How to Connect the Apogee Duet with Digitech Vocalizer 3

I have been trying to figure out how to interface my guitar and microphone with the Apogee Duet 2 using the Digitech Vocalizer 3 (voice correction). I would like someone from Apple to verify what I have found, but this is how I finally got it to work:
1. Connect you microphone directly to the Vocalizer as shown in the instructions. If you are using a condenser mic, remember to activate the 48v power on the back of the Vocalizer.
2. Set the Vocalizer output to mono (on back of device), and connect one cable from either output port of the Vocalizer to the Input 2 of the Apogee Duet.
3. Use a 1/4" splitter (one mail 1/4" that splits into 2 female 1/4") to attach two standard 1/4" guitar amp cables to the output of your guitar. Connect one of these to the "Guitar In" port on the back panel of the Vocalizer.  Connect the other to Input 1 of the Apogee Duet.
4.  Open the Apogee Maestro Software, and select "Input".  You should see both devices listed (1 and 2). The Apogee will not recognize the Vocalizer as a microphone, so set both of these devices to "Inst". 
5.  Open Garage Band and add both instruments.
6. When you add your guitar, remember to set your Input Source to "Mono 1" and turn the Monitor On so you can hear it through your hed phones. Also, make sure you have the headphone Icon selected on the Instrument panel.
6.  When you add you Vocalizer (Instrument 2), select "Vocals" and "no effects". Remember to set your input source to "Mono 2" and turn your Monitor On so you can hear it through your hed phones. Also, make sure you have the headphone Icon selected on the Instrument panel.
7. If you want to hear and record both instrumental tracks, go the "Track" menu and select "Enable Multi-Track Recordning."
In summary, the Apogee Duet does not appear to recognize the Vocalizer as a microphone, so you have to set up the connection from the Vocalizer to the Duet as another instrument.

#3 Can't you just plug your guitar into the Vocalizer's guitar in jack and then use the guitar thru jack to the apogee?

Similar Messages

  • How to connect the IPad 2 with an HTC desire HD (mobilephone)

    Hello,
    I need your advice. I'm trying to connect my IPad 2 with may HTC desire HD via bluetooth. The tools are paring but do not conncet alt least. What can I do?

    What can I do?
    Nothing.  iOS does not support pairing to devices other than keyboards, headphones and headsets.

  • Satellite M40-237: How to connect the mobile phone with Bluetooth

    I have a new Noki 62333 and I have a Satellite Toshiba M40- 237. I have a big problem with the conection between them. I don t know how to turn on bluetooth on my pc. Can you help me????

    Hello Iva
    A friend of mine has Satellite M40 and I know that this unit is delivered without BT module. If the unit has BT module you will find BT label on the bottom side of your notebook.
    To establish BT connection with his mobile phone he uses BT USB stick.
    By the way: does Iva comes from Zagreb, Croatia?
    Bye

  • How to connect an apple tv to an enterprise network with a username and a password?   I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

    How to connect an apple tv to an enterprise network with a username and a password?
    I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

    Contact the University's IT dept, they may be able to set something up on the network to allow the ATV to connect without the need for a user name/password.

  • How to connect my macbook air with thunderbolt to tv via hdmi?

    How to connect my macbook air with thunderbolt to tv via hdmi?

    With this adapter. You will also need an HDMI cable.
    The Thunderbolt port doubles as a mini DisplayPort on the MBA.

  • How to connect to wifi prompt with Apple TV?

    To connect to wifi in public locations (e.g., Starbucks, hotels), you often have to click an "I agree" button after selecting the network.  For business presentations in hotels and other venues, I carry an Apple TV with me.  I connect the Apple TV to a big screen TV at the venue, then use my iPad to present content on the TV.  You will know that the Apple TV and the iPad have to be on the same wifi network in order for this to work.  But in locations that require an "I agree" in order to connect to the local wifi network, I do not know how to connect the Apple TV to the wifi network.  Is there a way to see/accept the "I agree" button when connecting the Apple TV to the network?

    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button.

  • Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

    pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

    Dear Valued Pioneer Customer:
    We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device.  If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
    This firmware update may be used only with the following 2012 Pioneer products:
    CD Receivers
    DVD Receivers
    DEH-P8400BH
    DEH-P9400BH
    DEH-80PRS
    AVH-P2400BT
    AVH-P3400BH
    AVH-P4400BH
    AVH-P8400BH
    In order to perform this update, the following items are needed:
    A Pioneer CD or DVD Receiver above with built-in Bluetooth
    Laptop with built-in Bluetooth running Windows® 7
    Bluetooth firmware update (HW05-SW01.27.20)
    How to Obtain the Free Firmware Update
    1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
    2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
    You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
    How to Determine if the Firware Update has Already been Installed
    CD Receivers:
    • With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
    DVD Receivers:
    • With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
    If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
    Questions
    If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
    Sincerely,
    Pioneer Electronics (USA) Inc.

  • How to connect a USB-6008 with lookout6.0?

    hi >>>
    I am a student in electrical and computer department, i want to ask about
    How to connect a USB-6008 with lookout6.0 if thats possible?Could you
    provide some help?
    Regards
    Manal

    Hi Manal there is a way to do this, DAQ or DAQmx drivers have an OPC server, you can find the detailed information in the next link
    http://digital.ni.com/public.nsf/websearch/13BBC10CCC1FECBA8625720B00823140?OpenDocument
    Best Regards
    Benjamin C
    Senior Systems Engineer // CLA // CLED // CTD

  • TS1986 how to connect usb optical mouse with scroll to mac

    hey its manish hea
    please can i get to know how to connect usb optical mouse with scroll so tat it can be used for AUTOCAD 2011
    i connected the mouse but its not working
    please suggest

    Welcome to the Forum!
    Well, there is no big deal about USB mouse, it's plug and play.If your mouse doesn't work at all, then its broken, or it's not compatible with mac. Test it in a PC.

  • How to connect MS-sql server with SAP BW

    hi all,
    i want the connection procedure to how to connect MS-sql server with SAP BW.so that i can extract the data from ms sql server and can create cubes using that data.please help me in this issue.

    Hi Vamshi,
    Go through this DOC it explains u how to connect to other data bases like SQL...
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff]
    this is a thread related to connect the SQL server..
    [DB Connect MS SQL Server;
    Regards,
    NR
    Assign points if helpful...

  • Does any body know how to connect the fingerprint scanner using jmf is it p

    Hai,
    I am not getting how to connect the fingerprint scanner how we can do it is it possible for device independent application
    If any body knows anything about this please mail me its very urgent for me
    hope u will be able to tell me something about this .
    Regards
    K Naveen Kumar

    Hi,
    Fingerprint scanners are not popular enough devices to be supported by Java yet. There's no general API or Java interface for it.
    Each manufacturer of a fingerprint device will probably just ship their own drivers or SDKs. More than likely DLL's, so you'd need to write some JNI to call them.
    If you want to allow your application to work with multiple devices, you will have to design it to do that. Ie. write a general "Fingerprint" interface, and write a class which implements that interface for each device you want to support.
    Eg.
    public interface FingerPrintAPI
         public void initialiseScanner ( )
                throws MyScannerException;
         public byte[] getFingerPrint ( )
                throws MyScannerException;
         public double getMatchProbability ( byte[] fingerprint1, byte[] fingerprint2 )
                throws MyScannerException;
         public void closeScanner ( )
                throws MyScannerException;
    }I haven't used a fingerprint device at all, but that's how I would approach it.
    regards,
    Owen

  • How to connect 2 iPod classics with bluetooth

    I am trying to sync photos between 2 iPod classics, iPad4 and iphone 5 with blue tooth. The only devices that are seeing each other is the iPhone and iPad but still hasn't' synced the photos. Why re the apple devices not able to see each other?

    Havilah Farm wrote:
    Why re the apple devices not able to see each other?
    Because that's the way Apple have designed it. They have used a particular Bluetooth protocol that is designed to allow audio to be transmitted to Bluetooth headphones or Bluetooth speakers (for example) and some peer-to-peer gaming between the devices, but not the transfer of files.
    To transfer photos, Sync them via your iTunes programme. If you took the photos on the device, transfer them to your computer first and then Sync them with the other devices. For photos that were not taken on the device, they presumably were Synced from your computer originally, so simply Sync them to your other devices from the computer.
    By the way, your subject question: "how to connect two iPod Classics with Bluetooth"...
    You cannot. The Classic does not have Bluetooth.

  • How do Connect the JAUD on a 915P Combo

    How do Connect the JAUD on a 915P Combo MB
    I have a case with a front panel. The wires are named:
    2 wires "SPK R" (2 connecters on the same wire) Red wire
    2 wires "SPK L" (2 connecters on the same wire) White wire
    1 wire "GND" (Grund) Black wire
    1 wire "M IN" (Microphone) Green wire
    1 wire "M Bias" (Microphone) Blue wire

    not sure ive looked at the main board manual  and my new blower case has the same front audio hook ups but i was not able to locate the connections  useing the mainboard manual that came with my main board im still wondering about how to connect the front audio  my self !  915p combo-fr

  • Connect the music file with the artwork file post-computer-crash?

    I want to retrieve artwork after restoring my computer?
    So my computer (where itunes app data was stored) and my external hardrive (where my itunes library was stored) crashed, but luckily I had my itunes library was stored on dropbox so I have that uploading to my revived computer!
    I have access to all my "old computer's" files (via a mounted image file that looks just like an external drive H: )
    The "old computer" itunes used my dropbox folder for the library (J:work\Dropbox\Allen's Transfer Folder\iTunes)
    my "New comuter" uses a local folder but the contents are exactly the same (C:\Companies\Dropbox\Allen's Transfer Folder\iTunes)
    How can I get the artwork data from my "old computer" onto my "new computer" so that itunes will connect the music file with the artwork file?
    is there a data file and will they automatically sync to the artwork if they are in different locations?
    Thank you for your help, Allen

    pfanzier wrote:
    … is there any reason i shouldn't delete the artwork folder?
    All of my music is from CDs, so all of my cover art are scanned images that I added to the music files in iTunes. My Album Artwork folder is heavily populated nonetheless. Thus, it stands to reason that if you delete the folder, just like every other default item in your iTunes folder it will be recreated when you launch iTunes. If I recall correctly, that folder also holds the data files for building your CoverFlow.
    pfanzier wrote:
    itunes only demarcates songs whose files are missing with an exclamation point after i click on the song. otherwise everything appears as normal. if i quit itunes and reopen it, nothing is marked with the exclamation point until i click on it.
    I personally have never had an issue with missing song links, but based on what I had read on the Macworld forums over the years, when links are lost, people start seeing /!\ next to several tracks in their iTunes library. Of course, most of the instances that I have read about have been after iTunes updates so perhaps it is during the library updating after a software update that causes the automatic detection of broken links. Otherwise, it does make sense that iTunes would not check a link until the user selects an unlinked song, because iTunes does not, and should not, scan your entire library for no apparent reason.

  • My ipad 3 is frozen on the plug into itunes page. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (there is no usb port on an ipad). If anyone could help it would be appreciated.

    My ipad 3 is frozen on the plug into itunes page - it won't turn off or on - just stuck. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (the advice is to connect ipad to mac and there is no usb port on an ipad). If anyone could help it would be appreciated. Going nuts.

    I think you should probably also read the iPad User Guide. You didn't say what version of iOS your iPad is running, so here's the links to both the iOS 6 and iOS 7 (PDF) versions:
    iPad User Guide for iOS 6
    iPad User Guide for iOS 7

Maybe you are looking for