How to connect New Airport Time Capsule to non Apple asdl router

Guys,
I have just purchased a new AirPort Time Capsule to back up the various macs in my house. I want to connect it to my wireless router which is a non apple product but the setup instructions are a little unclear to me.
My current router has simply a phone line connector and the power source coming into it. Do I simply connect an ethernet cable from the Airport to the Router. And if so, do I use the single Ethernet WAN port or one of the three Ethernet LAN ports on the rear of the airport? I assume the other end of the cable goes into any of the Ethernet slots on the back of my router which are marked 'Ethernet', or would it go into the socket marked 'Broadband WAN'?
Appreciate your help and if anyone is willing to speak on phone, I am very ahppy to call you in the next couple of hours! I am in the UK
Best, Anthony

thanks LaPastengue!
Here is what ive got
What ATT router do you have? Exact make and model please.
    gateway 2wire from at&t
What TC do you have.. Latest AC tall one?? Or older one?? If older. .please tell us the model number. A1409 for example from the base mat.
     yes I have the latest airport time capsule 2TB
Please tell us the full setup.. what is currently plugged into the main modem router??
     The Main modem route has an ethernet cord plugged in the other side of the cord is plugged into the phone      jack
Do not plug the TC in first.. plug a single ethernet TC to the computer.. Hmm. so I need an additional ethenet cord to plug the TC into the computer? Leaving the router plugged in as is?
Open the airport utility and change the TC to bridge mode.
https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-23706673-32722 6/450-411/bridgev6AU.png
Update the TC and then plug it into the ATT modem and plug it into your computer or use the wireless and then tell us what happens.

Similar Messages

How to connect my airport time capsule to my at

Am I missing some kind of special cord? I can start the software and the software recognizes the airport time capsule only if I plug the single ethenet cord into the time capule not the AT&T router.
Anyone have a minute to help a big dummy here?

thanks LaPastengue!
Here is what ive got
What ATT router do you have? Exact make and model please.
    gateway 2wire from at&t
What TC do you have.. Latest AC tall one?? Or older one?? If older. .please tell us the model number. A1409 for example from the base mat.
     yes I have the latest airport time capsule 2TB
Please tell us the full setup.. what is currently plugged into the main modem router??
     The Main modem route has an ethernet cord plugged in the other side of the cord is plugged into the phone      jack
Do not plug the TC in first.. plug a single ethernet TC to the computer.. Hmm. so I need an additional ethenet cord to plug the TC into the computer? Leaving the router plugged in as is?
Open the airport utility and change the TC to bridge mode.
https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-23706673-32722 6/450-411/bridgev6AU.png
Update the TC and then plug it into the ATT modem and plug it into your computer or use the wireless and then tell us what happens.

How do I make airport time capsule work with Linksys cisco router?

Hi all.
I bought an airport time capsule 3T and want to connect it to the internet, using a macbook with OS X 10.9.2. Currently I am using a Linksys Cisco router model WAG54G2.
I followed the steps of the setup airport guide: Connected the WAN port of the airport with an ethernet port on the router, plugged in the power cable, filled in the internet username and password. In Airport Utility I can see the airport and the internet icon, both with green dots most of the time. But it seems to disconnect every minute or so, green dots turning orange and the status light on the airport flashing orange. The internet light on the linksys also goes on and off. When the internet is on, it is quite slow.
Advice is welcome!
Kees

No guarantees here. AirPort Utility 6.3.1 is a big drop down from the 5.x versions in Leopard and Snow Leopard.
Hold in the reset button on the back of the Time Capsule for 9-10 seconds and release
Allow a full minute for the TC to restart to a slow, blinking amber light
Click the AirPort icon at the top of the screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on Time Capsule.
The example below shows an AirPort Express. You will see Time Capsule.
As soon as you click on the Time Capsule, AirPort Setup will open up automatically and take a minute to analyze the network....and probably suggest that the Time Capule will be configured to "extend"....which is wrong.
Click the Other Options button at the lower left
Click Add to an existing network
Next to Connect To.....select the wireless network name from the drop down list....if it appears. Otherwise type in the exact name of the wireless network.
Click Next
Confirm any settings again and wait to see if AirPort Utility 6.3.1 will allow the Time Capsule to join the wireless network.
You have about a 1 in 5 chance that this will occur.
Post back on your results.

I recently purchased a brand new Airport Time Capsule 2TB. I already am using the previous generation time capsule to back up all my computers data. May I ask how can I complement the usage with my new time capsule?

I recently purchased a brand new Airport Time Capsule 2TB. I already am using the previous generation time capsule to back up all my computers data. May I ask how can I complement the usage with my new time capsule?

By default your new Time Capsule will broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN
Most likely your iMacs will be connected to the wireless network created by the Virgin Media router. However, both should see the Apple Network under the AirPort icon's drop-down menu as another wireless network that they can connect to. Is this not the case?

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

Start with a "hard reset" (see below) then use AirPort Utility to configure it.
When asked what you want to do with it, indicate that you want it to add to an existing network, similar to the following screenshot.
Follow the prompts that will eventually lead you to the words "wirelessly extend..." as shown.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

I am setting up new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resetting and unplugging. How do I fix this?

I need help setting up my new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resets

I need help setting up my new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resets

I set up a new airport time capsule. Most devices work fine however now my apple tv 2nd gen won't work.

I set up a new airport time capsule. Most devices connected fine however now my apple tv 2nd gen won't work. I turn it on and it searches for time and date but goes no further. I can't by pass it either. Any suggestions?

I can't by pass it either. Any suggestions?
Does that mean you cannot move it to the TC and plug in by ethernet? What does bypass mean?
I would still move it closer to the TC.. and just trial it there. Range on some AC models for 2.4ghz is worse than old one. For some people.
Another thing to try is fixed wireless channels.. one of the very few options still available in the AC model.. lock the 2.4ghz to 11, 6, 1 .. try it in that order.

Is the new AirPort Time Capsule compatible with a fibre optic modem?

I will be having fibre optic set up in my new home. The new AirPort Time Capsule states that it si able to connect to cable or DLS modem for internet access. Will I be able to connect this device to a modem designed for fibre optic internet?
Many thanks
CS

Yes. All it needs is a modem (cable, fiber, satellite, DSL) with an Ethernet output (not USB).

Connect to AirPort Time Capsule remotely via Windows 8?

Is their a way to connect to the new AirPort Time Capsule 802.11ac remotley via Windows 8, 7, or XP? I've tried to open up the smb port (445) but i get no luck on my mac or pc. I opened the afp port (445) and i get right in. Any suggestions?

SMB is blocked by 90% of ISP's around the world.. the number of unprotected windows computers that would be exposed opening SMB would probably cause the WWW to collapse.
SMB is entirely unsafe.. it is a local LAN protocol to never ever be used over the internet. It has poor security and when people setup LAN sharing it is often setup with none.
The TC does not expose SMB to WAN.. only AFP..
And no windows computer has AFP protocol add ons.
Summary.. it cannot be done.
Now the right way.. Use a Mac. Either directly or via BTMM and iCloud.
Or relegate the TC to bridge and buy a proper vpn router.. Connect to the network using vpn and you can fully access all network resources as if you were on the local lan. A vpn router is not expensive.

I have a rMBP that needs to be backed up. The Wi-Fi in my house is poor and I do not have an Ex. Hard Drive. I want to get the new Airport Time Capsule, but can you accomplish it's benefits wirelessly?

So...
I have a modem across the house and my room is at the opposite side. I believe that you have to connect the Airport Time Capsule via modem cable in order for you to appreciate the benefits of the boosted up Wi-Fi. However, I want the airport time capsule in my room, without having any extra cables plugged into it AND also benefit from the Wifi boosts, as well as back it up wirelessly.
Is there any way to do this? I was reading up on it and there are search queries bringing up "bridges" and all that stuff, but I haven't found a clear answer on it.
So, to recap:
I want the Airport Time Capsule to not only back up my rMPB and help my wifi signal out, but to do all of this with no additional cables having to be plugged in.
Thanks.

Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods

I purchased a new airport time capsul to use with my older MacBook Mac OSX 10.6.8 and am having trouble downloading the updated software for it .

I purchased a new airport time capsul to use with my older MacBook MAC OSX 10.6.8 Can't seem to download the upgraded software. Can anyone help?

Please review the System Requirements for the Time Capsule.
http://www.apple.com/airport-time-capsule/specs/
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

Can I use my new airport time capsule 3TB for my personal cloud

I am trying to get my own personal cloud. Can I use my new airport time capsule to accomplish this?

The Time Capsule stores data on its internal drive and not in the cloud. If you want it actually put in the cloud, it needs to be separately set up with a hosting or storage service.
(92923)

Will my MacBook Pro '11 support the software needed for my new AirPort Time Capsule?

I've got a MacBook Pro '11, OS X 10.6.8 and am trying to back up my photo library to a new AirPort Time Capsule 2TB.
When trying to set it up in AirPort Utility, I am getting the warning "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility."
1. Where do I go to get the latest version of AirPort Utility?
2. Will the latest version work with OS X 10.6.8?
Thanks for any help you can offer.

Yes. The latest version will be installed when you upgrade to Yosemite.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite - System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

My computer is macbook white with iOS 10. 6.8, will i able to use the new Airport Time Capsule 2TB and what does it mean administrate the Airport Time Capsule 2TB ?

my computer is macbook white with Mac OS X (10. 6.8), will i able to use the new Airport Time Capsule 2TB and work properly with Time Capsule on my computer to back up wirelessly?
And what does it mean "to administrate" because it was written in requirement of the Airport Time Capsule 2TB ?

You must use a Mac running Lion (10.7.5), Mountain Lion or Mavericks to be able to set up the Time Capsule and make any changes to the settings.
A recent version iPhone or iPad could also be used for this task.
From the Specifications on the Time Capsule:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

My 5 year old Airport Expresses don't work with the new Airport Time Capsule?

My question is after wasting hours trying to install my new Airport Time Capsule, Ive noticed that the "Airport Utility" doesn't recognize any of my 4 five year old Airport Expresses. An error message says " This version of Airport Utility doens not support this (these) base stations"? Does that mean that their is no work arounds which means I have to purchase 4 replacements?

You need the older airport utility.. that can be installed on Lion or Mountain Lion.. it cannot be installed on Mavericks.. do you have an older computer even a windows one.. or can access, borrow or bribe a friend over for drinks with laptop.. then you can configure your expresses.. !!
There is a rather complex workaround on Mavericks.. when I posted it in the past.. Apple deleted it.. go figure.
Kappy's post is still there.
https://discussions.apple.com/message/24338414#24338414
Perhaps they like him more than me.

How to connect New Airport Time Capsule to non Apple asdl router

Similar Messages

Maybe you are looking for