How to connect my servlet to a real mobile through wi-fi
hii all , i need to connect a servlet found on netbeans 6.0 on my pc to the nokia mobile supporting wi-fi through
when it get to an emulator it works , but now i need to see it on my mobile by browsing it , how would i doo that??
Multi-posted to 6 forums, no replies.
Please don't do this!
Similar Messages
-
How to connect a Windows computer to Base Station through Ethernet
I use Road Runner to connect to the internet. My setup is like this.
Roadrunner comes in to the cable modem. My cable runs from the modem to Airport Base Station. My MacBook Pro sees the base station fine and I'm accessing the internet wireless through Airport. All is well there.
My wife has a PC running Windows XP. I put my Airport Extreme disk in the PC and it loaded the software.
I have an ethernet cable plugged into the back of the PC running over to the Base Station to one of the ethernet ports. There is a green light beside the cable on the base station and also on the pc where the cable plugs into it - it blinks off and on on the PC.
Yet, when I get on the PC, I cannot access the internet. As you can probably already guess, I'm not too saavy on the PC. I have restarted the PC and tried all I know to do, but I still can't connect to the internet. I'm sure I'm missing a setting.
Can someone please "hold my hand" and walk me through how to set up the PC? I can't get very far on the PC going into Airport Utility because it says I don't have an internet connection.
Please help! (And talk to me like you're talking to a rock . . )
Thanks
ReggieCheck out the following iFelix article to see if it will help getting the Ethernet-connected PC to access the Internet: Connecting a XP PC to a Airport Network via the LAN port of the Airport Extreme Base Station
-
How to connect to excel document at network machine through oracle ?
Hello !
I am able to read excel doc at my local drive through sqlplus(oracle).
Please help me to modify steps to access excel docs at network machine.
steps:->
1) start\settings\control\panel\administartive tolls\data source odbc\system dns\driver for microsoft excel (*.xls)\dns source at my local drive.
2)C:\oracle10g\product\10.2.0\db_1\hs\admin\initNITIN.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = TESTDS
HS_FDS_TRACE_LEVEL = 0
#HS_FDS_TRACE_FILE_NAME = aetna_xls.trc
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
3) adding one more listener in listner.ora
SID_LIST_HSODBC_LISTENER =
(SID_LIST=
(SID_DESC=
(SID_NAME=NITIN)
(ORACLE_HOME=C:\oracle10g\product\10.2.0\db_1)
(PROGRAM=hsodbc)
HSODBC_LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1555))
4) entry in tnsnames.ora
ABC.SCF.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1555))
(CONNECT_DATA =
(SID=NITIN)
(HS=OK)
5)lsnrctl stop listner
6) listner start HSODBC_LISTENER
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle10g\product\10.2.0\db_1\network\admin\listener
.ora
Log messages written to C:\oracle10g\product\10.2.0\db_1\network\log\hsodbc_list
ener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1555)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1555)))
STATUS of the LISTENER
Alias HSODBC_LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 30-JUN-2007 12:30:25
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle10g\product\10.2.0\db_1\network\admin\listene
r.ora
Listener Log File C:\oracle10g\product\10.2.0\db_1\network\log\hsodbc_li
stener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1555)))
Services Summary...
Service "NITIN" has 1 instance(s).
Instance "NITIN", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
7)create database link test
connect to "ben"
identified by joe
using 'ABC.SCF.COM';
8)SQL> select * from all_objects@testin;
OWNER OBJECT_NAME S OBJECT_ID
DATA_OBJECT_ID OBJECT_TYPE CREATED LAST_DDL_ T S T G S
Sheet1$ 0
0 TABLE 30-JUN-07 30-JUN-07
Sheet2$ 0
0 TABLE 30-JUN-07 30-JUN-07
Sheet3$ 0
0 TABLE 30-JUN-07 30-JUN-07
My queries are :
1)Is it possible to connect to a document at network
if yes then for , do i need to map a drive.
please explaqin how what changes required to make it possible to read a network excel documnet through oracle.
Thanks in Advance
--AjayHi Justin ,
Thanks for your prompt reply ...
I have mapped network machine folder to X:\
now I can access this on my local machine by x:\
And dsn it pointing to document on x:\
then i tried to connect , but got an error.
SQL> select * from all_objects@testin;
select * from all_objects@testin
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC Excel Driver] '(unknown)' is
not a valid path. Make sure that the path name is spelled correctly and that
you are connected to the server on which the file resides. (SQL State: S1009;
SQL Code: -1023)
ORA-02063: preceding 2 lines from TESTIN
Do I need need any other changes in above confiiguration..
or create link statement need to be modified...
SQL> create database link testin
2 connect to "SCF\ben"
3 identified by "joe"
4 using 'ABC.SCF.COM';
please suggest -
How to connect my mac pro(retina) and HDTV through HDMI to HDMI cable?
I get a new Mac Pro, it has the HDMI port, but when I connect it with my HDTV which also has HDMI port use HDMI to HDMI cable directly, nothing happened!
NVIDIA GeForce 7300 GT:
Chipset Model: NVIDIA GeForce 7300 GT
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0393
Revision ID: 0x00a1
ROM Revision: 3008
Displays:
Cinema HD:
Resolution: 1920 x 1200
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display Connector:
Status: No Display Connected -
How to connect apple tv to older tv's through dvd player?
Is there a way to connect the apple tv to an older tv through a dvd player or just to the tv?
thxNo, you have to connect it to the TV. If you don't have an HDTV you would need to find a converter and HDMI is the only thing officially supported on the current model so there's no guarantee it'll work. Some have had success, others haven't
-
How to connect to an iMac in a LAN through Time Capsule as router
SITUATION:
We have a Time Capsule at work, which we use as a router for a LAN which includes 2 iMacs, 1 PowerBook G4, and an HP Officejet Printer.
The Time Capsule connects to the internet through Ethernet, via a Static IP address. All the computers connect to the internet wirelessly through the Time Capsule, and the printer is wired to the Time Capsule.
We are trying to connect remotely to the computers in the office, keeping in mind that the Time Capsule as a router is in the middle.
SET-UP WORK DONE SO FAR:
We opened the Airport Utility, selected the Time Capsule, Advanced tab, Port Mapping option and added a device, using the local IP address of the computer we want to make available remotely.
In the Port Mapping Setup Assistant that comes up, we ran three scenarios: (1) left the Service field without a choice once and then (2) with Apple Remote Desktop and (3) Personal File Sharing.
In the first scenario, we chose 49999 as Public and Private TCP Ports (we read the figures could be in an approximate range of 42-65k), while we left the UDP Ports fields blank. In the other two scenarios we left untouched both the UDP and TCP Ports that appear as defaults when the Service field is selected.
We hit the Continue button and the Update button afterwards. The Time Capsule saved the information and restarted.
In the Sharing preference under System Preferences we chose Remote Management and clicked on the Computer Settings... button. We checked the VNC button and included a password.
REMOTE ACCESS WORK:
When we wanted to access the iMac that we just thought we had set up for remote access using a different computer connected to another network, we could not connect.
We used Chicken of the VNC to try to access the local iMac, using the Time Capsule Static IP address and the VNC password set in the Sharing/Remote Management preference in the iMac. We have been unable to access the local computer connected wirelessly to the Time Capsule so far.
We get the following message:
Could not connect to server
Connection timed out: ()
Any help out there?
RodThe TC is not a streaming device.. it is merely a hard disk mounted inside a router.
That means My Receiver.. whatever that happens to be.. has to be a media device that can play from a network file store.. So there is no settings in Airport utility.. because the TC is too dumb to need to know anything.
BTW the TC is a bad place to store files, as it has no way to back itself up. -
How do I connect my MacBook pro to the Internet through the 3G server on my iPhone?
Does anyone know how to connect my MacBook pro to the Internet through the 3G server on my iPhone?
There is a service called Personal Hotspot that uses your iPhone's connection to share with other devices. You will need to sign up for this service through your carrier. Good luck
-
How to connect to the Stratus?
Hai ,
I am doing a project in peer-to-peer video conferencing. we are using the stratus sevice.Can anyone tell me how to connect to stratus(CODE)?
We went through many codes.We didn't get connected.
This is the one of it
netConnection.connect(StratusAddress + "/" + DeveloperKey);
what is this stratus address?we got the developer key.
From where we get Stratusaddress?
Is this correct?
rtmfp://stratus.adobe.com/4423df5893dcbe33c8e5fe75-e866dfa19977/
requesting u reply it fastly
Advanced Thanxyou need flash player 10.1 beta
netConnection.connect(StratusAddress + "/" + DeveloperKey);
netConnection.addEventHandler(netStatueEvent,netStatueHandler);
private netStatueHandler(event:netStatueEvent):void
// switch event.info.code to deal with your business
// if connection successful you will get netConnection.nearID; -
How to connect lap to internet by using the E52 mo...
I am using nokia E52 mobile i try to connect my laptop to internet by mobile through nokia Ovi store but it says connection fail.
Can anyone assit me to connected to internet?.....
SivaYoou could try PC Suite, or try completely removing all Nokia/Ovi software and drivers from your PC including drivers and running Nokia PC Cleaner and then try a fresh install. Also check your firewall is not blocking PC Suite/Ovi suite !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' -
How to connect servlet to mysql database
Hi all,
I am new to mysql. After many difficulty I have created a database with table in MySql. Now I want to connct it to a servlet. How do I do it?
Can anyone tell me the steps, including the step to create MySql datasource
thanksthanks for the reply. I know the basics of jdbc and can connect with sqlserver. Bt how to connect with Mysql? I mean what do I provide in dsn unless I create a MySql datasource. I cant find any tutorial which teaches how to create MySql datasource. Can you give me any link???
thanks -
How to connect servlet with jsf
hello everybody, please help me
on how to connect jsf to a simple servlet. jsf bean is populated with values entered by user, but to use that bean in servlet i have instantiated new bean object so how i can access values entered by user as bean object contains initial values of variables.
actually i m developing a sample application jsf as component framework,hibernate as back end layer & spring as middle layer but right now i want to connect jsf to database using servlet & hibernate .So i want to access form bean of jsf so that i want to use form bean to do ORM in hibernate. but how can i get values entered by user in my servlet so that i can set these values in bean object.
please reply
Thanks
Edited by: Manjinder on Oct 15, 2007 6:31 AMPlease elaborate 'connect' in this context. This sounds a bit odd namely.
You can invoke a servlet using a plain GET query or a POST query using a <form> element.
If you're saying that you want to use some business logic which is available in a servlet, then you're looking in the wrong direction. Refactor that business logic in a separate class so that a simple Servlet as well as a JSF backing bean can use that logic. Then you can use JSF h:form with commandButton/Link to invoke the backing bean's action which on its turn invokes that logic. -
How to connect Servlet to Oracle
so far i have see some example from internet on how to connect servlet with Oracle.. but i don't undertand the statement below
"jdbc:oracle:thin:@elab-unix4.bus.umich.edu:1521:elab"
can any expert please explain to me??
what is @elab-unix4.bus.umich.edu ?? elab is database's name?so far i have see some example from internet on how to
connect servlet with Oracle.. but i don't undertand
the statement below
"jdbc:oracle:thin:@elab-unix4.bus.umich.edu:1521:elab"
can any expert please explain to me??
what is @elab-unix4.bus.umich.edu ?? elab is
database's name?jdbc:oracle: type driver
thin: Type of driver again. Oracle distinguishes between thin/thick, but I'm not sure of the features. We use thin.
:@elab-unix4.bus.umich.edu:1521:elab
IP Address of box where db resides:@elab-unix4.bus.umich.edu, port:1521, db instance: elab. -
How to connect swing to servlet
tell me how to connect swing to servlets
You could use url Connection for connecting to servlet that is on a webserver.
But you should have some mechanism to maintain the session/state of conversation -
How to create the servlet as acontroller and how to use it
how to create the servlet as acontroller and how to use it
>
John
Please update your forum profile with a real handle instead of "914824".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I am going to have over 50 buttons in a page, Why? This would be a most unusual UI paradigm. I've never seen such a page, which suggests that whatever you want to do is normally done another way. Please explain the requirement in more detail.
just wanted to know if its possible to do something like this in java.
Java is not used in programming APEX UI behaviour. Java and JavaScript may share initial syllables, but they are not closely related.
It's possible to achieve a great deal in JavaScript, but a clear definition of the requirements is necessary. Do you mean the buttons should be dynamically generated? If so, yes, this is possible in JavaScript. What would drive the process?
Also, i would like to have dynamic action on it, for example, when the button is pressed, fill a string of text into other items(text field) within the page. Without more detail its not possible to make any specific suggestions. For example, I certainly would not want to create 50+ individual dynamic actions relating to different buttons. -
I am confused as to how to connect my external start botton. I would like it to function like a start button on a front panel of a VI. I would like to use the +5V on pin 14 but I really don't know where to go from here. Any guidence for a novice would be most appreciated.
phod,
This is the LabVIEW Real-Time forum, so I suggest that in the future that you post this type of question to the Multifunction DAQ forum.
For the simplest solution you will have to connect your button to a digital line of your board, consult the sc-2345 user manual for a diagram of where these lines are exposed. You will have to connect your start button in series with a line that is high, such as your 5V pin or another digital line. Then connect this to a digital line that will be your start trigger.
Your program can poll the digital line that is connected to your button in a while loop and when it goes high, it lets the rest of the program execute. For the programming, I suggest you take a look at the shipping examples that come with LabVIEW. If yo
u have LabVIEW 7.0 go to Help>>Find Examples. Open Hardware Input Output>>Traditional DAQ>>Digital Input and Output>>E Series for some examples of digital I/O programming with E-series boards.
Hope that gets you started.
Gerardo
Maybe you are looking for
-
Extend Provisioning (from OIM to OID) for already provisioned resources
We use OIM 9.1.0 to provision users to several target systems, for example OID. Not all information stored for a user in OIM is also provisioned to OID (for example department or location or phone is only stored in OIM). The provisionig task automati
-
Mac MDD won't boot from the OS 9.1 install CD.
I thought the MDD was the last of the dual boot Macs. I have 10.5.6 installed on one HD and I want to install 9.1 on a separate internal HD. Whether you hold down the C key or select the 9.1 install CD as the start up disk you get the little apple fa
-
I have mini display to DVI and DVI to VGA adaptor. And the DVI connections don't fit there are 4 pot on the button on both side of straight strip. Gets in the way. Do I need to purchase a mini Display to VGA adaptor
-
I just upgraded to Yosemite. Iphoto is now broken. Upon upgrade receiving error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
-
Best type for financial counting
What is the best type of number if I'd like to count prices with tax and without???