How to connect my USB internet modem to iPad2?

hi,
I am looking for way to connect my USB internet modem stick to iPad2; I understand one way is to get a pocket Internet hub and thru that I can connect via WiFi.
But is there any way that we can directly connect the USB modem to iPad and use it?

A 3G wireless router may do the job. I have used that years ago.
http://www.aztech.com/prod_3g_hw550.html

Similar Messages

  • HT6220 I have an Epson WF 7610 wifi printer that i connect using my internet modem. How do i print from my new ipad air?

    I have an Epson WF 7610 wifi printer that i connect using my internet modem. How do i print from my new ipad air?

    Read About AirPrint

  • I have iPhoto 11 with Lion and when I try to post photos into MobileMe in Share I get the message that iPhoto is not connected to internet. Can anyone tell me how to connect iPhoto to internet?

    I have iPhoto 11 with Lion and when I try to post photos into MobileMe in Share I get the message that iPhoto is not connected to internet. Can anyone tell me how to connect iPhoto to internet?

    My solution, which is not much, is to restart iPhoto and it then connects to the Internet. This has been an ongoing unsolved problem.

  • How to connect a USB-6008 with lookout6.0?

    hi >>>
    I am a student in electrical and computer department, i want to ask about
    How to connect a USB-6008 with lookout6.0 if thats possible?Could you
    provide some help?
    Regards
    Manal

    Hi Manal there is a way to do this, DAQ or DAQmx drivers have an OPC server, you can find the detailed information in the next link
    http://digital.ni.com/public.nsf/websearch/13BBC10CCC1FECBA8625720B00823140?OpenDocument
    Best Regards
    Benjamin C
    Senior Systems Engineer // CLA // CLED // CTD

  • Mac OS 9.1 How to connect to the internet

    How do I connect to the Internet with PPP (dial-up access and a modem? What are the procedures. I am using a OS 9.1.
    Please help.

    Well, first you need an ISP=Internet Servce Provider to provide you with internet service.
    You can then go to your Mac OS Help Menu for detailed instructions. You will need to make the connection through your TCP/IP Control Panels.
    If you run into problem you can check Knowledge Base Article http://docs.info.apple.com/article.html?artnum=106871 Mac OS 8, Mac OS 9: Troubleshooting a Dial-Up/PPP Internet Connection.
    Post back if you run into any problems. Knowledgable users still using dialup service and/or know more about it than I do will be able to help you.
    Good luck!

  • How to connect a "Clear Network" Modem to my Airport Xtreme?

    Hello friends. I recently purchased the clear network modem. I need to know how to connect it to my Airport Extreme and get my local network at home working with 4 computers. Thank you!

    Except that I don't know much about the Extreme, it should be simple.
    Power down the computers, the Extreme, & the Clear Modem, wait 5 minutes, connect an Ethernet cable, (it is one with Ethernet right?), from the Clear Modem to the WAN port of the Extreme, power up the Modem, wait 3 minutes & power up the Extreme, wait 2 minutes & power up the Mac(s).
    Windows directions, but basically the same to setup the Extreme to hand out IPs...
    http://oit.ncsu.edu/resnet/apple-airport-extreme

  • How to connect Trigger USB-6009 on a flowmeter

    I have a flowmeter with the data:
    sensing principle: hall-effect, non contacting
    output square wave: NPN o.c.
    Voltage supply: 4,5-24 VDC
    output current: 13mA max
    more you can find in the attachement and i use the USB-6009.
    How i have to connect the flowmeter to the trigger (PFI0)?
    Thanks in advance for any help!
    E.Stein
    Attachments:
    flowmeter.pdf ‏17 KB

    Thanks for
    Info!
    I work with
    LabVIEW 8.6 and the configure and programming 
    of
    falling-edge
    events is not the problem.
    The Problem
    is the connection. How to connect the flowmeter to the
    USB-6009? Because the 6009 have no gate and out.

  • EPC3925 mit USB Festplatte verbinden / How to connect an USB HDD to an EPC3925

    Moin!
    Ich habe hier ein EPC3925 Kabelmodem stehen und möchte gerne eine USB Festplatte daran anschließen. Wie wird das gemacht?
    HI!
    I have an EPC3925 cablemodem and want to connect an USB HDD. How I have to do this?

    Is this external USB HDD formatted in NTFS? It would have to be either FAT32, or preferably HFS+, to be usable from the Time Capsule (TC) as a shareable AirPort Disk. If it is already in FAT32 or HFS+, you may need to use a powered USB hub for it to be recognized as the USB port on the TC provides limited power to connected devices.

  • How to Connect Phone to Internet - Nokia Lumia 820

    In Lumia 820 how to connect
    my system for internet
    Moderator's Note: The subject was amended. We have given a more appropriate subject the concerned topic.

    Hi bug_karthick,
    Are you having any issue connecting your phone to the internet? There are two types of connection you can use, these are mobila data and WI-FI. If you're pertaining to a different concern, please elaborate on this one.
    You can also read the User Guide that comes in the sales pack for some instructions. If you no longer have this copy, you can download it from here:
    http://nds1.nokia.com/phones/files/pdf_guides/devices/Lumia820/Nokia_Lumia_820_UG_en.pdf
    Keep us posted.

  • How to connect ipad to internet

    method to be best used to put ipad on internet

    Google "How to use iPhone to connect iPad to internet?".  Over 50 million matches. Much faster than waiting for somebody to type a page of instructions here. 

  • How to connect to an internet hotspot

    Hello,
    I have just installed my airport express and can play i tunes on my hi fi. So very happy. Only problem is in my condo we have a hot spot for internet connection. At the moment I can either use the imac to connect to the internet or connect to the airport. Is it possible to connect to these 2 networks at the same time?
    Thanks for any advice offered and happy new year.
    regards
    Richard

    You can use the instructions in KB 302153, AirPort Express: How to join an existing wireless network in client mode to get the AirPort Express (AX) to join the hotspot... just like your iMac.
    But be aware that anyone, yes anyone, attached to that hotspot will be able to send music to your AX or print if a printer is connected to your AX.

  • WRT120N Suddenly stopped connecting to the Internet (Modem)

    Hi!
    Well, I have a WRT120N Router for 11 months to now. I never had a problem with the Router, but since 2 days ago, It didnt connect to the internet.
    My network is:
    Internet > Cable Modem > WRT120N > Computers
    As I said, the problem is that the Router doesnt has Internet Connection.
    Things to take in consideration:
    The Cable MODEM ISN'T the problem Because if i connect the modem directly to a computer, I have Internet connection without problems.
    I Diconnected and Connected both Modem and Router in several ways and several times, and it doesnt work.
    I also tryed clonning my PCs MAC address to the Router and it was the same.
    The Router Indeed receives the External IP Address from the Modem, and also, it changes if i restart the modem (as my ISP IP is DHCP). But there is NO internet conection.
    The Router had the 1.0.05 Firmware, and i upgraded to 1.0.06, and the problem persists.
    Another thing to take in account is that if I turn off my modem and the I turn it On, sometimes, the router receives Internet connection, but in matter of Seconds (minutes as much), the internet connection falls.
    This is NOT an ISP problem, because as I said, if I connect the Modem Directly to any PC, i have a perfectly normal Internet Connection, And also, I called my ISP and they Said me that there werent any problem on their network.
    I have also tryed with the "Router Dianostics" (the Ping and Traceroute options that are in the Router's Webend and also, no conection. So its NOT a Cables problem.
    So, im thinking that this could be a hardware related issue...
    What do you think?

    Hi
    Well i belive the only thing which is left now is DNS.. Might be the DNS address that you are getting from the ISP is not working through the router.. You can try in putting a Global DNS address on the setup page of the router..
    And if that does'nt resolve the issue.. It could be hardwire issue with the router itself.

  • Does anyone know how to connect with an external modem and AOL service?

    i just got the macbook yesterday and the modem came today, and i cannot figure out how to connect with an AOL account using the external modem. does anyone know how, or have the same problem??
    Macbook 1.83Ghz White   Mac OS X (10.4.7)  

    Hi MacMan2006! And Welcome To Discussions!
    Do you have the AOL software installed?
    When you open System Preferences > Network > Location: Automatic & at Show: is there an option to select External Modem?
    If so, is your Modem Model listed?
    ali b

  • Does anyone know how to connect an iphone internet to a pc

    Does anyone know how tp connect an iphone to a pc for internet

    Read here:
    http://support.apple.com/kb/ht4517

  • URGENT: How to connect iPhone to internet over ad-hoc wi-fi network from MacBook?

    I need to access the internet over wi-fi on my iPhone, but there is no wi-fi network I can use, so I am creating one with my MacBook. I choose "Create Network…" from the Airport menu on my Macbook, and I am able to connect my iPhone to the ad-hoc network I have  made, but I can't access the internet with it, for some reason.
    I think this might have something to do with one of the following two things, but I'm not sure:
    1.) In system prefs > network on my Macbook, it says:
    "Wi-Fi has the self-assigned IP address 169.254.83.143 and will not be able to connect to the Internet."
    2.) Also in system prefs > network, under 802.1X, it says: "Authentication server is not responding".
    Any help will be deeply appreciated.

    To add more, when looking at the network (you have to be on it or near it) in your list, click the blue arrow next to it to get the settings for that network. On that screen you can tell it to forget.

Maybe you are looking for

  • Hey all.  I have two 22" Acer monitors that I picked up pretty cheap from A

    Hey all. I have two 22" Acer monitors that I picked up pretty cheap from Amazon. Currently I run on my laptop with one of the monitors off to the right. Works pretty well but I'd like to do the following: I wanted to set it up so that when I'm at my

  • JAR not working

    I have made an application in Eclipse and I want to make JAR file now. I have done Export to JAR file from Eclipse but it's not good. I have .txt files and .bmp files that my application uses and I have put them all in JAR file but when I double clic

  • Result_cache on tables

    Hi all, I'm just experimenting with result_cache at the table level: SQL> select *   2    from v$version; BANNER Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE    11.2.0.3.0   

  • When I double tap on an app it doesn't open the app

    When I dbl tap an app it doesn't do anything?

  • Where do I send my iPhone to be replaced

    Basically I have arranged for my iPhone to be replaced as it keeps turning off despite having plenty of battery etc. Long story short... Where do I actually send it to!? No info given what so ever as to where to send it in the UK?