How to connect PI to ECC

Hi all!
I have to connect PI to ECC system.
Do you know any link to guide me?
Thaks in advance!

Hi Matias,
Do the settings as mentioned in this thread:
http://www.mypigenie.com/xi-functionality/administration/133
Regards,
---Satish

Similar Messages

How to Connect to Remote ECC 5.0 System from EP ?

Hi,
We are using EP6.0 - located in India, and our client ECC5.0 System is in US. Can anyone please let me know the steps how to connect to Remote ECC 5.0 System?.
Thanks in advance.
Krishna Kumar J

Hi,
Finally we have successfully got connected the ECC 5.0 system which is located in the remote network thru VPN Connection using the same connecting procedure for the local R/3 System.
Thanks & Regards
Krishna Kumar

How to connect an non-hana-ewm with an Hana-ECC and vice versa

Hello,
for our migration project planning I am wondering how to connect EWM on SAP with ECC on Hana and vice versa.
As it is, both systems are (productive) on non - hana with actual SAP-Release and have to be migrated.
The background of my question: we may be not able do the "big bang" thing to migrate ERP ECC607 and EWM (with special Add-Ons) at one point to Hana (DMO) and therefore may need an interim solution. I checked ETL and LTS as "connectors" but they - from my point of view - are one-way solutions from EWM to ECC/Hana -not bidirectional.I Found some questions concerning the same theme in the net but no solution at all till now..
How about BODS ? (Didnt work with it yet)
Best regards,
Ronald

Great. So I have to either install OS X, or buy a new mcahine. Can OS X run on a G3 without grinding to a halt?
By the way, I cannot get the iPod to even mount when connected via firewire. The USB/firewire PCMCIA card does not have drivers for OS 9. I thought that this support was built into OS 9. The USB port works (although the iPod will not mount when connected via USB either). Any ideas?
Thanks

How to connect one ECC 6.0 system to two BW ssytems.

Hello all,
I am trying to connect one ECC 6.0 systems to two different BW systems. The BW systems have two different logic names.
I tried to find an answer in the threads , but could not able to find the steps. they were talking about the notes which fixes for the deltas. but I am not even able to connect the systems at all to implement that notes.
Please give me the steps how to connect to an another BW2 system. The connection between ECC and BW1 ia working fine.
Thanks,

The error message is .
Source system cannot use any of the proposed connection names
Message no. RSAR362
Diagnosis
Every connection to a source system is named using a unique two-digit identifier. Source system LOGTST100 does not accept any of the proposed values.
The last proposed value was BB.
System Response
Source system has not been connected.
Procedure
If you want to recreate the source system from BI information, then you can only use a single value, namely BB, because the connection already has this name in BI.
Delete the existing connections in the source system or contact a BI consultant.

How to connect ECC 5.0 system from EP?

Hi
I want to connect ECC 5.0 system, which is located in a remote SLD, from EP 6.0.
If anyone knows, please post the step by step details .
Thanks and Regards,
Abdul Kareem.S

Hello Abdul,
This should help you
How to connect IDES ECC 5.0 to EP ?
Also check
http://help.sap.com/saphelp_nw04/helpdata/en/77/931440a1c32402e10000000a1550b0/frameset.htm
regards
Mahesh

How to connect from bw system ecc system.

how to connect from bw system ecc system.

Solution
Maintain the entry using the following path:
Call Administrator workbench (transaction RSA1).
From the 'Settings' menu, select Global Settings'.
If an entry already exists in the field "BW user for ALE", delete this.
Enter the correct names for the BW users in this field.
Save the entry.
You must restart the Administrator Workbench (RSA1) now.
The source system can now be linked without errors.
hope this helps.

How To Connect Portal to a new migrated ERP (ECC) Backend

We are currently running ERP 2005 (ECC 6) on UNIX/Oracle platform. Our corresponding NW2004s Portal (on Windows 2003 Enterprise/MSSQL 2005) is currently pointing to this system. We plan to migrate (with the help of a certified migration specialist) the backend ERP2005 system to the new Windows 2003 Enterprise running MSSQL 2005.
To those who has done this before, what do I need to do to make sure the Portal will connect and functional properly with the new ERP 2005 system?

Hi Bill,
For connectivity for the ECC backend you have to make system object.For step bye step setting please see the below link
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/connecttoCRMSystemthroughEnterprisePortal7.0UsingaIView&
Kindly let me know if you need any help or any docs for EP.
Thanks
Regards
Santosh
Reward if helpful !!!

RFC connection BI and ECC 6.0

Hi
I am trying to connect BI and ECC 6.0 at home on two different virtual machines for data extraction and practicing delta management ( they are on the same virtual network).
I am following these steps :
Step-by-step procedure to connect BI with ECCu2026
Define the logical system in R/3 using the transaction code SALE in both the systems (ECC and BI)
Assign Logical System to a client using transaction code SCC4 in both the systems (ECC and BI)
Setup the RFC Destination using transaction code SM59 in both the systems (ECC and BI)
Hit Transaction BD64 and Click Create model view - Enter the Short text u2013 Enter the Technical name u2013 Hit Execute - Distribution Model will be created and the technical name of the distribution model will be listed
Place the cursor on model created and and click Add message type button on the top right corner
Enter sender and receiver system IDs and select the correct message type assigned to the correct system
Distribute this model using Edit u2013 Model View u2013 Distribute
Select the receiver of the model view and proceed to distribute the model
Please note that the distribution of data model is not required to repeat in BI system as this step automatically replicates settings in BI
You have to generate partner profile for each system with which your system communicate using BD82
Outbound records are created in the partner profile for each outgoing message and inbound records are created for each incoming messages
You can view the partner profiles generated using the transaction code WE20
Message Types:
RSRQST: This message type is send by BI to R/3 while loading any data. This gives information about the data source, selection condition and other BI settings to R/3. As and when a load is started in BI, RSRQST message type is sent to R/3 requesting for data.
RSINFO: Once R/3 receives RSRQST message from BI, it sends an acknowledgment message type to BI informing about the status of the request. That is whether the request can be handled or not by R/3. It also gives information about how many data packages are being send and what is the total number of records extracted for the given data source and selection.
RSSEND: After sending a positive acknowledgement to BI, R/3 starts the extraction job and starts collecting data in data IDocs. This message type carries the actual data with it into the BI system.
My question is that : Do i know need to create three model views for these three message types?? Are these steps sufficient?
Please let me know if some other things needs to be followed or U know more simpler way to RFC connect so that I can pull data from ECC into BI and practice delta management.
Thanks
Edited by: max.sap on Apr 28, 2011 8:24 AM

Hi Niru,
Have you created a
[RFC destination in NW Administrator?|http://help.sap.com/saphelp_nwce10/helpdata/en/5a/97a066223e440b8ead3da027b17d9e/frameset.htm]. Have you created a [BI System connection?|http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm]
Best regards,
Dharmi

How to connect to multiple backend systems to IMS

Hi,
I want to connect multiple backend system to SRM IMS.How to connect multiple backend system.
Thanks in advance
Regards
Nitin Amritkar

Hi
see page 63. it is possible.
define backend systems in spro and record all your ecc systems and create a distribution model fpr bbpiv message in srm and distibute to all backend systems.
http://www.portal.state.pa.us/portal/server.pt/gateway/PTARGS_0_160867_305341_0_0_18/2006_05_26_srm_007.pdf
br
muthu

How to configure APO in ECC 6.0..

Hi Experts,
Please anyone explain me how to configure APO with ECC 6.0.
what are all the prereqistic needed to activate APO in ECC 6.0.
thanks in advance.
Regards
Pradeep

if you download the bestpractices guide for SCM you will be able to see the section on Setup for Integration between SCM and ECC
http://help.sap.com/bp_scmv150/index.htm
B02 - connectivity might be a good document to start with

How to connect Forms 5.0.6.0.8 to Oracle 8i?

Please somebody let me know the step by step procedure to create the connection of Developer 2000 Forms 5.0.6.0.8 with the local database(Client & Server both same machine)'
I managed to connect to the database using 'SQL Net 8 Easy Config'.
My problem is with 'SQL Net easy config'
Although I make a connection with 'SQL Net easy config', when the machine restarts It gives the error 'STRTDB80.EXE has encountered a problem and needs to close. We are sorry for the inconvenience'
My Operating System is Windows XP Professional 2003.
I had been trying hard to correct this problem for the past 3 weeks. Please, Please somebody help me with this.
I'm new to Oracle.
Thanks,
Sujeevanie

Hello Abdul,
This should help you
How to connect IDES ECC 5.0 to EP ?
Also check
http://help.sap.com/saphelp_nw04/helpdata/en/77/931440a1c32402e10000000a1550b0/frameset.htm
regards
Mahesh

2 system PLM setup question - Connecting to another ECC system for master data

I have been tasked with setting up the latest version of PLM in our environment. We have a free standing PLM Server (ECC 6.0 EHP7, SP2 with PLMWUI 747, SP3) that we would like to connect to another ECC system (ECC 6.0 EHP5, SP4 with PLMWUI 701, SP4) for its master data. In trolling around google and the marketplace, there isn't any setup guide or anything that really explains what the options are. Does anyone know what the possible setup options are or even better provide links to documents that show how to set this up? Can PLM be setup in the way that we want it to be?
Thanks in advance.

Hello Steve,
Unfortunately there isn't a lot of PLM documentation available.
I'm not sure I really understand what you need, but in essence, the PLM framework was developed using the SPI technology. That is, the Service Provider Infrastructure, which is a technology to split the UI from the business logic behind it. The idea is, in the end, you can have one single DB, connected to multiple systems and different types of UIs. (you can find some more details here: http://wiki.scn.sap.com/wiki/display/SPI/Home)
As far as I know, you have to do some customization in SPRO and maintain views /PLMB/V_RFC_DEST and /PLMB/V_RFC_LSYS. Everything else is done by the PLM framework via RFC connections.
Hope this helps you...
Tudor

How to connect my friends apple notebook through video call

HOW TO CONNECT TO A FRIEND WHO IS USING APPLE NOTEBOOK FROM MY IMAC SUGGEST ME WAITING FOR A SOLUTION FROM APPLE TEAM SUPPORT

Hi,
Typing in all upper case is regarded and shouting here.
Presumably as you have posted in the OS X 10.7.x (Lion) area you are running this version of the OS on your iMac.
This will have iChat 6 on it.
This can use AIM, Jabber and Yahoo IDs within the app.
Apple IDS ending in @mac.com and iCloud issued @me.com and @icloud.com are also Valid AIM Screen Names.
If you use Googlemail and Enable "talk" in the products there you can then use your Google Mail ID as a Jabber ID (although it has it's own Add Account option in iChat)
Facebook has an option to Enable "Chat" which will give you a Chat ID variant on your name there and this can be used in iChat (or Messages) as a Jabber ID.
The Yahoo Account will only do Text chats.
It also has to be an actual ID registered at Yahoo.
Chats are then AIM to AIM or Jabber to Jabber or Yahoo to Yahoo.
So your Buddy will also need a suitable ID or Screen Name for the relevant service.
8:16 pm Sunday; January 19, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
Check your MacBook Pro model year against the list in this Apple tech note:
About Mini DisplayPort to HDMI adapters
Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

I need to know how to connect my macbook to the tv

I ordered the mini dvi adapter for my macbook 13in and obviously it connects to the computer but i have no idea how it connects to the tv. Where does it go? and do i need something else to help connect it to the tv? I am really confused please help.

Yep, Apple makes adaptors to go from the mini DVI on the macbook to almost any type of input that you TV will have. First check the back of your tube to find out what kind of input it has, and order the appropriate adaptor.
Luck
E

How to connect PI to ECC

Similar Messages

Maybe you are looking for