How to connect my old 20in Cinema Display to my thunderbolt new MacBook Pro?

Hi everyone, I just brought a new MacBook Pro to replace a older model(brought earlier 2010), and a new thunderbolt Cinema Display. I have a old 20 inch LCD Cinema Display all the way from 2005 and brought a mini display port for my old MacBook Pro, worked just fine. However with the new Thunderbolt Display, I noticed there's another thunderbolt port behind and was thinking to connect my old Cinema Display as a secondary monitor. I've brought a thunderbolt port from amazon (http://www.amazon.com/dp/B007KB0EGC/ref=pe_175190_21431760_M3T1_ST1_dp_1 ), but my old monitor still shows black. What did I do wrong here? Thanks!

So currently there are two displays and you expect there to be three?
Can you swap the displays just to make sure there is nothing else wrong?
That is confirm:
1) MBP -> Display A works
2) MBP -> Display B works
Then try:
MBP +-> Display A
|
+-> Display B

Similar Messages

How do i connect apple cinema display a1082 to my new macbook pro

I have a macbook pro intel core duo2 and i'm trying to connect my apple cinema display a1092 to my computer, there is an adapter available, but it does not seem to address the fireware cable coming out of my cinema display

the apple display that i see online has a mag safe, usb and mini display port...connect all three to your laptop so you can charge your laptop as you use the display as well as use the USB ports on the back of the monitor.. i didnt see anything about firewire...

How Can I Get an 23" Cinema Display to work with a MacBook Pro 15"?

A 23" Cinema Display (M8536) will not display with and adapter connected to a MacBook Pro 15" (mid 2010). Adapter used is Apple Mini DisplayPort to Dual-Link DVI Adapter. What's wrong?

They removed the audio input, starting from your model, you will need an USB interface, there are may, and it depends on how high of quality you need.
This works for most applications, unless you are trying to record "music quality"
http://www.amazon.com/s/?ie=UTF8&keywords=griffin+imic+usb+adapter&tag=googhydr- 20&index=electronics&hvadid=19014779847&hvpos=1t1&hvexid=&hvnetw=g&hvrand=777870 5971251328924&hvpone=&hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_5gt435btej_b

Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

I believe you naeed the Apple ADC to DVI adapter.

How to connect 3x mini-displayport cinema displays to Mac pro

I'm looking for recommendations on how to connect 3 27" Apple cinema displays to a new Mac Pro (single card).
2 connect direct to the mini-displayports; but which adapter converts DVI-D to mini-displayport (not mini-displayport to DVI-D)?
Any suggestions/recommendations with a link would be appreciated.

In addition to the one from Atlona, there are:
<http://www.gefen.com/gefentv/gtvproduct.jsp?prod_id=9898>
<http://www.kanexlive.com/c247dl>

Will my two year old 27 inch cinema display work on the new Mac Pro?

Im interested in purchasing a new Mac Pro later this month when unvieled. My question is....will my currentl "Apple LED Cinema Display" work with the new Mac Pro with Turbo Boost ports? My display is Model # A 1316.

Yes, you can.
http://support.apple.com/kb/HT3382?viewlocale=en_US

Will my LED 27 Cinema Display work with the new Mac Pro?

Will my LED 27 Cinema Display work with the new Mac Pro?

Mini DisplayPort (like 27" LED Cinema Display) is a direct subset of ThunderBolt (like Mac pro late 2013). It plugs right in and the display portion "just works", no adapters required.

How can I transfer files from my 2007 iMac to my new MacBook Pro?

How can I transfer files from my 2007 iMac to my new MacBook Pro? It cannot be does over wi-fi as my old computer is too old. Please advise!

Use a Thunderbolt to Ethernet or FireWire adapter.
(95019)

HT201269 how do I move everything from my Iphone 5 to my new macbook pro?

how do I move everything from my Iphone 5 to my new macbook pro? the previous Macbook Pro was stolen and I don´t want oto loose all the information... music, photos, apps, videos, movies, that are in the Iphone 5...
Someone can help me?

https://discussions.apple.com/docs/DOC-3141

I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?

I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?

Firstly iWeb CAN'T IMPORT any kind of published html code as it has no import facility. You can however add html code, javascript and css by selecting the html snippet and placing it on your page the entering the code in here and clicking on Apply. You DO NOT create a shape as you say - you use the html snippet and place your code in there.
There are not really a lot of ways in which you can write code - if you want to enter small amounts of code, then you would use an ordinary text editor to do this such as Text Edit on a Mac or Text Wrangler. If you want to add code to iWeb like this, then you would either use the html snippet method in iWeb itself or you would have to publish the site to a local folder from iWeb and open the relevant html page with a text editor and add the additional code in this way and then publish. However, if he decided to add the code with a text editor, then you would have to upload the pages directly to the server using an ftp client - if you try to upload the site directly from iWeb, all the extra code will be overwritten.
As for checking whether the site was created using iWeb, all you need do is view the site in Safari and then click on View and then select View Source Code and it will tell you.
Even thoough extra code was added to the site and he might well have done this by publishing to a local folder and adding the code with a text editor, he should still have the domain file for the site too.
Ask again. I'm sure that for adding quick code, most would not want to use programmes such as Dreamweaver, but a simple text editor will suffice. As OT already said, if he claims that he does not have the domain.sites file, then try Flux 4 which is a web design programme and has full import facilities. At least this way, if he just gives you the published version of the site, you have some way of opening it.
You can download a free trial of Flux 4 and you can also purchase the full version from the Mac App Store if you decide you like it.

I want to connect my old 23" cinema display to new iMac 5K retina

I have just ordered a brand new iMac with 5K retina display & would like to link up my old 23" Cinema display to it so I can continue to have my dual screen workstation as I have done since 2005.
I could do with a little advice before it arrives as to what adaptor I will need in order to connect the two.
I am currently connected to an old 17" MacBook Pro so am unsure of how it will work with the new iMac?
The old cinema display has a 3-cable configuration (USB / Firewire / DVI cable) connecting from the power adaptor over to my MacBook Pro.

Hi John
Thanks for replying,
My current setup is this, my non apple router is accessed wirelessly by all my computers, ie imac, mac mini and macbook pro, ipad & iphones for internet.
My printer is in another room so therefore I cannot connect the AEBS (airport extreme base station) with an ethernet cable (I have intially in order to update the firmware and other updates) so in following the attached guidelines are you saying that I have to have the AEBS connected with the ethernet cable to the router?
I was hoping to wirelessly connect.
The wish is that all my devices can print wirelessly
What has happened though is that I can access the AEBS wirelessly, but it has disabled me from my router so I cannot connect to the internet neither to that network
Any other advice
Thanks
Regards

How to connect a Apple LED Cinema Display (24") to a PC with an ATI 4850?

Help!!!!
I have a new MacBook Pro and the LED Display just rocks with it, but my PC... how do I connect this MASSIVE investment to my PC with an ATI 4850?

Sadly, if there is no Mini Display Port on the 4850, you cannot.
And there are no known adapters at this time.
Thanks ... Ken

Share cinema display between Mac Mini and MacBook Pro

Hello -
I am keen to get an LED cinema display to use on my new MacBook Pro - but I share my study with my children - so want to give them a MacMini to use.
How easy is it two swap between the MacMini and the MacBook Pro ? I guess there is only one input in the LED cinema display ???
Thanks in advance.
Andrew

Interesting - I have the same idea: sharing a 24" cinema display between a Macbook Pro for myself and a Mac mini for my wife.
The only problem I see is that the display doesn't have any Firewire ports. So if I want to use an external harddrive (or a mini-DV camcorder) on both computers when connected to the display, then I'd have to plug that into the computer instead of the display ...

ITunes downloads fast on old Mac mini but slow on brand new Macbook Pro on the same WiFi network?

Hi all,
I have an old Mac mini that's from around 2008 and runs on Snow Leopard. I also have a brand new Macbook Pro with retina display that's running Mountain Lion. Both running iTunes 10.6.3.
I never noticed anything wrong with my MBP's connection speed until last night when I downloaded a free TV episode from iTunes. The download speed varied between 20KB/s and 40KB/s and it took me 7 to 8 hours to download a single episode. I checked my internet connection but there was nothing wrong with it, SpeedTest.net told me I had a download speed of 94MB/s and upload speed of 80MB/s, it was only iTunes that was unbearably slow.
Today I was browsing iTunes again and was planning to buy some movies, but again it took forever for the trailers to download. So I fired up my Mac mini just to see if it would be just as slow. Turned out my Mac mini could download the same trailers from iTunes at a much higher speed than my MBP (around 3MB/s on the ones I tested).
So what gives? They are on the same Wifi network provided by an Airport Extreme, and although my iPhone and iPad are also connected to it, no one else is doing any heavy duty downloading.
Thanks in advance!
Keywords: iTunes download speed, slow iTunes downloads, different connection speeds on different Macs, slow iTunes connection, iTunes takes a long time to download

It's possible the DNS setting your ISP is using are interfering. Although your PC works OK Macs can be sensitive to DNS settings. Here is a MacWorld DNS Troubleshooting article that explains the issue and below is how to fix it.
1. System preferences
2. Network
3. Click Advanced
4. Click DNS tab
5. Click + sign
6. Add 208.67.222.222
7. Click + sign
8. Add 208.67.220.220
9. Click OK.
10. Exit System Preferences
11. Try out your MBP and report what happened.
Roger

How do I sync my iPhone and its contents to my new MacBook Pro?

Hi all.
I've just bought my first MacBook Pro and I'm very happy with it.
I'm just trying to set up iTunes with my iPhone which I've had over a year.
The problem is that iTunes isn't detecting all of the apps currently on my iPhone; only the recent purchases/downloads I've made using the new MacBook Pro.
I assume this is something to do with the fact that my iPhone is probably still 'synced' with my old Dell which is now dead.
How do I make it so that my new MacBook Pro and iPhone talk to one another without losing all of my data/settings/layout etc of everything on my iPhone?
Thanks in advance!

By design, the iPhone will sync itunes content with one computer at a time. Any attempt to sync such content with a second computer will result in ALL itunes content being first erased from your phone & then replaced with the content from the second computer. This is a design feature and cannot be overridden. Because you are replacing your computer, your phone will see this computer as a "new" computer. The itunes content sync is one way: computer to phone. If you have photos that were synced to your phone or music ripped on your own that were not backed up, you will first have to extract them from your phone using third party software, before you do anything else, as Apple makes no provision to do so:
http://www.wideanglesoftware.com/touchcopy/index.php
Once you've done that, do the following in the order specified:
1. Disable auto sync when an iPod/iPhone is connected under Preferences>Devices in itunes.
2. Make sure you have one contact & one event in the supported applications(Address Book, iCal) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect your phone, iTunes running, do not sync at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore your itunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select merge.
You should be good to go.

How to connect my old 20in Cinema Display to my thunderbolt new MacBook Pro?

Similar Messages

Maybe you are looking for