How to connect stereo jacks 1/4 to my macbook?

Hi,
I want to record my electronic drumset on my macbook (logic), but the output on my module is two 1/4 jacks (stereo) :/ Is there a cheap firewire converter that will do the job?

You could just buy a two 1/4 jack to one stereo minijack cable and use the built in Audio of the laptop. 10-20 €.
The cheapest stereo 24 bits interface I can think of is the Edirol UA1EX (69 €). The cheapest FW is more expensive: the Behringer FCA 202 (99 €).
regards, Erik.

Similar Messages

  • How to connect my guitar into my new 13'' macbook pro using headphone's port?

    how to connect my guitar into my new 13'' macbook pro using headphone's port?

    you need a standard guitar cable and a 1/4 inch to 1/8 inch adapter such as this http://www.amazon.com/Recoton-CW1521-4-Inch-8-Inch-Adapter/dp/B00006HOIW

  • How to connect an Arduino Ethernet Shield on my MacBook?

    I have a plan that is to create an alarm with an Arduino.
    I have an Arduino Uno and Arduino Ethernet shield. I want to communicate with my arduino by ethernet connection to my MacBook Pro Yosemite (not a router).
    I use with the Arduino IDE the basic program (WebServer) but it does not show what it should show. I should get an HTML page as the first image in step 2 of this site: http://www.instructables.com/id/ServDuino-Arduino-Webserver/?ALLSTEPS but that prints "It works!".
    I don't understand. I configured Ethernet by putting the same IP address as the one I put in the program.

    Hi msmitheyowen,
    Welcome to the Support Communities!
    This article will explain how to change your Messages settings:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Cheers,
    - Judy

  • How to connect 2 or 3 externadisplays to the macbook pro 15" (mid 2010, i7)

    I have a new MacbookPro (mid 2010, i7) I have 2 HP monitors (20") and a big TV (50") I am setting up a classroom. I want to display 1 screen on the TV (which is behind me) mirroring a secondary screen I have in front of me, and also have another secondary screen in front of me.
    So far I tried connecting only 1 HP monitor and the TV connected to an HDMI splitter (after the minidisplay to HDMI adaptor) using an HDMI splitter, and I only get the image on the HP monitor, the TV is black.
    I have been reading about the USB to DVI boxes and they seem to work but not with the latest MacbookPro (i5 and i7).
    Anyone knows how to achieve this setup in my computer (1 HP (DVI) mirrored on a TV (HDMI) and an extra HP monitor (DVI))?
    Thanks

    You will need to talk to the tech support people at Matrox about whether or not you could do what you hope to do with a TripleHead2Go DP Edition. I suspect you would be limited to an undesirably low resolution (1360 x 768 or lower) on all three external displays. I don't know of any other possibility for such a setup, other than running it off a desktop computer with multiple graphics cards.
    http://www.matrox.com/graphics/en/support/gxm/

  • How to connect a micro DVI display to a macbook

    I want to connect a new 27" apple display to my macbook from 2008.
    I can not find a mini DVI to micro DVI or thunderbold adapter. Does this exist or do I need to vonvert from mini DVI to HDMI and the to micro DVI ?
    Thanks in advance.

    The FireWire cable is just for the FireWire ports on the display.  The display will run without it.

  • Can someone indicate step by step how to connect my external hard drive to my Macbook Air as additional storage and memory?

    I have a WD My Passport for Mac. I have it into two partitions one formatted into Mac OS Extended (Journaled) and the other one formatted into exFat. I don't really know where to go from there. I would love it if somebody could help me with a step by step process.

    Have you connected the WD external HDD to your MBA with the USB cable?  It should be displayed on your desktop.  If not, check the settings in Finder Preferences.
    Once it is connected, click on the icon and a window will open showing what ever data you have on it.  The same procedures apply as with the internal storage of the MBA.
    Some WD HDDs come with their own software which may create unnecessary problems with your OSX.  You may have to get rid of that.
    Ciao.

  • How to connect my firewire device to my retina macbook?

    I bought a new MacBook Pro Retina display, with the SSD.  Awersome, but now I regret getting the smaller 500 GB drive, as it is now full.  I will move all my photos and video to my spare LaCie external drives, but they are only firewire I/O.  As far as I know, my MacBook does not have a firewire port.  Is there an adapter, like the one for ethernet-to-Thunderbolt, that I can get so I can still use my external drives?

    Thank you Niel.  I had taken a browse at the Apple site but I guess I missed this little gem.  I'll head to my local Apple store over lunch.
    Kind regards,
    Mike

  • How to connect multiple Apple LED Cinema Displays to MacBook Pro

    I have an Apple 24 inch LED Cinema display that I run from my MB Pro. I mainly use the MB Pro+ screen for document editing.
    I would like to run a second Apple 24 inch Cinema display from the MB Pro. I am presently running another monitor successfully via a Dynalink USB splitter but would really prefer to run a second Apple monitor. I have enquired at two Apple Stores and browsed lots of sites. Multiple monitors from MB Pro seems ok (as long as it's not two Apple monitors). I would be surprised if Apple is content to pass up the opportunity to sell more of these superb screens.
    Grateful for any advice and suggestions

    In addition to the one from Atlona, there are:
    <http://www.gefen.com/gefentv/gtvproduct.jsp?prod_id=9898>
    <http://www.kanexlive.com/c247dl>

  • How to connect my mobile with GPRS to Macbook?

    How to connect my samsung mobile with GPRS to MacBook?

    Hope this helps..
    http://www.theinternetpatrol.com/how-to-connect-your-computer-to-the-internet-using-your-cell-phone-...
    --------------------------------------------------​--------------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

  • How to connect my wifi printer to my MacBook Pro

    Hello - Could you please advise re: how to connect my HP Deskjet 3050 to my MacBook Pro?  I gather I have to connect the printer to my Wifi network first, but the instructions aren't clear for a Mac.
    Please help.  Thank you -

    Mac OS Printing/Fax (any version), OS X Lion, OS X Mountain Lionhttp://www.apple.com/support/osx/
    printing in OS X Mountain Lion
    http://support.apple.com/kb/HT4670
    Configure it directly while connected via USB first generally works.
    However here is what Canon support has.
    Direct you to the proper forum for MacBook :
    MacBook Series Forums
    https://discussions.apple.com/community/notebooks?view=discussions
    http://www.apple.com/support/macbookpro
    Mac OS X Forum
    https://discussions.apple.com/community/mac_os?view=discussions
    This forum deals with a desktop/tower 65lb Mac Pro
    http://www.apple.com/support/macpro

  • How Can I Connect 2 External Display Monitors to a MacBook Pro? Help

    I want to know if I can (and How to) connect 2 external display monitors to a MacBook Pro... late 2006 & the new Unibody MBP.
    I'll appreciate

    Requires additional hardware - the Matrox DualHead2Go. For the late 2006, you'd need the DualHead2Go Digital Edition, and for the unibody you'd need the DualHead2Go DP Edition, with appropriate cabling (and a DVI-to-VGA adapter for the late 2006 MBP).
    http://www.matrox.com/graphics/en/products/gxm/dh2go/

  • How to connect shuffle to a VW stereo??

    Got tired of looking for an adapter to connect my shuffle to my car stereo. I have a VW which comes with the 30-pin connector cable but the shuffle does not connect to that. Anyone knows how to connect??

    With the cable that shipped with the iPhone. One end of the cable is a USB connector.

  • I connected my iPod Touch to a stereo system phono input using a cable with stereo jacks (red and white) on one end and that plugs into the iPod's headphone jack.  The problem is that the sound is extremely muffled and bass-heavy, with little treble.

    I connected my iPod Touch to a stereo system phono input using a cable with stereo jacks (red and white) on one end and that plugs into the iPod's headphone jack.  The problem is that the sound is extremely muffled and bass-heavy, with little treble.  I have to turn the bass control on the stereo receiver to pratically zero in order for the sound coming through the stereo to be acceptable.  Is there a setting on either the iPod or the stereo that I need to change in order to fix this?

    The phono input is for a phonograph.  The iPod does headphne output is not that same as a phongraph output.  Does th stero have an AUX input?  That should be compatible.

  • How to connect to promiscuous jack server as root?

    I've configured jack 0.121.3 ( to run as a daemon at startup using the instructions on the wiki. My user account can connect to jack just fine, however I want to run an audio application at startup as a daemon too, which means it needs to connect to the jack server as root. I've tried adding root to the audio group and to the users group, but this didn't help.
    How can I connect to the promiscuous jack server as root?
    James

    Try the OS X Server forum.

  • How to connect the Satellite Pro P100 to Hifi

    I've got Satellite Pro P100. How to connect this notebook to HiFI
    This is probably easy, but what can i say... just call me stupid.
    I've got the lead that goes out of the headphone jack, it links up to my hifi nice.
    Trouble being, there's a nasty hiss in the background. Tried plugging my boys mp3 player into the lead, and that works fine.
    Any chance of some help... thanks

    Hi
    In my knowledge you can connect the Sat Pro P100 to HiFi only via a 2-RCA Audio Y cable adapter. In my knowledge the notebook does not support the S/PDIF audio out so you will be able only to use an analog sound port.
    You could also buy a stereo adapter with 2x cinch jacks to connect the notebook to the Hifi. Such adapter can be plugged into the headphone jack
    Check this:
    stereo adapter
    I think you should visit the nearest notebook dealer. He can show you the right and supported cables and adapters.

Maybe you are looking for

  • XML Publisher report not printing German character ü properly

    Hi We have a BI PU Report which gets the XML from the 10g report. When I run the report in Oracle Apps, the XML generated by the report has the correct name, but the pdf output doesnot show the correct name on it. Name (in XML file): *<FSE_NAME>Kühn,

  • Old FCP settings vs. new Super 8 project possibly not optimal??

    hi folks! I've got a project that I cut that originated on Super 8 film, and I'm wondering if I've got FCP on the optimal settings for exporting it to quicktime so I can make a DVD. The footage looks pretty good but the Boris titles are fairly pixela

  • Javax.mail.MessagingException: 451 Error while writing spool file??

    Hi all friends, Can any one plz tell me why Iam getting below error when Iam trying to send mail with attachment.Iam using Java Mail API. javax.mail.MessagingException: 451 Error while writing spool file Plz tell me what are the reasons behind it. Re

  • JDev 11.1.2 dropping a data control creates new DataControl Usage

    After installing JDev 11.1.2 in a new Oracle Home I've been dealing with some weird behaviors Now, each time I drag a Data Control into a page, a new Data Control Usage is created. However, View objects do not appear inside Data Control in the bindin

  • Tab Page Navigation Issue

    I've two tab page tab1 and tab2. tab2 contains three tab page tabA,tabB and tabC. In tab1 i've a commadButton. Now, if i click on this commandButton then i want to go into tabB which is inside of tab2. Please give any idea how can i navigate in tab2