How to connect Satellite P100-429 to a LG LCD TV using a VGA?

Having problems connecting my laptop to a LG LCD TV using a VGA cable, the TV keeps coming up NO INPUT

In my opinion you use wrong port. I am not 100% sure but I believe you have S-Video port on notebook and use this port to connect your notebook to the TV.
You need just the right cable. When connected enable S-Video port on TV.
Generally speaking the same is with VGA port.
Has your TV VGA port or you use some adapters?

Similar Messages

  • Need WXP drivers for Satellite P100 -429

    Hi,
    I had to reinstall windows XP on my gf Satellite P100-429, but she lost the origina disk, so when i installed the new XP there are the following devices missing drivers (they have yellow question mark beside them) and I cant connect the laptop to the internet.
    1. Audio Device On High Definition Audio Bus
    2. Ethernet Controller
    3. Mass Storage controller
    4. Netwrok controller
    5. SM Bus Controller
    6 Video Controller (VGA Compatible)
    Can anyone tell me where I can find these drivers, i have been looking all day for them.
    I imagine if I can find them its just a case of putting them on a disk or usb key and installing them ?
    Thanks a million.

    You must see this problem from other side. Fact is that all drivers, tools and utilities must be installed in right installation order. How to do this is listed in Installation Instruction document and this can be downloaded on this download page for your notebook model.
    Obviously you didnt follow this order and some drivers are missing now.
    1. Audio Device On High Definition Audio Bus try with sound driver and install also modem driver
    2. Ethernet Controller install LAN driver
    3. Mass Storage controller is chipset utility installed?
    4. Netwrok controller is WLAN driver installed?
    5. SM Bus Controller try with flash media driver
    6 Video Controller (VGA Compatible) display driver
    Install this and post result but, as I wrote before best way to install all stuff properly is to follow install instructions document.

  • BIOS update fails on Satellite P100-429

    Ive had a bad flash on my Satellite P100-429.
    The utility crashed which left me with a bookend. Not happy
    Ive created a floppy crisis recovery disk & bought a USB floppy drive after much hunting the internet for info.
    Problem is I need verification on the exact key combination for my laptop to envoke crisis recovery mode.
    On power up I have usual symptoms, flash of LEDs, power to CD-rom, power click of floppy drive etc...
    I just need to verify correct sequence for key combinations.
    Can anyone help?
    Win-f, win-b, fn-f, fn-b, win-esc, fn-escape doesnt seem to work for me
    How long to wait for floppy to start after combination etc?
    Help!

    Hi
    I dont have experience with these BIOS recovery tools because in my opinion its a little bit too risky. This is no official way to recover a BIOS and I dont want to destroy the whole ROM module.
    In my opinion if a BIOS update wasnt successful, you should go to an authorized service provider. Contact a notebook technician and explain your situation. The technician can try to reflash it and they have more experience. I think this shouldnt be a problem to contact one. ;)
    Good luck!

  • Satellite P100-429 - No sound after Windows 7 installation

    I have a Satellite P100-429 Purchased Nov 2006.
    I have just upgraded from XP to Windows 7 and Office Pro Plus. All works well but there is no sound if I try to play a CD. I have done usual checks for Mute etc. but no Joy. In device manager a yellow triangle with exclamation mark within is against my sound device. C
    an I download a new driver to solve problem or is it more complicated than that? Than you

    Hello
    For me it sounds like that you didnt install the sound driver for sound card
    According the Toshiba website there is no 64bit sound driver available for Satellite P100 but I noticed that Satellite P300 supports Windows 7 64bit and has Conexant sound card too. Maybe this driver is working for you too.
    Just search for Satellite P300 drivers and test the sound driver It should work! :)

  • How to connect my guitar into my new 13'' macbook pro using headphone's port?

    how to connect my guitar into my new 13'' macbook pro using headphone's port?

    you need a standard guitar cable and a 1/4 inch to 1/8 inch adapter such as this http://www.amazon.com/Recoton-CW1521-4-Inch-8-Inch-Adapter/dp/B00006HOIW

  • How to connect to website through computer if i do not use internet through phon's sim

    how to connect to website through computer if i do not use internet through phon's sim

    Connect through wifi.
    Turn off Cellular data through settings __ General __ Network __ Cellular Data on/off

  • DVI Connection XBOX360 to Satellite P100-429

    Hello,
    Can I connect my XBOX360 to my laptop using the DVI connection?
    Thanks,
    Stephen

    Hello Stephen
    As far as I know DVI port on Satellite P100 is Video OUT port and you can not sent video signal from external device into notebook.

  • Satellite P100-429 - New WLAN card doesn't work

    Hi,
    I've just upgraded my home network to draft 'N' standard and thought I'd upgrade my WiFi card on my P100-429 Laptop;
    Laptop is running Vista Home Premium, and has the latest BIOS and Drivers installed.
    Laptop currently has an Intel 3945ABG card fitted, which works fine. I purchased an Intel 4965AGN Card but when I fit it, the computer powers up, but wont load (lights on, fan on - nothing else)
    O.K. - So I read up on a few forums, could be a bad card, so I bought a Toshiba branded 4965AGN card - P/N G86C0002P710
    Still have the same problem - the computer refuses to start up. Intel tech support say the card should work?
    Obviously a compatability issue - is there anything I can do about it?
    Or does anybody know what type of card I should use?
    Thanks for your help!

    Im not a Satellite P100 owner but is your notebook equipped with 3 or only 2 antennas?
    If your notebook does only have 2 antennas you cant upgrade it to draft N because this WiFi standard needs 3 antennas.
    I think your notebook does only have 2 antennas so this would be the reason why both cards are not compatible to your notebook.
    Greets

  • How to connect Satellite Pro L40-15A to my TV?

    Hi
    I would like to use the laptop connected to my TV to watch movies. Can it be connected using the TV as a monitor and what type of cable would you use?
    Thanks
    Malc

    To connect laptop to TV is very easy. If you check Users manuals document you will find exact explanation how to do this.
    If I am remembering well your notebook should have S-Video out port and for video signal transfer you must use S-Video cable. Hopefully your TV has S-Video IN port. If not you can use different adapters.
    Please check this thread and read carefully posting written by Miro. He has explained very detailed how to connect laptop to the TV.
    If you have more questions please post again.

  • Satellite P100-429 - cannot install display drivers for Win XP SP3

    Hi,
    i have Toshiba p100 429 laptop, installed with win xp professional sp3. I'am unable to change screen resolution from 640 by 480.
    Actually i tried to download display driver from toshiba site but after installing driver it give blue screen with error message NV4_mini.sys error.
    After this i can not even start my laptop.
    I am presently using external monitor ( sync master B2230). I have also tried to download drivers from Nvidia website but that does not work either.
    Resolution on my screen is still low. thanks for your help

    Have you tried to install THIS driver?

  • Satellite P100 - 429 A3 Turning off when windows loads

    Heya. This is a serious problem that has rendered my Notebook unusable. I was just wondering if anyone knows what it is.
    I was in a source game when it happened for the first time, I jumped in the game and the laptop just cut out. No shutting down, it just turned straight off as if someone had held the power button. I stared at it for a minute then powered it back on. It seemed to go fine, I thought it was just an odd hiccup, but then after it had finished the windows loading screen, it did exactly the same thing. Now every time I start up, it get's past the loading screen and sometimes it get's to the Welcome message, soemtimes before the cursor is even loaded it will turn off in the same mannor.
    The only things I have recently changed is the BIOS (which is my obvious suspicion.) I was just browsing the Toshiba website drivers page and I found a BIOS update for my Notbook cliaming that it had been improved. So I downloaded and installed it, once the installation had done it's job the Notebook restarted, but on first run Windows bluescreened before it had even loaded. Then after that it was working fine until now.
    I also tried to use a Windows disk to do a recovery of windows. However, the recovery console caused the same thing. Within a few seconds of initializing, the computer just cut out.
    If anyone has a clue what's goind on, please let me know.
    Sorry for any typos, I'm not on a familiar keyboard.
    Thanks again.
    Wolfy

    > I jumped in the game and the laptop just cut out. No shutting down, it just turned straight off as if someone had held the power button.
    Well, this sounds like an overheating issue. Fact is that all internal devices run with a full performance during the game playing. This leads to a high temperature inside the notebook. If your ventilators are not free due to the dust and debris then the notebook will shouts down to prevent the hardware from damage.
    In such cases the fan cleaning is necessary and advisable.
    I have had a similar issue on my notebook and solved it using an compressed air spray!
    In my knowledge the Sat P100-429 belongs to the PSPA3 series.
    You should really be 100% sure that you use the right BIOS.
    However, its also possible that the notebooks hardware malfunctions.
    In such case the hardware check is needed. Such test can be done by an authorized service provider in your country.
    Good luck

  • How to connect Satellite C670D-11K to my LCD TV?

    Afternoon,
    Slowing losing whats left of my hair trying to get my laptop hooked up to my LCD TV. :(
    I've purchased a VGA to HDMI lead plugged it into my tv and my lappy and nothing, my brother on the other hand plugs his laptop in via he built in hdmi port he has and the picture appears straight away.
    Any ideas/solutions would be much appreciated...

    VGA to HDMI adapter would not work because you cannot send a video signal from the analogue port to a digital port (but from digital to analogue).
    For such purpose you will need an expensive and special converter.
    Therefore I would recommend using another solution. For example connection the notebook to TV using an VGA to s-video cable or VGA to scart

  • When i connect my mac book pro to an external display using a VGA cable and adaptor, the external display splits into several different columns of the same screen overlapping one another. Does anybody have any ideas as to why this happens?

    I have used different VGA to mini port adaptors, different VGA cables and connected them to different external monitors and prjectors but the same thing happens. I am starting to think there may be a problem with the macbook itself however, when i have used a HDMI lead and adaptor to external monitors the external display is fine.

    Hi there LDIMERY,
    You may find the troubleshooting steps in the article below helpful.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    -Griff W. 

  • How to connect Satellite M115 to the TV?

    Hi
    I have a Toshiba Satellite M115 s3094 and Im trying to connect it to my TV. The TV I have has only composite and SCART ports (its an old TV). I managed to connect it through s-video connector but I have no sound on the TV and its also in black and white.
    How do I get color and sound? Any help would be very much appreciated.
    Thank you.

    Hello
    To be clear: With S-Video cable you can transfer to the TV video signal only. For sound you need other cable. When you use S-Video cable you must enable S-Video port on the TV. When you do this the problem with color will be solved.
    For audio you need audio adapter and audio cable. Both you can connect to the TV directly (if the ports are available red and white). If not you can connect it to SCART adaptor together with S-Video cable.
    Check please this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=69026&#69026 . There you can find links and see how all this stuff looks like.
    If you have more questions please post again.
    Bye

  • How to connect Satellite 1800-400 on TV?

    Hi
    I want to connect my Toshiba Satellite 1800/400 to my TV, but i dont know how to install a secondary video adapter. My graficscard is a Trident Video Accelerator Cyberblade Ai1.
    PLEASE help because i am getting hopeless and frustrated because i need it for school

    Hello Kevin
    As far as I know you dont need to install a secondary video adapter. The notebook has got Video-out jack output to transfer the NTSC or PAL data to external devices (TV).
    If you want to activate the TV output function, please go to Display Properties then click on Advanced. Please click now on Display Device tab.
    There you can set the settings to TV and in the Multi-Monitor Devices section to LCD/TV. Dont forget the TV-Standard (PAL or NTSC).
    Nevertheless with the key combination FN+F5 you can choose between the LCD and TV.
    Bye

Maybe you are looking for

  • ITunes will not recognize my device (iPhone or iPad)

    When conecting my iPhone or iPod, iTunes shows no device connected.  I've tried following all the help in iTunes Help and nothing has worked.  It was working fine one day and the next............. nothing.  I down loaded two new Apps into iTunes the

  • BUG: Unable to increase stack size in OJVM

    Hi, I have a complex ADF Faces page (jspx) that has reached the level of complexity that I can reliably cause the JVM to die when running the page with: Fatal error: Cannot find class java/lang/StackOverflowError Process exited with exit code -1.when

  • Questions on /etc/default/grub

    i'm currently switching from syslinux to grub2 due to lack of support with xen and lvm/luks and just general information that i have a massive headache from googling for hours about. anyways, i'm configuring grub very cautiously because i would prefe

  • Provide password me adobe reader

    provide password me adobe reader mob 9977145905

  • MIRO output determination

    Hi, I am trying to develop a new requirement in VOFM for outputcontrol to pick up credit memos in the transaction MIRO. In this routine i need to fetch the corresponding PO number of the Credit memo. None of the communication structures (KOMKBMR, KOM