X?. If you double click on the cd it should open up in a window. Have a look around for any Mac folders or any obvious applications that you can run.

  • Can I connect my Nokia 6630 to my Mac OS X 10.3.9?

    Hi,
    I have done a search but unfortunately can't find the answer to my query.
    I have just bought a Nokia 6630. Can I connect it via USB to my Mac with OS X 10.3.9, and if so, where can I find the software?
    Many thanks in advance for your help

    Hi emma_p
    I am not sure that there ever has been an adapted plug-in for 6630 to work with Panther unfortunately, as I think it was first listed in iSync v2.0 in Tiger.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • How to connect my electric piano to my mac book pro

    Hi,
    Can anyone tell me what I would need in order to connect my electric piano to my mac book pro?
    I would like to record stuff in Garage band using my electric piano.
    I have no idea what cables or equipment I would need, so any help would be much appreciated.
    The piano I've got is a KORG EC120 and it has MIDI IN/OUT and a couple of LINE INPUTS (Though I am not familiar what to do with them! )
    http://www.harmonycentral.com/t5/News/Korg-Introduces-EC-120-Concert-Piano/ba-p/ 34631250
    The mac book I like to hook it up to is a 13" Mac Book Pro (early 2011).
    Thanks!

    There are many ways to do this but do yourself a favor and pick up a usb audio/midi interface. This will let you get either the keyboard voices or  Midi input (computer Midi voices) into garageband along with microphone or other instruments if you want in the future.
    You will also need a cable to connect the keyboard to the interface.

  • How do you drag clips into imovie on mac laptop, how do you drag clips into imovie on mac laptop

    how do you drag movie clips from a sim card into imovie on a mac laptop?

    Open iMovie. Go to File>Import Videos and then find the files you want to import.

  • How do I get the facetime on my mac laptop?

    How do I get facetime on my mac laptop? please help me.

    Using FaceTime  >  http://www.apple.com/mac/facetime/

  • How to connect HP Officejet Pro 8610 to a Laptop that's not connect to the internet

    Just bought the HP Officejet Pro 8610 all-in-one for the local Historical Society. Neither the laptop nor the printer will be connected to the Internet. The printer will only be used for printing reports, scanning images, etc.
    I have just removed the instruction manual to familiarize myself with the connecting procedure but I notice there are several references that require internet access.
    Is there a work-around that allows me to install/connect the printer without requiring access to the internet?
    Thank you in advance for your help.
    This question was solved.
    View Solution.

    Hi,
    How many computer will be using the printer ? If only one the USB (you may have to buy a cable) is the way to go. You can also use wireless direct to print but this is not reliable:
        http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c00577405
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to connect Photosmart C4795 to Wireless Network - Mac OSX 10.8.4

    I am desperately confused here!  When I bought the printer 2-ish years ago I was able to set it up and have it connected to my network no problem.  Since then I have moved and updated my OS to Mountain Lion and lost my installation CD.  As of now, this is where things stand.
    When I turned the printer on and connected it to my iMac via the USB cable, the computer found it and installed it with no issues.  I can print with no issues when the USB cable is plugged in.  
    Using the printers built in display, I have run the HP Network Configuration and the Wireless Network Test.  The printer can see my network, but it won't connect to it.  I have no bloody idea where I need to go to enter my network password so the printer can get online.  
    I've manually downloaded the HP Driver found at http://support.apple.com/kb/DL907  and that put the HP Utility on my computer (which was already there) but I don't see any place in the utility software that would let me enter my network password or even configure network settings for the printer. 
    My router is an Apple Airport Extreme, and the firmware is up to date.  Everything on my computer seems to be up to date.  I just cannot for the life of me figure out how to get this thing online.  Any help would be greatly appreciated =)

    Yup, there is no way to install your printer using OS X 10.8, sorry.
    However, there are alternatives.  Here is the easiest way:
    1. On the front of the printer: Setup [Scan] > Wireless > Restore Defaults.
    2. In the same Wireless menu, start WPS Pushbutton.
    3. On your Mac go to Applications > Utilities > Airport Utility.  Choose your Airport and click Edit.
    4. In the menu bar at the top of your screen go to Base Station > Add WPS Printer.
    5. Choose the FIrst Attempt mode, then Continue.
    Now your printer should be connected to your wireless network.  Next, go to System Prefs > Print & Scan, click the '+' sign to add your printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How can connect the airplay in between my mac and my apple tv

    How can i connect airplay on the mac

    You need a recent Mac (2011 or later) running Mountain Lion.
    http://support.apple.com/kb/HT5404?viewlocale=en_US&locale=en_US

  • How to connect 2.5" SATA Drive to Mac?

    I bought several 2.5" Sata drives which I will send out with data.
    The problem is, that those people who receive them might not know much about computers. But I am sure, they all use a Mac.
    But my concern is, how will they be able to get on the data?
    I can not buy for everybody a Firewire adapter with AC power.
    What would be the easiest/most simple way to connect such a drive. I presume the internal drive bay is only for 3.5" drives.....?

    One cheap way to connect is with a $14 SATA to USB enclosure like this:
    http://www.xpcgear.com/eb24000066.html
    If you need more speed, here's a FireWire 400 one for $24:
    http://www.xpcgear.com/ufe940hdcase.html
    But there really is no way to transfer the data to the desktops without the use of some kind of USB or FW enclosure.

  • How to connect my nestbox CCTV to my Mac?

    Can anyone help with advice?
    My camera come with phono conection and choice of scart adapter for connection to a tv but I would prefer to use my Mac.
    I have tried connection with Easycap.
    Ray

    Welcome.
    I am a little confused what you need help with.
    This forum is for iMovie iOS; an edit program for iPads, iPhones e.t.c.
    Your question seems to relate to Macs in general rather then iOS, or iMovie?
    If so I can ask to get this moved to a forum where people might be better able to help you.

Maybe you are looking for

  • Dynamic Listing without Business View

    I have made two dynamic fields in my report and i published tha same on BOXI server. There those dynamic values got create in repository and working perfectly fine. But when i tried to run the same report which is on BO server into my local crystal r

  • About an ODBC Monitor

    Hi Fellows. I would like to ask you about any program/tool for monitor an ODBC drive. I would like to have the SQL statements that are received by Oracle from Access. Can anybody help? Thanks. Marcos Yoshiaki Ibuki null

  • ACE Probe regex and escaping Parenthesis

    I'm trying to setup a ACE probe that expects a return of (server.domain.com) EXISTS=TRUE,AVAILABLE=TRUE,ACTIVE=TRUE But it doesn't appear that I can use Parenthesis inside a regex.  I've tried escaping as well. expect \(server\.domain\.com\) EXISTS=T

  • Xorg-config isn't yet, trying nVidia-nouveau, on a desktop machine...

    Ok, I'm newbie on 'Arch', but fairly seasoned on Debian-family (MEPIS,sidux), and on openSUSE. Gotta admit, I am really LIKING this low-level installer, as a means to 'test' my Linux knowledge to date. But, it's certainly a *slower* way to get KDE-4

  • IMAQ write palette not visible

    I have installed NI Vision 2011 but IMAQ write file vi is not visible but IMAQ write file 2 vi is visible. No idea what is the problem. I am using labview 2011 on windows 7.  Kudos are always welcome if you got solution to some extent. I need my diff