How to connect search help to pa0001

hi
i have creared a new field in infotype called "SECTOER" - i want to connect a search help that i created to this field.
The search help is bassed on table hrp1000 and SECTORE is field objid in the tale.
is there a way to conect the SEARCH HELP to new field despite the facr that they have different names ?
thanks Elad

Sure you can use that search help. It doesn't matter if the names are different as long as the domain is the same.
In case it is an SE11 search help you can attach it directly in the structure PSXXX or HRIXXX in case you are creating a new infotype or in CI_PXXX in case you are enhancing a standard one.
Edited by: Jose Maria Otero on Nov 6, 2011 1:21 PM

Similar Messages

Connect search help to standard table

hi!
i want to connect search help to structure P0001-MSTBR, without a repair.
is it possible? and if so how?
regards
yifat

Hi,
If you want to add a search help to a structure or a table, it would eb a modification. No other way.
However, you could decide to program the F4 in your transaction. You could then make use of the FM F4IF_INT_TABLE_VALUE_REQUEST. Just pass to this FM, an internal table of values. Ofcourse you would have to populate some other fields like field name, etc.
Remember to reward points.
Rgds,
Prashanth.
SAP.

How to create Search Help for a field in Table control !!

Hello Friends,
 I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
Thanks,
Senthil

Check the sample code:
*& Include ZSRO_MPRN_SEARCH *
MODULE PSTLZ_F4 INPUT
MODULE pstlz_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
 stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = c_x
 determine_loop_index = c_x
 TABLES
 dynpfields = lt_dynpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 MOVE lt_dynpfields-fieldvalue TO ws_outcode.
 ws_len = STRLEN( lt_dynpfields-fieldvalue ).
 IF ws_len GE 7.
 ws_len = ws_len - 3.
 ws_icode = ws_code+ws_len(3).
 lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
 CONCATENATE lt_dynpfields-fieldvalue '%'
 INTO ws_outcode.
 CONDENSE lt_dynpfields-fieldvalue.
 REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
 ELSE.
 CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
 INTO ws_outcode.
 ENDIF.
 ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 TABLES
 dynpfields = lt_dnpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode.
 ELSE.
MPRN blank and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1.
 ENDIF.
ELSE.
MPRN exist and Post code exist
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode AND
 mprn EQ lt_dnpfields-fieldvalue.
 ELSE.
MPRN exist and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE mprn EQ lt_dnpfields-fieldvalue.
 ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'MPRN'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 window_title = 'Select MPRN'
 value_org = 'S'
 TABLES
 value_tab = i_mprn1 "lt_mprn
 return_tab = lt_returntab
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc EQ 0.
 READ TABLE lt_returntab INDEX 1.
 READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
 IF sy-subrc EQ 0.
Updating post code
 CONCATENATE i_mprn1-outcode i_mprn1-incode
 INTO ws_postcode
 SEPARATED BY space.
 MOVE ws_postcode TO i_mprn-post_code.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld-fieldvalue = ws_postcode .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
Updating MPRN
 MOVE i_mprn1-mprn TO i_mprn-mprn.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld-fieldvalue = i_mprn1-mprn .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
 ENDIF.
ELSEIF sy-subrc EQ 2.
 MESSAGE s005(zspa) WITH ws_postcode .
ENDIF.
ENDMODULE. "PSTLZ_F4 INPUT
MODULE MPRN_F4 INPUT
MODULE mprn_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
 stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = c_x
 determine_loop_index = c_x
 TABLES
 dynpfields = lt_dynpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 MOVE lt_dynpfields-fieldvalue TO ws_outcode.
 ws_len = STRLEN( lt_dynpfields-fieldvalue ).
 IF ws_len GE 7.
 ws_len = ws_len - 3.
 ws_icode = ws_code+ws_len(3).
 lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
 CONCATENATE lt_dynpfields-fieldvalue '%'
 INTO ws_outcode.
 CONDENSE lt_dynpfields-fieldvalue.
 REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
 ELSE.
 CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
 INTO ws_outcode.
 ENDIF.
 ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 TABLES
 dynpfields = lt_dnpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode.
 ELSE.
MPRN blank and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1.
 ENDIF.
ELSE.
MPRN exist and Post code exist
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode AND
 mprn EQ lt_dnpfields-fieldvalue.
 ELSE.
MPRN exist and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE mprn EQ lt_dnpfields-fieldvalue.
 ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'MPRN'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 window_title = 'Select MPRN'
 value_org = 'S'
 TABLES
 value_tab = i_mprn1 "lt_mprn
 return_tab = lt_returntab
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc EQ 0.
 READ TABLE lt_returntab INDEX 1.
 READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
 IF sy-subrc EQ 0.
Updating MPRN
 MOVE i_mprn1-mprn TO i_mprn-mprn.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld-fieldvalue = i_mprn1-mprn .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
 ws_dynpfld-stepl = mprn-current_line.
**code changed by laxman 10.08.2005
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
Updating post code
 CONCATENATE i_mprn1-outcode i_mprn1-incode
 INTO ws_postcode
 SEPARATED BY space.
 MOVE ws_postcode TO i_mprn-post_code.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld-fieldvalue = ws_postcode .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
 break gblap0.
 ws_dynpfld-stepl = mprn-current_line.
 LOOP AT i_mprn.
 MOVE i_mprn1-mprn TO i_mprn-mprn.
 MOVE ws_postcode TO i_mprn-post_code.
 MODIFY i_mprn INDEX
 mprn-current_line." transporting MPRN POST_CODE.
 ENDLOOP.
**code changed by laxman 10.08.2005
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
 ENDIF.
ELSEIF sy-subrc EQ 2.
 MESSAGE s006(zspa) WITH i_mprn1-mprn .
ENDIF.
ENDMODULE. "MPRN_F4 INPUT
MODULE GNTC_F4 INPUT
MODULE gntc_f4 INPUT.
DATA: BEGIN OF lt_gntc OCCURS 0,
 gntc LIKE iflot-zzgntc,
 END OF lt_gntc.
CLEAR: lt_returntab, lt_gntc.
REFRESH: lt_returntab, lt_gntc.
lt_gntc-gntc = 'DM'.
APPEND lt_gntc. CLEAR lt_gntc.
lt_gntc-gntc = 'NDM'.
APPEND lt_gntc. CLEAR lt_gntc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'ZZGNTC'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 window_title = 'Select Gas Nomination Type Code'
 value_org = 'S'
 TABLES
 value_tab = lt_gntc
 return_tab = lt_returntab
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc EQ 0.
 READ TABLE lt_returntab INDEX 1.
 i_mprn-dm_ndm = lt_returntab-fieldval.
ENDIF.
ENDMODULE. "GNTC_F4 INPUT
*& Module mprn1_f4 INPUT
 text
MODULE mprn1_f4 INPUT.
DATA: lt_f4 TYPE ddshretval OCCURS 0 WITH HEADER LINE,
 lt_returntab1 LIKE ddshretval OCCURS 0 WITH HEADER LINE,
 lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
 lt_dnpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: stepl1 TYPE systepl,
 stepl_index1 TYPE systepl.
DATA : i_dnpfld1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
 ws_dyname1 LIKE d020s-prog,
 ws_dynumb1 LIKE d020s-dnum,
 ws_dynpfld1 LIKE dynpread.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
 lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
 stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 determine_loop_index = 'X'
 TABLES
 dynpfields = lt_dynpfields1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
 EXPORTING
 tabname = 'IFLOT'
 fieldname = 'I_MPRN-MPRN'
 searchhelp = 'ZS_MPRN_PC'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 TABLES
 return_tab = lt_f4
 EXCEPTIONS
 field_not_found = 1
 no_help_for_field = 2
 inconsistent_help = 3
 no_values_found = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-mprn.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld1-fieldvalue = i_mprn-mprn.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-post_code.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld1-fieldvalue = i_mprn-post_code.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
ENDMODULE. " mprn1_f4 INPUT
*& Module pstlz1_f4 INPUT
 text
MODULE pstlz1_f4 INPUT.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
 lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
 stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 determine_loop_index = 'X'
 TABLES
 dynpfields = lt_dynpfields1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
 EXPORTING
 tabname = 'IFLOT'
 fieldname = 'I_MPRN-POST_CODE'
 searchhelp = 'ZS_MPRN_PC'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 TABLES
 return_tab = lt_f4
 EXCEPTIONS
 field_not_found = 1
 no_help_for_field = 2
 inconsistent_help = 3
 no_values_found = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-post_code.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld1-fieldvalue = i_mprn-post_code.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-mprn.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld1-fieldvalue = i_mprn-mprn.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
ENDMODULE. " pstlz1_f4 INPUT
Regards,
Prakash.

How to use search help in ECC6.0 reports without matchcode.

How to use search help in ECC6.0 reports without matchcode.
Select-options: O_SHIP FOR KUNWE MATCHCODE OBJECT DEBI is in 4.6c.

we can use on value request for that.
report zrich_0001 .
tables: t001.
data: begin of it001 occurs 0,
bukrs type t001-bukrs,
butxt type t001-butxt,
ort01 type t001-ort01,
land1 type t001-land1,
end of it001.
select-options s_bukrs for t001-bukrs.
initialization.
select bukrs butxt ort01 land1 into table it001 from t001.
at selection-screen on value-request for s_bukrs-low.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'BUKRS'
dynprofield = 'S_BUKRS'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = it001.
start-of-selection.
refer to this thread:
On value request?

How to use search help in layout of se51

how to use search help in layout of se51.

Hi,
One of the important features of screens is that they can provide users with lists of possible entries for a field. There are three techniques that you can use to create and display input help:
Definition in the ABAP Dictionary
In the ABAP Dictionary, you can link search helps to fields. When you create screen fields with reference to ABAP Dictionary fields, the corresponding search helps are then automatically available. If a field has no search help, the ABAP Dictionary still offers the contents of a check table, the fixed values of the underlying domain, or static calendar or clock help.
Definition on a screen
You can use the input checks of the screen flow logic, or link search helps from the ABAP Dictionary to individual screen fields.
Definition in dialog modules
You can call ABAP dialog modules in the POV event of the screen flow logic and program your own input help.
These three techniques are listed in order of ascending priority. If you use more than one technique at the same time, the POV module calls override any definition on the screen, which, in turn, overrides the link from the ABAP Dictionary.
However, the order of preference for these techniques should be the order listed above. You should, wherever possible, use a search help from the ABAP Dictionary, and only use dialog modules when there is really no alternative. In particular, you should consider using a search help exit to enhance a search help before writing your own dialog modules.
Input help from ABAP dictoinary
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm
Field Help on the Screen
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbaa6135c111d1829f0000e829fbfe/content.htm
Field Help in Dialog Modules.
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbaac935c111d1829f0000e829fbfe/content.htm
Regards,
Vara

How to implement Search Help in Interacive Form based on WebDynpro Java?

Hi Experts,
How to implement Search Help in Interacive Form based on WebDynpro Java?
Could someone please provide the prerequisites and the code for the same.
Regards,
Shobhit

Extend the controller and get the handle of the current row of the VO. Set set the attribute context filed accordingly. Also get the handle fo the flexbean and set the context. According rendering would change.
Regards
Sumit

How to assign search help using ovs for select options for ALV in web dynpr

how to assign search help using ovs for select options for ALV in web dynpro

Hi,
refer http://wiki.sdn.sap.com/wiki/display/WDABAP/InputhelpofObjectValueSelectioninWDABAP
http://www.****************/Tutorials/WebDynproABAP/OVS/page1.htm
and http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproAbap-OVSsearch+help
Thanks,
Chandra

How to map search help dinamically to a context attribute

Hi,
I need to map search help dynamically based on selection screen radio button, Please let me know how to map search help dinamically to a context attribute
Best regards,
Alleiah

Here is the sample code,
data lo_nd_info type if_wd_context_node_info.
lo_nd_info = lo_nd->get_node_info( ).
CALL METHOD lo_nd_info->set_attribute_value_help
        EXPORTING
          name            = 'KTONR' (attribute Name)
          value_help_mode = '121'
          value_help      = 'PREMJ'.(Help Name)
Regards
Vishal

CLM How to add search-help for extension field(New Company Field) in MA.

Hi all,
Based on demand,I need to extend a new field(Company) in Master Agreement.
But I do not know how to add search-help for this field,just like User Accont page.
Anyone can help me ?thank you very muck.
Regards,
JackyCheng

Hello Jacky,
To combine all the answers above and have a topic-based reply please go through the below steps:
#1. Inactivate the current extension field Company (I see it is actually a String value and this is not what you want to have)
#2. Go to Setup -> System Setup -> Extension Reference Types
Check if you already have a Company reference type
If not, create a new Extension Reference Type for Class Company. Fill in all required information.
#3. Create a new Extension Attribute
Select Data Type: Object Reference
Now you can add the Company type as reference
Regards,
Bogdan Toma

How to add search help for standard field LIKP-TRAID

Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
Abhi

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

How to create Search Help For Ztable fields

Hi all,
Please let me know How to create Search Help in SE11(what are the parameter i should pass)
and How to maintain search help for Ztable fields at DIctionary level (in SE11) and programming level.

hello .
there are two types of search helps .
1. elementary search help .
2. collective serch help
Below are the steps to create elementary search helps :
1 In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
2.then youget a option elementary or collective search as per you r need .
3.select Elementary search help and choose
4.write explanatory text in the field Short text.
5. in the selection method give the name of the table or a view .
6 . Select the fields that should be used for value selection or in a hit list .
7. then define the attributes of the search help .
8 Select the IMP flag if it is an import parameter. Select the EXP flag if it is an export parameter.
9 .define the dialog type of the search help.
The dialog type tells how the hit list will be displayed in the input help.
10 . save and activate .
plz reward if usefull
Thanks ,
Abhishek .

Hi how to attach search help to a field

hi all,
how to attach search help to a field.

hi
Attaching a search help to a field
A search help can influence the behavior of a field when the input help is called. The search help must be assigned to the field in order to do this. You have the following options for this assignment:
Attach search help to a data element / table or structure field / screen field / check table.
Conventionally search helps are attached to table fields or data elements. We shall see the same.
Attaching a search help to a table field
Choose the field name, click on search help tab and
provide the name of the search help.
A search help is attached to a field of a table or structure in the maintenance transaction for this table/structure, analogously to attaching to a table. You must assign the interface parameters of the search help to any fields of the table/structure. The search field must be assigned to an EXPORT parameter of the search help at this time.
Attach the search help to the table field
The search help ZSTRAVELAG_NAME is therefore directly attached to the field AGENCYNUM of table ZSTRAVELAG.
Attaching a search help to a data element
Provide the search help name and the parameter name
under the further characteristics tab of the data element.
If the input help of a field is defined by its data element, no further screen fields can be used in the input help.
Also note that the input F4 help would be available wherever the data element is used.
Attaching a search help to a screen element
A search help can be directly assigned to a screen field in two ways.
The name of the search help must be entered in the Screen Painter in the Attributes for the field in the field Search help.
The name of the search help can be defined for selection screens in ABAP reports in the PARAMETERS or SELECT-OPTIONS statement directly following the supplement MATCHCODE OBJECT.
However, input help is only available for this particular screen.
In this case, the search help is only available for this screen.
IF YOU WANT TO ATTCH A SERACH HELP TO THE SCREEN FILED THIS IS THE CODE
TYPES : BEGIN OF ST_OBJID_SH,
OTYPE TYPE HRP1000-OTYPE,
OBJID TYPE HRP1000-OBJID,
END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
************SELECTION SCREEN DESIGN************************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
***********END OF SELECTION SCREEN DESIGN******************
**********VALIDATION FOR SCREEN FIELDS*********************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
* IF S_OBJID IS NOT INITIAL.
SELECT OTYPE OBJID FROM HRP1000
INTO TABLE IT_OBJID_SH
WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
* SEARCH HELP FOR QUALIFICATION.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
RETFIELD = 'OBJID'
* PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'S_OBJID'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
VALUE_ORG = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
VALUE_TAB = IT_OBJID_SH
* FIELD_TAB =
* RETURN_TAB = RETURN_TAB
* DYNPFLD_MAPPING =
* EXCEPTIONS
* PARAMETER_ERROR = 1
* NO_VALUES_FOUND = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
REWARD IF USEFULL

How to create search help on a parameter

Hi all,
How to create search help on a parameter .Please tell me process .
Regards,

Hi,
If you want to create search help in parameter check that search help is available
by going to se11 or
create search help there ..
Please check the following links to create a search helps. They guide you step by ste.
Link:[http://www.sap-img.com/abap/attach-a-search-help-to-the-screen-field.htm]
Regards
Vinu.r

How to add search help to custom infotype listbox??

Hi All,
How to add search help to custom infotype listbox??
Thanks in advance

Hi Vinay,
We have search help and list box as 2 different options.
At a time we can make a field a list box or a search help.List box is restricted and we can pick values from the defined list whereas in search help we can allow more entries and then validate the value entered later.
Implementing a listbox or search help in infotype is same as that of implementing it in a modulepool .
for search help..we can create a custom search help or check for existing search help in se11
then in the screen on infotype field..assign the search help direcly at the screen painter level..
double click on the field in screen painter -> change mode and then in the space for "search help" enter the search helps name
for list box..in the screen painter ,make sure the field is selected as list box..then in PAI of screen we do a
(Process on value-request..field fieldname module module name)..check syntax and other details...
Using function module vrm_set_value fill the field and populate it as required
Pls check and revert
Regards
Byju

How to add search help to customer field of field selection on ESS Screen?

Hi all,
I am able to get customer field CUSTOMER01 from field selection customization on leave application ESS Screen. How to attach search help which contains Holiday date & its description to this field?
Thanks,
Swapnali

Hi,
This is for working time -> leave request screen
In field selection there is one field 'code for description of illness'. I have done required config for getting this field on ESS Screen. This field already has standard search help. So I m able to view the values of this field on ESS screen .
So I thought to try assigning custom search help to this CUSTOMER0 field. Is there any method in BADI PT_ABS_REQ through which I can achieve the same. Please help.
-Swapnali

How to connect search help to pa0001

Similar Messages

Maybe you are looking for