How to connect the I-Trigue 5600 to a DVD player???

I got a set of I-Trigue 5600 and thinking of connecting all 5 speakers and woofer to the back of DVD player to get the surround effect when watching DVD. The problem is I can just plug all 5 speakers to the back of the DVD player but how can I connect the sub-woofer to the DVD player as there is no cable to connect them together? Is there some sort of cable or adapter I can buy to connect them together? Thx in advance for any help!!!

have you tried that setup already?
my guess is that the subfrequencies are still combined with the front channels, and if I correct, your speakersystem will redirect them to the sub. just give it a try.
regards

Similar Messages

My ipad 3 is frozen on the plug into itunes page. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (there is no usb port on an ipad). If anyone could help it would be appreciated.

My ipad 3 is frozen on the plug into itunes page - it won't turn off or on - just stuck. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (the advice is to connect ipad to mac and there is no usb port on an ipad). If anyone could help it would be appreciated. Going nuts.

I think you should probably also read the iPad User Guide. You didn't say what version of iOS your iPad is running, so here's the links to both the iOS 6 and iOS 7 (PDF) versions:
iPad User Guide for iOS 6
iPad User Guide for iOS 7

How to connect an apple tv to an enterprise network with a username and a password? I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

How to connect an apple tv to an enterprise network with a username and a password?
I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

Contact the University's IT dept, they may be able to set something up on the network to allow the ATV to connect without the need for a user name/password.

Does any body know how to connect the fingerprint scanner using jmf is it p

Hai,
I am not getting how to connect the fingerprint scanner how we can do it is it possible for device independent application
If any body knows anything about this please mail me its very urgent for me
hope u will be able to tell me something about this .
Regards
K Naveen Kumar

Hi,
Fingerprint scanners are not popular enough devices to be supported by Java yet. There's no general API or Java interface for it.
Each manufacturer of a fingerprint device will probably just ship their own drivers or SDKs. More than likely DLL's, so you'd need to write some JNI to call them.
If you want to allow your application to work with multiple devices, you will have to design it to do that. Ie. write a general "Fingerprint" interface, and write a class which implements that interface for each device you want to support.
Eg.
public interface FingerPrintAPI
     public void initialiseScanner ( )
            throws MyScannerException;
     public byte[] getFingerPrint ( )
            throws MyScannerException;
     public double getMatchProbability ( byte[] fingerprint1, byte[] fingerprint2 )
            throws MyScannerException;
     public void closeScanner ( )
            throws MyScannerException;
}I haven't used a fingerprint device at all, but that's how I would approach it.
regards,
Owen

How do Connect the JAUD on a 915P Combo

How do Connect the JAUD on a 915P Combo MB
I have a case with a front panel. The wires are named:
2 wires "SPK R" (2 connecters on the same wire) Red wire
2 wires "SPK L" (2 connecters on the same wire) White wire
1 wire "GND" (Grund) Black wire
1 wire "M IN" (Microphone) Green wire
1 wire "M Bias" (Microphone) Blue wire

not sure ive looked at the main board manual and my new blower case has the same front audio hook ups but i was not able to locate the connections useing the mainboard manual that came with my main board im still wondering about how to connect the front audio my self ! 915p combo-fr

How to see the England football. Which kind of player can I download?

How to see the England football and which kind of player can I download

Thank you to all for your answers.
I will try with getjar.
I have one more question concerning the installation of the applications.
I have Nokia PC Suite installed on my computer and a blutooth connexion with my phone.
Could someone tell me how I have to proceed ?
For example, I would like to install "KODi English-French Dictionary" (http://www.getjar.com/products/14408/KODiEnglishFrenchDictionary). On this web page, it is proposed to me to download a Jad file and a Jar file. Do I have to download both ?
Fab

How do I show my keynote file on a dvd player and control the slides?

how do I show my keynote file on a dvd player and control the slides with the skip or next chapter command on the dvd remote? when I export to quicktime, it changes slides on a timed basis. I want the chapter button on a dvd remote to act like a mouse click would.

Hi Robert
You have to export the individual slides from your Keynote presentation, and then import them into your DVD application.
I use DVDStudioPro - it works fine this. I'm sure iDVD will be OK.Going via QT has never worked for me.
Regards Robert
G4(7 y.o)1.5GHz 1.25 GB Ram, 2x120GB intHD, orig AGP & Radeon 9200 PCI card Mac OS X (10.4.8) 2monitors, CRT TV, FCP5.0.4, DVDSP4.1.1, STP1.1, Comp2.3, LT2.1, QT7.1.3

Using mac book "the late plastic white one ) like DVD player

Using mac book "the late plastic white one ) like DVD player I can't the movie but only the standard desktop immage, and not the movie or the immage I choose from mine 4 the desktop.
I use an adaptator 4 HDMI port to the TV

In System Preferences>Displays look for an option to "mirror" displays. If the checkbox is blank, click on it. Now you should be able to see the movie on the TV.
~Lyssa

How to connect the iPad to a TV?

I see that the Netflix app can now output from the iPad.
We would like to show movies on our television. Is the "Apple iPad Dock Connector to VGA Adapter" the accessory to buy? Is there something else we'd need?
We have older TV sets and use RCA component cables to input feeds. (You know, the old red-yellow-white cables.) (That's how our Tivo connects.)
Currently, we connect our MacBook Pro to the TV using Apple's "DVI TO VIDEO ADAPTER KIT-GEN M9267G/A". You just plug a RCA cable into it and run that into the video input jack on the TV. You run another cable from the headphone jack on the MBP to the TV's audio. I realize that connector wouldn't work with an iPad, but what would?
Our sets are standard definition (definitely not HD).

The VGA adaptor delivers the best resolution of the 3 possible "video-out" solutions that Apple offers. Now that both Netflix and Air Video have reved their apps to do video out it seems like the next natural thing is to figure out how to convert the VGA out to an HDMI signal so we can send movies from our iPad to our TVs. There are meny VGA > HDMI converters and I have tried the Atlona VGA to HDMI Scaler/Converter (USB Powered). Model: AT-HDVieW as I saw it mentioned (http://bit.ly/c5U7nv) as a specific match to the iPad. It didn't work. There is no setting on the iPad to send video out rather than display it on its own screen. It switches automatically when it senses "something" attached to the VGA adaptor. This "sensing" works flawlessly when connected to a real VGA monitor but I'm guessing that the Atlona converter is not sending the needed signal back to the iPad to trigger it to dump the video. Will someone please pick up this ball so we can solve this? Other possibilities abound. Here's a few http://bit.ly/d4jgkD and http://bit.ly/asc4RJ THANKS!!

How to Connect the Apogee Duet with Digitech Vocalizer 3

I have been trying to figure out how to interface my guitar and microphone with the Apogee Duet 2 using the Digitech Vocalizer 3 (voice correction). I would like someone from Apple to verify what I have found, but this is how I finally got it to work:
1. Connect you microphone directly to the Vocalizer as shown in the instructions. If you are using a condenser mic, remember to activate the 48v power on the back of the Vocalizer.
2. Set the Vocalizer output to mono (on back of device), and connect one cable from either output port of the Vocalizer to the Input 2 of the Apogee Duet.
3. Use a 1/4" splitter (one mail 1/4" that splits into 2 female 1/4") to attach two standard 1/4" guitar amp cables to the output of your guitar. Connect one of these to the "Guitar In" port on the back panel of the Vocalizer. Connect the other to Input 1 of the Apogee Duet.
4. Open the Apogee Maestro Software, and select "Input". You should see both devices listed (1 and 2). The Apogee will not recognize the Vocalizer as a microphone, so set both of these devices to "Inst".
5. Open Garage Band and add both instruments.
6. When you add your guitar, remember to set your Input Source to "Mono 1" and turn the Monitor On so you can hear it through your hed phones. Also, make sure you have the headphone Icon selected on the Instrument panel.
6. When you add you Vocalizer (Instrument 2), select "Vocals" and "no effects". Remember to set your input source to "Mono 2" and turn your Monitor On so you can hear it through your hed phones. Also, make sure you have the headphone Icon selected on the Instrument panel.
7. If you want to hear and record both instrumental tracks, go the "Track" menu and select "Enable Multi-Track Recordning."
In summary, the Apogee Duet does not appear to recognize the Vocalizer as a microphone, so you have to set up the connection from the Vocalizer to the Duet as another instrument.

#3 Can't you just plug your guitar into the Vocalizer's guitar in jack and then use the guitar thru jack to the apogee?

How to connect the Satellite Pro P100 to Hifi

I've got Satellite Pro P100. How to connect this notebook to HiFI
This is probably easy, but what can i say... just call me stupid.
I've got the lead that goes out of the headphone jack, it links up to my hifi nice.
Trouble being, there's a nasty hiss in the background. Tried plugging my boys mp3 player into the lead, and that works fine.
Any chance of some help... thanks

Hi
In my knowledge you can connect the Sat Pro P100 to HiFi only via a 2-RCA Audio Y cable adapter. In my knowledge the notebook does not support the S/PDIF audio out so you will be able only to use an analog sound port.
You could also buy a stereo adapter with 2x cinch jacks to connect the notebook to the Hifi. Such adapter can be plugged into the headphone jack
Check this:
stereo adapter
I think you should visit the nearest notebook dealer. He can show you the right and supported cables and adapters.

How to use an external start button for 6024E w/ sc-2345, I would like it to function like a start button in LabView but I don't know how to connect the external button to the sc-2345's connector block

I am confused as to how to connect my external start botton. I would like it to function like a start button on a front panel of a VI. I would like to use the +5V on pin 14 but I really don't know where to go from here. Any guidence for a novice would be most appreciated.

phod,
This is the LabVIEW Real-Time forum, so I suggest that in the future that you post this type of question to the Multifunction DAQ forum.
For the simplest solution you will have to connect your button to a digital line of your board, consult the sc-2345 user manual for a diagram of where these lines are exposed. You will have to connect your start button in series with a line that is high, such as your 5V pin or another digital line. Then connect this to a digital line that will be your start trigger.
Your program can poll the digital line that is connected to your button in a while loop and when it goes high, it lets the rest of the program execute. For the programming, I suggest you take a look at the shipping examples that come with LabVIEW. If yo
u have LabVIEW 7.0 go to Help>>Find Examples. Open Hardware Input Output>>Traditional DAQ>>Digital Input and Output>>E Series for some examples of digital I/O programming with E-series boards.
Hope that gets you started.
Gerardo

How to connect the two field which have a diffrent length

Hi,
 i have two table one is VBRP-VGBEL CHAR 10
 second is MKPF-XBLNR CHAR 16
both are same data means vgbel eq xblnr.
how to connect these table because when i connect these table it gives me error
have a same type and length.
please give me reply soon . Thanks.
dinesh

HI
I GOT THE SAME PROBLEM AT THAT TIME I DONE LIKE THIS
I THINK IT MAY HELPFULL FOR YOU
OBJID = 6 CHAR
SOBID = 40 CHAR
I GOT THE SAME ERROR WHAT YOU GET
I NEED ONLY 6 CHAT SO THAT WHY I HAD WROTE THIS LOGIC
1ST I HAD DECLARED THE SAME STRUCTURE TWICE
IN FIRST ONE IT IS NORMAL DECLARATION
IN SECOND ONE I HAD DECLARED THAT 2 FIELDS AS THE SAME LENGTH
I HAD PUT THAT IN THA BOLD LETTERS
AND AFTER THAT I HAD LOOPES THAT WORK AREA AND CONVERTED THAT SZE
REWARD IF USEFULL
TYPES : BEGIN OF ST_HRP1001,
 OTYPE TYPE HRP1001-OTYPE,
 OBJID TYPE HRP1001-OBJID,
 RELAT type hrp1001-RELAT,
 BEGDA TYPE HRP1001-BEGDA,
 ENDDA TYPE HRP1001-ENDDA,
 SCLAS TYPE HRP1001-SCLAS,
 SOBID TYPE HRP1001-SOBID,
 END OF ST_HRP1001.
TYPES : BEGIN OF ST_SOBID,
 OTYPE TYPE HRP1001-OTYPE,
 OBJID TYPE HRP1001-OBJID,
 RELAT type hrp1001-OBJID,
 BEGDA TYPE HRP1001-BEGDA,
 ENDDA TYPE HRP1001-ENDDA,
 SCLAS TYPE HRP1001-SCLAS,
 SOBID TYPE HRP1001-OBJID,
 END OF ST_SOBID.
SELECT OTYPE
 OBJID
 RELAT
 BEGDA
 ENDDA
 SCLAS
 SOBID FROM HRP1001 INTO TABLE IT_HRP1001
 WHERE OTYPE = 'D'
 AND OBJID IN S_OBJID
 AND BEGDA GE DATE-LOW
 AND ENDDA LE DATE-HIGH
 AND ( SCLAS = 'E' OR SCLAS = 'ET' ).
IF SY-SUBRC NE 0.
 MESSAGE 'NO RECORD FOUND FOR THE GIVEN SELECTION CRITERIA ' TYPE 'E'.
ENDIF.
LOOPING TO CONVERT THAT FIELD LENGHT
 LOOP AT IT_HRP1001 INTO WA_HRP1001.
 WA_SOBID-OTYPE = WA_HRP1001-OTYPE.
 WA_SOBID-OBJID = WA_HRP1001-OBJID.
 WA_SOBID-RELAT = WA_HRP1001-RELAT.
 WA_SOBID-BEGDA = WA_HRP1001-BEGDA.
 WA_SOBID-ENDDA = WA_HRP1001-ENDDA.
 WA_SOBID-SCLAS = WA_HRP1001-SCLAS.
 WA_SOBID-SOBID = WA_HRP1001-SOBID.
 APPEND WA_SOBID TO IT_SOBID.
ENDLOOP.
SELECT OTYPE
 OBJID
 AEDTM
 UNAME
 DELET
 CANCR
 NCONT
 FROM HRP1026
 INTO TABLE IT_HRP1026
 FOR ALL ENTRIES IN IT_SOBID
 WHERE OBJID = IT_SOBID-SOBID
 AND ( OTYPE = 'E' OR OTYPE = 'ET' )
 AND DELET = 'X' AND
 BEGDA GE DATE-LOW AND
 ENDDA LE DATE-HIGH.

HT4145 how to connect the i pod to airport extreme

I am trying to figure out how to connect to my airport extreme from my ipod- anyone who can give me a stepby step answer?
I am not sure which operating system it is...
Thanks!

If the AirPort Extreme is allowing other devices to connect, it is not the issue.
Follow the iOS Troubleshooting Guide for Wi-Fi Networks and Connections
http://support.apple.com/kb/TS1398
You will be better served to post in the iPod support area for questions about the iPod. Post here:
iPod

How to connect the Liquid Mix?

Hi, I'm thinking about adding a Liquid Mix to my rig, but I only have 1 FW 400 port, used by the Duet. The HD goes in the FW 800. How can I connect the Liquid Mix to my Powerbook? Can I use a PC Card? Which one? Will this bring me latency problems in Logic 8? Thanks!

firewire pc-card, that way it gets it's own firewire bus which it pretty much needs. Just using an audio interface for stereo playback on the same bus I had to set the thing to 24 channels instead of 32 to get rid of bandwidth problems.

How to connect the I-Trigue 5600 to a DVD player???

Similar Messages

Maybe you are looking for