How to connect printer wireless i dont have wirelee router? my printer is deskjet 4625

i m unable to connect my printer wireless and generate code for registering at eprint.how to connect printer wireless i dont have wirelee router? my printer is deskjet 4625. please suggest ? i have installed printer on my computer and laptop. computer is having w-7 os and laptop is having w-vista.
thanks
p.h.thakur

That is not correct sabretooth04,
The Deskjet Ink Advantage 4625 only support USB or Wi-Fi, it does not provide any Ethernet connectivity and therefore a Wireless router is essential for the web services to work.
The specifications can be found in here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149922&tmp_task=prodinfoCategory&cc=us&dlc=en...
ichleiben57 - As your printer only support wireless connection you will either need a wireless router, bridging your wired ADSL router with a wireless access point or replacing the printer to a different model which support wired ethernet connection.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

How to print wireless? I have a MacBook Pro with Mountain Lion and printer is a Canon MP620

How to print wireless? I have a MacBook Pro with Mountain Lion and printer is a Canon MP620

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp620#Wireless_Help

HT1365 My ipad has trouble staying connected to wireless even though have strong wi fi signal strength. Suggestions on solving the issue?

My iPad had trouble staying connected to wireless even though have strong wi fi signal strength. Could this be an iPad issue or something to do with updates or an adaptor? Appreciate any feedback.
bearjr

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have Windows 7 Operating system and an HP 6500 A Plus printer. My iPad no longer prints wirelessly. An error message says the printer is offline. Suggestions

I have Windows 7 Operating system and an HP 6500 A Plus printer. My iPad no longer prints wirelessly. An error message says the printer is offline. Suggestions?

1. Turn off router, printer and iPad
2. Turn on router and wait 30 seconds
3. Turn on printer and wait 30 seconds
4. Turn on iPad and test printing

I have a 7D but the serial stiker its gone and i need the SN how can i get it (i dont have the box)

i have a 7D but the serial stiker its gone and i need the SN how can i get it (i dont have the box) is there a way to find it on the camera menu?
Solved!
Go to Solution.

The serial number is in the EXIF. Any EXIF reader will display it.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

I have a printer canon mp495 and I'm trying to connect it to my iPad. But my iPad can find it the printer. Do I have to reset the printer or what app do I use?

I have a printer canon mp495 and I'm trying to connect it to my iPad. But my iPad can find it the printer. Do I have to reset the printer or what app do I use?

Printopia is Macintosh-only. <Printopia for Macintosh>
Another program that is available in both PC and Mac versions is FingerPrint. <FingerPrint>
For either program, your computer must be on and awake any time you want to print.
Fred

I found an Iphone on the river and it was pass code locked now it says to connect to itunes i dont have an acct

I found an iphone passcode locked now it says connect to itunes i dont have an acct

the iPhone does not belong to you. Turn it in to the nearest police station in the city or town where you found it.

I use IMAC upstairs connected to the house wifi downstairs where the networked printer is. I have 'found' the network printer on my IMAC settings but when i send to print I am getting a pop-up box which has 'apple' as user name and is asking for password.

I use IMAC upstairs connected to the house wifi downstairs where the networked printer is. I have 'found' the network printer on my IMAC settings but when i send to print I am getting a pop-up box which has 'apple' as user name and is asking for password. I have tried my own IMAC password but to no avail. The printer also shows a pop-up box stating 'awaiting authentication.
Any help appreciated

You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it.

How can I disable wireless admin privileges to the router ?

I am using an Airport Utility for Windows for Airport Extreme. For the sake of better security, how can I disable wireless admin privileges to the router so that the router can only be configured via hardwire connection?

For the sake of better security, how can I disable wireless admin privileges to the router so that the router can only be configured via hardwire connection?
Sorry, but this is not possible.
If you want to limit access to administration of the router, you should change the Base Station password, and only give out that password to those individuals that you want to have access to the administration settings of the router.
The forums have been having problems displaying screenshots, but we will attach one below in the hopes that the problems may be fixed.
Important Note.......even with this, "security" on the AirPort routers is an illusion.......since a one second press on the reset button will give any user 5 minutes of free access to go in and change any settings that they want.
So, you might want to keep any eye on things.

My MacBook Pro recognizes which of my three printers is plugged in (USB), but can it automatically use that printer or do I have to select that printer from the list each time I switch between printers?

My MacBook Pro recognizes which of my three printers is plugged in (USB), but can it automatically use that printer or do I have to select that printer from the list each time I switch between printers?

My MacBook Pro recognizes which of my three printers is plugged in (USB), but can it automatically use that printer or do I have to select that printer from the list each time I switch between printers?

How to connect my wireless printer (HP 1102w) to my ipad2

How to connect my printer (HP 1102w) to my iPad 2?

Firstly, try asking in the iPad forum. This is the iPhone forum.
http://support.apple.com/kb/HT4356?viewlocale=en_US&locale=en_US

How To Connect WRT54GS Wirelessly

I have a WRT54GS router that I want to setup wirelessly with my Windows XP desktop that only has a wireless adapter installed. There is no ethernet port on the pc. I have looked at the Stickys and read the FAQ but still haven't found an answer that clearly states how to setup the router without using an ethernet cable connected to the pc. I want to have the ability to access the web based setup page as well so that I can secure my settings. Any help would be greatly appreciated.
Solved!
Go to Solution.

Generally, it's better to configure the router through a wired connection to be sure you configure your router and not someone else's... Thus if you have any wired ethernet device it's better to use that instead of trying a wireless only setup.
You can set it up only through wireless, however, you should make sure you are connected to your router in the beginning. Easiest test would be to unplug your router from power and check for available wireless networks. If there is still another "linksys" network to be seen, you must be extra careful.
Anyway, then plug your router back into power. Make your computer search for networks and connect to the unsecured "linksys" network. It's best to put the computer close to the router for this to make sure you connect to your router.
Then open the web interface at http://192.168.1.1/ default password should be "admin", no username required.
To be sure it's your router, go to the Status page, check it's really a WRT54GS and check the MAC address you see there. It should be the same as the one printed underneath the WRT (maybe one or two off in the last digit). If it's a completely different MAC address, check the LAN and wireless subtabs and the MAC addresses shown there. If all MAC addresses are completely different, unplug the router from power and see if your computer is still connected to the web interface or not.
Anyway, once you have established it's really the web interface of your router, check the firmware version and on the router and the one available online. It's best to upgrade the firmware before you do the configuration. If you have the latest firmware you have to configure the router. I would recommend the following steps:
1. Go to the Wireless page. Change the SSID to something unique. Save settings.
2. You'll loose the connection. Make your computer search for networks again. You should now see the new unique SSID. Connect to that network and open the web interface again.
3. Next set up wireless security. Enable WPA2 Personal with AES encryption and set a strong passphrase. Save settings. You'll loose the connection again.
4. Now you have to reconnect. Depending on your computer and the software use to configure the wireless you may have to remove the unique SSID first from the list of preferred network before you can reconnect. The computer usually remembers the SSIDs joined before and won't connect if the security settings don't match the one used before. But you have to find that out.
5. As you are still using XP the computer may not support WPA2 or AES encryption (which is the best and strongest you can use today). Thus, if you are absolutely not able to reconnect the computer you will have to reset the router to factory defaults pressing the reset button for 30 seconds and start over. Choose WPA Personal with TKIP and a strong passphrase then. That should work. I would not recommend to use WEP which is easily cracked.
6. Once you have managed to set up your desktop to connect to your secured wireless network you should make one more change: change the default password "admin" on the "Administration" setup page.
7. Remember to clean up the list of preferred wireless networks, in particular, don't forget to remove the "linksys" network from that list. Otherwise your computer may automatically connect to a "linksys" network if one comes available in the proximity.
That should be it.

How to connect Macbook to TV but have reverse picture?

I'm not sure how clear my subject is, but basically here's what I want to do. I know how to connect my macbook to the TV and have my macbook screen show up on my TV screen. I want to reverse that, I want what's on my TV to show up on my mac screen so I can stream the picture on the web. Is this possible to do? What supplies am I looking at getting to be able to do this? I want to be able to broadcast what's on my TV through my mac, but I would also like to be able to work on my mac at the same time. I might be dreaming now right?

I am having a problem with getting my tv to work as the monitor. i have the mini dvi port connected to a RGB input port in the back of my LG tv. Any help you could give me would be appreciated

How to connect the two field which have a diffrent length

Hi,
 i have two table one is VBRP-VGBEL CHAR 10
 second is MKPF-XBLNR CHAR 16
both are same data means vgbel eq xblnr.
how to connect these table because when i connect these table it gives me error
have a same type and length.
please give me reply soon . Thanks.
dinesh

HI
I GOT THE SAME PROBLEM AT THAT TIME I DONE LIKE THIS
I THINK IT MAY HELPFULL FOR YOU
OBJID = 6 CHAR
SOBID = 40 CHAR
I GOT THE SAME ERROR WHAT YOU GET
I NEED ONLY 6 CHAT SO THAT WHY I HAD WROTE THIS LOGIC
1ST I HAD DECLARED THE SAME STRUCTURE TWICE
IN FIRST ONE IT IS NORMAL DECLARATION
IN SECOND ONE I HAD DECLARED THAT 2 FIELDS AS THE SAME LENGTH
I HAD PUT THAT IN THA BOLD LETTERS
AND AFTER THAT I HAD LOOPES THAT WORK AREA AND CONVERTED THAT SZE
REWARD IF USEFULL
TYPES : BEGIN OF ST_HRP1001,
 OTYPE TYPE HRP1001-OTYPE,
 OBJID TYPE HRP1001-OBJID,
 RELAT type hrp1001-RELAT,
 BEGDA TYPE HRP1001-BEGDA,
 ENDDA TYPE HRP1001-ENDDA,
 SCLAS TYPE HRP1001-SCLAS,
 SOBID TYPE HRP1001-SOBID,
 END OF ST_HRP1001.
TYPES : BEGIN OF ST_SOBID,
 OTYPE TYPE HRP1001-OTYPE,
 OBJID TYPE HRP1001-OBJID,
 RELAT type hrp1001-OBJID,
 BEGDA TYPE HRP1001-BEGDA,
 ENDDA TYPE HRP1001-ENDDA,
 SCLAS TYPE HRP1001-SCLAS,
 SOBID TYPE HRP1001-OBJID,
 END OF ST_SOBID.
SELECT OTYPE
 OBJID
 RELAT
 BEGDA
 ENDDA
 SCLAS
 SOBID FROM HRP1001 INTO TABLE IT_HRP1001
 WHERE OTYPE = 'D'
 AND OBJID IN S_OBJID
 AND BEGDA GE DATE-LOW
 AND ENDDA LE DATE-HIGH
 AND ( SCLAS = 'E' OR SCLAS = 'ET' ).
IF SY-SUBRC NE 0.
 MESSAGE 'NO RECORD FOUND FOR THE GIVEN SELECTION CRITERIA ' TYPE 'E'.
ENDIF.
LOOPING TO CONVERT THAT FIELD LENGHT
 LOOP AT IT_HRP1001 INTO WA_HRP1001.
 WA_SOBID-OTYPE = WA_HRP1001-OTYPE.
 WA_SOBID-OBJID = WA_HRP1001-OBJID.
 WA_SOBID-RELAT = WA_HRP1001-RELAT.
 WA_SOBID-BEGDA = WA_HRP1001-BEGDA.
 WA_SOBID-ENDDA = WA_HRP1001-ENDDA.
 WA_SOBID-SCLAS = WA_HRP1001-SCLAS.
 WA_SOBID-SOBID = WA_HRP1001-SOBID.
 APPEND WA_SOBID TO IT_SOBID.
ENDLOOP.
SELECT OTYPE
 OBJID
 AEDTM
 UNAME
 DELET
 CANCR
 NCONT
 FROM HRP1026
 INTO TABLE IT_HRP1026
 FOR ALL ENTRIES IN IT_SOBID
 WHERE OBJID = IT_SOBID-SOBID
 AND ( OTYPE = 'E' OR OTYPE = 'ET' )
 AND DELET = 'X' AND
 BEGDA GE DATE-LOW AND
 ENDDA LE DATE-HIGH.

How to Connect @ startMac OSX PowerBook G4 to a HP 694c printer?

I have the above subject lap top -
I am new & would like info -
I have a HP 694C printer -
I have a USB converter -
Can anyone detail how to get it started & going?
thank you in advance for your reply

Thanks klaus, sorry, new to this support disccussion. Ressed the wrong button... Problem not solved...

How to connect printer wireless i dont have wirelee router? my printer is deskjet 4625

Similar Messages

Maybe you are looking for