How to connect Qosmio G20 to HD Plasma TV

Hi...I'm so confused!!!!....please can someone advise me......Been reading all the posts on this.....What is the best way to Connect G20-139 running Vista Home to a HD Plasma?????........Can i buy a D-video to HDMI cable (searched the net but not sure on what i'm looking for in a cable...LOL).....any help please....i'm no expert!!!!

Hello Pattayamad,
About your question:
Hi...I'm so confused!!!!....please can someone advise me......Been reading all the posts on this.....What is the best way to Connect G20-139 running Vista Home to a HD Plasma?????........
Right now you will not be able to connect your Qosmio g20 to a high definition TV. Not because the Qosmio, but because you are running Windows Vista on it. The actual nvidia drivers are not working properly to enable the Scan progressive output to your Plasma TV. You can use only the Svideo output, which is not so good. Lets wait for the new graphic drivers for the geforce go6600.
Can i buy a D-video to HDMI cable (searched the net but not sure on what i'm looking for in a cable...LOL).....any help please....i'm no expert!!!!
No, there is not a D-video to HDMI available. You can use the D-video to component cable (red, green and blue RCAs) or you can buy the SCART adapter to component, and use the cable supplied with your notebook (D-video to SCART) with this adapter.
but , if you want to output Scan progressive resolutions with the video component cable, you must use the windows media Center 2005 OS. Not working with Vista.
Francisco

Similar Messages

Qosmio G20 VGA in for connecting to XBox 360

How can i connect a Xbox 360 to the qosmio using a VGA HD cable like this?
http://www.xbox.com/en-US/hardware/x/xbox360vgahdcable/
Is it possible to use the fantastic monitor of the Qosmio to play?
Any help apreciated

Mores is right, there is no VGA input on the Qosmio G20 (I wish there was though), you have to use an S-Video connection from your Xbox. Using the Qosmio player works perfectly well, there's no delay at all, the only problem I had was the video quality was utterly terrible. S-Video out from my 360 to a TV was fine, but input into the laptop looked awful, oh well!
Cheers,
Steve

Qosmio G20: How to disable/workaround SCMS-T for adiosyn with bluetooth headphones?

Greetings All,
I've recently purchased a set of bluetooth stereo headphones (Creative CB2350) and found that due to the inclusion of SCMS-T copyright protection I cannot audiosync directly to my laptops bluetooth stack (Qosmio G20). The headphones come with an audio jack adapter (bluetooth transmitter), however it runs on a single AAA battery and cannot last more than about an hour; so I need to connect without this.
Is there any way to disable or workaround the requirement for SCMS-T copyright-protection in the latest toshiba bluetooth stack? and if not why not?! I've paid good money for both my Qosmio and my Headphones and I'm quit infuriated at the deliberate inclusion of software/firmware designed specifically to prevent me from using my hardware for legitimate purposes (i.e. what they were designed to do).
Please Help Me,
Lee ([email protected])
PS: Frankly I didn't have much of a problem with DRM technology before this, but now I can see just how irritating and pointless DRM is; compare the number of people who actually use bluetooth devices for pirating (negligable) to the number of bluetooth headphones that do not support SCMS-T (alot if all my google searchs are anything to go by) and you see just how stupid the whole idea of DRM over bluetooth really is.
In my not so humble opinion big corporations like toshiba should railroaded over converluted pap such as SCMS-T as a matter of recourse; the end user doesn't want to spend several years downloading licenses and scouring the web only to find out his/her hardware is utterly useless. (sorry for the rant but that is how I feel).

Hy there deepblue,
Thanks for responding again.
Initially I had thought that the adapter/transmitter failed due to a dead battery, although I have since confirmed that the battery is not dead, in fact the adapter works fine (at least for a time). It would seem that the adapter simply shuts down at random intervals (it has happened a few times now) and I can't figure out for the life of me why; the adapter is designed to switch-off after 2 minutes of inactivity although each time it (randomly) switches off I have been recieving audio so perhaps there is something wrong with the auto switch-off function? or perhaps the batteries are in the process of dying?
I have can't recall seeing an estimate of battery lifetime for the adapter on the creative product website (that is not to say there isn't one) but the headset has an estimated continuous runtime of up to 8 hours (on its 2xAAA batteries) so I would assume that the adapter can last at least as long (on its 1xAAA battery); if not this amounts to a major design flaw in my opinion. Sadly the adapter doesn't come with an AC adapter, it is only little itself and I assume it would require one heck of a transformer. ;)
Bah, I'll try and get the blasted thing to work reliably over the next week or so and if I have no luck creative can sort it out. It would still be nice to use my headset without the aid of the audio jack, seeing that headset logo on my bluetooth 'radar' screen is a bit of a tease. ;)
Incidentally I have been probing furiously to find a set of bluetooth headphones which support SCMS-T and it would seem there is only one set on the market (by bluetake) and what's more it would seem that the SCMS-T is specifically designed to degrade sound quality (don't know to what extent but regardless this seems like 1 step forward followed by 5 steps back to me) which would seem incompatible with any bluetooth consumer audio products - Toshiba me thinks it is time to lock the proponents of SCMS-T in a cupboard somewhere and get to work on bluetooth stack v5.0. ;)

How to connect my Qosmio F10 to the TV?

Please help!
How do I connect my Qosmio F10 laptop to the TV?

Hi
Did you check your user manual?
There you could find a useful informations and details about your notebook features and how to connect it to the TV!
Check this!
One hint; you have to use the s-video out port ;) then you could connect the TV with the s-video cable.
Bye

How do I connect my Samsung Series 8000 plasma tv to my 27" imac

How do I connect my Samsung Series 8000 plasma tv to my 27" imac (2.8 GHz Intel Core i7) to use as a display?

Here you go (no financial or other interest in this web site or company):
http://www.kanexlive.com/iadapt51
I believe we have the same model of iMac (late 2009) in which unfortunately Apple did not provide audio signals in the mini-DisplayPort out port. This Kanex adapter will pick up your audio as well as the DisplayPort signal and combine them in an HDMI signal that you plug into the Samsung HDTV.

Is it possible to connect satellite dish directly to Qosmio G20?

Hy everyone,
I have a Qosmio G20-PQG21. The receiver is 60 meters away from laptop position. In this case the channel cannot be changed. The problem this person want to change the channels. The problem is quite simple... can i connect the coaxial cable from dish directly to tv tunner and setup the program guide? or do you have another solution for my situation?
Thanks in advance

Hi
In my opinion its not possible to connect the satellite cable directly to the Qosmio.
You cannot also connect the TV directly with the satellite dish. Its the same case on the notebook. You need a sat receiver between the notebook and sat dish.
There are two possibilities:
1.) You will buy a longer cable from the sat dish to the receiver and place the receiver nearer notebook.
2.) You will place the notebook nearer the sat receiver ;)

Connecting to Surround Sound (Qosmio G20)

I am trying to connect my Qosmio G20 to my external surround sound sysytem via an amp.
As far as I know I have connected everything correctly, but I am only getting sound from my left speakers front and rear, no where else.
I have checked the speakers and all the settings I can think of on the laptop, is there something I am not doing in order to send the signal to all the speakers??
Any help is greatly appreciated.
Many Thanks

Hello
Check please this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3665&messageID=12229#12229 . I believe that Quad`s posting will be useful for you.
Good luck!

Qosmio G20: How to get rid of large, green on-screen volume display?

Hi,
I have a Qosmio G20 which i bought in Japan last year and have since changed it over to English operating system and drivers. However one thing ive noticed that is different from the Japanese set up is that everytime i adjust the Volume level using the wheel on the right hand side of the laptop, a large green Volume level display comes up on the screen. I want to get rid of this cos it takes up nearly half of the screen. The Japanese version didnt have this problem.
I checked all the settings in Control Panel and various Properties sections as well but couldnt find anything.
Any suggestions how to remove it? Any other Qosmio users have this on their screen?
Thanks.

OK, here's how the volume bar works in all Media Center (2004-2005) and how to change it :
Create a .txt file with the following :
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Media Center\VolumeDisplay]
"Disable"=dword:00000000
"FontSize"=dword:00000024
"Color"=dword:00ffffff
"Timeout"=dword:000003e8
Don't include the --------
Now here are what the settings do:
Disable: (enable or disable the volume bar)
- 00000000 (bar is shown)
- 00000001 (bar is hidden)
FontSize: (decide the font sized used to display the word "volume")
- 00000024 is font size 36 (it's hexadecimal value), for exemple 00000014 is fontsize 20, etc..
Color: (the color of the control bar and of the word "volume")
00ffffff corresponds to white, 00000000 corresponds to black. also hexadecimal.
If you want an easy way to find out, just check the color you want in HTML:
If HTML is #00AAFF for exemple, then you need to put value 00FFAA00, or for HTML #556677, the value will be 00776655
Timeout: (it represent the duration of displaying the volume bar)
000003e8 corrsponds to 1000 ms = 1 seconde. For exemple, 1,5 second is 000005dc, or 2 second is 000007d0
So replace accordingly the above with the value that you like, save as "bar.reg" then double click on it and reboot the PC!
Enjoy, it was quite a hassle to find those keys because they don't exist initially! (and because for each try, I must reboot.. :/ )
Later,
Alcahest
ps: it works on ALL Qosmio machines ;)

How to see DVB-T on Qosmio G20-129?

Hallo,
I'm new owner of a Qosmio G20-129 with PCI DVB-T/Analog Hybrid Tuner.
I plug antenna cable and I see analog TV.
But : how can I see dvb TV?
thanks
Marco Molinari

Hi
If you use a MCE you need to set up a TV signal. Go to the settings and select general
Then MCE setup and Set up TV Signal.
But not in all regions DVB-T were supported.
Please check also this topic:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=9534&messageID=33554#33554
Bye

Qosmio G20 - Wireless Connection using Thomson 580 Router

Hi,
I am having trouble using the above Wireless router with my laptop. It all works fine with the 'wire' connected (i.e. the ethernet cable) but not without (using the cable defeats the object of having a wirleless router!) However when I remove the cable it does not recognise a connection - any ideas ? (warning: I'm abit of a novice so please treat me gently i.e. not too technical !) In case it is relevant I am in the UK using AOL (but I have checked compatibility with them and they have said the problem lies with my laptop or the router)
Thanks,
Elijah

Hi
Firstly the WLan configuration is very complex and depends on different settings.
The Qosmio G20 works with both WLan standards: 802.11b and 802.11g.
The g standard is faster.
However, its very important to configure the WLan router. Usually you should receive the router manual together with the router. Check the router installation procedure and the WLan options.
On the unit the Wlan card should be enabled. Check the hardware switch on the notebook side and also the key combination FN+F8.
If you use the Windows to configure the Wlan you should enable the option in the WLan properties under Wireless Networks tab.
If you use the WEP encryption you should configure this. If the MAC address filtering is enabled on the router you have to insert the WLan card MAC address in the router table.
But all this information you should find in the router manual. Check it!!!
Good luck

Qosmio G20 - How do I get the tuner to work?

Hi There
I have a Toshiba G20 Qosmio. :) It has windows xp professional installed on it.
I can access the Qosmio Player (pressing the tv button) when the laptop is off. I get a snowy picture.
I donnot have a remote. I am from South Africa.
Can someone help with the following:
- Do I need a remote to tune to a psecific frequency?
- If no, how do I tune to a specific frequency without a remote?
- How do I access the user interface on the Qosmio player?
- Can the Qosmio player be accessed from Windows?
- Is there a guide on how to setup and use the Qosmio player? If yes, please provide download link.
Thanks

Hi
How do you want to watch TV?
What Qosmio player do you have?
As far as I know the Qosmio Player versions 4.3 and older do not support DVB-T signal.
Furthermore Im not quite sure if you would be able to receive the TV channels in South Africa if this Qosmio G20 has been released in European country.
The point is that the internal tuner would not receive the signals due to different PAL/NTSC settings.
Regarding the channel scanning:
Please check this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=25430
In order to run scan you have to start the Qosmio player, press the F1 key and go into setup.
There you can do a scan. You dont need the remote control!
The other fact is that the Qosmio Player is not Windows based applications and you cannot start if from Windows. If Windows is running then you can use the MCE (Media Center) instead of Qosmio player.

Qosmio G20: How to get higher screen resolution on external 22" monitor

I have a Qosmio G20 and today I bought a Samsung 226BW external screen. The Samsung has a max/optimal resolution of 1680x1050px. The Toshiba manual sais the laptop supports an external screen resolution up to 2048x1536 ...
I have now tried all kinds of settings, but the highest resolution I get on the external monitor is 1440x900 (- same as the laptop).
1440x900 on the 22" screen is not enough for serious picture editing; it simply looks unsharp.
What am I doing wrong? I deeply appreciate any answers/feedback; because if 1440x900 is all I can get, I have to take the xternal monitor back to the store ...
if anyone is so kind !?
Espen.

Hi
The available screen resolution depends on the graphic driver. You cannot choose the favorite resolution of 1680x1050 because the graphic card driver doesnt support it.
Maybe a graphic driver update could helps.
By the way; a inf file should be supplied by the monitor manufacture. You can install such file making right click and choosing install.
Check also these forum threads:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19677
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19570&messageID=71767

Qosmio G20-127: How to upgrade the GPU

Hi,
I want to change the video card of my Qosmio G20 - 127 with better one. Can someone tell me, is this possible and what better video card can i use.

Hi
I can tell you that this is not possible because the GPU is always soldered on the board and its not possible to remove it on common way.
So unfortunately but you have o forget this!
Greets

How to find Vista drivers for Qosmio G20?

Hi All...
Has anyone managed to get qosmio g20 working correctly with vista drivers yet??? (or even have you managed to find any vista drivers!!!).
Video and sound running in slow-mo... do i need to install monitor drivers ??? (if so where are they??)
Please., please., please., someone help...
Leighster

Well... finally had some joy worth writing about. The 1st version of Vista i installed was an 'Upgrade' from my MCE 2005... the results were that the video and audio played slow (among other problems)... anyway, after much frustration i decided to try a clean install of vista instead of the upgrade. ... ... ... ... ... ... WOW... it worked...video drivers installed, everything works fine (except the Qosmio buttons above the keyboard. NO SLOW_MO AUDIO OR VIDEO :)
Hope this is of some use for others...
(now to find the Vista compatible Qosmio player drivers!!!)
Leighster

Qosmio G20 - How to find a update for the video card?

hi i cant find the update for video card and when i run games he side to me your video card drivers are too old.update them.
my laptop:(toshiba Qosmio G20)
my vidoe card:(NVIDIA GeForce Go 6600)
Operating System:(Microsoft Windows XP Professional)

same problem when i go to nvidia i see new update but when i want to download it i cant there is problem and that apicture:
<a href="http://img162.imageshack.us/i/18718370.jpg/" target="_blank"><img src="http://img162.imageshack.us/img162/9370/18718370.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a><br /><br /><a href="http://img604.imageshack.us/content.php?page=blogpost&files=img162/9370/18718370.jpg" title="QuickPost"><img src="http://imageshack.us/img/butansn.png" alt="QuickPost" border="0"></a> Quickpost this image to Myspace, Digg, Facebook, and others!

How to connect Qosmio G20 to HD Plasma TV

Similar Messages

Maybe you are looking for