How to connect my Satellite A200 with a Philips LCS TV?

Hi, I have problems to connect my Satellite A200 1E1 with a Philips 32 PF9967D LCD-TV HD ready.
The manuals recommend a HDMI extension that is unfortunately not availble with my Laptop.
However, isn't is possible to use a S-Video connection instead? I could accept a reduced quality. When I connect the Laptop with the TV, I have the impression that the Satellite does not send any signal out. The "FN F5" combination does not show the opportunity to switch between the screens. Once I connected a beamer and had no problems at all with switching between beamer, laptop screen or both.
Any comments would be highly appreciated, thanks a lot in advance.

Hello
In user manuals is written in almost each chapter about ports or slots a short comment: depending on configuration. That means that this users manuals can be used for different A200 notebook models.
Every notebook delivered with HD-DVD optical disc drive has also an HDMI port. According the notebook specification your notebook has no HD-DVD ODD and because of that there is also no HDMI port.
For TV-out there is sonly one port S-Video. Using this port you can send video signal to your TV. I have LCD TV too and I have used it many times with my A200 notebook. It is very simply but be sure you use the right channel (S-Video) on your TV. Using FN+F5 key combination you can switch to the TV.
If this does not work you are doing something wrong.

Similar Messages

  • How to connect my macbook air with thunderbolt to tv via hdmi?

    How to connect my macbook air with thunderbolt to tv via hdmi?

    With this adapter. You will also need an HDMI cable.
    The Thunderbolt port doubles as a mini DisplayPort on the MBA.

  • Is it possibly connect my Satellite A200-10W to TV

    Could i possibly connect my satellite A200-10W to TV?
    If so, what peripherals do I need to buy?

    yes you can, simply purchase a S-Video cable(http://www.laptopaccessoriesinc.com/images/5FT_4_PIN_S-VIDEO_to_3_RCA_TV_male_Cable.jpg) and connect and you also need one Audio cable which can give sound output to TV (http://www.germes-online.com/direct/dbimage/50103844/Audio_Video_Cable.jpg)

  • How to connect a USB-6008 with lookout6.0?

    hi >>>
    I am a student in electrical and computer department, i want to ask about
    How to connect a USB-6008 with lookout6.0 if thats possible?Could you
    provide some help?
    Regards
    Manal

    Hi Manal there is a way to do this, DAQ or DAQmx drivers have an OPC server, you can find the detailed information in the next link
    http://digital.ni.com/public.nsf/websearch/13BBC10CCC1FECBA8625720B00823140?OpenDocument
    Best Regards
    Benjamin C
    Senior Systems Engineer // CLA // CLED // CTD

  • TS1986 how to connect usb optical mouse with scroll to mac

    hey its manish hea
    please can i get to know how to connect usb optical mouse with scroll so tat it can be used for AUTOCAD 2011
    i connected the mouse but its not working
    please suggest

    Welcome to the Forum!
    Well, there is no big deal about USB mouse, it's plug and play.If your mouse doesn't work at all, then its broken, or it's not compatible with mac. Test it in a PC.

  • How to defrag & cleanup Satellite C650 with Windows 7

    How to defrag & cleanup Satellite C650 with Windows 7?

    Hello,
    Moreover I can suggest you to:
    1) Perform a regular disk error-checking (check this as an instruction http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors)
    2) Perform a virus scanning with an antivirus e.g. Microsoft Security Essentials
    3) Check you computer for performance issues and resolve them (go to Start => type 'Performance Information and Tools' hit Enter, in a new window on the left side click 'Advanced tools' and review the performance issues enlisted (if any).
    Good Luck!

  • How to connect MS-sql server with SAP BW

    hi all,
    i want the connection procedure to how to connect MS-sql server with SAP BW.so that i can extract the data from ms sql server and can create cubes using that data.please help me in this issue.

    Hi Vamshi,
    Go through this DOC it explains u how to connect to other data bases like SQL...
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff]
    this is a thread related to connect the SQL server..
    [DB Connect MS SQL Server;
    Regards,
    NR
    Assign points if helpful...

  • How to connect 2 iPod classics with bluetooth

    I am trying to sync photos between 2 iPod classics, iPad4 and iphone 5 with blue tooth. The only devices that are seeing each other is the iPhone and iPad but still hasn't' synced the photos. Why re the apple devices not able to see each other?

    Havilah Farm wrote:
    Why re the apple devices not able to see each other?
    Because that's the way Apple have designed it. They have used a particular Bluetooth protocol that is designed to allow audio to be transmitted to Bluetooth headphones or Bluetooth speakers (for example) and some peer-to-peer gaming between the devices, but not the transfer of files.
    To transfer photos, Sync them via your iTunes programme. If you took the photos on the device, transfer them to your computer first and then Sync them with the other devices. For photos that were not taken on the device, they presumably were Synced from your computer originally, so simply Sync them to your other devices from the computer.
    By the way, your subject question: "how to connect two iPod Classics with Bluetooth"...
    You cannot. The Classic does not have Bluetooth.

  • How to share broadband internet connection on Satellite A200-1VG

    Hi,
    I am very new to the world of laptops, 3 days old. In fact, I have a desktop (the OS is XP professional) and have just bought my self a Satellite A200-1VG (the OS is Vista).
    I believe it is possible for 2 machines to share a broadband connection, but how I do not know. I must confess to being quite ignorant when it comes to technology ( you have probably gathered that by now) and I ask that any advice given will be given in not too technological language.
    Thanks in advance from a newbie.
    MegP

    Okay, firstly some routers or mdoems come with 2 ports on the back so you can connect two different computers so simply plug them both in
    if not, then i advise you buy a router which allows you to add numerous computers to the same network via wires or add numerous computers wirelessly
    i have one computer connect to my netgear router -wired
    i have one computer wirelessly connected with a Netgear USB wireless reciever
    then i got my laptop which is connected via wireless
    i have xbox live which i connect to the internet via my laptops wireless connection, this can be done with any pc or laptop aswell
    what you do is
    wireless networks - where it showws any detected networks
    change advanced options - on the side
    advanced tab
    then allow other computers to use this computers internet connection
    simple as
    all you do is plug in your other pc or whatever

  • Connecting a Satellite A200 to a TV with video and audio.

    I have a Satellite A200 and was wondering what cables will connect it to my TV with both Video and Audio. I have an S-Video cable at the moment but I need the sound out of the TV.
    Thanks.

    The problem is that s-video cable doesnt transmit the audio signal but only video.
    If you want to get the sound on TV you will have to use an additional RCA cable.
    http://en.wikipedia.org/wiki/RCA_connector
    Best regards

  • Can not use my Satellite A200 with TV

    Hi,
    sorry to bother you all with this - I recently purchased a Satellite A200-A1L and have been trying to connect it to my TV via s-video leads... I am not new to this and know how to set it up but I seem to be having problems doing it on this laptop.
    I have enabled the TV and set up everything to go but my TV will not pick up the signal or the signal is not being put out by the graphics card? My previous laptop worked fine with s-video and the same TV I still own (a 24" Sony Trinitron). I purchased this laptop to do the same but it seems that it will not work - is there anything you can do to help me please?
    Despite trying all the functions and reading in depth everything to do with the video outputs AND everything saying its running fine it just wont work HELP ME!!!
    PS: I am happy with the laptop in general it is a nice piece of kit, I am just unhappy that the s-video will not run properly.
    Kind regards, Lisa.

    hi buddy, sorry to say i tried that but i get no signal. i dont have a lcd tv i have a sony trinitron, which worked fine before with s-vid. as i say i have tried everything in the book to get this running but to no avail..... all help would be greatly appreciated. a friend of mine had this exact problem too - he upgraded his laptop and could no longer use the s-vid with his older tv. to solve the problem he went out and bought an lcd tv. working fine now. if i had the money i would have 1 already and know it would work fine but i dont PLS PLS PLS help me

  • How to connect the Satellite Pro P100 to Hifi

    I've got Satellite Pro P100. How to connect this notebook to HiFI
    This is probably easy, but what can i say... just call me stupid.
    I've got the lead that goes out of the headphone jack, it links up to my hifi nice.
    Trouble being, there's a nasty hiss in the background. Tried plugging my boys mp3 player into the lead, and that works fine.
    Any chance of some help... thanks

    Hi
    In my knowledge you can connect the Sat Pro P100 to HiFi only via a 2-RCA Audio Y cable adapter. In my knowledge the notebook does not support the S/PDIF audio out so you will be able only to use an analog sound port.
    You could also buy a stereo adapter with 2x cinch jacks to connect the notebook to the Hifi. Such adapter can be plugged into the headphone jack
    Check this:
    stereo adapter
    I think you should visit the nearest notebook dealer. He can show you the right and supported cables and adapters.

  • Cannot connect my Satellite A200-1MB to new WLAN router

    Hi All,
    Recently i bought the LinkSys Router (Model no: WRT120N) and configured it. But it is not connecting to my TOSHIBA laptop (model no: Satellite A200-1MB) with this new router.
    It is a wireless connection. I don't think its something to do with the router because the other laptops can access the signal and they can able to connect to that router.
    Can anyone please help me out in fixing this?
    Thanks & Regards,
    Razzaq.

    hi rajak.net,
    sure all users in this forum are willing to help...
    make sure that:
    - the same encryption method is used
    - the same access key
    - the same channel is used
    - the ssid is visible
    if you cant make a connection turn of *all* encryption and test it
    sometimes a update of the ap firmware makes it running...

  • Wireless connection on Satellite A200-1CR does not work correctly

    Hi,
    I've a problem with my wi-fi connection. Despite of I'm staying near my router I can't access to the Internet.
    If i have connection, it's level from 1 to 3 (5 is the best).
    I have the same problem with hot-spot. I cant access to the Internet or use only messenger, can't surf in the Internet, check my mails, etc.
    Another person haven't this problem in the same places. They can access to the Internet. What's wrong? Can you help me?
    I've a Satellite A200-1CR.
    Piotr
    PS. Sorry, I doubled thread

    Hi,
    I have Atheros WiFi card, but when i configured my router i write WEP key and when i configured my connection on notebook i use the same key.
    I have the same problem with hot-spot :(

  • How to connect my Satellite A300-1J1 to HD TV

    Hello
    I have a Toshiba laptop model Satellite A300-1J1 (which does not have a HDMi socket) & have just purchased Toshiba XV551D 40" HD tv. Want to be able to connect laptop to tv with the best picture quality possible, would a DVI to HDMI cable be better than the standard 15pin monitor to external monitor/tv cable?
    My laptop has a IEEE1394 socket, i'm presuming this is the same as a DVI socket??? (I could be wrong tho!) Also on reading the tv manual, it says unless I am connecting HDMI to HDMI, I would need a separate audio cable?
    Please advise asap, I'm looking to buy all necessary leads online rather than go shopping so want to make sure I get correct leads from the off.
    And apologies if i sound thick lol.
    Thanks

    HDMI or DVI will be the best quality.
    15pin VGA is analog and has a limited resolution.
    If your TV has speakers, you can simply use HDMI to output the sound to the TV (HDMI includes audio signals).
    If you use DVI, you will need an Audio Cable from the headphone jack on the laptop, to your Speakers/Hifi.
    IEEE1394 or FireWire is not a video connector. It is similar to a USB port, primarily used to transfer video/audio from a camcorder to your PC.

Maybe you are looking for

  • Cannot sync my iPhone with iTunes 12 mac as it says cannot allocate a resource. any solutions?

    Can anybody help I have been trying to fix this for a few months now, I don't know whether it is the phone or a problem with yosemite. Any ideas?

  • How to get the size of the cuurrent illustration

    Sorry, I made a mistake before this one. The questios is this: can anybody tell me how can I get the size of the current illustration, (as oposed to the page size) in points. Something like 120 points wide and 87 points High?. What function do I need

  • How do I acquire the Go Ropin' app for my Ipod Touch?

    I recently found a section in Spin to Win rodeo magazine advertising a team roping game for the ipad, iphone, and ipod touch.  However when I clicked the link to download it from the apple website a message appeared informing me it was no longer avai

  • SRVCTL - Error

    Hi, When i run the command *./srvctl status database -d <db_name>* on Node 1 i get the following Error: # ./srvctl status database -d <db_name> ./srvctl: line 179: 30283 Segmentation fault $JRE $JRE_OPTIONS -classpath $CLASSPATH $TRACE oracle.ops.ops

  • How to open object,  when I use SMW0

    Hi, Expert: when I use to tcode SMW0. I can see some template object Z_CUST_CREATION_NOTIFICATION_ENGLISH. how to open this object. Thanks,