How to connect Oracle forms 11g to Database?

Hi,+
*I've been facing some issues with connecting my forms 11g to database 11g . . it is quite different from 10g*+
can anybody help me with this, please?+
Thank you in advance.+

Can anybody help me, please?!
If this section is not the right place to post my issue, could you advise me where else should I go?
Thanks. .

Similar Messages

  • How to connect oracle forms 6i with .odb database

    Hai,
    I need to connect oracle forms 6i with .odb database.
    What are the software i need to install.
    tell me the steps hoe to connect the oracle forms6i with .odb database

    I must say honestly that I got a little ticked when you have mentioned .odb is oracle lite.You should mention the complete name of the software whichever it may be as its not at all mandatory,everyone would know the acronym.
    Anyways,a quick search revealed this.
    Connect Forms 6i application to Oracle 10g Lite database on notebook
    I have not worked in Oracle lite at all.So I can't help much in it.But as per the thread,it wont be a straight connectivity.I would suggest you contact Support
    Aman....

  • How to connect oracle client (xp) to database server

    how to connect oracle client to database server
    i have following information
    --server ip
    --port no
    --database name.                                                                                                                                                                                                                                               

    In addition to these parameters you need username and password.
    Then you can connect with
    sqlplus -L username@//server_ip:port_no/database_name
    Yours,
    Laurenz Albe

  • How Connect Oracle Forms 6 With Database 11g R2

    Hello every one:
    I'm Have application made by Forms 6 and Oracle 10g, now i'm make upgrade to my DB to 11G
    but have problem when make connection between Forms 6 and 11g
    ORA-02248: invalid option for ALTER SESSION
    pls help me !!
    Thnx

    Oracle Forms 6i is not certified with Oracle RDBMS 11g and the last I read - there was no plans to certify Forms 6i with RDBMS 11g. If you search the Forums you can find some workarounds to make Forms 6i work with RDBMS 11g, but these are not Oracle Supported workarounds.
    Your only real options are to leave things as they are or upgrade both your Forms application and the database. If you opt to upgrade your Forms application, you need to upgrade your Forms application to at least Forms 10g R2 (10.1.2.0.2) to be supported.
    Craig...
    Edited by: CraigB on Jul 12, 2010 4:06 PM

  • How to connect oracle forms 10g with oracle 10g express database?

    Hi all,
    I have downloaded and installed oracle forms 10g and oracle database 10g express, when I open net configuration assistant to test local net service, I tested the default service (EXTPROC_CONNECTION_DATA) BUT THE RESULT IS "ora-28547 connection to server failed probable oracle net admin error"
    How can I solve this issue?
    My tnsname.ora is located in c:\DevSuiteHome\network\admin\tnsnames.ora, and its contents is:
    # tnsnames.ora Network Configuration File: c:\DevSuiteHome\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = nour-pc)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = PLSExtProc)
    Edited by: user10228498 on Jan 21, 2011 11:37 PM

    I copied the contents of C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\tnsnames.ora and appended it to C:\DevSuiteHome\NETWORK\ADMIN\tnsnames.ora
    and tried net configuration management to test local net service, the test was ok, thus the first problem resolved.
    but the login problem in forms developer still exist and it claims that: ora-12154 tns could not resolve the connect identifier specified.
    any ideas?

  • How to connect Oracle Form Builder - Oracle Developer Suite 10g - Windows 7

    Hi brothers and sisters,
    Hope all you are fine. I have installed Oracle Developer Suite 10g on Windows 7 successfully and it is working properly. But when I connect to Oracle Form Builder using Connect window asking:
    a. User Name
    b. Password
    c. Database
    a message box appear: 'ORA-12154: TNS:could not resolve the connect identifier specified'
    I verify my Connect String with: 'SELECT * FROM v$database', but the problem remain the same.
    Please help me how can I connect to Oracle Form Builder.
    Noor

    hi
    plz use Net Configuration Assistant or set tnsnames.ora with connect string and computer name.
    Net Configuration Assistant.
    when its opened then go to .
    *Local Net Service Name Configuration.
    *Click Next.
    *Add.
    *Click Next.
    * Service Name--Type here connect String which is XE or any Connect String.
    *TCP.
    *Click Next.
    *Host Name--Enter here Computer name or Ip address.
    *Yes,Perform a test.
    you can enter correct password and username here.
    Note:- your Database should be Up if its not Up it will through the same error so plz startup your database first.
    sarah

  • How to connect oracle with ms access database

    Dear
    We are on release r12, right now we have requirement to connect oracle database with ms access to get some information. We have found gateway(Heterogeneous services) using ODBC, but at the database side where is installed oracle r12 there is no installed ms access software becuse of linux operating system, so how could it will connect ms access because without installing ms-access we are unable to find ms ODBC gateway in ODBC driver under the control panel.
    Can any body guide me how could achieve this
    Edited by: oracle0282 on Sep 21, 2011 12:47 AM

    If I understand you correctly you want to access Oracle on Linux from MS-Access (possible on Windows only). You need neither a gateway nor Heterogeneous Services, but an Oracle client including ODBC driver (Instant client with ODBC driver is enough) on the Windows machine.
    Configure the ODBC driver with the connect informations to the Oracle server.
    Werner

  • How to convert Oracle Forms 11g module to XML

    Hi All,
    I have developed few modules using Oracle Forms 11gR2 builder.I would like to convert these modules to XML(for comparing).Can someone let me know the process to do so in Forms 11g?
    Thanks in advance.

    Did you search first ?https://forums.oracle.com/forums/search.jspa?threadID=&q=form+fmb+xml&objID=f82&dateRange=all&userID=&numResults=15&rankBy=10001
    For all the free help the least you could do is be fair to people who try to help you..
    >
    Handle:      user772007
    Status Level:      Newbie
    Registered:      Sep 16, 2010
    Total Posts:      8
    Total Questions:      6 (6 unresolved)

  • How to Connect Oracle Developer to Other Databases

    Hello I am using Developer 6i.
    Want to connect this to another Database like Ms.Access or Ms.Sql Server.
    Send me how to USE OCA,
    I tried hard but Not Success

    hi
    plz use Net Configuration Assistant or set tnsnames.ora with connect string and computer name.
    Net Configuration Assistant.
    when its opened then go to .
    *Local Net Service Name Configuration.
    *Click Next.
    *Add.
    *Click Next.
    * Service Name--Type here connect String which is XE or any Connect String.
    *TCP.
    *Click Next.
    *Host Name--Enter here Computer name or Ip address.
    *Yes,Perform a test.
    you can enter correct password and username here.
    Note:- your Database should be Up if its not Up it will through the same error so plz startup your database first.
    sarah

  • How to access Oracle forms 11g application through IE 10 Browser

    Hi There,
    Application Server Forms and Reports 11.2.0.2 is deployed on weblogic server on OS windows 7.
    How to access my application through IE 10 where OS Wondows 8?
    Regards,
    Asik

    does it work with firefox or chrome?
    You will find out you deeply have to know formsweb.cfg
    However, ie 10 in general with oracle is not a good plan. E.g.:
    jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
    I hear ie10 is being deployed to windows 7 and and ie11 is in the works.
    which is why I say, oracle needs to develop their own program for launching forms. It doesn't have to be
    full featured browser, just enough to run forms. Hint hint hint: you can get the source code of firefox, change it
    and compile it. (remove their logos and so on.)

  • How to connect oracle form6i or 10g to mysql database

    can anyone tell me how to connect oracle forms to mysql database using ODBC connector?
    akin

    Hi
    this is step by step installation guide
    http://download.oracle.com/docs/cd/E11882_01/install.112/e10875/toc.htm
    also below link for download
    http://www.oracle.com/technology/software/products/database/index.html
    hope this helps
    Zekeriya

  • CONNECTING ORACLE 9I OR 10G DATABASE WITH ORACLE 10G FORMS AND REPORTS

    pls tell how to connect oracle 9i or 10g database with oracle developer suite 10g . though the forms are getting connected but not running with error as
    FRM-10142 the HTTP listner is not running on pls start the listner or check your runtime preferences.
    now pls tell how to start listner and how to chage runtime preferences.
    though i have worked with oracle 9i and forms 6i where we used to copy the tnsnames.ora from network/admin of oracle to forms 6i tnsnames.ora.
    thank you, you may be thinking such a long question.....

    sir
    By server i mean the computer where oc4j and backend database are running is one one of the client pc not a dedicated server..., these database and 10g dev suite are installed in one of the client machine,
    all the clients are using same internet explorer as browser.
    no message is being displyed on some of the client machine where these forms are not being uploaded on browser instead it displays as done in status bar without actually showing anything at all...
    sir so far as jinitiator or JRE is concered i have seen on the client machine (where my forms are running on internet explorer) a pop up is displyed telling one activex control is required to run this program and click to install it..
    after clicking it download jinitiator from server and after installing jinitiator my forms are loaded and start functioning...
    what i feel is as i said this machine where oc4j and database is running is one of the client machine so some other clients do not have acess to this machine, so this might be the reason why those clints are not able to run the said forms on the internet explorer.... can it be so... kindly tell..
    thank you for your patience for reading the question

  • Showing Blank Records oracle forms 11g

    Deal all..
    i am using oracle forms 11g ,  i created a form by using data block wizard & layout wizard  , but when i run the form, the form running successfully  in  browser,  url is (  http://arun-pc:9001/forms/frmservlet), but  it is showing empty records.
    when i check with sql  plus user Scott ,  i found 10 records in departments table ,  same user and same table  i used in oracle forms.
    i don't know what is the  problem.. i am new to oracle forms please help me..
    i am waiting 4r your valuable reply
    thank s in Advance..

    Hello. Mr.harsh shah...
    Thank u for your reply..
    I follow the link what u given in above post..  But still i have the same issue..  i am not sure, but   i think i have problem with my Environment, bcz in many blogs i read that oracle forms is not recommended to use with 64 bit OS. and second , iam not using developer suite 10g,
    currently i am using,
    operating system:  windows server 2008 r2
    weblogic server :-  wls1036 (64bit)
    JDK :- 7u17 64bit
    Oracle forms :-  11g
    and database in another host , just i edit tnsnames.ora file in forms directory.  the following are my configuration options
    Oracle Forms and Reports Installation
    Configuration Options
      Middleware Home Location: C:\Oracle\Middleware
      Oracle Home Location: C:\Oracle\Middleware\Oracle_FRHome1
      Oracle Instance Location: C:\Oracle\Middleware\asinst_1
      Oracle Instance: asinst_1
      Domain Option: Create Domain
      Domain Name: ClassicDomain
      Domain Home: C:\Oracle\Middleware\user_projects\domains\ClassicDomain
      Domain Host Name: WIN-DMJUC51KRHF
      Domain Port No: 7001
      User Name: weblogic
      Automatic Port Detection: true
      Administrator Console: http://WIN-DMJUC51KRHF:7001/console
      EM Console: http://WIN-DMJUC51KRHF:7001/em
      EMAgent URL: http://WIN-DMJUC51KRHF:5155/emd/main
      Forms URL: http://WIN-DMJUC51KRHF:8888/forms/frmservlet
      Reports URL: http://WIN-DMJUC51KRHF:8888/reports/rwservlet
    i check all the links above, all services showing running successfully..  but when i run the form , i dont fine any records , showing empty and blank records..
    please give me clarification ...
    Thank u very much..
    Arun

  • Connecting user Oracle 10g to oracle Forms 11g

    hi all , please i need help :
    my problem is : i have created new user and the tables with oracle database 10g express edition , my problem now is how to connect with oracle Forms 11g to connect with this user and the tables . where i should copie "tsnames.ora" ?? how to modifie tsnames.ora ?? if you have any tutorials or video send to me please . thank's all

    Be aware that the Express editions are not supported for use with Forms.
    As for the tnsnames.ora, for Forms 11, this can be found in the INSTANCE_HOME\config

  • Is it Possible to connect oracle 10g with oracle forms 11g?

    Hi,
       I have installed Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 and Oracle 11g forms and reports....
    My question is
    Whether i can develop application using oracle forms 11g and using oracle 10g as backend connection......
    If Possible then how to configure it......
    Thanks.

    That would depend on the exact version of Forms 11g you are referring to;
    this document: http://www.oracle.com/technetwork/developer-tools/forms/oracle-forms-111210certmatrix-1886127.xls
    is for forms 11.1.2.1 and indicates database 10.2.0.4 is certified with this version of forms. For other Forms versions this might be different (I don't know as I didn't look it up).
    You whould do the SQL*Net config like you'd do it on any other oracle client:
    Tnsnames.ora - Oracle FAQ
    Sqlnet.ora - Oracle FAQ
    except for reports where in the opmn.xml the TNS_ADMIN variable is set for the reports servers; so you'd have to place your config files under $INSTANCE_HOME/config as well.
    TNS ADMIN - Oracle FAQ
    cheers

Maybe you are looking for