How to connect printer to virtual computer

How to connect a hp830 printer to a VC running WXP? The same printer works fine on a physical PC, but when I follow directions in the install wizard to "add new printer" within the VC, it comes back "driver not installed" and fails.

The only way to print from a remote source is to save the files locally and print them from there. There are some commercial class printers that will support remote printing, but I don't know the exact models. An alternative way of doing this would be to get a printer that supports ePrint. With ePrint you can print from any source that can send an email, from anywhere in the world. All you have to do is make sure the printer is on and has an active internet connection. Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

  • How to connect printer wireless i dont have wirelee router? my printer is deskjet 4625

     i m unable to connect my printer wireless and generate code for registering at eprint.how to connect printer wireless i dont have wirelee router? my printer is deskjet 4625. please suggest ? i have installed printer on my computer and laptop. computer is having w-7 os and laptop is having w-vista.
                                                      ​      thanks
                                                      ​               p.h.thakur 

    That is not correct sabretooth04,
    The Deskjet Ink Advantage 4625 only support USB or Wi-Fi, it does not provide any Ethernet connectivity and therefore a Wireless router is essential for the web services to work.
    The specifications can be found in here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03149922&tmp_task=prodinfoCategory&cc=us&dlc=en​...
    ichleiben57 - As your printer only support wireless connection you will either need a wireless router, bridging your wired ADSL router with a wireless access point or replacing the printer to a different model which support wired ethernet connection.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • With HP6500A Windows Visa Cable hookup, how to connect printer to network

    With HP6500A all in one Windows Visa cable hookup, how to connect printer to network

    Welcome to the forums @TonyWE
    I understand you are looking to connect your Windows Vista computer, to your network. Below is the guide for you to follow to connect the printer wireless or wired to your network.
    I hope this helps
    Setting Up the Printer Software for a Wired or Wireless Network for the HP Officejet 6500A e-All-in-...
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How to connect to website through computer if i do not use internet through phon's sim

    how to connect to website through computer if i do not use internet through phon's sim

    Connect through wifi.
    Turn off Cellular data through settings __ General __ Network __ Cellular Data on/off

  • How to connect printer, win laptop, & anroid phone through router

    Without knowing the specifics.
    Cloud Print.
    http://www.google.com/cloudprint/learn/
    

    How to connect printer, win laptop, & android phone through router
    This topic first appeared in the Spiceworks Community

  • How to connect the two virtual machine .

    I installed VM workstation and created two virtual machine .Please suggest me how to connect them internally each other though vm network editor.I want create RAC Setup for practice.

    NAT is the default adapter type in VirtualBox, which will work in almost any configuration and networking environment. Using the NAT adapter, the host system will establish connections on behalf of the guest OS. NAT requires that the corresponding VM guest adapter uses DHCP and cannot be used to provide any services unless you configure port forwarding (>1024) at the VirtualBox VM NAT adapter.
    Bridged networking is the most transparent adapter type, but requires a physical network adapter on the host OS, which is limited depending on the host system and hardware, e.g. wireless. It also requires that the user understands network and routing restrictions of the host system in case of using the interface to communicate between the host and VM. A combination of host-only and NAT may sometimes be necessary to allow the VM to connect to the internet and allow the host to communicate with the VM guest OS.
    Btw, the host-only adapter IP actually works on behalf of the host OS and can be used to allow the VM to access the host system. So if Internet is not required, the NAT or bridged adapter are not required. I'm not sure if many people realize that, since it's not really mentioned in the documentation. So if you use the host-only adapter, simply use the host-only IP instead of the host system real IP to connect the VM to the host OS.
    I also switched to VirtualBox a couple of years ago, mainly because it provides more VM hardware options, is free and because of the ability to manage multiple virtual machines and group them together. I have about 70 virtual machines for testing and evaluating configured on my home computer. I also like the option in VirtualBox to clone a VM based on a Snapshot.
    VMware provides a Virtual Network Editor in VMware Workstation (KB 1018697), which allows to customize any of the existing virtual network adapter or add new ones. The available technologies under any Type 2 hypervisor are very similar between different products:
    http://www.vmware.com/support/ws45/doc/network_configure_ws.html

  • How to connect to an other computer through the internet

    Please who can help me with Desktop Remote control and connecting through the internet. I know a lot is written about it, but it is still confusing.
    So try to explain my situation:
    I have an MacBook pro with Desktop Remote Control 3
    The other computer:
    Apple PowerBook which is connected through and Thomson Speedtouch (wireless 716)
    External IP address xx.xx.xx.xx
    Internal IP address 192.168.1.66
    No firewalls
    My questions:
    How do I check if my Thomson Speedtouch the ports 5900 and 32?? are open?
    How can I open the ports on the router? Do I have to open the port on the router?
    Then on the MacBook Pro, I start up ARD3
    How do I scan for the computer on Internet? Do I use the external IP address?
    How can I then connect to the Apple PowerBook? I cannot fill in the second internal IP address or do I?
    I hope someone can help me.
    If more info is needed, please ask me.
    Thank you....
    Hans

    Neil thank you for your answer.
    I opened Network Utility. Went to the last Tab "Port Scan"
    I typed in: external IP address (i got this through the Widget SysStat which shows external IP)
    Than I gave up scan between the ports 5890 - 5910 to check if those ports are open or not. I had to way for a moment, and then the result was: "Port Scan has completed....."
    Ok, what do I know know? The ports are open or not?
    So please can someone help me with the following:
    1) What should the result show me from Network utility?
    2) Opening the port, this has to be done on the Router or is it something the Internet Service Provider needs to do?
    3) I still have the question: how can I open the port, so with what application.
    4) What are the exact ports which needs to be open?
    5) About bridging in the router, does that have a special name. I didn't see in the router configuration program an option like that? When searching --> this is configured: A. Router-modem (NAT/PAT) - is there something special with NAT/PAT?
    Hope someone can help me with a few of my questions.
    Thanks

  • HT201269 How to connect Iphone 4 to computer

    How to connect Iphone 4 to computer

    Plug one end of the cable into your computer and the other into your iphone

  • How to connect printer epson l210 to airport express

    How to connect and setup printer epson l210 to airport express

    Hey Love iapd,
    Thanks for the question, and welcome to Apple Support Communities.
    The following article will outline how to set up a printer that may be connected to an AirPort Express.
    OS X Mountain Lion: Set up a printer connected to a Time Capsule or AirPort base station
    http://support.apple.com/kb/PH10875
    Additional information:
    USB printer troubleshooting for AirPort Express, AirPort Extreme, and AirPort Time Capsule
    http://support.apple.com/kb/TS1253
    Thanks,
    Matt M.

  • How to connect printer to wireless connection

    Hpdeskjet3050a all in one printer J611g How do you connect the printer to a wifi signal?

    Hi,
    Please read the following instructions:
       http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02722113&cc=us&dlc=en&lc=en&product=5061082&tmp...
    If you already installed the software, you may find the wireless configuration as follows:
    Click Start, select All Programs, select HP,
    Select Your printer name,
    Select Printer Setup and Software Selection,
    Select eighter Convert a USB connected printer to wireless or Connect a new printer and Follow the onscreen instructions.
    Hope this helps.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Cannot find instructions on how to connect printer to a new wireless network.

    HP 4500 series was connected to my wireless network successfully for a year.  Upon moving and obtaining  new wireless network I cannot find instructions for changing wireless network for printer to recognize.

    Hi,
    Just connect printer to a new Network, like a brand new printer. Here are the manuals (many parts).
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to connect iphone to new computer without having the old one?  The hard drive on my macbook broke, so I had to install a system from scratch. I now cannot reconnect my iPhone. How can I set the new computer without loosing my data on the iPhone?

    Recently the hard drive on my mac book was damaged beyond repair and I had to reinstall the OS.
    MY iPhone still has all its original dta.
    How can I connect my iPhone to my computer (virtually new) without loosing the data I have on my iPhone?
    Obviously I cannot recover any of the old itunes files.
    Thanks,

    Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
    Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
    For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
    - Expod (free) - http://www.headlightsoft.com/expod/ - Mac, universal for 104.+ (newer machines try de-Tune)
    - deTune (free) - http://www.headlightsoft.com/detune/ - Mac, 10.5+
    - Senuti - http://www.fadingred.com/senuti/
    - Phoneview - http://www.ecamm.com/mac/phoneview/
    - MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
    - Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
    - Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
    - iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
    - Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
    - 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
    Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
    Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
    Additional information here https://discussions.apple.com/message/18324797

  • How to connect my E61 with computer using WLAN

    please tell me the full setting of WLAN how i can connect my computer with WLAN

    You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
    iOS: Supported Bluetooth profiles

  • Nokia 1661 - How to connect it to a computer?

    I'm feeling quite stupid.  How does one connect the Nokia 1661 to a computer?  What type of data cable is required?  There is a port between the power jack and headphone jack, but it is smaller than a mini USB connector.  The user manual does not specify what that port is.
    Thanks for the help.

    Absolutely. It is completely closed to the outside world.
    If there was a WAP browser you could put the images online somewhere and point it to them, but even that option isn't there. Nor does the 1661 support user-created ringtones other than those created with the built-in ringtone editor.
    This is a BUDGET phone, folks. If it got any cheaper SIM-free you'd be finding the things in packets of cereal.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • How to connect remotely to a computer running XP professional

    How can I connect remotely to my work computer running XP Professional from my mac book; I'm running tiger on the mac
    Thanks in advance

    Please search the forums before posting, as the topic of sharing files between Mac and Windows computers has been covered dozens of times. It can save you time in the future. Instructions are also already available on your Mac via it's built in Help files accessible from the Help menu. You can also see this article: http://www.ifelix.co.uk/tech/3020.html

Maybe you are looking for

  • Tools to list classes used in the project/

    Hi is there any tool that would list all the classes and packages used in my project. the tools must be something like getting input as a main class and list all the other classes used in the project. ? -- MJ

  • Ternary Operator Question (with regex).

    Hi, I was learning regex in java and wrote a program which tests a string to see if it is an email address. import javax.swing.*; public class IsEmailAddress      public static void main(String[] args)           String address = JOptionPane.showInput

  • Flash CS4/ anti-aliased options

    Does anyone know if there are options to turn off anti-alising when importing Ai files/ text, etc? ~nate

  • Opening JFIleChooser in applet

    Hi, I was clogged up with opening a JFileChooser in an applet. The way i have done is as follows : I have taken a Button and added it to an JApplet.. In the listener class for that button i have written the code for opening the JFileChooser and selec

  • Problems installing Mastersuite CS6

    I've twice downloaded the files for Mastersuite CS6. Each time it says that a restart is imminent - ignore or quit. First time I ignored and it didn't work. I downloaded the files again overnight, with the same error message. I restarted and the file