How to connect sony bravia tv wirelessly to internet using apple airport

Hi. I cannot connect my Sony Bravia smart TV wirelessly to internet via my Apple Airport Extreme wireless setup. The TV status is network connection OK, but fails to connect to internet. Apple Laptop connects OK via wireless Can anyone help please.

Hello chowpotluri, thank you for your message. Welcome to SONY Community!
Follow these steps to access the YUPPTV app from the Internet Video menu:
1. Using the supplied remote, press the Home button.
2. Select Internet Video.
NOTE: If the Internet Video option is missing, Select Refresh Internet Content from the Network section of the menu and repeat step one.
3. Select YuppTV.
NOTE: YuppTV requires a device registration. Follow the steps on the screen to register the account. Visit the YuppTVwebsite for account information and answers to usage questions.
Hopefully this post helps you. 
 

Similar Messages

  • How to connect a Sony Bravia TV to the internet through your Airport network

    Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
    My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
    Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
    The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

    I have now had a detailed reply from Sony Europe and the way to do this is to:
    1.       Press Home on the TV Setup
    2.       Use the right and left arrow to select Setting.
    3.       Use the up and down to select Network, press Enter.
    4.       Select Network Setup.
    5.       Select Wireless setup.
    6.       Select Scan
    7.       Select your network
    8.       A new screen will appear asking for entering the security key.
    9.       Enter your WPA2 key.
    10.   Select Enter.
    11.   It will take you back to the same screen asking for entering the
    security key.
    12.   Press the right arrow.
    13.   Select Auto.
    14.   Press the right arrow.
    15.   Select Save and connect.
    These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

  • Connecting hp 4620 to wireless network with an apple airport express and apple OS X 10.5

    Any help would be greatly.  This setup used to print wirelessly just fine until we switched internet providers and now the printer will not connect via the airport express router.  I've tried going into the airport utility, manual set-up, base station.....but there is no "add wireless clients" to choose like all the online help that I've read says should be there.  Thx in advance, Matt
    This question was solved.
    View Solution.

    Hi Matt,
    Temporarly connect the printer to your mac with a USB cable.
    Go to Applicatons > Hewlett-Packard > Device Utilities and follow the HP Setup Assistant.
    Select wireless connection during the setup, you will be prompted to provide your wireless network details to reconfgure the printer on your new network.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705. E

    I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705.
    Everytime I restart the computer now I get a open with window.
    When I select Notepad and open it I get
    0x54c  Noswal\.android\adb_usb.******
    How do i undo that.
    If it helps the Article ID:474705 this says at one point
    3. Open a shell prompt and enter the following command: echo "0x54c" >> $HOME/.android/adb_usb.******.
    I gues that's what's creating the problem.
    Please help.

    Hi elishacuthbert.
    Try disabling the start-up items in your computer to troubleshoot the issue. Follow the steps mentioned below:
    Right click on the Taskbar > Task Manager > Start-up > Select the applications > Disable.
    Note: If my post answers your question, please mark it as an "Accepted Solution."

  • How to connect sony gv-d1000 to FCPX?

    how to connect sony gv-d1000 to FCPX?

    BenB wrote:
    FCP X only recognizes Firewire decks and cameras.  You'll need some sort of converter to go FW.  Look in to Blackmagic, AJA, Matrox, stuff like that.  I don't know any specific devices off hand.
    That deck is an iLink enabled mini DV player.
    It should work with the appropriate firewire cable.
    Al

  • How to connect my Nokia c2-00 bluetooth Internet in iPad 2

    How to connect my Nokia c2-00 bluetooth Internet in iPad 2

    Just want do you want to do? You can only use BT on an iOS device to share an internet connection on an iPhone and iPad 3 (I think)
    iOS: Understanding Personal Hotspot

  • How to connect my iPad and iPhone to my new apple tv ?

    how to connect my iPad and iPhone to my new apple tv ?

    Also, make sure that all devices are on the same Wi-Fi network (e.g. not on a "guest" connection), and verify the ATV settings to see that AirPlay (and HomeSharing while you're at it) are turned on.

  • How do you set up a password for a wireless network when using an Airport Extreme?

    How do you set up a password for a wireless network when using an Airport Extreme wireless router?

    Thanks for the updated information.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme icon, then click Manual Setup
    Click the Wireless tab below the row of icons
    Check to make sure that the setting for Wireless Security reads either WPA2 Personal or WPA/WPA2 Personal
    Enter a Wireless Password and Verify Password
    Click Update to save any changes and wait a full minute for the AirPort Etreme to restart

  • I am using SURPLUSMETER :) I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card ,

    I am using SURPLUSMETER I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card , & Adaptor .
    Which one can I use properly to monitor all the wireless Devices in my hous

    Actually, none of the options will do what you are looking for it to do. That is because, this application only monitors the traffic from the device it is hosted on. That would also mean that you would have to run a copy on each computer that will access the Internet on your network; note their individual usages, and then, combine them to get an idea of the total usage.
    However, if you are only interested in the amount of Wi-Fi traffic that only your computer is seeing, then the "AirPort Network Card" option would be the correct choice.

  • How to connect my iPad to wireless dest 3511e all in one HP printer

    How to connect my wireless printer to my iPad HP dest jet 3511e all in one SN [Personal Information Removed]

    Hi Alicerief,
    Welcome to the HP Support Forums. I understand that you would like to know how to print from your iPad to your Deskjet 3511 printer.
    Your printer is AirPrint and ePrint capable so you should be able to use either method to print once your printer is connected to your wireless network. The instructions on connecting your printer to your wireless network can be found in your user guide. You can designate it as a wireless printer during the setup as detailed in the section "Traditional wireless connection" on page 32.  If you have already installed your printer onto your computer using a USB connection, the instructions to switch to a wireless connection can also be found on page 32 in the section titled "Change from a USB connection to a wireless network". 
    I have included several reference documents for you. The first one reviews printing from an Apple mobile device to your printer. I have also included the document on how to setup ePrint and customize the printer's ePrint email address. There are two mobile apps available from HP that will allow you to send print jobs to your printer, the HP ePrint mobile app and the HP All-in-One Printer Remote app. The AiO app will also allow you to scan from your printer to your iPad. I have included the FAQ documents for both apps.
    HP Deskjet 3510 e-All-in-One Series User Guide
    http://h10032.www1.hp.com/ctg/Manual/c03471705.pdf
    Printing from an Apple Mobile Device
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02796271
    Setting Up a Custom Email Address for ePrint
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02940150
    HP ePrint Mobile App FAQs
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01923321
    HP All-in-One Printer Remote Mobile App FAQs
    https://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03561640
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How to connect Photosmart C4795 to Wireless Network - Mac OSX 10.8.4

    I am desperately confused here!  When I bought the printer 2-ish years ago I was able to set it up and have it connected to my network no problem.  Since then I have moved and updated my OS to Mountain Lion and lost my installation CD.  As of now, this is where things stand.
    When I turned the printer on and connected it to my iMac via the USB cable, the computer found it and installed it with no issues.  I can print with no issues when the USB cable is plugged in.  
    Using the printers built in display, I have run the HP Network Configuration and the Wireless Network Test.  The printer can see my network, but it won't connect to it.  I have no bloody idea where I need to go to enter my network password so the printer can get online.  
    I've manually downloaded the HP Driver found at http://support.apple.com/kb/DL907  and that put the HP Utility on my computer (which was already there) but I don't see any place in the utility software that would let me enter my network password or even configure network settings for the printer. 
    My router is an Apple Airport Extreme, and the firmware is up to date.  Everything on my computer seems to be up to date.  I just cannot for the life of me figure out how to get this thing online.  Any help would be greatly appreciated =)

    Yup, there is no way to install your printer using OS X 10.8, sorry.
    However, there are alternatives.  Here is the easiest way:
    1. On the front of the printer: Setup [Scan] > Wireless > Restore Defaults.
    2. In the same Wireless menu, start WPS Pushbutton.
    3. On your Mac go to Applications > Utilities > Airport Utility.  Choose your Airport and click Edit.
    4. In the menu bar at the top of your screen go to Base Station > Add WPS Printer.
    5. Choose the FIrst Attempt mode, then Continue.
    Now your printer should be connected to your wireless network.  Next, go to System Prefs > Print & Scan, click the '+' sign to add your printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Connecting sony bravia to home network

    Has anyone connected a Sony Bravia TV to their home network so that they can access home photo files, itunes?

    Can you please try to put a dollar sign before the password? That works most of the time.

  • How to connect via bluetooth with wireless printer

    how to connect my macbook pro via bluetooth with epson all in one wireless TX600FW

    Bluetooth between iOS devices and computers is only for Internet tethering, nothing else.
    See: http://support.apple.com/kb/ht3647

  • How to connect Slingbox to AEBS wirelessly?

    I recently switched from a Netgear wireless router to the AEBS. We have a mixed network with both PC's and Mac's. The only issue I currently have with the AE is that I can't use the Slingbox. The Slingbox is not in the same room with the AE - I had connected to the old Netgear router with a Netgear wireless game adapter. The AEBS does not recognize the Netgear WGE111. The internet light just blinks. Netgear talked to Netgear but it isn't talking to Apple.
    I am using WPA. I am on Leopard.
    I have changed the AEBS to use the 192 range of IP's that Netgear likes. No joy.
    I've seen discussions here about connecting the Slingbox but not with a wireless adapter. If someone knows of a wireless adapter that the AE will let in the network, I'd like to know. The Netgear comes with configuration software, but unless I can connect to it, it's not very useful.
    Thanks for any suggestions.

    ... but the Netgear website implies it can be done with WPA.
    Here's the manufacturer's reference, I found, that says it doesn't: 54 MBPS WIRELESS GAME ADAPTER
    Did you find a different reference?

  • How to Connect Wii and Xbox360 wirelessly with SBC Home Portal

    Greetings. Need help on hardware to connect Wii and Xbox360 wirelessly to SBC Home portal modem.  Distance between connect points are about 50 feet plus and separated by floors and walls.  What would work to acheive the connection?  Thanks in advance for the help.
    Sparrky

    Configure the X-BOX & WII using the wireless connection same as in wireless router .....
    Check the connections status on both the devices & see if you are online or not ....

Maybe you are looking for