How to connect my TC behind a "numericable la Box" ?

I had my box connected to my iMac. I had a "box" from Numericable which includes Wi-Fi. I have been told in my apple store to disconnect my TC from the Mac and to connect it to the Box. Wi-fi is working with the TC, but it is not found for using the Time Machine to save my Mac.

The TC is which model??
If it was plugged into the iMac and working over ethernet that is far superior to using it plugged into the main router.. there is absolutely nothing wrong with continuing with the setup you had.. why are you trying to fix it??
Plug the WAN port TC into the existing router LAN port by ethernet.
Reset the TC to factory.. no backups will be lost.. but this is essential to change over setups.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Redo the setup via the airport utility using all short names.. no spaces and pure alphanumeric. NOT apple names suggested by the setup wizard.
When finished check that the TC is bridged.. if you still have issues please post a screenshot of the summary page ..
This is summary. Click edit and then screenshots of the internet and network tab in the TC.

Similar Messages

How to connect my ipod to a wifi live box (france)

the network is found they ask me a code
I type my wep code and it does not work
to you know the solution
thanks michel

hi Michel,
Do not forget that you need to put the Livebox in "association" mode otherwise you will not succeed in connecting to your wifi network. (sur les Livebox Inventel, il faut appuyer sur le bouton "1" se trouvant à l'arrière. sur les Livebox Sagem, c'est un bouton à enfoncer près de la prise d'alimentation). The Livebox remains in "association" mode for 10 minutes, this gives you enough time to enter your WEP key..
Plus d'info sur le mode d'emploi de ta Livebox.
Bye,
/Phil

How to Connection CF10 to Apache on Separate Linux boxes

Is there documentation on this? We have CF10 installed on one Linux server and would like to connect it to Apache installed on a second Linux box.

Hi,
I have done this in Windows and Linux both for CF 9, but you can follow the same for ColdFusion 10. The place where we have to enter the IP address, put in the IP address of Remote server where you have installed ColdFusion 10.
In Web Server machine create the Identical directory as /opt/ColdFusion10/config/wsconfig and then place all the files,
Manual Connector for Apache: http://helpx.adobe.com/coldfusion/kb/coldfusion10-apache-manual-connector-configuration.ht ml
In ColdFusion server machine, you don't have to create this connector directory.
Please check this article, this is for CF 9.
http://helpx.adobe.com/coldfusion/kb/manually-configure-web-server-connector.html
Hope this helps.
Regards,
Priyank

How to connect any scanner and cash draw box in retail outlets

we have JHS 10g oem copy.how can connect with barcode scanner and cash draw box, print invoice over the JHS? is it any pre defined ADF application available in Oracle for retails?

we have been developing ADF application,we pause development? due to the connection with cashdraw devices( Point of Sale Devices) over the JSF pages! this is our core issue! how can achieve this goal?
we have 40+ outlets with CashDrawer with bar-code scanner! those devices should communicate with our ADF application!
either any such type of devices are compatible with ADF application.please suggest,we can buy.

Can I connect a WRT54g behind a WAG54g ?

How can I connect a WRT54G behind a WAG54G ?

No. It is not really making sense. Why do you want to have a routed LAN? Why do you want a router inside your LAN? A router is a separating network element. It separates distinct subnets. For most home networks this is not what people want. Windows home networking depends to some extent on an connected ethernet network, i.e. a single broadcast domain. A router creates two separate ethernet networks between which you can router traffic. Most consumer routers won't allow you to configure them in a way so that broadcasts will actually cross the router.
If you have a router inside your LAN you will not be able to do Windows file and printer sharing across the router as you are used to do it in a single subnet. You cannot do workgroup browsing and name resolution across the router without a domain controller/server providing this service for you.
Also, using software which requires you do "open ports" or configure "port forwardings" are harder to configure because you may have to configure this on two routers.
Moreover, as you are having two wireless routers: wireless roaming between two separate IP subnets is not possible without reconnection. The client which leaves one access points and moves to the next one must get a new IP address as it belongs now to a different subnet.
You will only want to operate a real router inside your network if you either have a very big one and with a nice server inside or if there are specific reasons to separate the networks, e.g. when you want to run a server in the internet and at the same time prevent this server to access any other computer as you worry that the server may get hacked and used to access your LAN. Then you can setup a gateway router and connect the internet server to this router. The second router creates a second private LAN inside the first one's. This second LAN is where you connect all your other computers.
But generally, most home users don't want to run two routers in a home network. They want easy file and printer sharing. They may want to be able to extend the wireless coverage and create a roaming network.
I hope, it makes sense now why I asked my original question and you can now think more about what you actually want to do with the second router...

How to connect my friends apple notebook through video call

HOW TO CONNECT TO A FRIEND WHO IS USING APPLE NOTEBOOK FROM MY IMAC SUGGEST ME WAITING FOR A SOLUTION FROM APPLE TEAM SUPPORT

Hi,
Typing in all upper case is regarded and shouting here.
Presumably as you have posted in the OS X 10.7.x (Lion) area you are running this version of the OS on your iMac.
This will have iChat 6 on it.
This can use AIM, Jabber and Yahoo IDs within the app.
Apple IDS ending in @mac.com and iCloud issued @me.com and @icloud.com are also Valid AIM Screen Names.
If you use Googlemail and Enable "talk" in the products there you can then use your Google Mail ID as a Jabber ID (although it has it's own Add Account option in iChat)
Facebook has an option to Enable "Chat" which will give you a Chat ID variant on your name there and this can be used in iChat (or Messages) as a Jabber ID.
The Yahoo Account will only do Text chats.
It also has to be an actual ID registered at Yahoo.
Chats are then AIM to AIM or Jabber to Jabber or Yahoo to Yahoo.
So your Buddy will also need a suitable ID or Screen Name for the relevant service.
8:16 pm Sunday; January 19, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
Check your MacBook Pro model year against the list in this Apple tech note:
About Mini DisplayPort to HDMI adapters
Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

I need to know how to connect my macbook to the tv

I ordered the mini dvi adapter for my macbook 13in and obviously it connects to the computer but i have no idea how it connects to the tv. Where does it go? and do i need something else to help connect it to the tv? I am really confused please help.

Yep, Apple makes adaptors to go from the mini DVI on the macbook to almost any type of input that you TV will have. First check the back of your tube to find out what kind of input it has, and order the appropriate adaptor.
Luck
E

How to connect a Sony Bravia TV to the internet through your Airport network

Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

I have now had a detailed reply from Sony Europe and the way to do this is to:
1.       Press Home on the TV Setup
2.       Use the right and left arrow to select Setting.
3.       Use the up and down to select Network, press Enter.
4.       Select Network Setup.
5.       Select Wireless setup.
6.       Select Scan
7.       Select your network
8.       A new screen will appear asking for entering the security key.
9.       Enter your WPA2 key.
10.   Select Enter.
11.   It will take you back to the same screen asking for entering the
security key.
12.   Press the right arrow.
13.   Select Auto.
14.   Press the right arrow.
15.   Select Save and connect.
These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

How to connect my Mac book Pro to a TV

How to connect my MacBook Pro to the TV using HDTV cable

I am assuming your TV has HDMI connector.
In that case, if your MacBook is the retina-one, you have HDMI connector there too. All you need is HDMI cable to connect teh two.
If your MacBook has thunderbolt port instead, you need Mini DisplayPort to HDMI adapter and HDMI cable.
Hope this makes sense.

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

How to connect my iPhone and iPad to Apple TV

How to connect my iPhone and iPad to Apple TV

Connect the iPad and Apple TV to the same WiFi network. Double Tab the home button on the iPad and then swipe your recently used apps from left to right until you see the mirroring icon which looks like a retangle with an up arrow. Tab that icon until you see the Apple TV. Tab Apple TV and slide the slider to the ON position. You should now see your iPad screen on the TV the Apple TV is connected to.

How to connect my ipod to itunes if my ipod is disabled and my top button is broken

how to connect my ipod to itunes if my ipod is disabled and my top button is broken

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to connect my perfectly-working 20-year-old Apple Personal Laserwriter 320 to my iMac running Mountain Lion?

How to connect my perfectly-working 20-year-old Apple Personal Laserwriter 320 to my iMac running Mountain Lion?
Thank you, Morty S.

I have a perfectly-working LW 4/600 with exactly the same issue. They use localtalk - a long obsolete network connection, that doesn't connect to modern networks, and appletalk as the comm protocol.
I think the only choice you have is to use an old powerPC Mac as print server. You tell me which old Mac you have, with a localtalk connector, or that runs OS X 10.4 or earlier (so it speaks appletalk), and I'll tell you how I've done it for the past 11 years or so.
Right now I use a G4 running 10.4.11, plus an etherMac ethernet to localtalk adapter.
Before, I used a PMac 6100 running LPD server software.

How to connect my phone with the cloud

How to connect my iphone to the cloud so I can download Itunes

Do you have an Apple ID, and are you signed in, go into your settings>iCloud to check. You shouldn't need to download iTunes because that app is on your iPhone, could you give me more information of what you are trying to download.

How to connect my TC behind a "numericable la Box" ?

Similar Messages

Maybe you are looking for