How to connect second computer

How do I connect a second computer to my wireless network.
First computer is a laptop and connects fine.
Do I have to download drivers etc to the second computer?
I have been to the drivers & software page but the advisory videos don't download for me so I don't know EXACTLY and HOW MUCH  to download.
I am in Australia.

Hi,
Double post. Please use:
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/How-to-connect-second-computer-to-Deskj...
Thanks.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How to connect second computer to Deskjet 3520 e-All-in-O​ne

    How do I connect a second computer to my printer (see subject line) which is connected to my wireless network.
    First computer is a laptop and connects fine.
    Do I have to download drivers etc to the second computer?
    I have been to the drivers & software page but the advisory videos don't download for me so I don't know EXACTLY and HOW MUCH  to download.
    I am in Australia.
    This question was solved.
    View Solution.

    Hi,
    The above link contains all software and drivers (for Windows from XP to 8.1). Please download it, save on your computer (remember where) and run downloaded file on your computer. You can copy it and run on 3rd , 4th, 5th ...  or more computers, no need to download again. Note: for Windows only.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to authorize second computer with one id

    How to authorize second computer with one id in digital edition

    Dear Dominic,
    When I try to authorize my laptop, after writing my username and password, I get the message  "You can only authorize this computer with an ADOBE ID that hasn't been previously used to authorize any other computer or mobile devices. Please try again"
    That means it doesn't PERMIT me to aythorize my second computer (a laptop) with the same adobe ID (that was used for my first computer, a PC)...
    Thank you in advance for your help...
    Nikolas

  • Does anyone know how to connect there computer to the enternet using iphone

    I was wanting to know how to connect my computer to the internet using my iphone.

    You can't, not supported

  • Connecting second computer - problem

    I have been trying to connect a second computer to an existing Airport Express network - and have failed miserably so far. I have the sneaking suspicion that I'm missing something obvious here - so any pointers will be greatly appreciated!
    I have an Airport Express and a 1-year old Powerbook G4. The Airport is connected to a cable modem. Everything works fine.
    The second computer is a 17-inch iMac G5. I bought an Airport card and installed it following the instructions. I've done this kind of stuff before so I'm pretty sure it's not an installation problem.
    But my iMac won't detect the Airport station.... I've read the manual, tried to follow instructions, fiddled with the settings, moved the computer closer to the airport station, etc. etc. Nothing improved the situation.
    I have also tried setting up a computer-to-computer network. The Powerbook then recognises the iMac and I can enter a password. So I presume the Airport card is working... But afterwards, I don't see any new volume under "Network" - which is where I would expect to find the iMac now. Mhm.
    I apologize if this is all a bit unspecific - but I'm happy to provide further clues if pointed in the right direction.
    Many thanks in advance for your help!
    Sebastian

    I have a similar problem
    and i am not too compter literate
    I have a dual g5 hooked to an extreme DI-624 wireless router with tiger.
    it works perfectly wireless.
    I have my secondary computer, an old emac with an old airport card (slow b version) on panther.
    I just installed the airport card (b) but it does not see my network on the dual g5. it sees other networks around the area.
    how do i get it to see the g5 network???
    phil

  • TV Apple TV MacBook Air:How to connect my computer's monitor and TV as multiple monitors (NOT mirroring)

    I have an insignia TV, an apple TV I just bought less than a month ago, and a Macbook Air (mountain Lion) and a MacBook pro (mountain lion).
    I am able to connectboth of my computers with the TV to mirror my screen/monitor, but I have not been able to figure out how to use the apple TV to use my TV as a second monitor, like I was able to do with my HDMI cable. 
    when I bought the Apple TV the person who I talked to at the store told me I would be able to do it, but I havent been able to do it through system preferences and the options for display only show as mirroring through Airplay. I dislike mirroring because while I play something on my computer (or somebody else does) I'd like to still be able to use my computer for browsing or doing homework.
    Please help me find a way in which I can make my TV as a second monitor tu my computer without having to have an HDMI cord across the room. I have a puppy and I have had problems with that. That is actually the reason why I considered buying the Apple TV device.
    NOTE: In case you know a way to connect my TV to my Macs I have a time capsule and my TV has a DVI, two HDMI, and a USB ports.
    thank you!
    Lydia

    Morning jotref,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    About AirPlay Mirroring in OS X Mountain Lion
    http://support.apple.com/kb/ht5404
    Best of luck,
    Mario

  • How to connect second skype phone

    I recently had to replace the skype phone which is near my computer.  I have another skype phone in a different room.  Calls do not ring to the second phone.  How can I fix this please.

    finfoote wrote:
    i have a seperate skype phone which i plug into the side of my laptop but i have no idea how to use it. any feedback would be helpful. thanks in advance.
    Hello,
    In order to assist we need you to advise which make and model # of phone you have.
    Thank you.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • HT1600 How do connect my computer through AppleTV

    How Do I connect Apple TV to my computer?

    Enable home sharing in iTunes and enter the home sharing ID you create into AppleTV.  You will also need to enter your AppleID into the AppleTV iTunes Store menu to beable to access your any iTunes content you have on iCloud.

  • How to connect 2 computer in LabVIEW?

    Hi,
    I currently trying to send an input that I put from computer A to be output in computer B. I read that I need a shared variable for it, and I already set the shared variable. My main problem now is how to establish a connection/communication to the other computer? I tried reading in the forum but got confuse on how to use it. Anyone had a simple method on how I could do it?
    Thanks
    Ridhwan Ali
    Solved!
    Go to Solution.

    Cool! I had a look at the examples and test it. It works.
    Here are the steps that I took: (*I had both of my computer connected through a router which I used to connect both of them to the internet, i just plug Ethernet wires from both computer to the router, that's all, no configuration needed)
    1) Open Data Server.vi in my 1st computer
    2) Open Client Server.vi in my 2nd computer
    3) Search for my 1st computer IP address by going to the
    Start (at 1st computer) >Run>enter "cmd">type "ipconfig"
    4) Search for my 2nd computer IP address by going to the
    Start (at 2nd computer)>Run>enter "cmd">type "ipconfig"
    5) Ping the 2nd computer from the 1st computer to check if the connection is ok.
    Start (at 1st computer) >Run>enter "cmd">type "ping [2nd computer IP Address]"
    7) Set the port number in Data Server.vi to any desired number (in my case I just choose 6350)
    6) Run Data Server.vi
    4) Set the port number in Client Server.vi to match the one in Data Server.vi (in my case 6350)
    7) Run Client Server.vi
    8) The waveform should appear in the graph in Client Server.vi
    9) SUCCESS!
    *now I can change/modify the desired transmitted input to any input I wanted!
    Thanks

  • Connecting second computer only tries to authenticate connection

    I have finally gotten the Cisco e1000 connection with my laptop. I would like my wife's laptop to take the main connection rather than a non-encrypted guest connection. When I use Cisco connect and try to connect my wife's laptop to the network it connects but remains in the authenticating connection status. 
    It eventually chooses the second connection which is guest status.
    What am I doing wrong that won't allow the connection with router to finally authenticate; I have tried to run the Cisco connect "connecting a device" part but it does not seem to work.

    E1000 router uses WPA2 type encryption.
    this is what i think:
    1. If your if your computer is running XP, check if it has SP3, if not update it
    2. If your wireless adapter is Atheros, that one has issue with wireless-N routers (check other forum sites)

  • Connect second computer

    My daughter is home form college for the summer and would like to connect to the internet with her macbook pro laptop. How can I do this? We have a westell 6100f modem. Have talked to Verizon support and have had a hard time understanding them both technical and english.

    Do you have a Ethernet Hub/Switch or a second router?
    The reason I ask is because...
    Unless I am mistaken, the westell 6100f has only one LAN port and USB. And you can not use both the USB and the ethernet ports at the same time.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Voyager 220v Router - How to connect 2nd. computer...

    I have already installed the USB drivers from the setup CD and my main computer is successfully connected via the USB port on the 220v Router.
    I now want to add a laptop and I understand that this can just be directly connected using the Ethernet cable without needing to install anything else. So the setup CD does not need to be inserted in the drive.
    Is this correct?
    Can I insert the Ethernet plug in the router socket without having to switch the router off?

    Thanks John.
    Just one query arises from your answer though. You say connect both by ethernet for better connection but the Voyager 220v only has one USB port and one Ethernet port.
    On the BT Business Forums someone asked the same question and a BT Employee said to use the other computer connected to the other port.
    BT Business Forum
    The other computer I want to connect to the ethernet port will be in the region of 10 to 15 metres away using an extension lead with coupler so that will have to be on the ethernet port anyway to avoid loss of signal.

  • How to connect macintosh computer to Linkysy

    Hi, I have a imac G5 which needs  a wireless internet connection via Linksys.  I just placed the Xtreme Airport card in it and tried to connect the internet but it doesn't recognize the Linksys.  So, if anybody faced the same problem and solved it, please, help!  I called everywhere including Linksys and everybody seems to throw the ball to each other and none of them has a clue.
    Thank you.

    Please see the following instructions to configure your AirPort Wireless Adapter with a Linksys Wireless Network using either a Linksys Wireless Access Point or Wireless Router.  Before you begin, make sure you have Apple AirPort software version 1.3 (or later) installed. If you are not certain about this, contact Apple.
    Configuring the Airport Adapter
    1.      From the Finder (desktop) click on the Apple menu, then click on the System Preferences option.
    2.      After the “System Preferences” window opens, click on the Network option under “Internet & Network”.
    3.       When the “Network Preferences” pane opens, select AirPort under the “Show” section.
    4.       After selecting “Show:  Airport”, click on the AirPort tab.  When the “AirPort” area opens, tick the option for Join a specific network and input your SSID into the “Network” field (linksys is the default SSID for all Linksys wireless products).  Also be sure to have the ShowAirPortStatus in menu bar option clicked.
    Note:  If you’re using WEP on your wireless network, input “Key 1” or “Key” from your Access Point or Wireless router into the “Password” field, please input all letters in UPPER CASE
    5.       Click on the Apply Now button to save your settings.
    Configuring TCP/IP
    We recommend setting your TCP/IP for DHCP if you’re using a Linksys router on your network.
    1.      Click on the TCP/IP tab, and select Using DHCP from the “Configure” dropdown menu.
    2.                   Click on the Apply Now button again to save the TCP/IP options.
    3.                   Power down your computer and power it back up.
    ·         If you do not have access after powering back up
    a.      Click on the AirPort icon in the “Menu” bar, and make sure that the “Airport: Off” option is not grayed out, if it is, click on the Turn AirPort On option.
    b.      If you click on the AirPort icon in the “Menu” bar and find that the option for “Airport: On” is grayed out, then click on the SSID and you should get a connection.

  • Connecting second computer

    I have just installed BT Infinity which works well (most of the time) on my main computer. However when I try to connect by laptop (which is a Mac Book) it will work occasionally. When I enter my wireless key it comes up with a connection timeout message. I have tried connecting with an Ethernet cable but that still does not work.

    Hi Curlymac,
    Make sure that you have fully updated MacOSX and then Repair Permissions.
    Next, I suggest that you delete any previous setups for any older HHs (or other routers that you no longer use) from the Airport Network settings (Advanced button) and then delete any old unused passwords in your Keychain. These things laying around sometimes cause this sort of issue.
    Then re-boot your MacBook and try connecting again.
    You could also try manually setting a specific wireless channel in the HH settings to see if co-channel interference with a neighbour's router is the source of the problem. iStumbler may help you to check for this problem.
    If you continue to have problems, you could request a replacement Infinity HH.
    I have set aside my Infinity HH and use an Apple Airport Extreme. Goes like a train and the dual-band wireless gives me dramatically better coverage that the HH does.
    Recent MacBooks can work on either 2.4GHz or 5GHz wifi, but the sensing is automatic and cannot be changed manually.

  • How to connect my compute to the Internet throgh my iPhone

    Hi all I can't find on setting personal hotspot
    And I would like to know I'd be able to connect to the Internet
    On my laptop through my iPhone ?

    Have you subscribed to a plan with your carrier that provides this feature?
    iOS: Understanding Personal Hotspot
    iPhone: System requirements for Personal Hotspot

Maybe you are looking for