How to connect the Airport Extreme to Windows 2003 network?

Hi there,
I recently bought an Airport Extreme. I plugged the wired cable to the Airport that previously was in my MacBookPro and gave me access to our Windows network.
What do you need to do in order to access the Windows 2003 network from the Airport Extreme?
Thank you very much in advance your help!
Wildeagle

Thanks Tesserax!
for your support..
I changed it the way you told me..
it is very simple... and sounds very logic..
But after I did changed it in the correct IP address of the server
and I changed the IP address of the Internet Router (this was a must concerning the AP utility)
1> the internet was slown down..
2> the server was not reconisable by the iMac.. he gives the server a PC status ?!?!
3> the connection was poor and was not found in the AP network
very strange so I changed it to the old version
is there really no option?
perhaps with the DHCP? or with the Internet router?
FYI
I have:
1: Internet/ connected with a HUAWEI router, recieved from my internet provider
2: connect the Huawei router with the AP Extreme Router
3: connect the AP Extreme router with the Server NAS
4: AP Extreme router is the basis.. and from there I do have an Apple Airport Network

Similar Messages

  • How to setup the airport extreme for window xp

    How to setup the airport extreme for window xp

    Sorry, I forgot to mention a few points:
    1) I don't have the Airport Extreme base station;
    2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
    3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
    So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

  • How do I connect my airport extreme to windows 8.1

    how do I connect my airport extreme to windows 8.1

    Connect an Ethernet cable between the U-verse router's LAN port to the WAN (circle-of-dots) port on the AirPort Extreme Base Station (AEBS). Since you will have two routers in series, you will want to reconfigure the AEBS as a bridge. (ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode))

  • How fast IS the AirPort Extreme?

    I'm in need of a new router/modem to go along with my new ISP and new computer. (the computer is a windows) but i have 3 iMacs and 2 Windows.
    I just have a couple of questions.
    1. How fast Is the AirPort Extreme? Does it boost the speeds of the speeds you already get from the ISP?
    2. Is it a router and modem all in one?
    3. How compatible is it with windows? (can I set it up on a windows computer?)
    4. Is it REALLY worth the cost?
    5. What other router/modem combo can compare to it?

    1. How fast Is the AirPort Extreme?
    The Ethernet ports are 10/100 (100 Mbps max). The wireless interface is 802.11g (54 Mbps max).
    Does it boost the speeds of the speeds you already get from the ISP?
    No, the Internet access speed is limited by the connection speed to your ISP.
    2. Is it a router and modem all in one?
    It IS a router. It has a built-in 56k modem but it does not have a DSL or cable modem built-in.
    3. How compatible is it with windows? (can I set it up on a windows computer?)
    Ethernet and 802.11g are both standards. There is a Windows version of the AirPort Admin Utility which can be used from Windows to configure the AirPort Extreme base station (AEBS).
    5. What other router/modem combo can compare to it?
    Verify few other wireless routers have built-in USB printer support. Of those few devices even fewer are compatible with the Mac.

  • How to setup the Airport Extreme for PSP?

    Can anyone tell me how to setup the Airport Extreme for PSP? I have been searching the Discussions but none of the posting seems to explain detail enough. A step by step guide would be very appreciated. Thanks.
    PowerBook G4   Mac OS X (10.4.3)  

    Sorry, I forgot to mention a few points:
    1) I don't have the Airport Extreme base station;
    2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
    3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
    So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

  • How to configure the airport extreme as wireless bridge?

    how can i configiure the airport to function as a wireless bridge?
    i have connected my airport now with a wire to the modem/router delivered by the local internetprovider (THomson DWG850).
    Since this device has not much reach I want to connect the airport extreme wireless and position in the living room to have better reach?
    or do i need toc hang the settings in the Thomson? does anyone know where to find the admin password of the Thomson?
    thanks in advance
    Eric

    how can i configiure the airport to function as a wireless bridge?
    Sorry, but it is not possible to configure the AirPort Extreme for this type of setup. You will need to connect the AirPort Extreme to the Thomson router using an Ethernet connection.
    does anyone know where to find the admin password of the Thomson?
    Google turned this up in 5 seconds. There may be others if you look.
    Thomson default passwords

  • Do I need to connect the AirPort Extreme with a ethnet cable

    Do I need to connect the AirPort Extreme with a ethnet cable

    Hi Tracy,
    I have an airport express connected by ethernet cable to a Netgear modem which is connected to a phone socket. Those devices stay at one end of the house. I can use my MacBook Pro to connect to the internet (by Wi-Fi, no cables) anywhere else in the house.  I hope this helps.
    Ian.

  • How to rollback the Airport Extreme to previous release?

    Hello,
    I need to know how to rollback the Airport Extreme to previous release.
    I just updated my last generation Airport Extreme to the latest release because it was blinking orange the status light and it requested to be updated.  Howver, doing so, it no longer recognize my AirPort Express nor my second Airport Extreme (2nd generation) that is bridged.
    If anyone knows how to rollback the update I will appreciate it.
    Thanks,
    genbaez.

    I just updated my last generation Airport Extreme to the latest release
    We might be confused by last generation. does that mean Gen5??
    If it is Gen5 you roll back by holding down the options key while selecting version.
    All the previous versions applicable to your model should pop up.
    Just select the one you want.. and it will proceed. You get no warning or other chance to stop it.. so choose well. 7.6.1 is IMHO the best when you are going to mix with older products.
    I got about 10x link speed improvement doing extend wireless when I rolled back to 7.6.1 yesterday.
    Also you should stop the airport utility annoying you.. turn off the firmware update reminders so they only happen once a week. Uncheck all of these. Ignore the update warning when it will inevitably happen.

  • How to connect an apple tv to an enterprise network with a username and a password?   I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

    How to connect an apple tv to an enterprise network with a username and a password?
    I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

    Contact the University's IT dept, they may be able to set something up on the network to allow the ATV to connect without the need for a user name/password.

  • How powerful is the Airport Extreme wifi card?

    I was surprised at how many more wireless networks my friend's HP laptop was able to pick up from exactly the same spot in our flat in comparison to my iBook, and that the HP laptop had consistently stronger signals from the networks that I could connect to.
    Is the Airport Extreme fairly underpowered in comparison to other wifi cards?

    I used no tool - the comparison was entirely
    subjective (ie the relative visual 'signal strength'
    scale shown by each system's wireless network tools.
    My friend's HP could consistently see 2, sometimes 3
    more networks than my iBook.
    The HP is also an 802.11g card.
    Good, you're comparing cards that may be compared.
    I am pretty sure the antenna is firmly plugged.
    Good.
    As a general comment - the signal to my wireless
    router is strong and solid - this is not impacting on
    my system use at all, but I was interested to see the
    differences!
    The values displayed by different softwares on different
    systems can't be easily compared. Some use logarithmic
    scales when others use linear ones.
    Many wireless drivers display network names even when
    they receive a usable signal for a few seconds.
    This isn't a proof of performance in real use.
    You may receive a frame out of 5 from an interfering
    network, and your software may decide to display this
    network name.
    I advise you to perform an analysis of your wireless
    neighborhood with a tool like iStumbler.
    iStumbler will clearly show you if you have really
    usable networks, a poor signal level network or
    interfering networks.
    dan    

  • I have a Sony Bravia KDL46W905 TV but I can't get it to connect the Airport Extreme router

    My Sony Bravia KDL46W905 TV won't connect to my Airport Extreme router and the internet. It recognises and picks up my home wireless network though and I'm inputting the correct password but still won't connect. The router is set to WPA2 Personal.
    Anyone any ideas?

    While most devices should connect using WPA2 Personal, please temporarily test using no security to see if the Sony TV will connect that way.
    If it will, then try the more compatible setting of WPA/WPA2 Personal on the AirPort Extreme and test that way.
    However, if the TV will not connect using no wireless security.....then it is a no brainer to conclude that the TV will never connect with security enabled....so more troublehooting is going to be required.
    In that case, make sure that the name of your wireless network......
    Does not exceed 20 characters, fewer would be better
    Does not contain any special characters like an apostrophe, asterisk, dollar sign, etc
    Does not have any blank spaces
    For example, if the current name of your wireless network is something like.....
    rpepler's wireless network
    Change that to read something like.....
    rpeplerwireless
    Same rules for the wireless network password

  • How to connect to airport extreme

    How do I connect to my airport extreme? I need to add a second router to extend the range.

    Please check out the following Apple Support article for details on how to use multiple AirPorts in an extended network.

  • Windows XP laptop can't connect to Airport Extreme used to extend network.

    Have a time capsule for main wireless. PC works fine connecting to it. Have added Airport Extreme to extend network. The mac sees it fine and the PC can connect to it via airport utility but won't connect as wireless and the internet. Running WPA2. Have the latest firmware in each. Any help would be appreciated. Thanks

    Thanks for clarifying. If you don't mind, let's double-check your extended-network setup configuration:
    o Open AirPort Utility and select the Time Capsule (TC), and then, choose Manual Setup from the Base Station menu.
    o Click AirPort in the toolbar, and then, click Wireless.
    o Verify that both “Create a wireless network” from the Wireless Mode pop-up menu and “Allow this network to be extended” checkbox are selected.
    o Next, select the 802.11n AirPort Extreme Base Station (AEBSn), and then, choose Manual Setup from the Base Station menu.
    o Verify that “Extend a wireless network” has been selected from the Wireless Mode pop-up menu. Also verify that the correct Network Name is shown for the network you want the AEBSn to extend.
    Do your settings match these?

  • I have a Cisco router and purchased a 1st generation airport, would like to find outbid I could connect the AirPort Extreme  wireless with a USB wireless, so I can connect to be able to put the airport in another room to beagle to have it close to stereo

    Help setting up airport express. Wireless for streaming

    Cisco Linksey EA4500 dual band,
    Airport express model and serial # 0024369ca089.   6f9075pa2u6
    Ipurchasedan airport it appears to be a 1st generation
    What I am trying to accomplish is to have  the airport close to my sound system so I can play the I tunes through my built in house stereo system,presently the modem and Cisco router are on a different floor

  • Does anyone know how to get the airport extreme to recognize my Slingbox PRO HD?

    When I run the utility for the SlingPlayer it cannot find the slingbox.
    I imagine it has to do with the 10.0.Xx.XX IP address the airport creates so it cannot find the slingbox.
    Any help with this?

    Nevermind. I fiddles and figure it out myself.
    If anyone has a slingbox turn off you norton or other security software to set things up and then turn it back on.
    Slingbox is an awesome product!

Maybe you are looking for

  • Sales Per Person, Per Department Query

    Hi All, I am trying to write a query to allow me to get the Sales Figures per Employee (by Owner Code) per Department. I will then turn this into a Crystal Report so that I can do A Sales Report by Department. I Have this so far : SELECT T0.[DocNum],

  • HT4623 Lost Face Time icon on iphone5 's home page

    Lost Face Time icon on iphone5 's home page , how can I get it back ? Already updated to 7.0.2 before loosing Face Time icon

  • How to make connection less dsn???

    hi! I wanna know how to make connection less dsn in java? any links for help... Bye

  • SP to restrict use of specific activity type to specific user

    Hi experts I am trying to use SP to reserve some Activity types for use of specific user but am unsuccessful. I would be grateful for advice where I am in error? --Restrict use of Visit type activity IF (@object_type='137' OR @object_type='33') AND @

  • Accessing Distributed destination JNDI Names Web

    I am using WebLogic Full Client with Weblogic 10.3. I would like to obtain the JNDI names of the physical members of a Distributed Destination. Weblogic Documentation recommends doing: "you must look up the JNDI name or the member name using the webl