How to connect siemens S7-300 PLC

Dear Sir,
I am using labview 8.2 and i want to connect siemens S7-300 PLC. Please suggest me how can i connect it with labview 8.2?

Ran across this similar message which points to this KB article which you may want to look at.

Similar Messages

How can I write to a Siemens S7-300 PLC tag from OPC Server.vbai page by using a Knob object ?

I am using NI OPC Server and I can read Siemens S7-300 PLC tags such as thermocouple values from the PLC. Additonally I can write manually a constant value to that tag by selecting it in the NI Distributed System Manager. And I can read the written value from NI Distributed System Manager or from NI OPC Server. But I can not write any value to the S7300 PLC tags such as by using a knob object at the NI Vision Builder AI Inpection (.vbai) page.
Any help is welcomed. Thanks in advance.
Attachments:
manual_writing_to_plc.png ‏298 KB

The tutorial at the following location explains how to use Vision Builder AI as a OPC server.
https://decibel.ni.com/content/docs/DOC-18647
http://www.ni.com/white-paper/13574/en
To allow VBAI to connect to an OPC Server (i.e. act as an OPC client), you need to purchase and install the DSC Run-time System.
Once installed, you can create an OPC I/O client using the Distributed System Manager, create variables bound to OPC tags, then create VBAI network variables that are bound to these variables.
Another possible technical solution to connect to OPC Servers supporting Data Access 2.0 is to use the datasocket API in a Run LabVIEW step.
http://forums.ni.com/t5/Machine-Vision/Read-and-Write-with-OPC-through-NI-Vision/m-p/2048278/highlig...
Hope this helps.
-Christophe

Connecting a Siemens S7-300 PLC to NI OPC Server

As a part of the final year Bachelor Thesis project I and two others are involved with, I have been tasked with setting up an HMI/SCADA system to control level and flow in several water storage tanks. This is to be done locally via a "Operator Panel" and also remotely over the Internet via webbrowser. These storage tanks and control system is placed on a wheeled demonstration model so it can be used in classrooms and auditoriums. As such, I have a Siemens S7-300 PLC and the latest edition of LabVIEW (2009 Professional Ed.) available to me. In order to create a HMI system, we will also acquire the NI DSC module as it should have everything we need (NI OCP is included?).
Since this is a bachelor project and the school is basically paying for everything, we are on a rather strict budget. This means that we currently haven't settled on a solution for the "Operator Panel" since this would be dependent on how the PLC and panel interfaces. What we would like to do for simplicity sake is to use commercial laptop computer with touchscreen capability thus having a low cost "all-in-one" solution, both for local input & control and web publishing capability. Now, most computers today doesn't have serial comports anymore, but rather USB ports.
On the OPC server webpage under the OPC Device Connectivity heading, it is specifically stated "Siemens HMI Adapter for S7-300/400 via Serial with HMI adapter". I assume this refers to the following Siemens product: https://support.automation.siemens.com/WW/llisapi.dll/csfetch/8774263/hmi_adapter_x.pdf?func=cslib.c... (6ES7 972-0CA1X-0XA0).
Does this mean that the OCP server can only use a Serial connection via the HMI adapter for the S7-300 directly? Would it be possible to use a driverless Serial to USB adapter with the HMI adapter, or for example the Siemens CP5711 MPI to USB adapter? If it is not possible to use a USB based solution, We would have to use an older desktop PC with an serial comport or an additional PCI card and that is something we would like to avoid.
Any help on this matter would be highly appreciated.
-- DanJack, NUC Norway
Solved!
Go to Solution.

now this is a problem the PLC S7300 does not support some functions of communication when you want to make a simulation may not be accessible from OPC Server, this by PROFIBUS Siemens USB / MPI + PLC S7300/400 protocol adapter cord
Atom
Certified LabVIEW Associate Developer

Can i connect Labview 8.5 with Siemens S7-300 PLC with Rs-232 protocols

Hi....I want to interface Siemens S7-300 PLC with Labview 8.5.....The PLC has MPI to RS-232 PC Adapter (6ES7 972-OCA23-OXAO).....i have made a GUI on Labview 8.5 and want to bring Voltage and Current data in realtime in Labview and Display that......Please help me.....
Thanx

You should open the Example Finder (Help -> Find Examples) and take a look at the serial communication examples. They should be able to do what you want.
However, I do have to point out this: "want to bring Voltage and Current data in realtime". Define "realtime". Do you mean you're working on a Real-Time OS?

Connection of Siemens S7-300 PLC to NI OPC Server 2012

Hi,
My name is Gevorg.
I am going to create a communication between S7-300 (CP 343-1 Lean) and NI OPC Server 2012.
As per my investigations, NI OPC server does not have appropriate drivers for S7-300 PLCs. At the other hand I could find any documentation, that prooves that S7-300 supports OPC protocol.
Does anyone have any experience of using S7-300 PLCs?
What protocol does it support?
Could you please help me..
Attached you can find the datasheet of S7-300 PLC.
Thank you in advance,
Attachments:
OPC server.png ‏64 KB
GH_CP343-1-Lean-CX10_76.pdf ‏1563 KB

https://decibel.ni.com/content/docs/DOC-38858
Atom
Certified LabVIEW Associate Developer

Siemens S7 300 PLC Communicationnd with Labview

hi;
I'm trying to connect my PLC s300 with labview in my PC .
How can I proceed ?
what is the easiest way to do the communication knowing that I did the simulation using TCP/IP protocol with OPC server.
I have SIMATIC net station and CPU 315 2-DP
any suggestion?
I want to use OPC server with MPI can I do so ? amI supposed to add materials and what are those materials ?
Thanking in anticipation.

sivaramkumar wrote:
Hi.I am using a CP-343 communications processor
to connect the S7 300 to industrial ethernet. Now can I commnicate
directly from Labview to the PLC?We are plan to use ethernet communication (our TCP VI's).
Which type of command we need to ues. whether we need to form a MODBUS protocol command.
Siemens S7 supports all kinds of protocols. Some are built in from start and are usually Siemens specific protocols whose specs are not always easy to come by, others can be purchased and installed on the communication processor seperately such as Modbus. Once you have the Modbus library installed on your S7 you can simply use the Modbus VIs downloadable from the NI site to communicate with your S7 datablocks.
It is a strict IO access meaning you can read and write IO registers and memory datablocks, but not interfere with the actual programm on the S7 in other ways.
Using Modbus is simply and hard at the same time, since Modbus uses various datatypes with different address ranges that are mapped in some way to the items in the target hardware. This mapping can be tedious to work out correctly since the documentation of devices is sometimes quite a bit unclear about how exactly that has been done by the manufacturer.
There are many other Ethernet protocols that are available or can be installed on a S7 such as Profibus Ethernet, EtherCat, Industrial Ethernet, etc. Most of these while technically possible to be implemented on top of the native TCP LabVIEW nodes are rather complicated and therefore anything but trivial to create a VI library for.
Your best bet really is to either use Modbus or an OPC Server that implements the native access to the PLC.
Rolf Kalbermatter
Message Edited by rolfk on 03-12-2009 09:07 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Siemens S7 300 PLC Labview Communication

Hi.I am using a CP-343 communications processor
to connect the S7 300 to industrial ethernet. Now can I commnicate
directly from Labview to the PLC?We are plan to use ethernet communication (our TCP VI's).
Which type of command we need to ues. whether we need to form a MODBUS protocol command.
Thanks
Siva

sivaramkumar wrote:
Hi.I am using a CP-343 communications processor
to connect the S7 300 to industrial ethernet. Now can I commnicate
directly from Labview to the PLC?We are plan to use ethernet communication (our TCP VI's).
Which type of command we need to ues. whether we need to form a MODBUS protocol command.
Siemens S7 supports all kinds of protocols. Some are built in from start and are usually Siemens specific protocols whose specs are not always easy to come by, others can be purchased and installed on the communication processor seperately such as Modbus. Once you have the Modbus library installed on your S7 you can simply use the Modbus VIs downloadable from the NI site to communicate with your S7 datablocks.
It is a strict IO access meaning you can read and write IO registers and memory datablocks, but not interfere with the actual programm on the S7 in other ways.
Using Modbus is simply and hard at the same time, since Modbus uses various datatypes with different address ranges that are mapped in some way to the items in the target hardware. This mapping can be tedious to work out correctly since the documentation of devices is sometimes quite a bit unclear about how exactly that has been done by the manufacturer.
There are many other Ethernet protocols that are available or can be installed on a S7 such as Profibus Ethernet, EtherCat, Industrial Ethernet, etc. Most of these while technically possible to be implemented on top of the native TCP LabVIEW nodes are rather complicated and therefore anything but trivial to create a VI library for.
Your best bet really is to either use Modbus or an OPC Server that implements the native access to the PLC.
Rolf Kalbermatter
Message Edited by rolfk on 03-12-2009 09:07 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Interfacing LabVIEW with SIEMENS s7-300 PLC

Hi all,
Im using LabVIEW 8.6 and DSC module I want to interface S7-300 SIEMENS PLC with LabVIEW. I've gone through the turorial on the NI site " Connect LabVIEW to any PLC". By following the tutorial when I am trying to create I/O server in the registred OPC servers window there is nothing what would be the reason. Also there is no specific information available about the hardware connection etc. Kindly help me through this or suggest some tutorial links. What about the PROFIBUS and MPI. I know the information i am giving is not specific and focused but I've tried to tell all of you to atleast understand what I want to do. Hope you people help. THANKS.
Naqqash

Hi,
Lookout is our legacy OPC software that was phased out by the DSC module. You can read about both here: What is NI Lookout? and What is DSC?
You can find a great introductory DSC tutorial here: Getting Started with the LabVIEW Datalogging and Supervisory Control Module. A couple other places to get started: NI Module Training (look for DSC) and Connect LabVIEW to Any PLC Using OPC Webcast
As for simulating your hardware, if you have a 3rd party simulator that will imitate your hardware, you might be able to fool DSC into thinking that there is actual hardware connected, but DSC does not include simulating capabilities itself.
Cheers,
Misha

Siemens S7 300 PLC and Labview Communication

Hi,
I am attempting to communicate between Labview 7 and a Siemens S7 300 (CPU 314) PLC. I would prefer the communication to be over Ethernet or RS 232. Could you help me out with this implementation and let me know what additional hardware/software I may require for doing this.
Thanks,
Shameek

Shameek wrote:
I am using a CP-343 communications processor to connect the S7 300 to industrial ethernet.
Now can I commnicate directly from Labview to the PLC?
I still havent figured out where the OPC server comes in and whether it is an option or a necessity.
Using OPC is an option.
Siemens has an the add-on ($$) library/FB that includes code for enabling Modbus communication with S7 300 CPUs. I've never used it, but info is here.
<snip>
Our solution
With its MODBUS function block (FB) and the CP343-1 and CP443-1 SIMATIC S7 communications processors, Siemens can supply a proven solution for the integration of SIMATIC automation systems into other system landscapes. This function block enables data to be exchanged easily between MODBUS-compatible devices from different manufacturers and SIMATIC S7 stations from S7-300 and S7-400 systems.
</snip>
=====================================================
Fading out. " ... J. Arthur Rank on gong."

Connecting cRIO with Siemens S7-300 using OPC UA

Dear all,
I am looking for an example program (labview and siemens S7) to create a connection between a cRIO and a Siemens S7-300 PLC.
If an example program is not possible, some tips and tricks to set this up are also helpfull.
thanks

Hello Poema,
I am aware of the different OPC Standards that exist and have worked both with OPC DA and OPC UA.
The previous month I was even working on a demo that implements an OPC UA Server that appropriately taht automatically links the Shared Variable Engine variables to published items with appropriate quality statuses (eg. Open thermocouple detection.
I would suggest you first create an OPC UA server that doesn't require certificates and that we first focus on making that use case work.
This will be easier and afterwards you'll only have to add the certificates.
Can you tell me how you are at this moment seeing/determining that the connection has been made?
Do you have some more details on the "internal siemens driver" you are using?
Personally I'm not so familiar with Siemens OPCs (have only used them via OPC DA).
Therefore, I would like to ask you if you can refer me to a reference document concerning the "internal siemens driver" or configuration manager you are using (or can use) at your side.
I'm actually looking for a document similar to this one for another manufacturer:
http://www.kepware.com/Support_Center/SupportDocuments/Help/opcuacm.pdf
Kind Regards,
Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
CLD, CTA
If someone helped you, let them know. Mark as solved and/or give a kudo.

Which protocol is recommended to communicate between LabVIEW an the S7-300 PLC?

Hello,
I'd like to communicate between LabVIEW (CompactRIO) and the S7-300 PLC.
Which is the protocol NI recommend to use?
I read, that TCP/IP over OPC and profibus work fine. Maybe MPI or Modbus, too.
But I would favor a cheaper solution like the communication directly over TCP/IP. The problem is in my opinion, that Siemens modified the TCP/IP protocol and the protocol itself is not public. I found an example library at ni.com but this was build by using reverse engineering. And I'm not sure, if such a library would work reliable.
I know this topic is interesting for many people, but I could not find a general recommendation here in the forums.
Regards

I have direct experience using the NI OPC servers to talk to Siemens S7-300 PLCs, and it's by far the easiest way I've found to communicate. There may be 'less expensive' options out of the box, but from purely a development standpoint, it's very fast and easy to get working.

Connection Siemens PLC S7 300 via CP1613 PCI card (via SImatic net software) with Lookout scada

Hi,
for automation one mill is used Siemens PLC S7 300, CPU 317-2DP. It communicate with PC station where will be installed Lookout scada, via Siemens ethernet card CP1613 A2. Also, on PC station is installed SImatic net software for making link between CP1613 and PLC via industrial ethernet connection. Also, Simatic net software can adjust as OPC server for PC clients. And my question is: how can I connect Lookout with SImatic net software? Is it possible? What is need to adjust or add in Lookout for exchange date between this points: Lookput and S7 300 PLC.
Thank you in advanced,
Ognjo

Use OPCClient object in Lookout. Set up the OPC Server, including the configuration of items, then the OPCClient is able to connect the OPC Server and read or write items. In this way, Lookout just talks to the OPC Server. The communication with the PLC is handled by the OPC Server.
Ryan Shi
National Instruments

How can i connect LabView to a PLC or Profibus without using OPC?

I can access data from the PLC or through the Profibus using OPC. Unfortunately is this not fast enough since I need a faster sampling rate. Are there any faster ways to access the PLC data? I’m now using Siemens S7-300 and CP5613 with the driver S7-5613.

Hi Boris.
This tip can be very helpful to me, tanks!
Best regards, Martin

Connecting between labVIEW and PLC S7-1200 using EPICS

Hello everyone,
I'm trying to connect between LabVIEW and PLC S7-1200 using EPICS. I did it using OPC and it succeeded and the communication was done, so right now i'm trying to do it using EPICS. so Can anyone help me with that?
Thanks in advance.
Ahmed

Hello,Ahmed:
Now I'm trying to conect S7-1200 to Labview by OPC server 2012, I'm newer for both PLC S7-1200 and OPC server. by the help file of NI's OPC I tested many times, but lost totally.
You mentioned that you have succeeded making the connection between them, could you please help me :
1) How to set in Simense TIA software? I can set the PLC's IP address now, that's all;
2) OPC server setting.
if there is a video, that will be great.
thanks a lot.
Delphi77.

Connection Siemens TC65 to PC via serial port

I don't connect Siemens TC65 via serial port . How can I do this? How can I upload java code in tc65..
Is there anyone to solve this problem?

tajava
Welcome to the forum. Please refrain from posting in old threads that are long dead. When you have a question, please start a topic of your own. Feel free to provide a link to an old thread if relevant.
I also suggest you go through these links before posting again:
[How to ask questions the smart way|http://catb.org/~esr/faqs/smart-questions.html]
[How To Get Good Answers To Your Questions|http://www.tek-tips.com/viewthread.cfm?qid=473997]
I'm locking this thread now.
db

How to connect siemens S7-300 PLC

Similar Messages

Maybe you are looking for