How to connect Sony HDR Cx100E on imovie using USB

Hi, I am not able to connect my SONY HDR Cx100E on imovie using USB, at the same time I can connect the same to aperture and iphoto. Can any one help me please?
if you can give me the step by step info will be a great help for me.
thanks in advance

Can't connect the camera directly to that monitor. It only has the ADC connection. What you'd have to do is capture the footage and use the Digital Cinema Desktop to view the footage.
Can't you monitor what you have on the cameras LCD, or the Capture window?
Shane
"There's no need to fear, UNDERDOG is here!"

Similar Messages

I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705. E

I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705.
Everytime I restart the computer now I get a open with window.
When I select Notepad and open it I get
0x54c Noswal\.android\adb_usb.******
How do i undo that.
If it helps the Article ID:474705 this says at one point
3. Open a shell prompt and enter the following command: echo "0x54c" >> $HOME/.android/adb_usb.******.
I gues that's what's creating the problem.
Please help.

Hi elishacuthbert.
Try disabling the start-up items in your computer to troubleshoot the issue. Follow the steps mentioned below:
Right click on the Taskbar > Task Manager > Start-up > Select the applications > Disable.
Note: If my post answers your question, please mark it as an "Accepted Solution."

Canon HV10 or Sony HDR-HC3 for iMovie HD 6

In case you're interested…
I'm in the process of reviewing both the Canon HV10 and the Sony HDR-HC3. Both use Mini DV tapes. I've heard hard disk models don't work with iMovie HD6.
I've tried both on my Intel iMac at 2.16 Gz and this is what happened…
Sony HC3
I used Firewire cable (must be Firewire - Sony calls it iLink) and plugged in the cam with iMovie already opened. Clicked to the camera icon and… Nothing happened. There was no recognition of the camcorder at all. Zilch. I fiddled, checked the camcorder's audio was set to 16bit and changed several prefences in iMovie but still nothing. I had previously set the cam's time too. I've since learned the HC3 and many other Sony's are incompatible with iMovie HD. It's a lovely camcorder but unless you download some extra software – as mentioned in the forums – it ain't gonna work.
Canon HV10
Performed the same Firewire connections and, lo, the camcorder was detected and I was able to begin importing HD visuals. But then… On immediate playback after importing I noticed the audio was running at half speed – subtley – the visuals too. I spent hours shooting short bits, importing them with other settings, and every time voices came out low and slurred. My wife sounded like a bloke. I posted the problem here and someone told me the HD takes a long time to render. So bear that in mind. And don't be impatient like me.
In this instance, the Canon wins.
Apple iMac 2.16 Mac OS X (10.4.8)
Apple iMac 2.16 Mac OS X (10.4.8)
Apple iMac 2.16 Mac OS X (10.4.8)
Apple iMac 2.16 Mac OS X (10.4.8)

I'm really confused now. I've set the HC3's settings to HDV (not Auto) and the iLink Conv to OFF. And still no joy. I've even tried 'Magic Movie' for which it searched for a camera but found nothing. I know the Firewire cable works because I've used it on the Canon and my own, older Digital-8 Sony Handycam.

How to connect sony gv-d1000 to FCPX?

how to connect sony gv-d1000 to FCPX?

BenB wrote:
FCP X only recognizes Firewire decks and cameras. You'll need some sort of converter to go FW. Look in to Blackmagic, AJA, Matrox, stuff like that. I don't know any specific devices off hand.
That deck is an iLink enabled mini DV player.
It should work with the appropriate firewire cable.
Al

How to connect sybase database in JDeveloper 11g using JConnect

Hi
How to connect sybase database in JDeveloper 11g using JConnect? Please help.

User,
It would help if you explained Sybase Jconnect instead of leaving us to google.
At any rate, it appears you need to create a library definition in JDeveloper, add the appropriate JConnect JAR files to the library's classpath, and then add the library to your project.
John

HT204387 Hello! Can anyone teach me how to connect iphone 4S to ipad retina using bluetooth. I tried, but the devices won't discover each other at all. I just wanted to connect to share contact details so I don't have to key in one by one. Many thanks

Hello!
Can anyone teach me how to connect iphone 4S to ipad retina using bluetooth. I tried, but the devices won't discover each other at all. I just wanted to connect to share contact details so I don't have to key in one by one.
Many thanks
Injin

You need to go to the App stores and find compatible apps. iOS device do not natively have to ability to transfer info to a computer via BT to a computer.
With iOS 8 you can use AirDrop

How to connect iphone 5 with ipad 2 using Bluetooth? When I activate Bluetooth both devices search but not listing each other to pair or connect.

How to connect iphone 5 with ipad 2 using Bluetooth? When I activate Bluetooth both devices search but not listing each other to pair or connect.

You can use Photo Transfer App to transfer photos from iPhone to iPad or vice versa using Bluetooth or WiFi
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3dd129795daebebc4b8 741b057f5f70d.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3af5c541040e15e3f6b 3356e4c55cbfc.jpg

Does anyone know how to connect there computer to the enternet using iphone

I was wanting to know how to connect my computer to the internet using my iphone.

You can't, not supported

Everytime when i connect 3g internet with my laptop using USB (Windows 7) it creats new connection trailing network1, network2, network3.........

Everytime when i connect 3g internet with my laptop using USB (Windows 7) it creats new connection trailing network1, network2, network3.........
It does not recognise my old connection.
Same case with wifi connection as well.
Also after updating new IOS-5, whenever i make USB connection it does not display my name under my computer.
But before it use to display my name now it is coming as Apple I-phone.
Anyone who can help on this, how to get it resolved.
- I have update my phone with backup (OLD version of IOS) but issue still presists.
This is the same issue somone mention on below.
http://www.sevenforums.com/network-sharing/193123-iphone-network-location-doesnt -save-when-disconnected.html
Kind Regards
@ru..

If the message that is displaying is "Network connection timed out", disable any Anti-Virus or Firewall software on the comptuer or check with the company that supports the product on how to modify it to allow iTunes to connect to the Internet.

Issues in Connecting Moto G to Flex 14 using USB

Hello:
I have Ideapad Flex 14 on which I have installed 64 bit Microsoft Windows 8.1. When I connect my Moto G (1st Gen) using USB port, it gets connected to the laptop, when I go to the specific folder of this Moto G using Windows Explorer, the whole folder structure including the Explorer window disappears. Then in couple of seconds, it appears again. This continues foreever till the time phone is disconnected from the laptop USB cord. I downloaded the Moto G driver from their website for Windows 8.1 and installed it. Still I am facing this issue.
To check it, I connected Sony Experia using USB and it is facing same issues.
Could you please guide me in resolving this issue?
Thanking you
CSJ

hello i face problem to connect my smart phone moto g to laptop.

How to recover administrator password in windows 7 using usb

I have an HP netbook mini and need to how to recover administrator password in windows 7 using usb as we have forgotten and need to load itunes from another Iphone.
This question was solved.
View Solution.

Hi,
You could use a reset utility such as the free example on the link below - using another PC, this can be created on a usb flash drive.
http://pogostick.net/~pnh/ntpasswd/
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Connecting Agilent DSO3062A Oscilloscope with LabVIEW using USB

I am trying to connect Agilent DSO3062A Oscilloscope with LabVIEW using USB but the device is not recognized by MAX. I have installed the drivers for scope and it works fine with the scope software. The problem is LabVIEW dosen't recognize the scope. Please tell me the procedure of setting up the scope with LabVIEW 8.2. I am using Windows XP.

Hi there,
I think the issue is that the DSO3062A will not be recognized by LabView as a GPIB instrument through the USB connection. If you check out the 3000 series manual (http://cp.literature.agilent.com/litweb/pdf/D3000-97016.pdf) you'll notice on page 8 it says you can't use the USB for programming, it can only be used with their scope software. You need the N2861 module installed on the back to connect via GPIB, and then a GPIB interface to your computer. I hope that helps.
-jmart

SONY HDR UX3E - dvd camcorder with usb connection

does anyone know how to get video out of those new DVD video cameras ?
First, do those new, mini 8cm dvds go into a PowerBook G4 SuperDrive slot?
This camera has a usb cord, so i'm plugging that into PowerBook G4 usb port. The volume shows up on my desktop, but clicking on it just brings up various files that I can't see thumbnails of or open with imovie, dvd, or quicktime.
my previous camcorder used a firewire connectionl. Does anyone have experience with the new SONY HDR UX3E camera and a mac? it is High defintion.
is there a way to hook camera up with Firewire? my manual doesn't mention it. does anyone have this camera, and use it with a powerBookG4??
ay help would be appreciated

WARNING!!!! Never pop in any thing other than a standard size CD/DVD in your slot-loading Macs!
You will damage your optical drive severely. You can only put those things in a tray-loading optical drive.
Second, the only connection supported by Macs are FireWire connections for digital video cameras. (Unless something has changed recently, which I don't believe since I am a video editor--not professional--myself in my job).
The best cameras for Macs are the DV cameras. If you want HD, you can record to mini-DV. The hard drive cameras work too, but it takes multiple steps before you can start editing your video.
I'm not sure how to extract the video from your DVDs since they are encoded, but I will look for you. (Unless someone answers before I do).
Check your camera to see if it does have a FireWire connection. Some cameras have both, though Sony tends to use USB 2.0. Theirs would be called "iLink" for the FireWire port.
Message was edited by: Pismo 900
**your DVDs have your videos encoded in MPEG-2 format so you need an application that will convert that into .DV or .MOV formats so that you can edit in iMovie or Final Cut. (Or QuickTime). There are many third-party apps for Mac OS X that can do that for you.

Sony HDR-HC1 with iMovie HD 6 experience

Well, I took the plunge and picked up a Sony HDR-HC1
HD camcorder. I took it for its first drive. The video
is awesome but iMovie HD 6 has some quirks.
I imported the video into the computer. It imports
at 1/2 real time. I learned later that this is a
function of my computer speed. The camera was actually
playing at normal speed; the computer was processing
at 1/2 that rate.
When I attempted to play the movie, iMovie hung on
me. In hindsight, it appears that there was some
corrupted data at the very beginning of the tape.
I waited and waited while my CPU was pegged at 100%
not knowing if this was normal processing or what.
I had to kill the application to get out of this hang.
It took a number of hangs/kills before I got out of
this loop.
In iMovie, the colors came and went. Sometimes the
color was perfect; other times it was a tint of
psychedelic purple/green. I don't know what the
heck was going on. It seems good now after I
created a new project.
The 16:9 movie was being displayed as 4:3.
Everything looked narrow. I created a new project
and this problem went away.
When I tried to use an external Firewire drive for
the project, it said "no camera connected."
Apparently, you can't connect to the camera
(with Firewire) when a Firewire drive is in use.
This is something else I learned the hard way.

"..When I tried to use an external Firewire drive for the project, it said "no camera connected.."
This may depend on (a) the make and model of external drive, (b) which socket on the drive you connect the camera to ..assuming there are at least two FireWire sockets on the drive.
You might also try using a FireWire hub (..some work, and some don't, but the Belkin and Dino hubs work for me and my G4 PowerBook..) to connect both devices to your Mac.
Here's another surprise waiting for you, if you haven't yet tried doing it (..we-ell; it's no longer a surprise, as I'm describing it here!..) ..when you come to export HDV back to the camera, you may find that it takes far longer than importing. The last-but-one issue of the UK's "MacUser" magazine suggests that it may take 10x real time to export HDV back to the camcorder. I sent 24 seconds' worth back to the camera yesterday, and that took about 8 minutes; seven or eight seconds for every 12 frames.
iMovie has to re-encode into MPEG-2 HDV from the DV/QuickTime footage within iMovie, and that can take a -l-o-n-g- time before it switches the camera to 'Record' and actually starts sending video down the FireWire cable into the HC1.
..I just thought you ought to know, and be prepared for the wait!

Cannot Connect Sony HDR-FX1E

Hi,
I cannot connect my Sony HDR-FX1E to my Mac through firewire to Final Cut Pro 6 or iMovie, it just will not connect, through easy set up or any other way in Final Cut. Are there drivers that I need or is this a Leopard problem?
I've tried fiddling with settings on the camera as well, but I have been using it on my work systems (not leopard) and its been fine.
Any help would be great as i'm desperate to capture some footage that needs editing.
Thanks,
Ryan

resolved this myself by getting a new firewire cable, cheers to me for the advice!

How to connect Sony HDR Cx100E on imovie using USB

Similar Messages

Maybe you are looking for