How to connect sun solaris 10 on sparc to the internet?

hello all. i don't know anything about sun solaris 10.
after installing sun solaris 10 into my sparc pc, i need to register it through internet.
but i don't know how to connect to internet through LAN at my campus. =(
Please help me & give me details how to connect to internet?

Go to docs.sun.com and get the "system administration guide: IP services". This will give you info on how to configure the network card and tcp/ip config files. Since you just installed this, you must have told the install process that the system was not connected to the network, otherwise it would have asked you for name service, hostname, etc. and configured this info for you.
First you need to get info from your network/lan admin on an ip address, netmask, gateway, NIS/NIS+/DNS server, etc.
If the LAN uses DHCP, then see the "DHCP" section of the IP Services guide.
If the LAN uses issued IP addresses, then with the info provided by your network admin in hand, you can do 1.) sys-unconfig to force the system to return to the part of the install where it will ask you for the info and configure it for your -OR- take the info provided and configure the appropriate files specified in the IP Services guide.

Similar Messages

How to connect Apple TV to other users at the internet

Can anyone tell me if I can share a iTunes libary with a friend/brother who also have direct ADSL connection to the internet? We both have a Apple TV device and iTunes, and would like to share the contens with each other. I have already tried the network settings, but until now without luck! Is it possible????
Thanks in advance

Perhaps this is a step in the right direction:
http://lifehacker.com/software/vpn/
I dont have Apple TV yet but like this idea of an encrypted VPN
Macbook 2GHZ/2G Ram Mac OS X (10.4.9)

How to setup Sun Solaris 5.7 to perform routing

How to setup Sun Solaris 5.7 to perform routing and how to setup as a bridge.

Hi,
1.You will have to have two interfaces
Interface1 should be from network1
interface2 should be from network2
2.will have to create hostname.interface files for each interface
hostname.qfe0 hostname.qfe1
3.type hostname and ipAddressof each interface in /etc/inet/hosts
4.create /etc/defaultrouter file for static route
use "route" commands to create routes for the other interfaces.
Check out the docs.sun.com
Solaris 7 Administartion guide
TCP/IP Data Communication Guide
for more details
Thanks & Regards
Dhruva
Thanks & Regards
Dhruva

Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

I believe you naeed the Apple ADC to DVI adapter.

I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

This is possible to be connected to WiFi but not internet.
You connect to your modem/router via WiFi and whether it is connected to the internet or configured properly to route the internet to WiFi devices is a different story.
Now if you've already reset your WiFi (try disabling and enabling) and perhaps even restarting your MBP
Then make sure that your modem/router is connected to the internet.
You can try any other device, lights on the modem/router or use Eth cable to test.
Report back your findings.

TA25199 how to connect digital octical audio cable to my sony internet tv w/bose cinimate 1SR

how to connect digital octical audio cable to my sony internet tv w/ bose cinimate 1SR

I took the cable and connected it to my atv's optical port
then I pulled the cable and connected it to my receiver and then
it played audio

Anyone has an idea how to connect and configure my Airport express to an internet range extender which is plugged into mains

Anyone has an idea how to connect and configure my Airport express to an internet range extender which is plugged into mains?
Message was edited by: m. emin

You can connect it but with ethernet cable. You can not connect it by wifi to extend the range a second time.
BTW AE is rather sensitive to connect by wifi to non-apple wifi routers.

How can I access my home security DVR from the internet?

My Time Capsule (as a router and not a bridge) blocks me from accessing my home security DVR from the internet. I can access it from other computers connected to my LAN but not from the internet. I guess it's a firewall setting issue. I can't add the home security application to the list of firewall allowed incoming connections since it's a Windows app that I cannot install on my Mac. On the other hand, the app is installed on my old PC but I can't access the Mac firwall settings from the PC and add the security app (If that's the problem).
My DVR is connected to a Netgear switch which is connected to the Time Capsule which is connected to a Cisco modem provided by Comcast. I thought one of the modem ports had to be opened by Comcast. That was not the issue. After spending 2 hours on the phone with Comcast going in circles talking to 10 different overseas agents, they concluded the Netgear switch was blocking me from accessing the DVR. I think they are wrong and that it's a Mac firewall problem. HELP!!! Does anyone know what could be the problem and how to solve it?

Did you forward the required ports in the TIme Capsule? If not it won't work.. it has nothing to do with firewall unless the DVR is plugged into the Mac. If it is plugged into a switch you need to lock the IP of the DVR and find out what ports are required.. usually just port 80, ie html.. but it could be some others.
Since Apple do not use upnp to open ports.. the TC will have to manually be provided with the ports.. Apple use PMP-NAT that is not used by the rest of the known world.. Just to ensure you stay in the camp.

How do I set up my iMac g4 to the Internet?

How do I set up my iMac g4 to the Internet?

http://docs.info.apple.com/article.html?artnum=106748 Mac OS X: Troubleshooting a dial-up/PPP Internet connection
http://docs.info.apple.com/article.html?artnum=106749 Troubleshooting a cable modem, DSL, or LAN Internet connection

How do I copy and paste an image form the internet to Keynote. I have done this successfully in the past by selecting copy and then paste by using the right click function and now am unable to do so. I am thinking it is an outdate OS problem...not sure.

How do I copy and paste an image from the internet to Keynote. I have done so successfully in the paste by using the copy and paste right click functions but am unable to do so now. That was about a year ago that I attempted that I was able to do this. Thank you for your help.

Some images are copy-protected.
If all else fails, you can make a screen shot of the image:
With the image visible in your browser, press CMD-Shift-4 and your cursor will change to crosshairs.
Position the cross hairs at one of the corners of what you want to copy and drag to the opposite corner, then release the mouse. An copy of the image will be saved to your desktop.
You can now edit and use this image.
Be sure to respect copyrights.
Message was edited by: bwfromspring hill

How do you view a friend's screen over the internet

how do you view a friend's screen over the internet, not on the same LAN?
for 10.8.x and 10.9.x?
thanks,
g.

Look at LogMeIn, GoToMyPC or any other 'remote access service'.
LogMeIn
GoToMyPC
Apple has 'Back to my Mac' which could work well, however it is tied into iCloud & frankly makes it a real pain handling passwords to set it up.
I think the Messages application can allow you to request that someone can control the Mac via 'screen sharing' too, but I haven't tried across different OS X versions.

How do i get a movie to play on the internet on my tablet

How do I get a movie to play in the internet on my tablet

http://web.mac.com/kcarter10/iWeb/Site/Movie_files/Podcast-1.mov
Works just fine for me (Safari 3.1 and 10.5.2).
If you're using Safari you may need to use the keyboard shortcut Command-R to "refresh" the download.

I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.

I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.

Vista connects to Time Capsule but not to the internet.

Hi. Please help, I am pulling my hair out. I have just bought a Time Capsule to use as a base station to connect my laptops, PS3, iPhone etc to the internet. When I set up my Time Capsule, I got my Macbook Pro, my PS3 and my iPhone connected in about 15 minutes flat. But I have now been trying to get my wife's Sony Vaio laptop (about one year old) connected for about 3 hours. It can see the network no problem, it connects, but it only ever connects locally and will not let the Windows machine connect to the internet. When I select which network to join, it correctly identifies my network with the correct name, but once it is connected it only sees an "unidentified network".
I have looked through the forums and made sure that the NETbios is started and the security encryption matches.
If I go to the "Summery" page in my Airport Utility on my Macbook, it can see the Windows laptop.
The more I try the more I want to throw the windows machine out of the window and get my wife a mac, but she informs me that she is 28 and she is a PC! Therefore, I need to fix this...............please help.

From the Vaio's Windows Desktop, start a Command Window session. (ref: Start > Start Search > enter cmd, and then, press Enter). At the command prompt, type-in ipconfig /all, and then, press Enter.
You may have several network components listed. For example, entries for both the Ethernet and Wireless connections. We want to concentrate on the wireless adapter settings.
Note the values of the following:
o IPv4 Address - This should be an IP address in the same range as that being provided to the other network clients. By default, the AirPort uses the 10.0.1.n range ... so an address like 10.0.1.10 would be appropriate.
o DHCP Enabled - This should be "Yes."
o Default Gateway - This should be the IP address of the LAN-side of your AirPort. By default, it would be 10.0.1.1.
o DHCP Server - This should be the same as the Default Gateway value.
o DNS Servers - These should be your ISP's DNS servers IP addresses.
Again, compare these values with the other computers that are successfully access the Internet. Except for the IPv4 value, all others should be the same.

So I've changed my hard drive for an ssd and now I've been told to enable trim now I've got the apple cover will they show me how to enable it with out some program of the internet ?

so I've changed my hard drive for an ssd and now I've been told to enable trim ? now I've got the apple cover will they show me how to enable it with out some program of the internet ?

Use an app called chameleon ssd optimizer.
I enabled trim with it after almost a year of having installed a Samsung 840 pro SSD and my read/write speeds almost quadrupled.
I would definite;y advise using it even though Samsung SSD's come with there own garbage disposal.
Hope that helps.

How to connect sun solaris 10 on sparc to the internet?

Similar Messages

Maybe you are looking for