How to Connect Pioneer VSX-710s Multi- Channel Receiver,Toshiba 27A44 and QIP2500

I have an area that I am setting up for grandkids to relax and I need help in connecting the subject equipment together. If there is someone who is experienced with setting up different configurations, I would appreciate any help. I can get the cable sound coming through my speakers but no video.

If you have sounds coming out of your Pioneer speakers, then your audio connection is correct. You need to have another cord for a video connection going from the 2500 to your TV. The most common connections are a yellow composite cable or a coaxial cord. Once its physically connection, you need to change your TV's input to match whatever cord you used.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Similar Messages

  • How to connect an non-hana-ewm with an Hana-ECC and vice versa

    Hello,
    for our migration project planning I am wondering how to connect EWM on SAP with ECC on Hana and vice versa.
    As it is, both systems are (productive) on non - hana with actual SAP-Release and have to be migrated.
    The background of my question: we may be not able do the "big bang" thing to migrate ERP ECC607 and EWM (with special Add-Ons) at one point to Hana (DMO) and therefore may need an interim solution. I checked ETL and LTS as "connectors" but they - from my point of view -  are one-way solutions from EWM to ECC/Hana -not bidirectional.I Found some questions concerning the same theme in the net but no solution at all till now..
    How about BODS ? (Didnt work with it yet)
    Best regards,
       Ronald

    Great. So I have to either install OS X, or buy a new mcahine. Can OS X run on a G3 without grinding to a halt?
    By the way, I cannot get the iPod to even mount when connected via firewire. The USB/firewire PCMCIA card does not have drivers for OS 9. I thought that this support was built into OS 9. The USB port works (although the iPod will not mount when connected via USB either). Any ideas?
    Thanks

  • Yamaha 665 multi channel receiver will not recognize subwoofer

    I am connected to Time Warner Cable and ps3 w/ hdmi   sub woofer is working and has power.  I have checked every setting.......brand new cable
    What do the settings on each connected device have to be set at. 
    I went back to American with the sub woofer and tested it on their system and it worked.  Their answer:  Something is set wrong.
    That is all I know   I am the writing vessel....The system belongs to other members of my family

    You have to dial into each device's input via your receiver.  For example, if your Time Warner box is on HDMI 1 (and that's the device you're trying to use at the time), adjust the receiver's input to HDMI 1 as well, or the surround sound won't work with that component.  This is the easiest way I can explain it ... the tricky part may be finding the input (or sometimes it's called source) button on your receiver.  To check which input each of your devices is connected to on your TV, use your TV remote and press the input or source button (usually under the last row of numbers).  Doing this should either populate an input menu, or automatically toggle to the next input.
    Nothing I post is an official statment of Best Buy or Geek Squad, it is only a helpful opinion!

  • Audigy digital out to pioneer vsx-1015 A/V receiver/amplif

    Hello, I have audigy 2, it has the digital out 3.5mm streo connector, when I connect it with 3.5mm stereo plug - > RCA chord, and the RCA plug into my amplifier, it produces no sound at all. I have set audigy to pass through mode, but nothing happens? Do I need to change my audiocard to get SPDIF correctly out? I read somewhere that it doesn?t matter if the 3.5mm plug is stereo or mono, or does it's

    Do I need this kind of adapter: http://www.bdog.fi/cgi-bin/netstore/...=0887500004423 (sorry in finnish, but you get the point) to convert digital out to RCA spdif?

  • Multi channel design issue - sockets and threads

    How are multiple channels handled in a chat program? Does the server separate the channels by having a port open for each channel, or is it done some other way?
    Thanks

    Yes it is possible. A user is logged on as long as the applet has a socket connection that has passed the login phase.
    Keep a server on the web site that handles the chat stuff. If you want to show some statistics like the users logged on, you can access the server from your local web site and ask him what's going on.
    You can do this with an administrative command set (your statistics module has to login to the server just like a chatter), with a special tcp port or with thread communication. In the latter case server and servlet would have to reside in the same JVM which is not really trivial...
    Another approach is to write the statistics into a shared file, and read this file from your web server.
    -- Stephan

  • How to connect hp pavilion dv2000 to digital TV with HDMI and S-video

    I have this HP computer and digital tv panosonic viera 2007  plasma. and i have the cable with one end of VGA and one end of HDMI. I plugged them and try to find input from TV but it did not work. How could I connect them so I could use TV as a bigger monitor.
    thanks

    Hi,
    There are many around, the following one also has audio option:
        http://www.cablechick.com.au/cables/vga-35mm-stereo-audio-to-hdmi-converter.html?gclid=CKGt85eygMICF...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to connect a EE 4G HUAWEI E5776 to Airport network and share connection

    Help Please!
    We live in a rural area with poor <6MBS down <1MBS Up Broadband. I have purchased a Huawei E5776 on EE in the UK and can get 16MBS down and about 14mps up.
    Now my problem, large house with 1 Aiport Base Station and 3 Express repeaters share the network around the house. Does anybody know how I can get the Huawei on the wireless network so it can be repeated and used throughout the house? PS I also use 3 Apple TV V2 and various other internet devices.
    Many thanks for any help I have tried all I know and guess it might be down to correct use of IP address and router address but as of now Im stuck. Please keep it to the level of advanced amater not IP professional!
    J

    You would need to connect the wireless modem to a Mac equipped with Ethernet and share the WWAN connection over Ethernet.
    OS X Mavericks: Share your Internet connection
    Connect the Ethernet port to the WAN port on the base station. Configure the base station in bridge mode.
    AirPort Utility 6.x: Set up a base station or AirPort Time Capsule as a bridge

  • How to connect a tv numeric box to my toshiba videoprojecteur ?

    I want to join a peritel tv output , to a svideo or a yuv input.
    with the standard connectique, composite is ok (but bad quality) and svideo is black and white.

    Hi Jef
    In my opinion this is a wrong place for your question. Here you can find mostly discussion about notebooks. Try to contact support for video projectors.
    http://www.pvp.toshiba.co.uk/consumer/projectors/home.nsf/pages/contact?opendocument

  • How to connect my ipod to a dvd receiver system

    I am trying to connect my ipod touch to my dvd receiver but I cannot get any sound?? Do I need to change my settings on my ipod?

    hi Michel,
    Do not forget that you need to put the Livebox in "association" mode otherwise you will not succeed in connecting to your wifi network. (sur les Livebox Inventel, il faut appuyer sur le bouton "1" se trouvant à l'arrière. sur les Livebox Sagem, c'est un bouton à enfoncer près de la prise d'alimentation). The Livebox remains in "association" mode for 10 minutes, this gives you enough time to enter your WEP key..
    Plus d'info sur le mode d'emploi de ta Livebox.
    Bye,
    /Phil

  • Does anyone how to connect the iphone5 to an audio receiver

    Does anyone know why I can connect my ipod to my receiver using the rca cables and the headphone adapter, yet I cannot do the same thing for the iphone 5?  I have confirmed that the iphone 5 works fine when listening via headphones or simply using the phone's external speaker.  Maybe I need a special cord?  Did something change between the old apple products and the new iphone 5?  Thanks in advance.
    Victoria

    I use a pre iPhone 5 Bose headphones with a normal 3.5mm jack plug on my 5
    and works perfectly so there is no mechanical reason why your cable doesn't work
    As kappy says any 3.5mm stereo jack plug will work

  • How to I get my iPad to not receive text messages and apps from my iPhone?

    After doing the new software update on my phone, computer, and Ipad my Ipad has been linked directly to my phone. I have changed all setting so that it wont share of communicate but in the update process all saved data was removed from my IPAD I went back to Itunes and after the update to that all the backed up information was gone and the cloud didnt have any backed up information in it from the issues they had with the cloud in August. How do I get my Ipad to disconnect from my phone that it wont recieve text messages or anything else associated with my phone?

    You are probably going to have to sign out of/turn off Messages on the phone and the iPad and then start all over again and enable messages on the phone first so that the number is accessible again to use on the iPad in Settings>Messages>Send and Receive at>You can be reached by iMessages at. You need to be able to select your phone number in there.
    This kb article explains it in detail.
    http://support.apple.com/kb/HT5538

  • How to building a multi-channels analog output task in visual c++ 6.0 (without Measurement Studio)?

    Hello!
     I have a PCI 6251 card, and using DAQmx C function to generate a wavwform. (single channel ).
    But, how to creating a multi-channels analog output task, and had a different frequence in each channels?
    Thanks.

    This is getting to be a common question!
    The answer is, you can't.
    If the rates have common factors, you can use a higher overall rate. The slower waveform will simply have extra points in it to make up for the higher update rate.
    John Weeks
    WaveMetrics, Inc.
    Phone (503) 620-3001
    Fax (503) 620-6754
    www.wavemetrics.com

  • How to connect dual channel ram on a msi 865pe neo-2 plat.edition ?

    hi....
    can any one tell me how to connect the RAM as dual channel on the MSI 865PE Neo-2 p Platinum Edition ?
    i did like what is written in the manual but nothing happened it only works as a single channel....
    the RAm is 2x512 spectek DDR400 PC3200....
    pls help me.............

    Franknputer is right.
    All systems that I build for my gamers runs in Dual Channel and the combo is 1 + 3 or 2 + 4 or 1 + 2 + 3 + 4. 1 x RAM in Channel A and 1 x RAM in Channel B minimum will give your Dual Channel Linear Mode message during startup and you know that you are running Dual Channel.
    Next, it is always recommended to have the same make and model and capacity of the RAMs if you want to run in Dual Channel.

  • How to connect my iphone to tv

    Hi ,
    I have an apple tv and don't know how to connect iphone to tv by this?

    The ATV and iphone must both connect to a wireless router. They do not connect directly to each other..
    Just make sure they are connected to the network and you should then be able to connect.

  • How to connect sun solaris 10 on sparc to the internet?

    hello all. i don't know anything about sun solaris 10.
    after installing sun solaris 10 into my sparc pc, i need to register it through internet.
    but i don't know how to connect to internet through LAN at my campus. =(
    Please help me & give me details how to connect to internet?

    Go to docs.sun.com and get the "system administration guide: IP services". This will give you info on how to configure the network card and tcp/ip config files. Since you just installed this, you must have told the install process that the system was not connected to the network, otherwise it would have asked you for name service, hostname, etc. and configured this info for you.
    First you need to get info from your network/lan admin on an ip address, netmask, gateway, NIS/NIS+/DNS server, etc.
    If the LAN uses DHCP, then see the "DHCP" section of the IP Services guide.
    If the LAN uses issued IP addresses, then with the info provided by your network admin in hand, you can do 1.) sys-unconfig to force the system to return to the part of the install where it will ask you for the info and configure it for your -OR- take the info provided and configure the appropriate files specified in the IP Services guide.

Maybe you are looking for

  • Anyone know how I can print a two page weekly view from ical

    Hi there. I'm trying to print (from my ical) a weekly view into a Franklin planner page. i would like to print a week into two (side by side) 5x8 pages. Anyone have any idea? Can the iplanner app do this? Thanks!

  • UOM error in Material master.

    Hi When we log on to Spanish language, we are getting error in material master for Unit of measure, that the unit of measure has not been created in the language ES. But same UOM has configured in EN language and its working fine for material, while

  • Dynamic Text getting messed up

    I have a "Dynamic Text" element called "output_txt".  In my action script code, I have this line: output_txt.text = "I am thinking of a number between 1 and 100"; But what actually gets displayed in that element, after that line runs is: "thinin o  n

  • Audio Interfaces for Classical Music, Firewire 400/800?

    In the near future I will be getting a new MacBook or MacBook Pro, and I am looking to record classical music (brass, solo and ensemble, chamber groups, etc). Is getting the Firewire 800 port necessary or recommended for hooking up to a good audio in

  • Installing windows 7 from a USB Drive(Suit​able for netbooks)

    1. Convert your Setup DVD to an ISO If you only have DVD-based install media, you must first convert this disc to an ISO file. (Remember that you must use the 32-bit version.) Insert the Setup DVD, close the Auto Run window, and then run ImgBurn. In