How to connect my Nokia c2-00 bluetooth Internet in iPad 2

How to connect my Nokia c2-00 bluetooth Internet in iPad 2

Just want do you want to do? You can only use BT on an iOS device to share an internet connection on an iPhone and iPad 3 (I think)
iOS: Understanding Personal Hotspot

Similar Messages

  • How to connect my nokia 6120c to my mac laptop?

    how to connect my nokia 6120c to my mac laptop? i want to use my phone as my modem

    Hi,
    Listed below is the step by step intructions to configure the Nokia device as a modem to a mac. If you receive any cases/questions related to this, please provide the steps mentioned below.
    Steps:
    Connecting your Mac to the internet is convenient and easy with your a compatible Nokia S60 device. You'll need a Nokia S60 device that supports a 2G or 3G data connection (such as GPRS or HSDPA), a compatible Mac (with the latest OS X), a USB cable for your Nokia device or a Bluetooth-enabled Mac, and a network subscription with your mobile service provider.
    To set up your device you'll need to know your operator's Access Point Name (APN) and have the packet data service enabled. For help with this please contact your operator.
    -In the following example, the APN name "Airtel" is used. This name will vary depending on your operator.
    -On your device locate and open the Settings application. This is normally in the Tools folder.
    -In Settings select and open Connection >Select and open Packet data > Select and open Access point >Type in your operator's Access Point Name
    -Exit Settings. Your device is now ready to be used as a modem for your Mac!
    -Bluetooth Connection: Pairing between Mac and Device using bluetooth, follow the instruction from here:
    http://europe.nokia.com/support/download-software/​device-as-a-modem
    Note: Preferred mode is USB as it much faster than Bluetooth.
    Connect the device and then go to System preferences- >Network- >Select Device (Nokia XXX)
    Click on Advanced Tab > Modem tab
    - Vendor : Nokia
    -Model:GPRS (GSM/3G)
    -Telephone Number: *99***1# (contact your operator to get this settings)
    -APN: airtelgprs.com (contact your operator to get this settings)
    CID: 1
    Once connected it will be highlighted in green.
    Hopefully this helps.
    Cheers
    Sandy
    Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

  • How to connect my Nokia 5230 to internet using Blu...

    I would like to be able to connect my mobile (Nokia 5230) to internet without using the GPRS connection.
    The only option I can see, is to connect my mobile to my PC (which has an internet connection) via bluetooth or USB and share the pc internet connection with my mobile.
    How can I do that?
    I would like to use OVI store but the only option is "Send to Mobile" It seems that it is not possible to download a file on the PC and then send it to the mobile . If I coudl share my PC internet connection with my mobile I will be in a position where I could use OVI store
    I found this post at,
    http://discussion.forum.nokia.com/forum/showthread.php?206301-How-to-connect-my-Nokia-5230-to-intern...
    While trying to find an answer to this.
    Sajit

    What you're asking is not possible. There was a piece of software called GNUBox that might have done the trick but it seems to be more or less abandoned.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • How to connect 2 iPod classics with bluetooth

    I am trying to sync photos between 2 iPod classics, iPad4 and iphone 5 with blue tooth. The only devices that are seeing each other is the iPhone and iPad but still hasn't' synced the photos. Why re the apple devices not able to see each other?

    Havilah Farm wrote:
    Why re the apple devices not able to see each other?
    Because that's the way Apple have designed it. They have used a particular Bluetooth protocol that is designed to allow audio to be transmitted to Bluetooth headphones or Bluetooth speakers (for example) and some peer-to-peer gaming between the devices, but not the transfer of files.
    To transfer photos, Sync them via your iTunes programme. If you took the photos on the device, transfer them to your computer first and then Sync them with the other devices. For photos that were not taken on the device, they presumably were Synced from your computer originally, so simply Sync them to your other devices from the computer.
    By the way, your subject question: "how to connect two iPod Classics with Bluetooth"...
    You cannot. The Classic does not have Bluetooth.

  • How to connect Iphone4s and Ipad2 through bluetooth

    How to connect Iphone 4s and Ipad2 through bluetooth normally as we do for some general phone

    you can only connect your iPhone 4S and iPad2 for the purpose of tethering your iPhone's internet connection to the iPad.  Any other connection is not supported.

  • Bluetooths Connection with Nokia lumia to use internethotspot for iPad

    How to?

    Not sure, but I believe it only works with an iPhone.
    iOS: Understanding Personal Hotspot
    http://support.apple.com/kb/HT4517
    Use Bluetooth to tether your iPhone, iPod touch, or iPad
    http://www.macworld.com/article/1159258/bluetooth_tethering.html
    How to Connect an iPad to an iPhone Via Bluetooth Tethering
    http://techtips.salon.com/connect-ipad-iphone-via-bluetooth-tethering-25472.html
     Cheers, Tom

  • How to Connect Apple TV with dish anywhere app on ipad

    How do I connect to Apple TV to sync with my iPad so I can watch movies with the Dish any where app? I keep getting a message saying an error occurred loading this content.

    Welcome to the Apple Community.
    Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
    When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

  • Satellite M40-237: How to connect the mobile phone with Bluetooth

    I have a new Noki 62333 and I have a Satellite Toshiba M40- 237. I have a big problem with the conection between them. I don t know how to turn on bluetooth on my pc. Can you help me????

    Hello Iva
    A friend of mine has Satellite M40 and I know that this unit is delivered without BT module. If the unit has BT module you will find BT label on the bottom side of your notebook.
    To establish BT connection with his mobile phone he uses BT USB stick.
    By the way: does Iva comes from Zagreb, Croatia?
    Bye

  • How to connect to airport express without needing internet (for wifi remote)

    I am hooking up the Mackie DL 806 mixing console. my airport only works if i first have a internet connection. after I disconnect the internet it still works. I need it to work no matter what in a non internet environment  

    nicandmac wrote:
    I am hooking up the Mackie DL 806 mixing console. my airport only works if i first have a internet connection. after I disconnect the internet it still works. I need it to work no matter what in a non internet environment
    I am trying to understand this.. it sounds like you have it setup in bridge mode.. so it must get an IP from the main router to begin working.
    The Airport can work with or without internet.. but it needs to be in router mode to pass IP addresses.. and it will give errors which you must ignore.
    It is possible also to setup in static IP mode.. but you will still need to ignore errors.
    However to really help I need the whole setup.. I need to know if you are using the wireless in a secondary IP network from internet which is also running.. and if so what IP address ranges are being used.
    In other words tell me the entire setup.. what is the main router.. ?? What are the clients? How are they going to connect to the express when there is no internet??

  • Time Capsule: How to connect wirelessly to my computer without internet

    I want timecapsule to be set up for me to use wireless printing and hard drive use without having to broadcast an internet signal (dorm rules). How do I do it?
    Thanks

    Hello MBP Rocket. Welcome to the Apple Discussions!
    I want timecapsule to be set up for me to use wireless printing and hard drive use without having to broadcast an internet signal (dorm rules). How do I do it?
    I assume that you still want to have the Time Capsule (TC) provide a local wireless network, just not Internet access ... correct?
    If so, just don't connect the TC's WAN port to the school's network.

  • How to connect sony bravia tv wirelessly to internet using apple airport

    Hi. I cannot connect my Sony Bravia smart TV wirelessly to internet via my Apple Airport Extreme wireless setup. The TV status is network connection OK, but fails to connect to internet. Apple Laptop connects OK via wireless Can anyone help please.

    Hello chowpotluri, thank you for your message. Welcome to SONY Community!
    Follow these steps to access the YUPPTV app from the Internet Video menu:
    1. Using the supplied remote, press the Home button.
    2. Select Internet Video.
    NOTE: If the Internet Video option is missing, Select Refresh Internet Content from the Network section of the menu and repeat step one.
    3. Select YuppTV.
    NOTE: YuppTV requires a device registration. Follow the steps on the screen to register the account. Visit the YuppTVwebsite for account information and answers to usage questions.
    Hopefully this post helps you. 
     

  • How to connect airport time capsule through wireless internet

    Just purchased an Airport Time Capsule but having trouble to connect it through my Macbook Air using wireless. Could you please help? many thanks

    Make sure the MBA has ipv6 set to link-local only for wireless.
    I strongly recommend using short names, no spaces and pure alphanumeric.
    eg TCgen5 and TCwifi
    In fact if you keep having wireless issues.. with the MBA in the same room as the TC, change the wireless name to TC24ghz and TC5ghz so you have different names for both bands and see if that doesn't help.. try to connect to this band and then the other.
    Use WPA2 personal security.. password 8-20 characters mixed case and numbers.. no non-alphanumerics.
    Do not hide the wireless.. that is against the code and simply leads to issues.
    If you still have issues.. post back.. does the MBA work ok on other routers or wireless access points??

  • How to connect via bluetooth with wireless printer

    how to connect my macbook pro via bluetooth with epson all in one wireless TX600FW

    Bluetooth between iOS devices and computers is only for Internet tethering, nothing else.
    See: http://support.apple.com/kb/ht3647

  • How many paired and active devices will bluetooth on IPad 3 support at a time ?

    How many (Paired and Active devices) will Bluetooth on the Ipad 3 sopport at a time?

    Actually that is not quite true. Bluetooth is limited to one connection per device profile. That is to say you cannot have two bluetooth headsets actively connected at the same time, but you could have a bluetooth headset and a heart rate monitor, as the hrt monitor and the headset would be using different profiles.

  • How do I connect my MacBook pro to the Internet through the 3G server on my iPhone?

    Does anyone know how to connect my MacBook pro to the Internet through the 3G server on my iPhone?

    There is a service called Personal Hotspot that uses your iPhone's connection to share with other devices. You will need to sign up for this service through your carrier. Good luck

Maybe you are looking for

  • Error when activating update rule after transporting to QA

    Hi, When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX). 1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checkin

  • Access to system perferences from second account

    Can not access the system preferences folder from the second account setup on the Mac.  I am a new user to the apple system but have many years with the other system.  Gave the second account Admin status.  Need to change the touch pad tap function f

  • Namespace naming tips

    Hi All, I'm a newbie in XI and I'm facing my first of a long road of issues on this area I'm creating an integration scenario in Integration Builder and I'm asked for a namespace. I haven't been able to find anything that explains what is expected he

  • Release Notes about psoft 8.49

    Hello everyone, I would like to know what are the evolution between peopletools 8.48 and 8.49 version ? Thanks you for the answer. Message was edited by: user599340

  • [SOLVED] Adapting conky "# of new emails" script to a message preview

    The Conky wiki has a section to display the number of new emails (Gmail) with a python script. It appears that script uses urllib for credentials and then xml.etree to navigate the xml. I'm trying to adapt the script to display the sender and title,