How to connect Skype 2 VoIP?

Hi everyone!
If you have VoIP (from real numbers) and operators team behind it, how can you add skype there? I mean some kinda forward or adding skype before (to collect call statistics as it was).
Thanks

I find that the quality of Skype verses AC (Adobe Connect) are on par i.e. if the audio is bad in Skype it is normally bad in AC, if the audio is good in one it is good in the other. The real problem is not so much the one product verses the other but more what is the bandwidth that is available.
Break out rooms. Yes you can use VOIP to access the different classes. As a host/Presenter you can access each class seperately and listen to what they are sharing, at the same time you can chip in and talk to the class without any of the other classes hearing what you are saying.
I hope that helps you out.
Dimitri

Similar Messages

  • Living in Japan and I'm an American who just signed up with Soft Bank the phone service here and spent a TON of money on an iPhone. I can't figure out how to connect my bank account at home to my app account so I can Skype my family. Please help!!!!

    Living in Japan and I'm an American who just signed up with Soft Bank the phone service here and spent a TON of money on an iPhone. I can't figure out how to connect my bank account at home to my app account so I can Skype my family. Please help!!!! I don't have a credit card nor do they gove debit cards to foreigners here, or at least it's really hard so I'm using my bank at home and still have a debit there. My phone number is 8 numbers plus the country code which is strange! Another thing is I was given a phone email that I was told to use for texting but I'm not sure how that works!! It's so frustrating too because no one speaks English here and I'm not very tech savvy. God bless you if you can help :)

    whichever app store you are connecting to, hyou need a credit card with an address in that country. Also, itunes gift cards must be in local currency too.
    If you are in japan, you need to use the japan app store

  • How to use Mobile VOIP on BB9300

    Please guide me how to use mobile VOIP to make call from BB9300. Please advise

    You need to download and install the latest Ovi suite and install it on your laptop. Connect your phone to your laptop via usb or bluetooth in PC Suite mode. In Ovi suite, goto Tools > Connect to Internet. After setting your country and carrier, the suite will connect you to the internet via your phone.
    Note that this will connect you using your phone carrier's network, so you will incur data costs on your phone plan.
    If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers.

  • E6220 Classic - how to add a VOIP internet phone n...

    Hi,
    Can someone please help me with a VOIP problem on a Nokia E6220 classic?
    How to add a VOIP internet phone number to my phonebook?? or call a VOIP number without 3rd party software??
    The phone supports SIP and I successfully managed to get this working (i.e. it shows Registered through a 3G profile) but there doesn't seem to be any way to add a VOIP number to my contacts and/or call a number.
    Almost every configuration guide I've read says something like: 'After setting up the SIP settings, you need to add an internet phone number from the menu 'Phone -> Settings -> Connection -> Internet tel. settings' (which in my case is not there).
    To check the connectivity, I installed an application named 'Fring' which works with no problem but I do not really want to use this since it uses it's own SIP profile (meant to be slower) and there does not seem to be any integration with the Nokia contacts/phonebook.
    Could anyone please help me? or perhaps tell me if there is any way to install the 'Nokia Internet telephoney application'?
    Thanks in advance
    Paul

    Go to your contact and tap the edit button at the top right.  Tap the the new phone field that appears.  Scroll all the way to the end of the lables list and tap "Add Custom Label".  Type in your label.  The custom label will be added to the labels list and be available for your other contacts

  • No connect skype account - Skype account status

    No connect skype account -  Skype account status
    help / skype: [account name redacted to protect privacy]

    please provide a more detailed description of the problem you are experiencing.  include other relevant info such as the exact version of Skype you are using, error prompts or notifications being displayed, or a screenshot if possible.
    IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
    ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

  • How to connect my friends apple notebook through video call

    HOW TO CONNECT TO A FRIEND WHO IS USING APPLE NOTEBOOK FROM MY IMAC SUGGEST ME WAITING FOR A SOLUTION FROM APPLE TEAM SUPPORT

    Hi,
    Typing in all upper case is regarded and shouting here.
    Presumably as you have posted in the OS X 10.7.x (Lion) area you are running this version of the OS on your iMac.
    This will have iChat 6 on it.
    This can use AIM, Jabber and Yahoo IDs within the app.
    Apple IDS ending in @mac.com and iCloud issued @me.com and @icloud.com are also Valid AIM Screen Names.
    If you use Googlemail and Enable "talk" in the products there you can then use your Google Mail ID as a Jabber ID (although it has it's own Add Account option in iChat)
    Facebook has an option to Enable "Chat" which will give you a Chat ID variant on your name there and this can be used in iChat (or Messages) as a Jabber ID.
    The Yahoo Account will only do Text chats.
    It also has to be an actual ID registered at Yahoo.
    Chats are then AIM to AIM or Jabber to Jabber or Yahoo to Yahoo.
    So your Buddy will also need a suitable ID or Screen Name  for the relevant service.
    8:16 pm      Sunday; January 19, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

    how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

    You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
    Check your MacBook Pro model year against the list in this Apple tech note:
    About Mini DisplayPort to HDMI adapters
    Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

  • I need to know how to connect my macbook to the tv

    I ordered the mini dvi adapter for my macbook 13in and obviously it connects to the computer but i have no idea how it connects to the tv. Where does it go? and do i need something else to help connect it to the tv? I am really confused please help.

    Yep, Apple makes adaptors to go from the mini DVI on the macbook to almost any type of input that you TV will have. First check the back of your tube to find out what kind of input it has, and order the appropriate adaptor.
    Luck
    E

  • How to connect a Sony Bravia TV to the internet through your Airport network

    Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
    My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
    Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
    The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

    I have now had a detailed reply from Sony Europe and the way to do this is to:
    1.       Press Home on the TV Setup
    2.       Use the right and left arrow to select Setting.
    3.       Use the up and down to select Network, press Enter.
    4.       Select Network Setup.
    5.       Select Wireless setup.
    6.       Select Scan
    7.       Select your network
    8.       A new screen will appear asking for entering the security key.
    9.       Enter your WPA2 key.
    10.   Select Enter.
    11.   It will take you back to the same screen asking for entering the
    security key.
    12.   Press the right arrow.
    13.   Select Auto.
    14.   Press the right arrow.
    15.   Select Save and connect.
    These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

  • How to connect my Mac book Pro to a TV

    How to connect my MacBook Pro to the TV using HDTV cable

    I am assuming your TV has HDMI connector.
    In that case, if your MacBook is the retina-one, you have HDMI connector there too. All you need is HDMI cable to connect teh two.
    If your MacBook has thunderbolt port instead, you need Mini DisplayPort to HDMI adapter and HDMI cable.
    Hope this makes sense.

  • How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

    How to connect old aiport express to my new Airport Extreme?
    I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
    I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
    I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
    I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
    My Ipad says "base station e5713b cannot be configured."
    I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
    My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
    Sigve

    Hi
    Thanks for Swift reply.
    Yep - I in fact have two A1088 and one A1264
    I actually bought the new router because the Jensen
    router always lost connection to the Airport Express after some hours or days. I
    always needed to restart my Jensen to play music and that was driving my wife
    mad. The hope was that the Extreme should fix this. Both A1088 have been set up
    to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
    Are the A1088 now useless?
    The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
    Please advise
    Regards
    Sigve

  • How to connect my iPhone and iPad to Apple TV

    How to connect my iPhone and iPad to Apple TV

    Connect the iPad and Apple TV to the same WiFi network. Double Tab the home button on the iPad and then swipe your recently used apps from left to right until you see the mirroring icon which looks like a retangle with an up arrow. Tab that icon until you see the Apple TV. Tab Apple TV and slide the slider to the ON position. You should now see your iPad screen on the TV the Apple TV is connected to.

  • How to connect my ipod to itunes if my ipod is disabled and my top button is broken

    how to connect my ipod to itunes if my ipod is disabled and my top button is broken

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How to connect my perfectly-working 20-year-old Apple Personal Laserwriter 320 to my iMac running Mountain Lion?

    How to connect my perfectly-working 20-year-old Apple Personal Laserwriter 320 to my iMac running Mountain Lion?
              Thank you, Morty S.

    I have a perfectly-working LW 4/600 with exactly the same issue. They use localtalk - a long obsolete network connection, that doesn't connect to modern networks, and appletalk as the comm protocol.
    I think the only choice you have is to use an old powerPC Mac as print server. You tell me which old Mac you have, with a localtalk connector, or that runs OS X 10.4 or earlier (so it speaks appletalk), and I'll tell you how I've done it for the past 11 years or so.
    Right now I use a G4 running 10.4.11, plus an etherMac ethernet to localtalk adapter.
    Before, I used a PMac 6100 running LPD server software.

  • How to connect my phone with the cloud

    How to connect my iphone to the cloud so I can download Itunes

    Do you have an Apple ID, and are you signed in, go into your settings>iCloud to check.  You shouldn't need to download iTunes because that app is on your iPhone, could you give me more information of what you are trying to download. 

Maybe you are looking for