How to connect Satellite Pro L40-15A to my TV?

Hi
I would like to use the laptop connected to my TV to watch movies. Can it be connected using the TV as a monitor and what type of cable would you use?
Thanks
Malc

To connect laptop to TV is very easy. If you check Users manuals document you will find exact explanation how to do this.
If I am remembering well your notebook should have S-Video out port and for video signal transfer you must use S-Video cable. Hopefully your TV has S-Video IN port. If not you can use different adapters.
Please check this thread and read carefully posting written by Miro. He has explained very detailed how to connect laptop to the TV.
If you have more questions please post again.

Similar Messages

  • BIOS update issue on Satellite Pro L40-15A - Old BIOS can't recognise EEPROM

    Hi
    I'm having trouble flashing my bios.
    I have a Satellite Pro L40-15A.
    The Toshiba winflash tool that comes with the bios file tells me that the 'Old BIOS can't recognise EEPROM'
    I was recommended to use AFUDOS on another forum but that tells me the bios has an invalid boot block.
    AMI flas for dos tells me the flash rom is write-protected??? There is no option in bios to disable it and I don't think anyone would be dumb enough to put a hardware Bios protect jumper on a laptop.
    Please help
    Thx

    Hi and thanks for reply
    The 5.10 bios update is only for XP laptops, my one came with windows vista installed so I need v2.20
    "old BIOS cannot recognise EEPROM" is the error message i get when i try to flash the bios with the supplied software from Toshiba
    _+UPDATE:+_
    New verion of BIOS update has worked!!
    Case could be closed

  • How to connect Satellite Pro L10 to TV?

    Hi,
    I have a Satellite Pro L10 which has a VGA out put but no s-video out put and I would like to stream on to my TV! Does anyone know what I need to get or have to do to enable me to do this? I have a VGA to SCART led but this dose not seems to work!
    Cheers
    Ray.

    Hi buddy,
    there are such special "VGA-to-TV" Converter like this one http://www.smarthome.com/7743.html . The benefit of this box is, that you can make some accurate settings for your picture.
    Otherwise you can try that thing which pedro suggested.
    Should work well. ;)
    Greets

  • How to connect Satellite Pro C to TV?

    Hi Everyone,
    Thanks.
    I would like to connect my C series up to my TV.
    The C series only has an External Video Port.
    My TV has RCA inputs and an SVHS input or S_Video imput.
    Can anyone help?
    John

    Hi
    If your notebook supports only a monitor out port (RGB) then you will need an adapter.
    For example RGB to s-video
    <img src='http://img85.imageshack.us/img85/8548/capturetlz.png' border='0'/>

  • Satellite Pro L40 wont boot after changing BIOS settings

    Alright changed a few settings in the bios last night and now when I boot I get a black screen lights flash and that hard drive light comes on but nothing on screen.
    There was no password on bios,... how would I reset BIOS to normal?
    I put a windows disk on I can hear the disk spinning but nothing on the screen
    (I think I have come to the right place on the forum)
    Its a Toshiba Satellite Pro L40 model psl4be.
    Thanks

    >There was no password on bios,... how would I reset BIOS to normal?
    You can set the BIOS to default ONLY inside the BIOS so you have to access the BIOS pressing F2 or at the beginning of the booting order
    But I doubt that this problem is related to the BIOS.
    Maybe its just a simple bad luck that this issue happened just exactly after changing something in BIOS.
    Try to connect an external monitor and check if you can see something on 2nd display.

  • Memory upgrade on Satellite Pro L40-15d

    Hi
    I have Satellite Pro L40-15d with 512 memory (Samsung) but I wont upgrade to 1GB. I have Kingston ktt667d2/1g I have tray to put in to both slots but nothing work I cant switch on computer.
    But when I change for old one laptop is ok. What can I do? Install special program or update BIOS or maybe the memory stick is broken.
    Regards

    Hi
    The notebook doesnt boot after the memory upgrade due to these different issues;
    - memory modules are not compatible together
    - memory modules are not compatible with the notebook
    - memory modules are faulty
    - one of memory slots is faulty
    In most case the memory module replacement helps.
    One hint; did you try to switch the memory modules in the slots? Sometimes this helps.
    Several weeks ago I have updated my memory and the notebook didnt boot.
    I thought its a memory malfunction but after module switching the notebook booted correctly.
    Good luck

  • How to connect macbook pro to panasonic tv with hdmi cable

    How to connect macbook pro to panasonic hd tv with hdmi cable

    Hi m,
    It depends which MPB you have and the inputs on the TV. The following assumes your TV has an HDMI input which will work with a computer.
    This is if your MBP is from April 2010 or newer:
    http://support.apple.com/kb/HT4241
    First connect the adapter to the MBP and the HDMI cable from the adapter to the TV, then go to System Preferences > Sound > Output > select HDMI.
    Or if your MBP is older than that and you have a Mini DisplayPort, you can use something like this: http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/
    If it's older than that, for video you need a DVI or mini DVI to HDMI or whatever input your TV has. For audio, you need a 3.5mm stereo mini plug to RCA or optical (Toslink), depending on what audio input your TV has.

  • How to connect macbook pro to tv

    How do I connect my macbook pro (2 -3 years old) to a tv?  Bought an apple HDMI connecter, bought cable to connect to it and to tv, connected them but nothing happens.

    how to connect macbook pro to tv

  • Satellite Pro L40 - What is a average battery runtime?

    Hi there,
    I just recently received my Satellite Pro L40 and am just wondering what the average battery runtime is? Once fully charged it only seems to be able to handle 1hour max. Is this normal?
    The laptop I had before was the same, but my friends laptop, which is more than a year older than mine, runs for more than 3 hours on a fully charged battery.
    Is there a fault??
    Thanks

    Hi
    It is not easy to answer this question because the battery working time depends from the notebook usage. You should know that you will be able to run the notebook much longer on battery power using only some common applications like Word or Internet Explorer.
    Playing games, watching DVDs or burning the CD/DVD waste more battery power because the performance of the single devices is much higher!!!!
    Fact is that the Pro L40 notebook was equipped with high-tech parts and devices. The notebook supports a strong Intel Pentium Dual-Core CPU, huge HDD, nice GPU and and and
    Furthermore you should know that the preinstalled Vista OS eats many resources and waste more battery power as the Win XP!!!
    All this factors has a influence on the battery working time.
    Last but not least you should know that there are different batteries on the market.
    If you want to increase the battery performance buy a stronger battery!!!
    regads

  • Satellite Pro L40 - Sound Driver after Windows XP SP3 Install

    Hi,
    I had bought the Satellite Pro L40 about 6 months ago and the speed of the laptop was too slow with windows Vista. So I decided to install an old copy of windows XP that I had bought earlier. I upgraded the windows installation to SP3 before installing all the drivers.
    Now all the drivers have been installed properly except the sound driver. I downloaded the XP version of the driver from the toshiba website but it did not work. So I though maybe the vista version would work, so I downloaded that. But that didn't work either.
    Can anyone suggest a solution where I can get the sound driver to work? Preferably without having to get the windows reinstalled again.
    Please help me out...!
    Thanks

    hi there,
    Try reinstalling the soundcard driver for XP; Just go here -- > [Realtek Soundcard Driver fo XP|http://support1.toshiba-tro.de/tedd-files2/0/sound-20071120150900.zip]
    Hope this helps :)
    Message was edited by: iSkO

  • Satellite Pro L40: black screen but faint image in the background

    Satellite Pro L40-17H (PSL4BE-00T005EN)
    Hello,
    I would appreciate some help with the following problem:
    SYMPTOMS: Screen is black, but I can see that there is a faint image in the background.
    I get a good image in external monitor.
    I suspect, _among others_, that there may be a faulty *lid sensor/switch*, but I have been unable to locate it, although I have disassembled the unit.
    If somebody knows, please let me have the exact *location* where I should look for the switch.
    Thank you

    Thank you RandyRoberts
    You are probably right, it is likely that the inverter is faulty, or it might be a bad lamp.
    Nevertheless, I cannot exclude the possibility that there is a bad or stuck lid switch. That is why I insist to check that one out as well.
    I would still like to know where the lid switch is located on the L40.
    Thanks and regards.

  • Can I upgrade the T2310 CPU in Satellite Pro L40-15D series laptop?

    Hi, ( I apologise if this has been asked before but when I search ' Satellite pro l40 series' I found no relevant answers )
    I've been searching around the net & so far found some conflicting answers to this question so hopefully this forum may be able to help.
    I have a Satellite pro L40 15D laptop and I wish to upgrade the Intel Pentium Dual-Core 1.46 Ghz T2310 CPU to a Intel Pentium Dual-Core T4300 2.1GHz 1MB 800 CPU or something similar.
    I have found the following information from http://www.notebookcheck.net/Review-Toshiba-Satellite-L40-14N-Notebook.7294.0.html
    " f you consider a CPU upgrade, there are not many options available. The Intel GL960 express notebook chip set supports only up to 533 Mhz FSB processors. So, most of the up-to-date Core 2 Duo CPUs (with 667MHz) cannot be used. "
    But then I have also read that the GL960 can run processors of 800Mhz?.
    I also asked the question on ebay from the seller of the T2310 CPU & received this answer
    "SHOULD be okay, but your T2310 has 533Mhz FSB and the T4300 has 800Mhz.
    Most modern intel motherboards should easily accept an 800mhz cpu, but I cannot guarantee. Might be an idea to see if you can find out if there are other models of Toshiba L40 that also have 800mhz chips, as that would be a good indicator.
    And if I can not upgrade too a T2310 because of the 800mhz is their a 533mhz cpu that will be compatible & more powerful for audio production than my current 1.46 Ghz T2310 CPU.
    I have only had this PC 4 years from new,it would seem to me to be not very resource friendly if this laptop has not be designed to handle upgrades.
    Thanks for any guidance.
    Message was edited by: ib1

    To quote
    'Problem is that CPU upgrade is not supported and all you do is on your own risk.
    Check also http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm"
    Helpful link thanks :-)
    Of course any upgrade I did personally would be entirely at my own risk .
    So it's not a good idea as mentioned .
    I would still like to know if technically it is possible and if so it's most probably been done & maybe works fine, rather then half answers .
    Message was edited by: ib1
    Alternatively do you guys have any suggestions, other than buying a new laptop, of ways to increase the performance for music production.
    I already have 1.99 GB of ram installed .
    Would using a external USB sound card and bypassing the internal sound card give me a little more processing power . I believe it's the real time processing of audio effects etc that make audio production demanding on a cpu.Could that processing somehow be shared with a pro audio card? .
    Either way thanks for the help guys :-)
    Message was edited by: ib1

  • Satellite Pro L40 wont start

    When i turn on my Satellite Pro L40 it shows me a screen asking me to start windows repair or start windows normally.
    When choosing either option it leads me back to the same screen.
    Does anybody have any ideas?
    Many thanks

    Hi Will
    For me it looks like the installed OS was muddled up for non apparent reason
    If you are not able to boot in the Windows XP OS and if the repair option doesnt help to boot in the safe mode I dont see any other possibility as to boot from the Toshiba recovery CD and to reinstall the operating system again!
    But note; the booting from the recovery CD will format the whole HDD and you will lose all files stored on the HDD. ?
    This is a drastic procedure but in my eyes its the only one which could helps to solve this issue.
    Greets

  • How to connect macbook pro with hdmi? any ideas?

    hi,
    as the new macbook, doesn't have a dvi port but a faste thunderbols my good old dvi2hdmi cable is useless.
    any ideas, how to connect the new macbook to my hdmi tv?
    thx for help!

    Retina has a HDMI port.
    Others have a ThunderBolt, which is backward-compatible with Mini DisplayPort. Get a Mini DisplayPort to HDMI adapter, and make sure you insert it until essentially ALL of the metal end is inside the jack, and you will be in business.

  • How to connect MacBook Pro 17" Mountain Lion with HDMI port on TV, Panasonic TC-P55ST50

    Any experience with cables for connecting MacBook Pro 17" Mountain Lion with HDMI port on TV, Panasonic TC-P55ST50 (or similar)?

    It depend upon the model (age) of you MBP.  If you have a Thunderbolt or minidisplay port, then you will need a minidisplay/HDMI adapter.
    eshop.macsales.com/item/NewerTech/CBLMDPHDMI/
    Or you can get an all in one:
    http://www.amazon.com/Cable-Matters-Premium-DisplayPort-Thunderbolt/dp/B004CADYD O/ref=sr_1_3?s=electronics&ie=UTF8&qid=1361985588&sr=1-3&keywords=minidisplay+hd mi
    If you have an older mac with a DVI port, you will need something like this:
    http://www.amazon.com/DVI-HDMI-Cable-6ft-Male-Male/dp/B0002CZHN6
    Note that audio is supported via HDMI for MBPs 2010 and later.  Earlier ones require tapping the audio output port.
    Ciao.

Maybe you are looking for

  • Development with the SDK

    Hello, I am new to SBO SDK development. So I have ran through the tutorial and the samples. I used the profession installer to install some of the samples. After troubleshooting a wizard problem (missing "...setup.msi"), I can successfully create ins

  • Bt wifi login credentials

    Hello, I've been puzzling over this problem for two days now and I hope someone ca help me please. I have bt unlimited broadband with inclusive bt wifi. I'm opted in to bt wifi and I've used the status checker (bt.com/wifi/secure/statuscheck.do) whic

  • Windows 2008 windows service cannot launch Adobe Reader

    I created a windows service that receives pdf files in one folder and should print them opening adobe reader. In my PC with Windows 7 it works just fine but when the application is deployed in Windows 2008 R2 server then the windows service is not ab

  • Trying to find a class(es) that...

    Converts various measurements such as: Linear conversions (as feet to inches) Volume conversions (as gallons to liters, gallons to cubic inches) And Does anyone know if a class exists that calculates the volume of various shaped objects?

  • How to close an Investment Project without Capitalizing

    Hi All, Requirement is how to close an Investment Project midway, when cost have been settled to AuC over several periods. In present system they transfer the cost from their Work In progres account to a Cost center. Thanks and regards Maneesh