How to connect my Qosmio F10 to the TV?

Please help!
How do I connect my Qosmio F10 laptop to the TV?

Hi
Did you check your user manual?
There you could find a useful informations and details about your notebook features and how to connect it to the TV!
Check this!
One hint; you have to use the s-video out port ;) then you could connect the TV with the s-video cable.
Bye

Similar Messages

How to connect a Qosmio G30 to the TV

Could someone please help me. I am not at all good with computers so really need it. I want to conect my Qosmio G30 to my TV.
It' s an old TV not LCD or plasma. I have a cable with my laptop which connects from the laptop to the TV via a scart connection. I then pressed FN with F5 and the G30 screen went blank and nothing happened. I did FN + F5 again and the picture returned on the G30 with much larger icons etc, but nothing on my TV.
I was advised to mess around with my display settings and enable a second monitor. I did this and followed my actions above. I got a really dark picture for a few seconds on my TV and then nothing! I have been told today to mess around with my NVIDIA settings and this should enable a scart TV connection. Could anyone please give me a definitive answer???
I apologise for my clear lack of knowkedge...

Hello
I do not know how old is your notebook but almost all older TVs have separate channel that can be used if the external device is connected. Check the remote control of your TV. There must be a button with symbol that looks like arrow to right that shows into the circle.
http://www.2ourgoal.com/UploadFiles/200732721729797.jpg - button near the 0 on the right side. Try please to use this channel on the TV.

HOW to connect to a user in the postgresql

Hi,
Can any one please help me how to connect to a postgresql and information on postgresql
Than & Regards
Poorna Prasad

Not sure about the help but fail to understand though why would one ask about Postgresql over Oracle's forums?
http://www.google.co.in/search?q=HOW+to+connect+to+a+user+in+the+postgresql++&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a
HTH
Aman....

How to connect 2 apple TV to the same wireless network?

Hi,
Can somebody please help me shed some light here on how to connect 2 ATV to the same wireless network? My first ATV connected to the network just fine and syncing with my itunes, however the 2nd ATV keeps getting problem connecting to the network everytime I tried to connect to the network. It detected my home network on Linksys router just fine, but it wont connect to it.
Hope someone can help me out here... Thanks peeps...

Hm ive make sure all the password and everything is correct and yet it wont connect. Keeps getting the problems connecting to the network, please check your setttings.

How to connect my electric keyboard with the GarageBand?

I have a CASIO electric keyboard, and I use a cable to connect it from its audio output to my macbook's audio input. And I wanna use GarageBand to create a song with that keyboard. But it doesn't work, only my voice is recorded. I don't wanna use a microphone to record cuz makes a lot noise. Can anybody teach me how to connect my keyboard to the GarageBand directly?

record from the line-in:
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to connect your hdmi tv to the Thunderbolt display?

Hello,
I've just got my Thunderbotl display which is really nice, but i have question and i hope this would be possible.
How to connect an external display, in my case the HDMI tv to the thunderbolt display?
The connection would looks something like this:
Macbookpro (late 2011 15') -> Thunderbolt cable -> Thunderbolt display -> Thunderbolt to hdmi adapter -> HDMI Display
But currently i cannot get any screen on my hdmi display (it remeans black).
p.s. runing latest version of OS X
Thanks

<http://support.apple.com/kb/HT5219>
See secrions 14 and 16.
If your MacBook Pro does support two external displays you may be able to use your TV with a Thunderbolt display. While a Mini DisplayPort adapter won't work plugged directly into a Thunderbolt display, it will work if a Thunderbolt drive is connected between the displays. This reportedly works with Seagate GoFlex drives. LaCie drives don't work plugged into Thunderbolt displays.

How to connect to Xbox Live with the Actiontek GT704-WGB wireless router

If the title got you here, then you are probably a Verizon DSL customer who is trying to connect your Xbox to Xbox Live with the Actiontek GT704-WGB wireless router and are getting nothing but errors saying, "your NAT is set too high", or, "Your MTU setting is too low", etc. Well, after many calls to Xbox support, Actiontek support, and Verizon support, I finally came up with the solution myself.
All that is needed is a little techie know-how about router settings and you'll do just fine! However, if you are uncomfortable with doing it yourself (and it is really really easy to do!) then you can call Verizon support and have a tech support rep remotely conntect to your PC and make the changes for you: however, you have to speak with someone in advanced tech support and to do that you have to agree to a 1 year support contract to the tune of $14.95 per month in order for them to do it! Scam??? You be the judge!
So, here are the steps to take to get it working and by the way, YOU CAN NOT GET THE XBOX TO CONNECT TO THIS ROUTER WIRELESSLY!! YOU MUST CONNECT YOUR XBOX TO THE ROUTER WITH AN ETHERNET CABLE IN ORDER FOR THIS TO WORK!!! If you don't heed this warning, you will unfortunatly go through all the steps below, only to find that you get the same errors but, ethernet is faster than wireless so it's better!....right?.....right? (hears crickets chirping)....right? Oh well, I tried! Also, you must have your Xbox on in order to change the router settings (which you'll see why later) Anyway, here's the steps:
1) On your PC, open a browser window and type in the address bar: 192.168.1.1 and press enter.
2) You will then see the interface on which you will make changes to the router's settings. If at any time you are prompted for a username and password (which should happen right after you press enter) the defaults are: username: admin password: password. If you have changed these, enter what you changed them to.
3)Click on the icon on the top labelled "Advanced Setup"
4)In the left section, click "WAN IP Address"
5)At the warning screen, click "yes"
6)Scroll down until you see "MTU setting" and enter 1370. NOTElease don't be tempted to either enter 1500 or leaving it at 1500 (which is the default) because you might know that 1500 is the maximum at which this can be set which is TOO HIGH AND WILL NOT WORK! Trust me and enter 1370 and then click on "apply"
7)Click on the top icon labelled "Security"
8)In the left column, click on "applications". This is where we are going to open the 3 ports that Xbox Live uses to communicate with your Xbox.
9)In the drop down box labelled "PC Name" select "Xbox 360". This is why you had to have your console on and connected cuz if you didn't, it would not show up on the drop down list!
10)Under "category" click on the bubble next to "user"
11)Click on "New" which is one of the blue buttons near the bottom.
12)As for the rule name, I entered "Xbox" but you can put whatever you want but I'd use that so you know it's the ports you opened for the console.
13)For protocol, select TCP. (Yes you will also open the same ports for UDP but for some reason if you select TCP.UDP instead of doing them seperatly it doesn't work.....I dunno why!?
14)For all 3 "Port start", "Port End", and "Port Map Start" put the # 80.
15)Click "apply"
16)Now, select UDP and put the same port # 80 and again click "apply"
17)Repeat steps 13 through 16 except with the numbers 3074 and 53, clicking apply after each one. What you should have now on the bottom are a list of all the ports you opened, one TCP and one UDP for each number totalling 6 entries.
18)Click "back" to return to the Applications screen.
19)If you have to, select Xbox 360 for PC name, and click the bubble next to "user" and you'll now see the entry called "Xbox" or whatever you called it.
20)Click that entry to highlight it and then click the blue "add" button to the left and then click "apply" at the bottom.
21)Close the browser screen and turn off your PC and Xbox and any other hardware connected to the router.
22)Turn the router off and unplug it and wait about 5 minutes. It can take this long for any residual current in the router to dissapate and for the NAT table to clear itself.
23)Turn on the router and wait for the internet light to come on green meaning the router has booted and has an internet connection.
24)Turn on the Xbox AND ONLY THE XBOX!
25)There is no need to go into network setting as when the Xbox is connected by ethernet, it automatically configures and connects intself. You can, however go into network settings and perform a connection test but this to is not necessary.
You now should be able to connect to Xbox Live! If not, you've done something wrong and must either go through all the steps again or let Verizon do it for you (for a fee that is).

I followed jtktlw's instructions to the letter. Problem was I had already enabled UPnP before doing so. Afterward I disabled UPnP and rebooted....no change. I reset the MTU to 1500...boom, it works. Seems for me all I needed was to open the right ports to get it to work.

Embedding into a web page, but how to connect to an SWF on the media server

If I do something like this it works fine. helloWorld.swf is
an interactive SWF file thats on my application server. It then
accepts parameters and successfully makes a connection to my FMS.
<object width="600" height="600"
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0">
<param name="movie" value="helloWorld.swf" />
<embed src="helloWorld.swf" width="250" height="400"
type="application/x-shockwave-flash" pluginspage=
http://www.macromedia.com/go/getflashplayer"
/>
</object>
helloWorld.swf already resides in my applicatoin folder on
the FMS. The question is, how do i access that swf in order to
stream it. My successful test connection is done like this
"rtmp://<ip>/helloWorld/_definst_/helloWorld
How do I enter that swf into the value or src field on my
object tag above? I have searched days on this. There is so much
documentation but nothing explicitly to simply streaming a file...
Thanks in advance.

Just sending this post back to the top. Seems to be a pretty
slow forum with not a lot of activity. I would think being an adobe
forum, it would more activity including moderators. Anyhow, that's
my two cents. Next post will be to a new forum place..anyone use
flashguru?

How to connect to database for all the reports FR

Hi,
I have developed 100 reports in production client, for testing purpose I have moved to
test client. How can I connect to database for all the reports at a time?
Regards
Taruni

Hi Taruni,
You can connect to the database connection for all the reports through workspace in HFM.
Connect to HFM Workspace-->click on Explore option-->and click on Tools-->click on Data Base Connection Manager and change the respective connections from Production Instance to Test Instance with required information, and than you will be able to connect to Test database for all the reports at a time.
Regards,
Srikanth

Qosmio F10 get the error "IDE #0 ERROR

hello all, just bought the Qosmio F10 installed all things i had to do. installed and registerd the norton anti-virus. everything went good. now few hours later i want to start my notebook and get the error "IDE #0 ERROR"
so i put my dvd recovery disk in, follow the steps. windows xp english, Start installation, recover entire disc, continue...
then i get the error: "error checking for a player partition - please try again! press any key to continue. then i just get: c:\>
thats all i got
any help ?
thx in advance,

Hi Maarten
I suppose that there is some problem with HDD. Obviously the HDD is not recognized by BIOS and it is not possible to access on it.
Please contact your local dealer immediately and explain him the problem.
Bye

How to connect my AirPort Express to the DSL

Hi, I bought my AirPort in Finland and go with it to home. In home I have DSL connection. When I try to connect it to the internet, it says that my internet modem not connected or broken, but with my first router it works. Help me please. Thanks for reading.

Hi Barry.
Yes, the dsl line has it's own modem. I am trying to bridge the AE so that the iMac can still connect via ethernet cable and the wireless will be available for a kindle, iPhone, etc.
I set up an airport base station with Comcast at my house with no issues at all, so I'm thinking there is something about the dsl service that I am missing?
Thanks for the info.
Chris

How to connect my Satellite P300D to the TV?

My computer is Toshiba Satellite P300D, and I want to connect my TV via HDMI, because there are 2 HDMI input port.
So what kinds of cable do I have to buy to connect HDMI? Do I have to download some software? How about the audio?
Cheers

Visit electronic store and buy high quality HDMI cable. Talk with your local dealer and pick up info which one they have.
To connect your laptop to the TV is simply.
Connect both devices with the HDMI cable, choose HDMI channel on TV and use FN+F5 to switch to TV.
Everything should be OK.
Please let us know if there is some problem.

How to connect my app interface with the code in flash builder?

I'm a beginner and learning my way around actionscript,mxml and flash builder.So this may seem foolish but please bear with me,I'm creating a very simple ios app using flash builder,I have created a simple app interface (A background and a custom navigation bar)using photoshop for my app,now the question is how do i import it into flash builder so that i can connect it with the code i have written? or is there another simpler way to create a app interface using other products like fireworks or catalyst?
In short, I want to know how is an app interface created(wt software) and how is it connected with its code using flash builder.Any help would be greatly appreciated, and tutorials would be swell
Thanks!

Can you use stage.width or stage.stageWidth?

How make connection with DataBase without define the my DataBase in ODBC

hi ...... iam using odbc-jdbc to connect an simple DB so i defined my DB on ODBC ....how i can connect my DB without define it on ODBC ,or, do this defination by programmer not by user ........thanks

after search >>u can do that by JDBC .if u connect your application with microsoft DBMS so u can download the driver free from microsoft.
good luck

How to connect Safari to DSL in the same manner as MS Internet Explorer?

I have migrated half a year ago from Win PC to iMac PC.
Currently I have two running systems iMac and temporary backup Win PC (XP Pro).
Internet connection is via Yahoo DSL.
Problem:
My Yahoo DSL system (or DSL modem) password has been lost or corrupted and Yahoo (or AT&T) automatic answering gave me a new one. How I should go to Yahoo DSL Help and set my modem password to the given system password.
Safari and Firefox cod not connect to Internet because modem has lost stored password. However, I was able to connect to Internet with Win PC using MS Internet Explorer. Reset modem password. After modem password was reset the Safari and Firefox were able to connect to Internet. Now if I would not have Win PC then I would not able to restore the lost Internet connection. Please help me how to use the Firefox and Safari in the manner MS Internet Explorer workd and was able to establish connection to Internet.
Thank you.
Leo

Hi Leo
Go to your System Preferences>Network panel.
When you select your type of connection - either Ethernet or Airport in the Show drop down menu - another panel appears with 5 panels: Select PPoE. There you'll be able to enter your Yahoo information, which includes Account Name and Password. After entering the information, check the "save password" box, plus the menu bar selection box. Select "apply"
Try your internet connection.
Ppst back

How to connect my Qosmio F10 to the TV?

Similar Messages

Maybe you are looking for