How to connect Smart Views against BIC2G OBIEE+ Analysis services

I am trying to run Hyperion Smart View 9.3.1.2.041 against OBIEE+ demo package BIC2G:EE+ v10.1.3.3.2-9.3.1-7.9.5 but I can’t get the connection to work.
The documentation or the package BIC2G:EE+ v10.1.3.3.2-9.3.1-7.9.5 does contain errors that makes it hard to set up and I have not found any useful documentation how to circumvent the "Unable to connect to the provider" message that I get during connection.

Good day!
Try to start the service (Hyperion Provider Services - Web Application). If it doesn't work, try to stop it and start it again.
I had this problem before.
Cheers!

Similar Messages

How to see Shared Members in Smart View on Ad-hoc Analysis mode

Hi All,
We are using Hyperion Planning v 11.1.1.3.
For the alternate hierarchy we have created shared members. But in Smart View we are unable to see Shared members hierarchy in Ad-hoc analysis mode.
Is this limitation in Hyperion Planning?
Or
Is there any way to see shared members Hierarchy in Smart View in Ad-hoc analysis mode?
It is urgent requirement Please let me know as early as possible
Thanks in Advance!!!

When you say open data form in Ad-hoc mode, can you do that? I think when you select Ad-hoc mode, you are basically connecting to Essbase and therefore need to manually select the members. (of course, I've got a 11.1.2 env right now so not too sure of 11.1.1.3)
I'm able to just go to Member Selection and select whatever hierarchy i want, Shared or Stored, when I'm connected to Essbase. When connecting to Planning, I dont have any option of opening the form as Ad-hoc mode.
Can you see the hierarchy if selecting the members using Essbase connection and not planning?
Cheers,
Abhishek

How I start smart view without error message?

Hello,
we use Oracle Smart View 11.1.2.5.215 and Office Professional Plus 2010 SP 2.
The installation run in an AppV 4.5 SP 2 Environment.
Smart View starts with the following error message:
Failed to create Smart View Extension Activator object. Verifiy that it is registered properly (-2147221164)
We have the newest .NET installation and install the excel shared features.
Directly of the server Smart View starts correctly.
The message just appears when Smart View starts over the NetMan Applications Link (Citrix + AppV).
Please help!
Thx, John

Hello,
now its several months ago that we post our Smart View problem.
Till now we have no solution. The oracle support can't help us
because we use AppV .
Use someone else Smart View in an AppV environment?
We want to go live soon and must handle the error message.
Thank you for your Support

Does anyone know how to connect with an external modem and AOL service?

i just got the macbook yesterday and the modem came today, and i cannot figure out how to connect with an AOL account using the external modem. does anyone know how, or have the same problem??
Macbook 1.83Ghz White Mac OS X (10.4.7)

Hi MacMan2006! And Welcome To Discussions!
Do you have the AOL software installed?
When you open System Preferences > Network > Location: Automatic & at Show: is there an option to select External Modem?
If so, is your Modem Model listed?
ali b

How to create Business View against SQL

We are moving from Crystal 10 to XI. Before moving we were using ASP application for dynamic parameters. Now we are planning to use Business Views or List of Values for these dynamic parameters. We are using IBM DB2 database and datasource is SQL Command Object. I have a list of dynamic parameters with SQL Statement. I want to know what is the best way to convert SQL Statement in Business View or any type of suggestion will be aapreciate.
Thanks

Hello Zahid,
I checked some articles but could not find any ideas how to answer your question.
Anyway, I am not sure if you have seen this [online BV Admin guide|http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_bv_admin_en.pdf].
Falk

How to connect smart phone to eprint

How do I connect and print from my android phone

You can actually access any supported file that is saved on your device from within the home and biz app itself. Simply go to photos or documents when the app opens. If it is a photo simply browse through the photos until you see the one you want to print out. If it is a document filetype you are looking for go to files after choosing documents, and this will show all supported files on the device without having to use the share function.
The app can also print over the local network without registering the app, and can print to most legacy printers that are networked but do not posess eprint functionality.
If you have any issues getting this set up or using the app, post back and ill see if i can help you out.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

How to use smart view plugin in firefox 2.0

Can anyone help me in installing and then how to use it in Firefox 2.0

Hi,
I am not sure about a plugin I always thought that smartview was for Microsoft Office and is accessed through Excel, Word, Powerpoint.
Cheers
John
http://john-goodwin.blogspot.com/

How to make a Gant Chart in OBIEE analysis

Hi all,
I have intergrate OBIEE 11g with my ERP system, module Project Management. Now, i want to make a Gant chart on BIEE to manage time of project.
But i can't see this chart type on BIEE, plz tell me how to make it.
Tks so much

Please refer to the following link on how to create gantt charts in OBIEE.
http://oraclebizint.wordpress.com/2007/12/06/oracle-bi-ee-101332-marquee-images-and-gantt-charts/
Thank you,
-Amith.

Unable to connect to essbase server with Smart View

Hi,
I'm having trobules connecting Smart View in order to make some adhoc analysis, however I could perfectly establish connection with Planning and navigate through web forms in excel.
The address I'm using to connect to Essbase is: http://<server>:19000/aps/SmartView and the planning url is http://<server>:19000/HyperionPlanning/SmartView
I've been already using those urls in other server with version 11.1.2 but now that I'm trying to connect to a server with v11.1.1.3 I just can't. Whenever I connect to Planning in order to see the forms a prompt appears with the message saying that "I'm connecting to a server with an older version" but I could perfectly work with the forms. When I connect to essbase, I can see the Applications but I just can't make any adhoc analysis.
Could anyone have any idea of what could be happening?
Thanks in advance
Edited by: user9143843 on Jan 13, 2011 4:58 AM

Thanks for your response, I've already checked that port and keep getting the same message "Common Provider null datasource error". I can see the applications but can't get any further than that, no analysis adhoc, no smart slice, only disconnect :(

Smart view cann't con EAS

I am confused,I conn't conn the EAS after I restarted the host via Smart View though Micsoft Excel 2007. the error is like"didn't conn the server,please ensure the host and port specified are correct".
I have started some services at the background, such as:
Oracle Process Manager
Hyperion Administrator Services Web-Application
Hyperion Foundation Services Managerd-Service
Hyperion Provider Services - Web Application
Hyperion Web Analysis - Web Application
Hyperion Integration Services
Hyperion Studio Service BPMS bpms1
Hyperion Financial Reporting - Web Application
I am very desire to kown the reason and how to solve the connection problem or the way of testing.thinks for your advince.

Oh So what i understand is u need to connect Smart view from excel to Essbase to retrive what bombastic figure u genrated :)
1. In Smartview options, click the Advanced tab and set the following in the Shared connections url:
http://machinename:19000/workspace/SmartViewProviders
Note: Make sure you can access HSS and Workspace on 19000 otherwise this url will not work.
2. Open the Smartview Panel, click on Shared Connections, and fill in your Shared Services username/password.
3. Click on the arrow next to the empty Drop Down List.
4. Select the 'Add New Server' option and fill in your Essbase Server information.
If you do not see the 'Add New Server' option in Step 4 this may be because Analytic Provider Services was configured after Shared Services. In which case please refer to the following Knowledge article for details on how to resolve this:
NOTE: Smartview 11.1.2 'Add New Server' Option Does Not Appear
Once the Essbase Server has been added you can then create connections for individual Essbase Applications and Databases. These can be created as Shared Connections, which can be used by all users. Alternatively, users can create their own local connections and save them as Private Connections.

Planning menus driven off of the Page dimension controls in Smart View

Apologies if this question is answered but I simply couldn't find an answer on the web, or in OTN, or on Oracle Support, or even (gasp) in the docs.
With that preamble...
I have a Planning form with popup/right click menus that, in a web browser -- IE9 in this case, can be called by right clicking on the row headers (or, with great difficulty in 11.1.2.2) the itsy-bitsy little Page dimension drop down triangles. Some (most) of the menus use the Planning Required Parameters feature to read row or page dimension members to pass the selected member as context to the new form.
So what about Smart View? Ah yes, in Smart View the row header right click allows the menu that uses Required Parameters to drive, for instance, Employee Detail for an Account (Planning passes the Account to a new form). It works just fine. This is the same as IE9.
But I simply cannot figure out how to make Smart View's POV display a popup/right click menu and of course pass that dimension member to the new form. Beyond reading the above sources, I tried just about everything i could think of in Smart View. Is it possible? If not, this would be a major bummer because the planners are not exactly in love with the ADF interface but do rather like Smart View.
Fwiw, it is Excel 2010 and Smart View 11.1.2.2.300 (Build 070).
Thanks,
Cameron Lackpour

Cameron
I've not seen someone using a menu in POV (There could be valid reason for you doing it).
11.1.2.2 If you are using an dimension in POV as required parameter IE shows it in POV, Smartview is not showing that option at all. (Right click on Form shows blank)
I tried it on 11.1.2.3 to see something got fixed there (or updated) and found that right click on row shows the menu item (POV). (You don't need to right click on POV)
Regards
Celvin

Studio Drill-Through Works in Excel Add-In but not Smart View

So I have a drill-through defined that works fine in the Excel Add-In. But, when I try to drill on the same intersection in Smart View, I get "No drill-through reports found at this location." I used the same member combinations for both, so I know the intersection is correct. Am I missing something simple?
-Brian

There are some limitations on drill through:
These are two ports >>transport.port and server.httpPort.used to communicate with Essbase Spreadsheet Add-in and Hyperion Smart View.
In Hyperion Smart View, drill-through will not work properly. You must refresh the port number stored in the cube by following the instructions in "Updating Cube Linkage" See the Essbase Studio Online Help or Essbase Studio User's Guide.
Change the HTTP Port Number:
If you add an entry for the server.httpPort property in the server.properties file to change it from the default setting of 9080, the following is the state of drill-through connectivity on cubes built prior to the port adjustment.
Note: Cubes built after the port adjustment will work properly. In Smart View, drill-through will work properly.
PS:
With shared connections, Smart View always connects first with the EPM Workspace Web application to authenticate the user and then connects to each provider using the EPM SSO token. With private connections, SmartView authenticates with the provider
Adding to solution if your using 11.1.1.3.01 try adding PATCH:9779433 will help
Edited by: KVC on Nov 9, 2011 1:38 PM
Edited by: KVC on Nov 9, 2011 4:29 PM

Smart View not working in Hyperion 9.3.3 (Getting Host/Port Error (500))

When i m trying to connect smart view , i Get the following Error Message . Cannot Connect to the Provider . Make sure its running in the specified host/port . Error (500) . I have tried the following at my end . Restarted the IIS and Web Servcies . I need to resolve the issue as soon as possible . Kindly Help .

Hi this is the Detailed error Message I got when I try to run hfmofficeprivder.aspx
Exception Details: System.Web.HttpException: The current identity (NT AUTHORITY\NETWORK SERVICE) does not have write access to 'C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[HttpException (0x80004005): The current identity (NT AUTHORITY\NETWORK SERVICE) does not have write access to 'C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files'.]
System.Web.HttpRuntime.SetUpCodegenDirectory(CompilationSection compilationSection) +3474107
System.Web.HttpRuntime.HostingInit(HostingEnvironmentFlags hostingFlags) +226
[HttpException (0x80004005): The current identity (NT AUTHORITY\NETWORK SERVICE) does not have write access to 'C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files'.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +3426839
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +88
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +149
Regards,
David
Edited by: David Mallela on May 24, 2012 8:04 PM

Smart View in Chinese

Hi all,
Currently I'm using Microsoft Office 2007 and want to install smart view in Chinese language.
When I try to install and choose the language to be Chinese, after installation, my smart view is in English and not Chinese.
I had try go to menu Advanced --> Language, but only got 2 language. Default and English. Whatever language did I choose, it still in English version
Anyone know how to install smart view in Chinese edition?
FYI, I installed English version for a few months already and want to change language to Chinese
Thanks

Hi,
Click the Start orb and in the search type regional. You will see Change the date, time or number format. Open it and click the Administrative tab. Next click Change System Locale to Chinese.
HTH-
Jasmine.

Smart View Shared Connections - Oracle Essbase - How is list derived?

Testing out the new build of Smart view 11.1.2.2.310 on Office Excel 2010. In Shared connections I show three Essbase servers
EssbaseCluster-1
EssbaseCluster-2
EssbaseCluster-3
Via EAS there is only EssbaseCluster-3. What file or lookup is Shared Connections pointing to for 1 and 2? If I try to open them they give a 'cannot connect to Essbase server' error.
How can I remove these? Right-click delete option not available...
JTS

It is usually being picked up from the Shared Services Registry, if you run a registry report do you have 3 clusters?
Cheers
John
http://john-goodwin.blogspot.com/

How to connect Smart Views against BIC2G OBIEE+ Analysis services

Similar Messages

Maybe you are looking for